Pressure Balancing Thermostatic Mixing Valves Pressure Balancing Thermostatic Mixing Valves (PBTMVs) are designed to deliver a safe, even and constant preset temperature from the incoming hot and cold water. PBTMVs are unique because they combine a built-in pressure balancing piston with thermostatic temperature balancing in the one patented control cartridge to deliver constant temperature of +/- 1 C no matter what happens in the pipework. FEATURES World patented control cartridge (common to all PBTMVs), provides both thermostatic temperature control and pressure balancing control in one simple cartridge design. Multi and single outlet installations. Complete with built-in line strainers/non return valves on both hot and cold inlets. No pressure limiting valves required. Temperature knob supplied with Safety feature to prevent scalding (mechanism can be manually overridden by an adult). Valves factory pre-set to 38 C (can be re-calibrated Maximum Dynamic Ratio 13:1. Operates from Min 50kPa to Max 1000kPa. Recommended working pressure 100kPa Valves made in Sweden. Available in Pre-plumbed Australian made stainless steel boxes for concealed or exposed installation. CARTRIDGE PRE-PLUMBED OPTIONS
Pressure Balancing Thermostatic Mixing Valves UNDERSTANDING THE UNIQUE OF FM MATTSSON VALVES Generic - Thermostatic Mixing Valves Generic TMVs rely only on the thermostat element to control the mixed hot and cold water. These can be adjusted to a selected temperature and are suitable for direct contact with skin. Because generic TMVs use only a wax element, they can be slow at reacting to pressure changes or natural fluctuations in the water supply, so the mixed water temperature may spike and cause discomfort to end users. In the event of a cold water failure, the warm water of a generic TMV may spike to dangerous temperatures before the wax element has time to activate and cut off the hot water supply. This can be fatal for frail/elderly people and babies. The Best - Thermostatic Mixing Valves TMVs rely on both a wax thermostatic element and a built in pressure balancing piston to ensure a safe and constant mixed warm water temperature. The built in pressure balancing system ensures that the warm water stays within +/- 1 C of set temperature. Where water supply pressures are unequal (13:1 ratio) or there is natural fluctuations in the piping system, the built in pressure balancing system will balance the incoming pressures and control the temperature at a safe and stable level. In the event of a cold water failure, the built in balancing system combined with the thermostatic element, cuts off the hot water supply safely and quickly - within a second. The built in balancing system function provides additional THE BEST - THERMOSTATIC MIXING VALVES PBTMV Cartridge Cold water inlet Pressure Balancing Piston Sensor Element Hot water inlet Regulating Shuttle Thermostat PBTMV Cartridge Exploded View Regulating Shuttle containing the Pressure Balancing Piston Return Spring Mixing Chamber Hot water outlet to mixing Chamber Cold water outlet to mixing Chamber The internal pressure balancing piston balances, at the respective inlets and outlets of the regulating shuttle, the amount of incoming hot and cold water that is able to enter the mixing chamber. Simultaneously the thermostatic sensor element both monitors and adjusts the regulating shuttle s position to cover the hot water outlet to the mixing chamber, preventing scalding.
