ISO/TC 211 Geographic information/geomatics

Similar documents
D R A F T. ISO/TC 211 N 31xx. ISO/TC 211 Geographic information/geomatics Number of pages: 9

ISO/TC 211 Geographic information/geomatics

ISO/TC 211 Geographic information/geomatics Secretariat: SN (Norway)

ISO/TC 211 Geographic information/geomatics

ISO/TC 211 Geographic information/geomatics Secretariat: SN (Norway)

ISO/TC 211 N 4714 Resolutions from the 45th ISO/TC 211 plenary meeting in Wellington, New Zealand,

Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:

AGI and British Standards Committee (IST/36) Geographic Information Business Plan 2015

ISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:

2. Regarding the Withdrawal of ISO/IEEE Projects from the TC 215 Program of Work

RESPONSE REQUESTED. Notice of December 2017 TC130 Working Groups Meetings

ISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL

Yoshikazu Tanabe On behalf of Mr.Shigeo AIBA

WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA

December Volume 19 Issue 02

International Standards Health Informatics. Audrey Dickerson, RN, MS ISO/TC 215 Secretary

Standards Solution. What it is and how to use it. July 2017

FIIRSM, GIOSH, RSP, OSHCR,

STANDARDISATION OF SRF (ISO/TC 300)

Resolutions from the Plenary Meeting of ISO/TC215 Health Informatics Kuopio Finland 27 May 2011

Status report to ISO/TC204 October 2012

ISO/TC 207 COMMUNIQUÉ

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved

CEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)

DRAFT MEETING MINUTES. Dated Reference ISO/TC 215/ WG7 N 0297 ISO/TC 215 PLENARY AND WG MEETINGS ISO/TC215 HEALTH INFORMATICS WG7 DEVICES

CEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action

Report. CEN/TC 55 Dentistry

BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY

CEN/TC 442 Decisions taken /16

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

ISO INTERNATIONAL STANDARD

Cooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring

The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.

ISO INTERNATIONAL STANDARD

ISO Coordinate Reference Systems Registry

STANDARDS RELATED MEETING REPORT

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

BUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD

buildingsmart Summit, Opening plenary session

Activities of International Standards Organization (ISO) TC211 and TC172 with respect to Geodetic References

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

European Standardization for the Natural Gas Infrastructure

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

Doc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine

International standards used locally worldwide ISO/TC 67

CEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

Final Business Plan for a CEN Workshop on

STRATEGY PLAN ISO/TC 34/SC 17 Management systems for food safety

CEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

Introduction to ISO and ISO membership

ISO INTERNATIONAL STANDARD

FOLLOW UP SOURCE. Australian National Body / SA Report to TC46 Plenary 2015 Z41A. ISO TC 46 "Information and documentation"

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

EUROPEAN VEGETATION SURVEY 22 nd Workshop Roma 9-11 April 2013

ISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences

The Addressing project by the International Organization for Standardization (ISO) by Serena Coetzee at Addressing the Future,

International and European standardization of Nanomaterials

ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies

Confused by standards Standards for social alarms

ISO/TC 249: past, present and future

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing

Progress in American and international. regarding woodworking machinery. LAS VEGAS, July 25th voluntary «TECHNICAL SIDE» of machinery safety

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

IEC TC 62: Overview & Work Program

Standardisation activities in the field of HMI for road vehicles

IFLA KM Section Leaders Team: Roles and Responsibilities Purpose 1. Composition of Knowledge Management Section Leaders Team (KM Leaders)

ISO/TC 30 Standards. Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method

ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Athens, Greece

EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

Report from JCWG TC82/TC21/TC88/TC105/64

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD

Introductive seminar International Workshop_atelier/terrain

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

Technical standards to support the evolution of technology enabled care services

ISO/TC 249 Newsletter

Urban Allotment Gardens in European Cities COST Action TU1201

ISO 14004:2004, Environmental Management Systems - General Guidelines On Principles, Systems And Support Techniques By ISO/TC 207/SC 1 READ ONLINE

ISO/TC 212 N334 (RESOLUTIONS) MEETING REPORT. Prof Stewart Bryant. Transfusion Medicine Specialist. Australian Red Cross Blood Service

Transcription:

2009-11-06 Number of pages: 6 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 29th ISO/TC 211 plenary meeting in Quebec City, Canada 2009-11-05/06 ISO/TC 211 plenary Expected action: For information Type of document: Resolutions Meeting date/location: 2009-11-05/06, Quebec City, Canada Hyperlink: http://www.isotc211.org/opendoc/211n2828/ ISO/TC 211 Secretariat Telephone: + 47 67 83 86 71 Telefax: + 47 67 83 86 01 Standards Norway Strandveien 18 E-mail: bjs@standard.no P.O. Box 242 NO-1326 Lysaker, Norway URL: http://www.isotc211.org/

