WIFFEN PRODUCTS BoilingBilly the new generation in Boiling water technology WIFFEN PRODUCTS 01
CONTENTS CONTENTS PAGE 2 ECONOMY SERIES PAGE 3 STANDARD/SUPREME SERIES PAGE 4 STANDARD/SUPREME SERIES SPECIFICATIONS PAGE 5 MINI BOIL N CHILL PAGE 6 THE ORIGINAL UNDERSINK WATER CHILLER PAGE 7 BOILING BILLY - GREEN T PAGE 8 GREEN T BOIL N CHILL UNIT MODELS PAGE 9 ULTIMIX BOIL N CHILL UNIT PAGE 10 COMBINED BOILING & CHILLED FILTERED MODELS PAGE 11 THE ORIGINAL UNDERSINK BOILING BILLY PAGE 12 DUAL MATE PAGE 13 AUSTRALIAN AGENTS PAGE 14 WARRANTY 02 WIFFEN PRODUCTS BoilingBilly
ECONOMY ECONOMYSERIES WALL MOUNTED WITH A REMOVABLE FRONT COVER AND IS SIMPLE TO SERVICE IF REQUIRED Wall mounted. White coloured case. 2.5-7.5 litre. JR SERIES 2.5-5 LITRE 310 200 90 HEIGHT 30 165 DIMNESIONS IN mm 23 O/FLOW 35 INLET APPROX 300mm BENCH TOP JR SERIES 7.5 LITRE 385 285 80 435 HEIGHT 30 180 DIMNESIONS IN mm 25 O/FLOW 35 INLET APPROX 300mm BENCH TOP SPECIFICATIONS Model Capacity Cups/ Hr Rating No. of Cups No. Litres Recovery Kw 1 CUP (200ML CUPS) Height Width Depth JR2.5 2.5 14 110 2.4 400 310 165 JR5 5 25 110 2.4 400 310 165 JR7.5 7.5 38 110 2.4 460 310 165 Specifications are subject to change without notice. BoilingBilly WIFFEN PRODUCTS 03
SUPREME SUPREMESERIES SERIES 2.5-10 LITRE Removable front cover. Internal pressure limiting valve. Computerised element. STANDARD STANDARDSERIES SERIES 2.5-60 LITRE Removable front cover. Computerised element. Colourbond white cover. Stainless steel cover (optional) Larger units upon request 04 WIFFEN PRODUCTS BoilingBilly
BOILING BOILINGBILLY BILLY SUPREME SERIES 2.5-10 LITRE 390 200 20 FULL SERVICE NETWORK 7 year warranty on storage tank when fitted with a filter. One year - tap, ball valve and element. No costly parts. Simple to service if required. OPTIONAL EXTRAS Swivel taps, Twin taps, Water filters, 3.0, 4.8, 6 & 9kw rating. Units can be manufactured to suit your needs. Electric 135 100 32 190 30 INLET 35 APPROX DIMNESIONS IN mm O/FLOW 300MM BENCHTOP STANDARD SERIES 2.5-10 LITRE Electric 20 135 100 32 180 30 35 DIMNESIONS IN mm O/FLOW BENCHTOP STANDARD SERIES 15-60 LITRE 20 50 50 390 200 INLET APPROX 300MM 600 450 HEIGHT HEIGHT HOW TO SPECIFY: Determining how many cups of boiling water required at one time, then specify the corresponding model. If you require larger element, place kw rating after the model number, for stainless steel case place SS. Electric 140 100 25 250 DIMNESIONS IN mm BENCHTOP 200 mm 50 30 INLET 40 APPROX O/FLOW 300MM HEIGHT 50 mm 300 mm Cut out for concealed plumbing SPECIFICATIONS Model Capacity No. Of Cup/ Hr Rating Height Width No. Cups Recovery Kw mm mm Boiling Billy SBB 2.5 2.5 14 110 2.4 460 390 Supreme Series SBB 5 5 25 110 2.4 460 390 SBB 7.5 7.5 38 110 2.4 550 390 SBB 10 10 50 110 2.4 550 390 ONE CUP (200ML) Depth mm 190 190 190 190 JE 2.5 2.5 14 110 2.4 365 390 JE 5 5 25 110 2.4 455 390 JE 7.5 7.5 38 110 2.4 550 390 Boiling Billy JE 10 10 50 110 2.4 550 390 Standard Series JE 15 15 75 110/160 2.4/3.0 535 600 White, JE 20 20 100 110/160 2.4/3.0 535 600 Colourbond or JE 25 25 125 110/160 2.4/3.0 635 600 Stainless steel JE 30 30 150 110/160 2.4/3.0 635 600 cases. JE 40 40 200 110/160 2.4/3.0 775 600 JE 50 50 250 110/160 2.4/3.0 775 600 JE 60 60 300 110/160 2.4/3.0 840 600 180 180 180 180 250 250 250 250 250 250 250 Specifications are subject to change without notice. Larger units available upon request. BoilingBilly WIFFEN PRODUCTS 05