Pressure Balancing Thermostatic Mixing Valves Thermal Flush for legionella control simply remove the Red Lockshield cap, wind out the valve completely to flush through the desired / maximum degree of hot water. Only valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Safe temperature, safe touch and comfortable showers - no temperature spikes. Accurate, constant water temperature and pressure within +/- 1 C no matter what happens in the pipework thanks to the unique Pressure Balancing Piston. Built-in Pressure Balancing Piston function also provides additional Simple cartridge design easy to maintain, reduced maintenance costs over the lifetime of the installation. Widest range of PBTMV solutions for all commercial, domestic, multi and single outlet applications. Exceptional safety, performance and superior quality to all other brands. Multi and single outlet installations. Complete with built-in line strainers/non return valves on both hot and cold inlets. No pressure limiting valves required. Valves will changeover from older brands (Grohe, Hansa, Rada, Aquablend, Horne). CARTRIDGE PRE-PLUMBED OPTIONS
9219 Pressure Balanced Thermostatic Bath or Shower Mixer With Adjustable Temperature (without flow control) 9219 PBT Bath or Shower Mixer with adjustable temperature (without flow control) unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for domestic bath or shower installations, hair dressing salons, food processing, hydrotherapy facilities, disabled and special care facilities, and other installations requiring a constant temperature. Adjustable temperature control to deliver constant temperature within +/- 1 C. Pressure (kpa) Flow (l/min) 100 17 200 24 30 400 34.5 500 39 600 42.5 SPECIFICATIONS / INSTALLATION Supplied with brackets for concealed installation. Comes with dual G1/2 inlets and outlets. Wall plate 130mm diameter. Unit must have flow control devices fitted between it and each outlet. Safety lock feature prevents unintentional temperature changes. Simple cartridge design - easy to maintain. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 9219-7070
9220 Concealed Pressure Balanced Thermostatic Bath or Shower Mixer (Flow Control and Adjustable Temperature) 9220 Concealed PBT Bath/Shower Mixer unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for bath or shower installations. Comes with flow control and adjustable temperature control to deliver perfectly constant temperature within +/- 1 C. Pressure (kpa) Flow (l/min) 100 16.5 200 23.5 29 400 33 500 37 600 40.5 SPECIFICATIONS / INSTALLATION Fits into 62mm-78mm stud wall. Comes with G3/4 (20mm) inlets and outlets. Safety lock feature prevents unintentional temperature changes. Simple cartridge design - easy to maintain. Comes with check valves and line strainers. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 9220-7070
9210 Pressure Balanced Thermostatic Shower Mixer 9210 Pressure Balanced Thermostatic Shower Mixer unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for domestic bathrooms, hair dressing salons, food processing, hydrotherapy facilities and other installations where a constant temperature is required. Exposed shower mixer comes with flow control and adjustable temperature control to deliver perfectly constant temperature within +/- 1 C. Pressure (kpa) Flow (l/min) 100 14 200 20 24 400 27 500 31 600 34 SPECIFICATIONS / INSTALLATION Shower mixer comes with 15mm BSP hand shower connection. Valve fitted with 20mm BSP connection nuts and requires pipework to be set at 150-153 c/c. Safety lock feature prevents unintentional temperature changes. Comes with check valves and line strainers. Simple cartridge design - easy to maintain. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 9210-7070
9250 Pressure Balanced Thermostatic Shower Mixer 9250 Pressure Balanced Thermostatic Shower Mixer unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for hospitals, nursing homes, child care centres, hydrotherapy facilities, hair dressing salons and other installations requiring a constant temperature. Exposed shower mixer comes with flow control and temperature control to deliver perfectly constant temperature within +/- 1 C. Pressure (kpa) Flow (l/min) 100 14 200 20 24 400 27 500 31 600 34 SPECIFICATIONS / INSTALLATION Mixing valve is fixed to the wall by a removable wall adapter. External fitting. 15mm BSP inlets and outlets provided. Ideal for retro fitting. Safety lock feature prevents unintentional temperature changes. Comes with check valves and line strainers. Simple cartridge design - easy to maintain. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 9250-7070