Resolutions of the 29th plenary meeting of ISO/TC 211 Quebec City, Canada, 2009-11-05/06 Resolution 477 In remembrance of Professor Hans Knoop ISO/TC 211 wishes to express its deep regret and sorrow at the loss of our colleague and friend Professor Hans Knoop on 8 October 2009. ISO/TC 211 expresses its gratitude for the years that we knew Hans, for the friendship we shared with him, and his contribution to, and hard work for the committee. We are grateful and proud for having known him as a professional and enthusiastic colleague. We ask those that were close to him, and know his family and friends at home, to convey our sincere sympathy and warmth, and assure them of our high regard for Hans. Resolution 478 Reappointment of the ISO/TC 211 Chairman ISO/TC 211 endorses the Secretariat's nomination of Mr. Olaf Østensen as the Chairman of ISO/TC 211 for a further period of three years, and instructs the Secretariat to inform the ISO Technical Management Board about this decision. Resolution 479 Registration of new projects ISO/TC 211 confirms that the following projects have been approved by the ISO/TC 211 members and shall be added to the programme of work: New project (Stage 20.99): 19101 Geographic information Reference model Submitted by: NB of Canada Project Leader: Dr. Jean Brodeur, Canada The project will report directly to the plenary. New project (Stage 00.60): 19160 Addressing Submitted by: NB of South Africa Project Leader: Dr. Serena Coetzee, South Africa The project is assigned to WG 7. Resolution 480 Registration of ISO/CD 19148, Geographic information Linear referencing as DIS Noting that the USA withdraws their objection, given in document N 2781, ISO/TC 211 instructs the secretariat to forward document N 2759 to the ISO Central Secretariat for issuing as DIS. 2

Resolution 481 Ad hoc group on XML ISO/TC 211 expresses their appreciation to the ad hoc group on XML and the convenor Mr. John Hockaday for their work and the report in document N 2787. ISO/TC 211 resolves to disband the group. Resolution 482 Establishment of an XML maintenance group ISO/TC 211 resolves to establish an XML maintenance group to ensure that the XML used in ISO/TC 211 projects is maintained and made accessible. ISO/TC 211 instructs the XML maintenance group to draft terms of reference for presentation at the 30th plenary. ISO/TC 211 instructs the secretariat to distribute a call for chair and membership of the group before the end of November 2009. Resolution 483 Ad hoc group on strategy for configuration management and backwards compatibility ISO/TC 211 resolves to establish an ad hoc group on strategy for configuration management and backwards compatibility. ISO/TC 211 instructs the secretariat to distribute a call for chair and membership of the group before the end of November 2009. The ad hoc group shall report to the 30th plenary. Resolution 484 Establishment of liaison with the Organization for the Advancement of Structured Information Standards (OASIS) ISO/TC 211 appreciates the establishment of a category A liaison with the Organization for the Advancement of Structured Information Standards (OASIS), according to the result of the written ballot in document N 2764. Resolution 485 Approval of liaison request from Energistics ISO/TC 211 appreciates and accepts the request for a category A liaison from Energistics, and instructs the secretariat to inform the ISO Central Secretariat of its approval. 3

Resolution 486 CEN/ISSS Workshop ELSSI EMG ISO/TC 211 appreciates the request for a liaison from the CEN/ISSS Workshop ELSSI EMG (Economics and logistics of standard-compliant schemas and ontologies for interoperability of engineering materials data) in terms of the Vienna Agreement, and ISO/TC 211 welcomes the cooperation with CEN/ISSS Workshop ELSSI EMG. ISO/TC 211 instructs the secretariat to establish contact with the Workshop. Resolution 487 Strategy and Business Plan Referring to Resolution 471 at the 28th plenary, ISO/TC 211 endorses the chairman's request to extend the deadline to the next plenary, for the sub-group of the Advisory Group on Strategy to develop a new strategy document and to revise the ISO/TC 211 Business Plan. Resolution 488 Appointment of liaison representatives ISO/TC 211 appreciates the nominations from the members of liaison representatives. The following are confirmed/appointed as liaison representatives: Mr. Roger Lott, United Kingdom, to OGP Mr. Stefan Strobel, Germany, to DGIWG Mr. Antony Cooper, South Africa, to ICA Dr. Serena Coetzee, South Africa, to OASIS Mr. Antony Cooper, South Africa, to UN ECA Mr. Antony Cooper, South Africa, to ISO/TC 69 Mr. Antony Cooper, South Africa, to ISO/TC 154 Dr. Jean Brodeur, Canada, to PAIGH 4