MINI MINIBOIL N CHILL CHILL TWO SYSTEMS IN ONE Energy Efficient. Environmentally friendly - CFC free. New advanced design technology maintains temperature of both boiling and chilled water. Internal filter and pressure limiting valve. Simple filter changes. Wall mounted. MINI BOIL N CHILL 2.5 LITRE 495 395 150 20 Electric 120 32 295 50 INLET 70 DIMNESIONS IN mm O/FLOW APPROX 300MM BENCHTOP 50 255 590 MINI BOIL N CHILL 5-10 LITRE 600 500 150 20 Electric 120 32 330 50 INLET 70 DIMNESIONS IN mm O/FLOW APPROX 300MM BENCHTOP 50 255 690 SPECIFICATIONS ELECTRICAL APPROVAL NO. Q01754 Model MBC15/30 Litres 2.5 Rating (KW) 1.8 Recovery Cups/ Min 2 Boiling Water Delivery Cups 15 Chilled Water Delivery Cups 30 Dimensions (mm) H W D 590 495 295 MBC30/60 5 1.8 2 30 60 690 600 330 MBC60/100 10 1.8 2 60 100 690 600 330 Single Phase - 240v 50HZ - requires 10 Amp GPO Flex and plugs supplied Optional - cyst guard ration (extra) Compu terised element with boil dry protection Full Australian Service Network Full 12 months parts and labour warranty Electrically Approved Chilled Water Temperature (adjustable) Power on Indicator Specifications are subject to change without notice. 06 WIFFEN PRODUCTS BoilingBilly
THE ORIGINAL THE ORIGINAL UNDERSINK WATER UNDERSINK CHILLERWATER CHILLER COMPLETE INSTALLATION KIT Carafe Tap Filter System. 3 Pin Power cable. Plastic Tubing and Brass Fittings. Compressor hermetically sealed auto overload Refrigeration R-143a gas charge Thermostat (factory set) Capacity 1/6hp (MC1014) (1/12hp MC07) Stainless Steel 3.6 litre Tank (MC1014) (S/Steel 1.8 litre Tank MC07) Powder Coated case Maximum Pressure 800kpa / minimum pressure 100kpa Model 301 SPECIFICATIONS MODEL NO. HEIGHT MM DEPTH MM WIDTH MM WEIGHT KG VOLTS MC07 280 405 205 13 240 50HZ MC1014 250 500 180 17 240 50HZ Optional Extra: Stainless Steel Case 12 months warranty on all parts Specifications are subject to change without notice. BoilingBilly WIFFEN PRODUCTS 07
BOILING BILLY - GREEN T It s finally here! A boiling water unit that is efficient and 99% recyclable. Not only does it work on water pressure alone, it doesn t need power zapping water pumps, solenoid valves or electronic taps. Simple Design It eliminates costly parts, and has easy maintenance. No Electronic Waste The unit has no toxic components that is hazardous to people, as well as the environment. Saves Power All units fitted with a 24 hour timer to stop power wastage when not in use. Come grab yourself the most green unit on the market, get the original Boiling Billy by going into your nearest plumbing outlet or Boiling Billy Distributor. 08 WIFFEN PRODUCTS BoilingBilly
GREEN T BOIL N CHILL UNIT Solid Brass Australian Made Tap Twin Filter System 350 kpa PLV Wool Insulation 24/7 Day Timer GT Model Easy and inexpensive to repair Splash free water delivery All taps comply with AS1428.1 and 1428.2 (Disabili ty Access) 1/4 turn lever action tap handle No expensive pumps, solenoid valves or drainage required. Only requires water p ressure to operate Optional - Remote controlled boiling water safety cut off system Font-In bench and Child safety lock Models Available Model No. Boiling Rating Chilled No. Cups (KW) Cups per hr GTBC 10/40 10 1.8 40 GTBC 20/40 20 2.4 40 GTBC 20/80 20 2.4 80 GTBC 40/40 40 2.4 40 Model No. Boiling Rating Cups No. Cups (KW) perhr recovery GT 1.25 10 1.8 90 GT 2.5 20 2.4 110 GT 5 40 2.4 110 GT 5 (4.8) 40 4.8 220 GTBC 40/80 40 2.4 80 10 Amp, 15 Amp and 20 Amp units available BoilingBilly WIFFEN PRODUCTS 09