9680 Pressure Balanced Thermostatic Shower Mixer Garda Range 9680 Pressure Balanced Thermostatic Shower Mixer - Garda Range Pressure (kpa) 295 150 G3/4 G1/2 14 Flow (l/min) 100 14 200 20 24 400 27 500 31 600 34 unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for domestic bathrooms, hair dressing salons, food processing, hydrotherapy facilities, disabled and special care facilities, and other installations where a constant temperature is required. Exposed shower mixer comes with flow control and temperature control to deliver perfectly constant temperature within +/- 1 C. SPECIFICATIONS / INSTALLATION Shower mixer comes with 15mm BSP hand shower connection. Valve fitted with 20mm BSP connection nuts and requires pipework to be set at 150-153 c/c. Safety lock feature prevents unintentional temperature changes. Comes with check valves and line strainers. Simple cartridge design - easy to maintain. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 9680-7070
9690 Pressure Balanced Thermostatic Shower Mixer with diverter Garda Range unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. 9690 Pressure Balanced Thermostatic Shower Mixer with diverter - Garda Range G1/2 Pressure (kpa) G3/4 295 150 14 93 Flow (l/min) 100 14 200 20 24 400 27 500 31 600 34 Suitable for domestic bathrooms, hair dressing salons, food processing, hydrotherapy facilities, disabled and special care facilities, and other installations where a constant temperature is required. Exposed shower mixer with diverter/ swivel spout. Comes with flow control and temperature control to deliver perfectly constant temperature within +/- 1 C. SPECIFICATIONS / INSTALLATION Shower mixer comes with 15mm BSP hand shower connection. Valve fitted with 20mm BSP connection nuts and requires pipework to be set at 150-153 c/c. Safety lock feature prevents unintentional temperature changes. Comes with check valves and line strainers. Simple cartridge design - easy to maintain. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 9690-7070
5190-8070 Pressure Balanced Thermostatic Bath or Shower Mixer With Fixed Temperature Knob (without flow control) 5190-8070 PBT Bath or Shower Mixer with Fixed Temperature Knob (without flow control) unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Pressure Balancing Piston ensures accurate constant temperature within +/- 1 C no matter what happens in the pipework. Built-in Pressure Balancing Piston function also provides additional Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for hospitals, nursing homes, child care centres, disabled and special care facilities, hydrotherapy facilities, hotels, hair dressing salons and other installations where a constant temperature is required. Adjustable temperature control to deliver constant temperature within +/- 1 C. Pressure (kpa) Flow (l/min) 100 17 200 24 30 400 34.5 500 39 600 42.5 SPECIFICATIONS / INSTALLATION Supplied with brackets for concealed installation. Comes with dual G1/2 inlets and outlets. Wall plate 130mm diameter. Unit must have flow control devices fitted between it and each outlet. Fixed temperature knob to prevent unauthorised interference. Simple cartridge design - easy to maintain. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Made in Sweden. COLOURS Chrome. PRODUCT CODE 5190-8070
9230-8070 Pressure Balanced Thermostatic Mixing Valve Product 9230-8070 PBTMV concealed raw 9230-8070 PB Thermostatic Mixing Valve Pressure (kpa) Product 9230-8071 PBTMV complete with isolating valves Thermal Flush for legionella control simply remove the Red Lockshield cap, wind out the valve completely to flush through the desired / maximum degree of hot water. Flow (l/min) 100 15.5 200 22.5 28 400 32.5 500 36.5 600 40.3 unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Accurate, constant water temperature within +/- 1 no matter what happens in the pipework thanks to the unique Pressure Balancing Piston. Built-in Pressure Balancing Piston function also provides additional No pressure limiting valves required. Thermostatic temperature control and pressure balancing control all in one simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Suitable for hospitals, nursing homes and child care centres. Preset tempered water to single or multi point installations without the risk of unauthorised persons altering the preset temperature or flow. SPECIFICATIONS / INSTALLATION Valve is fitted with 15mm BSP inlet nipple. Inbuilt non return valves and filters. Fixed temperature knob to prevent unauthorised interference. Fail safe system prevents scalding in the event of cold water supply failure. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Pressure Balancing valve made in Sweden. Available in Pre-plumbed boxes, fully Australian made. COLOURS Safety Valve - Raw brass Fixed Temperature Knob Red PRODUCT CODE 9230-8070
9230 Pre-plumbed Pressure Balanced Thermostatic Mixing Valve # ( x x 75mm Stainless Steel Box) Suitable for hospitals, nursing homes, child care centres and public areas. Designed to deliver tempered water to single or multi-point installations without the risk of unauthorised persons altering preset temperature. INSTALLATION 9230 valve pre-plumbed with 20mm isolating ball valves and pipework and supplied in high quality stainless steel box ( x x 75mm) for concealed (recessed) and exposed (wall mounted) installation. 9230 Pre-plumbed PBT Mixing Valve 40 52 52 115 Uses 9230 PB Thermostatic Mixer (with fixed temperature knob). The box has been purposely designed with pilot holes for easy fixing to stud work and 150mm extended pipes for joining to existing pipework. Branch in cold water inlet pipe with 20mm ball valve for continuous supply of cold water whilst mixer is being serviced. Lockable lid is keyed alike. Recommended working pressure 100kPa Valves made in Sweden. Pre-plumbed stainless steel boxes for concealed or exposed installation are Australian made. Pressure (kpa) Flow (l/min) 100 15.5 200 22.5 28 400 32.5 500 36.5 600 40.3 COLOURS Box - Stainless steel Valve - Raw brass Temperature knob - Red See Next Pages for plumbing configurations and Product Codes in our stainless steel boxes. # Bath/Shower/Basin/Multi-Point Application
MAG Pre-Plumbed Standard Box, Stainless Steel With Flat Panel Door Stainless Steel Box Size: mm X mm X 75mm Panel Door on Recessed Box: 330mm X 330mm X 1.5mm 4 pipes has Cold Water Bypass Front Panel Back Panel 4 Pipes Two Ways - with Cold Water Bypass 90 170 4 Pipes One Way - with Cold Water Bypass 40 52 52 115 40 70 9230-0002 Concealed (recessed) box 9230-0004 Exposed (wall mounted) box 9230-0001 Concealed (recessed) box 9230-0003 Exposed (wall mounted) box 3 Pipes Two Ways 90 170 40 52 170 3 Pipes One Way 110 9230-0006 Concealed (recessed) box 9230-0008 Exposed (wall mounted) box 9230-0005 Concealed (recessed) box 9230-0007 Exposed (wall mounted) box
9230 Thermostatic Mixing Valve Assembly Breakdown 4 Pipes One Way i i i i h f e g b b d c a COMPONENT WATERMARK LICENCE NO. a b c d e f g h i Lic 1186 Lic 02072 Lic 2387 Lic 2387 Lic 2387 Lic 2387 Lic 2387 Lic 21813 Lic 25726 TMV x 1 Chrome Ball Valve x 2 M/F Brass Extension x 1 Elbow x 1 Tee Piece x 1 Male Union x 1 M/M Elbow x 1 Ball Valve x 1 Copper Pipe x 4
MAG MATTSSON Pre-Plumbed Configurations (continued) MAG MATTSSON MARK II OPTIONAL BOX (MADE TO ORDER) Mattsson Mark II Box with Door and Frame type finish (DF) Box Size mm x mm x 75mm - Door and Frame on recessed box is 355mm x 355mm x 1.5mm 9230-DF01-4 pipes one way with Cold Water Bypass (concealed/recessed) box 9230-DF02-4 pipes two way with Cold Water Bypass (concealed/recessed) box 9230-DF03-4 pipes one way with Cold Water Bypass (exposed/wall mounted) box 9230-DF04-4 pipes two way with Cold Water Bypass (exposed/wall mounted) box 9230-DF05-3 pipes one way (concealed/recessed) box 9230-DF06-3 pipes two way (concealed/recessed) box 9230-DF07-3 pipes one way (exposed/wall mounted) box 9230-DF08-3 pipes two way (exposed/wall mounted) box TMV Box Only MAG-01 - Stainless Steel TMV box only, with flat panel door Box size - mm x mm x 75mm - Panel door recessed box 335mm x 335mm x 1.5mm MAG-02 - Stainless Steel box only, with door and frame Box size - mm x mm x 75mm - Door and frame on recessed box 335mm x 335mm x 1.5mm COLD WATER INLET COLD WATER BYPASS WARM WATER SUPPLY TO FIXTURES. OUTLET TEMPERATURE