Resolution 489 Adjustment of target dates of the ISO/TC 211 programme of work Bold = Delivered documents Project no WG WD CD DIS FDIS IS/TS 19101 Rev. 2010-12 2011-06 2012-06 2012-12 19103 Rev. 9 2009-01 2010-01 2011-01 2011-07 19110 Amd. 1 7 2006-08 PDAM FDAM 2010-01 2007-04 2009-08 19115 Rev 7 2010-06 2010-12 2011-12 2012-06 19117 Rev. 4 2007-02 2009-11 2010-06 2011-06 2011-12 19118 Rev. 4 2007-01 2009-10 2010-10 2011-02 19125-1 4 2010-01 2010-07 2011-07 2012-01 19125-2 4 2010-01 2010-07 2011-07 2012-01 19130 6 2008-07 TS 2009-12 19131 Amd 1 9 2009-07 2009-12 2010-12 2011-06 19142 4 2005-05 2006-12 2009-03 2010-03 2010-09 19143 4 2005-05 2007-01 2009-03 2010-03 2010-09 19144-2 7 2005-11 2007-01 2010-06 2011-06 2012-01 CD 2: 2008-07 19145 9 2008-11 2009-07 2010-01 2011-01 2011-07 19146 9 2006-08 2007-11 2008-12 2009-12 2010-06 19147 10 Stage 00.60 19148 10 2007-07 2009-01 2009-11 2010-11 2011-05 19149 4 2008-07 2009-11 2010-11 2011-05 19150 7 Stage 00.60 19151 10 2009-10 2010-07 2011-07 2012-01 19152 7 2009-07 2010-01 2011-01 2011-07 19153 9 2009-09 2010-06 2011-06 2011-12 19154 10 Stage 00.60 19155 10 2009-10 2010-02 2010-08 2011-08 2012-02 19156 9 2008-09 2009-01 2010-06 2011-06 2011-12 19157 9 2009-01 2009-12 2010-06 2011-06 2011-12 19158 9 2009-02 2010-07 TS 2011-05 19160 7 Stage 00.60 Resolution 490 Requirements concerning subsequent meetings ISO/TC 211 adopts the following meeting schedule: 30th plenary 2010-05-27/28 Southampton, United Kingdom 31st plenary 2010-12-09/10 Canberra, Australia 32nd plenary 2011-05/06 The Netherlands* 33rd plenary 2011-10/12 South Africa* *Provisional Facilities for WG meetings, editing committees, project team and other meetings will be provided for the three days prior to each plenary. Provisions for a workshop for the local geographic information community may be provided before or during the meeting week. 5

Appreciations ISO/TC 211 expresses its appreciation to the Canadian Advisory Committee to ISO/TC 211, Standards Council of Canada, for hosting the meetings, and for providing the committee with excellent meeting facilities at the Hotel Plaza Quebec. ISO/TC 211 expresses its appreciation to the organizing committee, Dr. Jean Brodeur, Dr. Mohamed Habbane, Mr. Paul Egesborg, Ms. Monique Duquette, Ms. Roz Waddell, Ms. Christine Geraghty for their preparation of the meeting. ISO/TC 211 expresses its appreciation to Ms. Monique Duquette, Ms. Marie-Josée Proulx, Ms. Hélène Tétreault, Mr. Keith O' Brien and Mr. Martin Nadeau for their support to the delegates during the meeting. ISO/TC 211 expresses its gratitude to the sponsors for their support to make the arrangement possible: GeoConnections, Ressources naturelles et Faune Québec, Natural Resources Canada, Bentley, Compusult Limited, DMR (A Fujitsu Company), ESRI Canada, Galdos Systems Inc., GeoBase, SPARX systems, Faculté de foresterie, géographie et géomatique and Dépatement de Géomatique de l'université Laval, SAFE Software, CubeWerx, Geoide Network and Pôle Québec Chaudière-Appalaches. ISO/TC 211 expresses its gratitude to Dr. Mohamed Habbane and Mr. Paul Egesborg for their preparation of the Standards in Action and LADM Workshops on Wednesday. ISO/TC 211 further expresses its appreciation to Dr. Robert Beauregard, Faculté de foresterie, de géographie et de géomatique, to Dr. Nicholas Chrisman, Geoide Network and Centre for Research in Geomatics and to Mr. Pierre Grenier, Pôle Québec Chaudière- Appalache for the excellent reception at the Université Laval on Monday, and their warm words of welcome and greetings to the delegates. ISO/TC 211 finally expresses their appreciation to the organizing committee for arranging the excellent dinner and entertainment on Thursday, and to Mrs. Louise Ouellet, sousministre associée à Foncier Québec, Ministère des ressources naturelles et de la Faune, Gouvernement du Québec and Mr. Éric Loubier, Natural Resources Canada for their addresses to the committee. Acclamation 6