Annex 2 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 1 of 2 DEPARTMENT of TEXTILES PHYSICAL-CHEMICAL TESTING Notified body No.1401 of Textile Institute of State scientific research institute Center for Physical Sciences and Technology SCOPE OF ACCREDITATION EC Directive, legislation on which EC Directive is based Title of goods (group of goods) Conformity assessment procedures, module, annexes, schemes and other Harmonised standards, where applied 4 European Council Directive 89/686/EEC, Technical regulation Personal Protective Equipment, approved on 3 July, 2000 by Order No. 69 of the Minister of Social Security and Labour of the Republic of Lithuania by which Council Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment, as well as the directives substituting this directives 93/68/EEC, 93/95/EEC and 96/58/EC have been implemented High-visibility clothing EC type examination LST EN ISO 20471:2013 Protective clothing for use in welding and allied processes Clothing to protect against heat and flame EC type examination LST EN ISO 11611:2008 EC type examination LST EN ISO 11612:2009
Annex 2 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 2 of 2 4 European Council Directive 89/686/EEC, Technical regulation Personal Protective Equipment, approved on 3 July, 2000 by Order No. 69 of the Minister of Social Security and Labour of the Republic of Lithuania by which Council Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment, as well as the directives substituting this directives 93/68/EEC, 93/95/EEC and 96/58/EC have been implemented Electrostatic dissipative protective clothing Clothing to protect against rain EC type examination LST EN 1149-5: 2008 EC type examination LST EN 343+A1:2007 LST EN 343+A1:2007/AC:2010 Director of Lithuanian National Accreditation Bureau Jurgis Šarmavičius
Name of tested sample Annex 1 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 1 of 4 DEPARTMENT of TEXTILES PHYSICAL-CHEMICAL TESTING of Textile Institute of State scientific research institute Center for Physical Sciences and Technology Name of tested characteristics SCOPE OF ACCREDITATION (Flexible)* Reference number and name of normative document, that determines the methods of testing LST EN ISO 1833-1: 2011, Annex B (mechanical separation) fibre mixtures. Method of quantitative analysis by manual separation. LST EN ISO 1833-4: 2011 Fibres, yarns, woven, knitted, non-woven Fibre content (binary component mixture) fibre mixtures, 2 nd method LST EN ISO 1833-7: 2011 fibre mixtures, 4 th method * Defined and applicable for all accreditation scope the following degree of flexibility: application of the up-dated versions of the documents defining the accredited test methods or of the documents superseding them.
Annex 1 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 2 of 4 Fibre content (binary component mixture) LST EN ISO 1833-11: 2011 fibre mixtures, 7 th method LST EN ISO 1833-12: 2011 fibre mixtures, 8 th method Fibres, yarns, woven, knitted, non-woven Fibre content (ternary component mixture) September 2011. Annex VIII, Chapter 3, with Commission Delegated Regulation (EU) No. 286/2012 of 27 January 2012. Quantitative analysis of ternary textile fibre mixtures (methods of chemical analysis for typical mixtures No.: 2, 4, 6, 7, 9, 13, 15, 18, 19, 20, 21, 33) ph of the aqueous extract LST EN ISO 3071: 2006, extracting solution-water Formaldehyde LST EN ISO 14184 1: 2011 Colour fastness to dry cleaning LST EN ISO 105 D01: 2010 Colour fastness to water LST EN ISO 105 E01: 2013 Colour fastness to perspiration LST EN ISO 105 E04: 2013
Annex 1 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 3 of 4 Fibres, yarns, woven, knitted, non-woven non-woven Fluorescent material for highvisibility warning clothing non-woven, clothes and other textile garments non-woven Woven, stretch woven, knitted Rubber or plastics coated Colour fastness to rubbing LST EN ISO 105 X12: 2004, except 4.1.1 p. Colour fastness to laundering Colour fastness to artificial light Xenon test CIE chromaticity coordinates x, y, CIE tristimulus value Y and colour difference ΔE* ab, ΔE 00 Colour difference ΔE* ab and ΔE CMC LST EN ISO 105 C06: 2010, except tests from table 2 No. D3S, D3M, E1S and E2S LST EN ISO 105 B02: 2013 LST EN ISO 105-J01: 2000 LST EN ISO 105-J03: 2010 CIE chromaticity coordinates x, y CIE 15:2004 (LST EN ISO 105-J01: 2000) Luminance factor β Dimensional change in washing and drying LST EN ISO 5077: 2008 Domestic washing and drying precedures Mass per unit area Maximum force and elongation at maximum force Maximum force, elongation at maximum force and breaking elongation LST EN ISO 6330: 2012, except drying procedure with flat press (E) and washing procedures M LST EN 12127: 1999 LST ISO 3801: 1998, 5 method LST EN ISO 13934 1: 2013 LST EN ISO 1421:2003 Rubber or plastics coated Tear force LST EN ISO 4674-1: 2005
Annex 1 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 4 of 4 Woven, non-woven Woven textile and produced by other techniques non-woven Flat made-up textiles (woven, knitted, nonwoven ) non-woven, clothes and other textile garments Tear force LST EN ISO 13937-2: 2001 Maximum force to seam rupture LST EN ISO 13935-2:2002, except 5 p. Abrasion resistance LST EN ISO 12947-2:2001 Resistance to water penetration Permeability to air LST EN ISO 9237: 1997 Textile Thermal resistance LST EN 31092: 2002 Textile and textile compositions Textile and textile compositions Textile for apparel, except materials which are labeled as dry clean only Characteristics of limited flame spread LST EN 20811:1997, only when water column is over 1 m LST EN ISO 15025: 2006 Flame spread behaviors LST EN ISO 6941: 2004 Burning behaviors (surface ignition) LST EN 1103: 2006 Textile Surface resistivity LST EN 1149-1:2006 Textile Half decay time and shielding factor LST EN 1149-3:2006, 2 nd method Director of Lithuanian National Accreditation Bureau Jurgis Šarmavičius