SHALL BE SET TO 43.5 C. WARM WATER OUTLET HOT WATER INLET COLD WATER BY-PASS ISOLATION VALVE TEMPERATURE TEST POINT 150 MAG BOX, FM MATTSSON MODEL 9230, WITH IN BUILT BALANCING SYSTEM, THERMOSTATIC MIXING VALVE COMPLETE WITH ISOLATING VALVES, STRAINERS CHECK VALVES AND MAIN ISOLATION VALVE COMPLETE WITH FLAT PANEL KEY LOCK. HOT WATER ISOLATION VALVE NOTE: ISOLATING VALVES AND ACCESS PANELS ASSOCIATED WITH THERMOSTATIC VALVES ARE SUPPLIED BY THE THERMOSTATIC MIXING VALVE SUPPLIER AS ONE PACKAGE. DEPTH: 75mm MAG MATTSSON Pressure Balanced Thermostatic Mixing Valve 4 Pipes One Way with Cold Water Bypass THERMOSTATIC MIXING VALVE COMPLETE WITH ISOLATING VALVES, STRAINERS AND CHECK VALVES
MAG MATTSSON Pre-Plumbed Configurations (continued) SPECIAL PLUMBING CONFIGURATIONS (SPCS) SPCs are plumbed into various size boxes, please ensure the box size meets your requirements. All boxes are fitted with flat panel door 30mm larger than box size. 9230-0012 - 7 pipe system two way includes cold and hot water bypass (recessed box) 9230-0012W - 7 pipe system two way includes cold and hot water bypass (wall mounted box) Box size - 350mm x mm x 75mm with flat panel door 9230-ECCl - 4 pipe system one way includes electronic component compartment (recessed box) 9230-ECCl W - 4 pipe system one way includes electronic component compartment (wall mounted box) Box size - 450mm x 350mm x 75mm with flat panel door 9230-0014 - 6 pipe system one way includes cold water bypass and rainwater connection (recessed box) 9230-0014W - 6 pipe system one way includes cold water bypass and rainwater connection (wall mounted box) Box size - 400mm x mm x75mm with flat panel door 9230-0013 - 5 pipe system one way includes cold and hot water bypass (recessed box) 9230-0013W - 5 pipe system one way includes cold and hot water bypass (wall mounted box) Box size - 350mm x mm x 75mm with flat panel door 9230-0015 - 7 pipe system one way includes cold and hot water bypass and rainwater connection (recessed box) 9230-0015W - 7 pipe system one way includes cold and hot water bypass and rainwater connection (wall mounted box) Box size - 400mm x mm x 75mm with flat panel door
5193 Pressure Balanced Thermostatic Low Flow-High Flow ¾ Mixing Valve With Fixed Temperature Knob 5193 Pressure Balanced TMV Low Flow-High Flow ¾ - Fixed Temperature Knob unique valve technology is the ONLY valve on the market that can cope with sudden pressure peaks and fluctuating temperatures. Maximum flow rate of 97.5L per minute. Accurate, constant water temperature within +/- 1 degree no matter what happens in the pipework thanks to the unique Pressure Balancing Piston. Built-in Pressure Balancing Piston function also provides additional Thermal Flush for legionella control simply remove the Red Lockshield cap, wind out the valve completely to flush through the desired / maximum degree of hot water. No pressure limiting valves required. With three regulation cartridges to cater for high flow rates. Each of the three cartridges have thermostatic temperature control and pressure balancing control in the simple cartridge design. Exceptional safety, performance and superior quality to all other brands. Maintains constant temperature and pressure in all low flow and high flow situations. Suitable for hospitals, nursing homes, child care centres, gyms, swimming centres, shower blocks, health centres and multi point outlets. Preset tempered water to multi point installations without the risk of unauthorised persons altering the preset temperature or flow.
5193 Pressure Balanced Thermostatic Low Flow-High Flow ¾ Mixing Valve With Fixed Temperature Knob Flow Diagram Pressure (kpa) 15mm Outlet Flow (l/min) 20mm Outlet Flow 100 17 36 200 24 29.5 75 400 34 500 38 97.5 600 41.5 SPECIFICATIONS / INSTALLATION Pre-plumbed with 25mm pipework in and out. Supplied with one 20mm outlet and one 15mm outlet. Unit must have flow control devices fitted between it and each outlet. Fixed lockshield temperature knob to prevent unauthorised interference. Comes with check valves and line strainers built into the isolating valves supplied with the valve. Fail safe system prevents scalding in the event of cold water supply failure. Factory pre-set to 38 C (can be recalibrated Recommended working pressure 100kPa Raw brass. Made in Sweden. PRODUCT CODE 5193-8070