NEMZETKÖZI SZABVÁNYKIADVÁNYOK ISO-szabványkiadványok A jegyzék az ISO Update 2015. márciusi kiadása alapján készült, és az ISO által kiadott, 2015. február 1-je és 28-a között megjelent új nemzetközi szabványkiadványokat és visszavont szabványokat tartalmazza az ISO műszaki bizottságok (TC-k) sorrendjében. 2015. február 1-je és 28-a között kiadott ISO-szabványok * Csak angolul áll rendelkezésre. ** Korábban angol nyelven kiadott nemzetközi szabvány francia nyelvű kiadásának megjelenése. IIW ISO 10447:2015 ISO 14323:2015 COPOLCO Guide 50:2014 REMCO ISO Guide 30:2015 ISO Guide 33:2015 TC 6 ISO 12625-9:2015 ISO 12625-15:2015 ISO 12625-16:2015 TC 10 ISO 3098- ISO/TS 81346-10:2015 International Institute of Welding Resistance welding Testing of welds Peel and chisel testing of resistance spot and projection welds Resistance welding Destructive testing of welds Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds Committee on consumer policy Safety aspects Guidelines for child safety in standards and other specifications Committee on reference materials Reference materials Selected terms and definitions * Reference materials Good practice in using reference materials Paper, board and pulps Tissue paper and tissue products Part 9: Determination of ball burst strength Tissue paper and tissue products Part 15: Determination of optical properties Measurement of brightness and colour with C/2 (indoor daylight) illuminant Tissue paper and tissue products Part 16: Determination of optical properties Opacity (paper backing) Diffuse reflectance method Technical product documentation Technical product documentation Lettering Part 1: General requirements * Industrial systems, installations and equipment and industrial products Structuring principles and reference designation Part 10: Power plants 1
TC 20 3:2015 4:2015 5:2015 6:2015 TC 21 ISO 14520-1 ISO 14520-14:2015 ISO 14520-15:2015 TC 23 ISO 13693- TC 24 ISO 2789 TC 28 ISO 3679:2015 TC 29 Aircraft and space vehicles * Aerospace series Hydraulic filter elements Test methods Part 1: Test sequence * Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning * Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity * Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating * Aerospace series Hydraulic filter elements Test methods Part 5: Resistance to flow fatigue * Aerospace series Hydraulic filter elements Test methods Part 6: Initial cleanliness level Equipment for fire protection and fire fighting * Gaseous fire-extinguishing systems Physical properties and system design Part 12: IG-01 extinguishant * Gaseous fire-extinguishing systems Physical properties and system design Part 14: IG-55 extinguishant * Gaseous fire-extinguishing systems Physical properties and system design Part 15: IG-541 extinguishant Tractors and machinery for agriculture and forestry * Irrigation equipment Safety devices for chemigation Part 2: Chemigation valve assemblies from DN 75 (3") to DN 350 (14") Particle characterization including sieving * Aerosol particle number concentration Calibration of condensation particle counters Petroleum products and related products of synthetic or biological origin Determination of flash no-flash and flash point Rapid equilibrium closed cup method Small tools ISO 1711- * Assembly tools for screws and nuts Technical specifications Part 1: Hand-operated wrenches and sockets ISO 1711- * Assembly tools for screws and nuts Technical specifications Part 2: 2
Machine-operated sockets (impact) TC 39 ISO 13041-5:2015 Machine tools * Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of speeds and interpolations ISO 14137:2015 * Test conditions for wire electrical-discharge machines (wire EDM) Testing of the accuracy TC 44 Welding and allied processes ISO 23278:2015 Non-destructive testing of welds Magnetic particle testing Acceptance levels ISO 5175:1987/Amd TC 45 ISO 1823:2015 ISO 28017:2011/Amd ISO 1817:2015 ISO 23794:2015 TC 46 ISO 11620:2014 TC 59 Equipment used in gas welding, cutting and allied processes Safety devices for fuel gases and oxygen or compressed air General specifications, requirements and tests Amendment 1 Rubber and rubber products * Rubber hose and hose assemblies for oil suction and discharge service Specification Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications Specification Amendment 1 * Rubber, vulcanized or thermoplastic Determination of the effect of liquids * Rubber, vulcanized or thermoplastic Abrasion testing Guidance Information and documentation Information and documentation Library performance indicators Buildings and civil engineering works ISO 16745:2015 * Environmental performance of buildings Carbon metric of a building Use stage TC 61 ISO 16396- ISO 19069- TC 72 ISO 93-1:2006/Amd Plastics Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system, marking of products and basis for specifications Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications Textile machinery and accessories * Textile machinery and accessories Cylindrical sliver cans Part 1: Main dimensions Amendment 1 3
