Date- 02.11.2012 Amendment-2 Work - Tender for SITC of HT/LT substation equipments installation and allied electrical works for lecture theatre complex, FCI campus, University of Allahabad, Allahabad. Tender no.:- RITES/CO/B&A/EED/ALD- Uni/Substation/E-3 Sr. no. Item/clause/Page no. Description as per tender. To be read as 1 BOQ.Item. No.25, outgoings Busbar no.-1 and busbar no-4, pg. 022 and 23 Main LT panel Type of protection releases for 630 Amp. TPN MCCBs (outgoing) on bus bar-1 & bus bar-4 side. Required with microprocessor based release with O/L, S/C and E/F Protection. 2. Technical Specification Cl.no.-4.6.7.2 pg.no.-109 GI earth bus bars of 50 mmx6 mm two runs shall be provided for the LT panel for full length of the panel and connected to the frame work. Provisions shall be made for connections from this earth bar to the main earthing bar on both sides of L.T. Panel. Follow standard and acceptable norms as per CPWD specifications Transformers 3 BOQ. Item no.43, pg. 52 Tap changer range +10 % to - 10 % or +5% to -15 %. Tap changer range +5% to -15 %. 4 Technical specification, Clause II( 15), pg. no. 101 The transformer construction & galvanizing of various parts. It should be as per relevant Indian Standards. HT Panel 5 BOQ item no. 25 (II), Synchronising panel Pg. 23,24,25 and 26 Auto as well as manual synchronising with load sharing, AMF logic, load management, protection and interlocking, load balancing complete for following input conditions ( PLC CONTROL PANEL)--------- Auto as well as manual synchronising and load sharing panel, AMF logic, load management, protection and interlocking, load balancing complete for following input conditions (MODULAR CONTROLLER PANEL)---------Details as per annexure A ( 04 pages)
Amendment no. 2 (Annexure "A") Dated 02.11.2012 Work - Tender for SITC of HT/LT substation equipments installation and allied electrical works for lecture theatre complex, FCI campus, University of Allahabad, Allahabad. Tender no.:- RITES/CO/B&A/EED/ALD- Uni/Substation/E-3 SCHEDULE OF QUANTITY ITEM RATE TENDER S. NO. DESCRIPTION OF ITEMS UNIT QTY QUOTED RATE Rate (Rs.) Amount (Rs.) In Figures (Rs.) In Words (Rs) IN FIGURES (Rs) (C) 25 (II) MAIN DISTRIBUTION BOARDS AUTO / MANUAL SYNCHRONIZING & LOAD SHARING PANEL WITH AMF LOGIC, LOAD MANAGEMENT, PROTECTION AND INTERLOCKING, LOAD BALANCING COMPLETE FOR FOLLOWING INPUT CONDITIONS: (MODULAR CONTROLLER PANEL): DG SETS: MAINS: 2 Nos, 1250 KVA TRANSFORMER (SYNCHRONIZING BETWEEN DG SETS ONLY NOT WITH GRID SUPPLY)
i MAJOR CONTROL EQUIPMENTS: a. DG SYNCHRONIZING & CONTROL MODULE " DEIF-242" with DEIF Module - IOM-220 DEIF Module: 4 SETS b. TRANSFORMER FEEDER PLC CONTROLLER MODULE with AMF Sensing & protection of transformer feeder -DEIF Make AGC-245-2 Sets c. Master Trip Relay d. All required necessary relays, Conactors, Contact Blocks with interconnections / wiring to make the panel fully functional & operative a per AMF, synchronizing,load sharing & management complete in all respect in a panel form accomodating all equipments and accessories etc in 2mm thick CRCA sheet steel enclosure. ii Miscellaneous: a. The panel shall be complete in all respect to identify signals, compare, activate command as per requirements fed in data sheet to for AMF, Auto Synchronizing, Master & slave selection, Auto Load sharing & management and shall include all necessary & essential accessories / equipments, required power and signal cabling between Synchrinizing Panel, DG Sets and LT Panels, the cost of required software, essential equipments / tools / instruments required during operation. iii INDICATIONS: 4 Nos, 12 windows anunciation panel for required Indications other than in DEIF Control Module.
4 Nos Set -ON 4 Nos Load on DG Set 2 Nos Load on Mains Supply 1 No DC Control Supply Healthy 1 No, Industrial Type Hooter 24V DC 1 No MIMIC with LED lights for visual display Any other indication required as per standard practice. iv GENERAL ACCESSORIES: All essential accessories & components required to make the panel perfect and operational but not limited to following: Operating Push Buttons Audio Alarms for faults / failure Solo/Parallel sel. Switches Control Relays & Auxilary Contactors Contact Blocks. 1 No for each DG Sets (4 Nos), 24V, 10A DC stabilized Power Supply with Battery Charger 230V AC, 0-15A, Trickle & Boost static Charger for 24V, DG Starting battries. DC 0-30V Voltmeter shall be provided. Required Power Supply & UPS Unit for Contorls Required MCBs / MCCBs Any other accessories / components essentally required to make system perfect in order. v PROTECTIONS:
All essential protections to be included with required relays, sensors, activating switches, including indications on panel for engine, alternator and Panels. Some are indicated below :for each DG Set: a. Engine overheat b. High water Temperature. c. Low lube oil pressure. d. Over Speed. e. Low Fuel oil level. f. Cooling water Flow failure. g. DC control supply failure. h. Reverse Power i. Phase Reversal j. Any other important & essential as per standard practice vi SEQUENCE OF OPERATION: a For Autostart, Auto Syncronizing, Auto Load Sharing, Load Management : DG-1 / 2 / 3 / 4 : Sequence shall be programmed as per load conditions being utilised by the user so that the system works efficiently and smoothly as desired. vii GENERAL: a. Neutral contactor of all the DG sets shall be controlled through PLC such that only one contactor is on at a time in sync mode. In manual mode the neutral contactors shall also be interlocked.
b. The cost of panel shall include all communication & power cables between the Mains Panel / Synchronizing panel / DG Sets, communication card, grafix software package, door operated lights, space heaters with thermostats, 150mm exhaust fans with air filter and other item required to complete the system shall be part of the quoted rate. c. All wiring shall be included to wire to the breakers provided in LT panels (Mains) / LT Panel (Emergency) / DG Sets / Synchronizing Panel complete for fool proof and flaw less operation. AMF, AUTO SYNCHRONIZING, LOAD SHARING & MANAGEMENT PANEL AS ABOVE No 1