ULTIMIX ULTIMIX BOIL N BOIL N CHILL CHILL UNIT UNIT THE ULTIMATE UNDER SINK BOIL AND CHILL UNIT. Filter system supplied. All fittings are supplied for installation of boiling & chilled modules. ie. twin filter system for all area and combined dual check valve with 350 kpa P.L.V. 10 amp power supply is for standard installation. Connect to cold water supply only 280-2000 kpa. The water supply must be potable. Boiling water module to be connected under bench, only the tap dispenser to be visible. Solid brass tap. Ceramic disc lever action tap handle. Electronic control unit is an integral part of the element, which maintains a temperature within one degree celsius of set point - boil dry protection and micro temp protect circuitry. No expensive pumps, solenoid valves. Venturi system only requires water pressure to operate Example if boiling and ambient filtered water is required, specify BBM (check specifications sheet) OPTIONAL Remote controlled boiling water safety cut off system Under bench font 010 WIFFEN PRODUCTS BoilingBilly
COMBINED COMBINED BOILING BOILING & & CHILLED CHILLED FILTERED FILTERED MODELS MODELS Combined boiling and chilled filtered models TYPICAL INSTALLATION TWIN FILTER SYSTEM 54 mm Model Boiling Rating Chilled No. No. Cups (KW) Cups per hr 150 mm 85 mm 220 mm BBCM10/40 10 1.8 40 BLUE 1 BBCM20/40 20 2.4 40 BBCM20/80 20 2.4 80 DOUBLE POWER POINT 350 PLV TO MAIN WATER SUPPLY WHITE IN WHITE ORANGE BLACK COPPER OUT BBCM40/40 40 2.4 40 UNDERSIDE OF TAP BBCM40/80 40 2.4 80 5/16 Dia. Boiling Water Outlet COPPER 3/8 Drain 3/16 Dia. Vent 1/4 Dia. Chiller Outlet WHITE ORANGE CHILLER BWU *optional 3, 3.6, 4.8 & 6 Kw 1/4 BSW (2 Places) 1/4 Dia. Inlet Boiling Water Unit BLACK 54mm 1/4 Dia. Chiller Inlet WHITE BLUE 1/4 Dia. Main Water Supply to Tap 1 Silicone tube pipe connected to drain clamp and fixed to sink S bend above water level with rubber seal between clamp and drain pipe. Push on silicone tube (3/80) Combined boiling and ambient filtered models Boiling N umber Cup/Hr Rating Height Width Depth Module of cups recovery kw mm mm mm BBM10 10 90 1.8 335 180 150 BBM20 20 110 2.4 325 245 290 BBM40 40 110 2.4 480 245 290 Combined chilled and ambient filtered models Chilled Cups per Litres per Height Width Depth Module hour hour mm mm mm BCM6 40 7 280 205 405 BCM10 100 10-14 250 180 500 Boiling Water= 200ml Chilled water cups = 160ml Specifications are subject to change without notice. BoilingBilly WIFFEN PRODUCTS 011