TC 76 ISO 11418-5:2015 TC 85 ISO 18589-3:2015 ISO 1565 TC 93 ISO 10504:2013 TC 107 ISO 4528:2015 TC 118 ISO 10439- ISO 10439- ISO 10439-3:2015 ISO 10439-4:2015 TC 120 ISO 1493 TC 121 IEC 80601-2- Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use * Containers and accessories for pharmaceutical preparations Part 5: Dropper assemblies Nuclear energy, nuclear technologies, and radiological protection * Measurement of radioactivity in the environment Soil Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry Nuclear energy Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets Inert gas extraction and conductivity detection method Starch (including derivatives and by-products) Starch derivatives Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups Method using highperformance liquid chromatography Metallic and other inorganic coatings Vitreous and porcelain enamel finishes Guide to selection of test methods for vitreous and porcelain enamelled areas of articles Compressors and pneumatic tools, machines and equipment Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 2: Nonintegrally geared centrifugal and axial compressors Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 3: Integrally geared centrifugal compressors Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 4: Expandercompressors Leather Leather Guide to the selection of leather for apparel (excluding furs) Anaesthetic and respiratory equipment * Medical electrical equipment Part 2-35: Particular requirements for the 4
35:2009/Cor IEC 80601-2- 35:2009/Cor TC 126 ISO/TR 19478-1:2014 TC 138 ISO 3459:2015 ISO 3503:2015 ISO 13844:2015 ISO 13845:2015 TC 142 ISO 15957:2015 TC 146 ISO 25597:2013 TC 150 ISO 11663:2014 TC 157 ISO 7439:2015 TC 158 ISO 614 basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use Technical Corrigendum 1 * Medical electrical equipment Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use Technical Corrigendum 2 Tobacco and tobacco products ISO and Health Canada intense smoking parameters Part 1: Results of an international machine smoking study Plastics pipes, fittings and valves for the transport of fluids Plastic piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under negative pressure Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under internal pressure of assemblies subjected to bending Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes Test method for leaktightness under negative pressure, angular deflection and deformation Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes Test method for leaktightness under internal pressure and with angular deflection Cleaning equipment for air and other gases Test dusts for evaluating air cleaning equipment Air quality Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution Implants for surgery Quality of dialysis fluid for haemodialysis and related therapies Non-systemic contraceptives and STI barrier prophylactics Copper-bearing contraceptive intrauterine devices Requirements and tests Analysis of gases Gas analysis Contents of certificates for calibration gas mixtures 5
ISO 19229:2015 TC 164 ISO 6508- ISO 6508- ISO 6508-3:2015 TC 171 ISO 17469- TC 172 * Gas analysis Purity analysis and the treatment of purity data Mechanical testing of metals Metallic materials Rockwell hardness test Part 1: Test method Metallic materials Rockwell hardness test Part 2: Verification and calibration of testing machines and indenters Metallic materials Rockwell hardness test Part 3: Calibration of reference blocks Document management applications * Document management Strategy markup language (StratML) Part 1: StratML core elements Optics and photonics ISO 9022- * Optics and photonics Environmental test methods Part 2: Cold, heat and humidity ISO 9022-3:2015 * Optics and photonics Environmental test methods Part 3: Mechanical stress ISO 9022-6:2015 * Optics and photonics Environmental test methods Part 6: Dust ISO 9022-7:2015 * Optics and photonics Environmental test methods Part 7: Resistance to drip or rain ISO 9022-8:2015 * Optics and photonics Environmental test methods Part 8: High internal pressure, low internal pressure, immersion ISO 9022-20:2015 TC 174 * Optics and photonics Environmental test methods Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide Jewellery ISO 11210:2014 Jewellery Determination of platinum in platinum jewellery alloys Gravimetric method after precipitation of diammonium hexachloroplatinate ISO 11426:2014 Jewellery Determination of gold in gold jewellery alloys Cupellation method (fire assay) ISO 15096:2014 Jewellery Determination of silver in 999 0/00 silver jewellery alloys Difference method using ICP-OES TC 192 ISO 1937 TC 210 Gas turbines * Microturbines applications Safety Quality management and corresponding general aspects for medical devices 6
IEC 62366- TC 228 ISO 18065:2015 TC 238 ISO 16995:2015 TC 242 ISO 50006:2014 TC 244 ISO 13574:2015 TMBG Guide 71:2014 IULTCS ISO 17070:2015 ISO 17228:2015 JTC 1 29182-7:2015 17811-3300 3300 * Medical devices Part 1: Application of usability engineering to medical devices Tourism and related services * Tourism and related services Tourist services for public use provided by Natural Protected Areas Authorities Requirements Solid biofuels Solid biofuels Determination of the water soluble chloride, sodium and potassium content Energy Management Energy management systems Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) General principles and guidance Industrial furnaces and associated processing equipment Industrial furnaces and associated processing equipment Vocabulary Technical Management Board - groups Guide for addressing accessibility in standards International Union of Leather Technologists and Chemists Societies Leather Chemical tests Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content Leather Tests for colour fastness Change in colour with accelerated ageing Information technology * Information technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 7: Interoperability guidelines * Information technology Device control and management Part 2: Specification of Device Control and Management Protocol * Information technology Process assessment Concepts and terminology * Information technology Process assessment Requirements for performing process assessment * Information technology Process assessment Requirements for 7
33003:2015 process measurement frameworks 33004:2015 33020:2015 TS 18661-27039:2015 15444-1:2004/Cor 3:2015 18000-4:2015 18004:2015 TR 20000-9:2015 38500:2015 * Information technology Process assessment Requirements for process reference, process assessment and maturity models * Information technology Process assessment Process measurement framework for assessment of process capability * Information Technology Programming languages, their environments, and system software interfaces Floating-point extensions for C Part 2: Decimal floating-point arithmetic * Information technology Security techniques Selection, deployment and operations of intrusion detection systems (IDPS) * Information technology JPEG 2000 image coding system: Core coding system Part 1: Technical Corrigendum 3 * Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz Information technology Automatic identification and data capture techniques QR Code bar code symbology specification * Information technology Service management Part 9: Guidance on the application of 20000-1 to cloud services * Information technology Governance of IT for the organization 2015. február 1-je és 28-a között visszavont ISO-szabványok REMCO Committee on reference materials ISO Guide 32:1997 (replaced by ISO Guide 33:2015) TC 10 Technical product documentation ISO 3098-0:1997 (replaced by ISO 3098-) ISO/TS 16952-10:2008 TC 28 (replaced by ISO/TS 81346-10:2015) Petroleum products and related products of synthetic or biological origin ISO 3680:2004 (replaced by ISO 3679:2015) 8
TC 45 Rubber and rubber products ISO 1823-1:1997 (replaced by ISO 1823:2015) ISO 1823-2:1997 (replaced by ISO 1823:2015) TC 61 Plastics ISO 1873-1:1995 (replaced by ISO 19069-) ISO 1874-1:2010 (replaced by ISO 16396-) TC 118 Compressors and pneumatic tools, machines and equipment ISO 10439:2002 (replaced by ISO 10439-, ISO 10439-, ISO 10439-3:2015, ISO 10439-4:2015) TC 188 ISO 12217-1:2002/Amd 1:2009 ISO 12217-3:2002/Amd 1:2009 TC 210 Small craft (replaced by ) (replaced by ) Quality management and corresponding general aspects for medical devices IEC 62366:2007 (replaced by IEC 62366-) IEC 62366:2007/Amd 1:2014 JTC 1 15504-1:2004 (replaced by IEC 62366-) Information technology (replaced by 3300) 18043:2006 (replaced by 27039:2015) 9