O THE ORIGINAL THE ORIGINAL UNDERSINK UNDERSINK BOILING BOILING BILLY BILLY THE NEW GENERATION IN BOILING WATER TECHNOLOGY. IDEAL FOR TEA, COFFEE! The unit is located under the sink. The copper body comprises a storage tank and an expansion chamber. Element controls temperature and boil dry protection. Solid brass, rapid action, 1/4 turn lever tap handle or spring loaded tap handle. Solid brass swivel bi-flo spout. AS 3500 spill tray not required up to seven litres. No expensive pumps, solenoid valves or drainage required. A 350 kpa pressure limiting valve must be fitted for maximum efficiency in all areas. RECOMMENDED: A filter system is to be fitted to all units OPTIONAL: Remote controlled boiling water safety cut off system 130 100 400 max 10 AMP H BOILING BILLY W SPECIFICATIONS BOILING BILLY UNDERSINK SERIES ONE CUP (200ML CUPS) Model Capacity No. Of Cup/Hr Rating Height Width No. Litres Cups Recovery Kw mm mm TD 1.25 1.25 10-13 90 1.8 335 180 TD 2.5 2.5 15-20 110 2.4 325 245 TD 5 5 30-40 110 2.4 480 245 Depth mm 150 290 290 Optional 4.8 & 6kw Specifications are subject to change without notice. 012 WIFFEN PRODUCTS BoilingBilly
DUAL DUALMATE NOW YOU CAN HAVE BOILING WATER AND HOT WATER FROM THE ONE UNIT All main valves supplied. Simple installation. Supplied with 2 metre 10 amp cord and plug with insulated earth pins. Ideal for office and work staff kitchens. Saves power and space. Replaces the need to specify separate boiling water and hot water unit, one unique cylinder does both. Dual Mates are compact and sit in under the sink and supplies boiling water for tea and coffee via a brass chrome plated tap and hot water to the usual basin set mixed all from one unit. Tap Base Size 36o Hot Water Cold Water Boiling Water Hole Size To Cold Tap To Hot Tap Cold To ECV Hot 10 amps Hot ECV Limiting Valve TVA Cold Cold Water Supply PLV 350KPa TVA TYPICAL INSTALLATION SPECIFICATIONS BOILING WATER CUPS - 200ML 220ml-Cups Hot Water Boiling Water Height Width Depth DM Boiling Water (Ltrs) Recovery Cups HR mm mm mm KW 40/12 40 12 110 480 245 290 2.4 Optional: 4.8kw & 6kw Specifications are subject to change without notice. BoilingBilly WIFFEN PRODUCTS 013
AUSTRALIAN AUSTRALIAN AGENTS AGENTS QLD Mark Anderson Sales Building 4/84 Ingleston Rd Wakerley, QLD 4154 Ph: 07 3890 8011 Fax: 07 3890 8022 Email: mark@masales.com.au Web: www.markandersonsales.com.au VIC/SA Interchange Sales and Marketing Unit 4/49 Corporate Blvd Bayswater, VIC 3153 Ph: 03 9729 6411 Fax: 03 9729 5722 Email: interchange@netspace.net.au WA Complete Enviro Solutions Unit 3/36 Irvine Dr Mazaga, WA 6090 Ph: 08 9248 8802 Fax: 08 9248 8872 Email: ken@cesperth.com.au Web: www.completeenvirosolutions.com.au TAS GJ Trade Supplies 8 Fergusson Drive Quoiba TAS 7310 Ph: 03 6424 7008 Fax: 03 6424 7009 Email: gjtradesupplies@bigpond.com NSW Nekeema Unit 2, 10 Doyle Ave Unanderra NSW 2526 Ph: 02 4272 3264 Fax: 02 9332 6482 Email: sales@nekeema.com.au Web: www.nekeema.com.au 014 WIFFEN PRODUCTS BoilingBilly
WARRANTY WARRANTY 7 YEAR WARRANTY Should any part of the boiling water unit fail within:- 1. Year of installation, that part will be replaced or repaired by the manufacturer or its authorised service agent free of charge as per warranty conditions 1 to 6 and warranty exclusions 1 to 4. Wiffen Products Pty. Ltd. hereby warrants that in addition to the protection given to Australian consumers under the Trade Practices Act, any other similar Act or Law, we will if necessary replace or repair on the terms and conditions set out hereunder any boiling water unit manufactured by this company. WARRANTY CONDITIONS 1. The boiling water unit must be installed to comply with all relevant statutory and local requirements for the area where the boiling water unit is installed. 2. The boiling water unit must be installed in accordance with manufacturers installation instructions supplied with the unit. 3. When a boiling water unit is repaired or replaced under this warranty, the component or boiling water unit replaced does not have the benefit of a new warranty and only the balance of the original warranty period will remain effective. 4. Only the boiling water unit and genuine company replacement parts are covered by this warranty. Electrical or plumbing parts supplied by the installer are not covered by this warranty. 5. The cost of insurance, travelling and transport between the installed site and the nearest manufacturers authorised agents premises will be to the account of the customer where unit is installed outside the boundaries of the metropolitan area as defined by the manufacturer or beyond 25km from a manufacturers or an authorised agent in a regional town or centre. 6. Where a filter is specified by the manufacturer or supplied as original equipment with the boiling water unit, the filter that is specified or supplied must be fitted on the cold water supply to the boiling water unit, and maintained by the owner in a serviceable and working condition, while ever the boiling water unit is in service. Failure to fit and maintain the filter will render this warranty void. Guarantee period - Twelve (12) months from the date of sale by Wiffen Products Pty. Ltd or Twentyfour (24) months from date of manufacture by Wiffen Products Pty. Ltd., whichever period shall first expire. WARRANTY EXCLUSIONS The warranty may become void by the following exclusions and service charge for labour and parts (if necessary) could become a cost to the owner. 1. Failure due to misuse and/or incorrect installation; Acts of God; Water conditions; Accidental Damage; Unauthorised attempts at repair of the boiling water unit. 2. Where there is a failure of the electricity or water supply; where water leaks are caused by the plumbing and not the boiling water unit or its components; where there is no flow of hot water due to faulty plumbing or a filter blockage; where the complaint is related to low or high water pressure or excessive water pressure; where it is found that there is nothing wrong with the boiling water unit. 3. Repairs to a boiling water unit due to scale formation or where the boiling water unit has been fitted to a hard or harmful water supply or the recommended or supplied filter has not been fitted and maintained. 4. Where the boiling water unit has been installed in a position that does not comply with the manufacturers installation instructions or relevant statutory requirements or subject to any statutory provisions to the contrary claims for damage to walls, furniture, carpets, foundations or the need for major dismantling or removal of cupboards, doors or walls or any other consequential loss either directly or indirectly due to leakage from a boiling water unit. Chiller units have a twelve month warranty on parts and labour from date of sale. Chiller units have the same warranty exclusions as boiling water units. BoilingBilly WIFFEN PRODUCTS 015
WIFFEN PRODUCTS PTY LTD A.B.N. 95 073 810 616 1/33 Cedar Parade, Moolap, Victoria, Australia, 3221. Tel: (03) 5248 7072 Fax: (03) 5248 7272 AS 3498 Lic. W359 ISSUE 4 / 2014