Product manual 302 B - /0 Date: pril 1 Supersedes: none ir cooled water chillers 120.2. cooling from 0 to 110 0 Hz - refrigerant: HCFC 22, HFC 0C, HFC 13a high ambient
- ir cooled water chillers The newly redesigned McQuay (high ambient temperature) air cooled water chillers offer you unsurpassed efficiency, flexibility, reliability, and serviceability in a total package concept. Improved to include the latest heat transfer surface design and the most advanced and efficient reciprocating compressors in the industry, the redesigned chillers exceed efficiency requirements. The McQuay air cooled water chillers are completely factory assembled, piped, wired and shipped in one piece, ready for installation. Each unit consists of compressors, insulated evaporator, condenser coils with independent subcooler circuits, multiple propeller type direct drive condenser fans with independent fan motors, heavy-gauge weatherproof casing and weatherproof electrical control centre containing all necessary and operating controls and motor starting equipment. Highly flexible design The units is available in 2 sizes covering a range from 0 to 110 nominal cooling with coolant temperature between +10 C and - C. Many optional features can be added to fit all installation requirements. Low installation costs The complete assembly of the units and function testing at the factory reduces the cost of installation on site. rigid steel base distributes the weight of the unit to the support points and allows simple installation by an easy access to the lifting points. The units are designed with a single point three-phase mains connection. ll units are supplied complete with refrigerants HCFC 22, HFC 0C or HFC 13a. Low maintenance costs The microprocessor safety and control system allows the trouble shooting of any type of functional anomaly, enabling simpler, safer and timely intervention by the unit maintenance personnel. The oil heater in the sump on each compressor and a complete set of controls and safety devices protect the unit from abnormal operating conditions. Code requirements ll units are designed and manufactured in accordance with applicable selections of the following which are equivalent to merican ir-conditioning industry applicable codes: Rating of chillers: UNI 01 Construction of pressure vessel: TÜV Standards (optional) Electrical codes: IEC 20-1 CEI - Elect. & Safety Codes Safety Codes: CEI-EN 020-1 Codes Manufacturing Quality Stds: ISO 001 Factory testing Each unit is pressure tested, evacuated and charged with the refrigerant requested. It is then tested at the factory s test bench under the design conditions specified by the customer. Upon request, a second series of tests can be carried out witnessed by the customer (see option 2). Before shipment, each unit is re-checked for pressure and refrigerant charge control. General characteristics Cabinet and structure The cabinet is made of galvanized steel sheet and painted to provide a high resistance to corrosion. The unit base frame has holes to lift the unit with ropes for an easy installation. The weight is uniformly distributed along the profiles of the base and this facilitates the arrangement of the unit s bases and the support structures. The electrical and control equipment is located inside cubicles which can be accessed by key locked doors complete with door interlocking on the power cabinet. Semi-hermetic compressors Compressors are reciprocating type, or cylinders with suction and discharge valves of the disc type. The forced lubrication is obtained through a reversible gear type pump. The oil heater is automatically switched on when the compressor stops to prevent oil dilution from liquid refrigerant and in order to keep the right fluidity. The electrical motors are protected against thermal over load through thermistors embedded in each of the three phases of the statoric windings. The units, are equipped with McQuay 00 and 00 S compressors. Evaporator The evaporator is a direct expansion shell-and-tube type with water flowing in the baffled shell side and refrigerant flowing through the tubes. The evaporator are designed in more separate refrigerant circuits, one for each compressor. The evaporator is manufactured with a carbon steel shell and seamless high efficiency copper tubes. Roll expansion anchors the refrigerant tubes in the heavy carbon steel tube sheet. Water baffles are polypropylene to resist corrosion. Refrigerant head is in carbon steel and is removable to permit access to the tubes. The evaporator is wrapped with closed-cell heat insulation. Condenser coils The new units are constructed with internally enhanced seamless copper tubes arranged in a staggered row pattern and mechanically expanded into McQuay lanced and rippled aluminium condenser fins with full fin collars. n integral subcooling circuit provided sufficient sub cooling to effectively eliminate liquid flashing and increases in cooling up to % without increasing in absorbed power. Condenser coil fans The condenser fans are of the helical type with wing-profile blades to achieve a better performance. The direct coupling with the electrical motor eliminates any problems as regards the application of transmission devices and reduces the vibrations caused by the functioning. The motors are supplied as standard totally enclosed (Insulation class F) and are of the three-phase type; they are protected against overloading and short circuits by circuit breakers located inside the electrical control panel. The fans operate in formed bell shaped orifices. Electrical control panel The components of both the power and the control are split into two sections of one main panel, accessed by individual key locked doors to prevent unauthorised entry. The panel is manufactured to insure protection in all weather conditions and the doors are fitted with door-stays to prevent accidental closure. The power panel is fitted with a door interlocked mains isolator to prevent access while it is live. Power section includes: This section of the panel includes contactors, all the fuses for the compressors and the condenser fans, control circuit transformer. dditional space is provided for the installation of the various optional accessories provided to enhance the capabilities of the units. Control section includes: Microprocessor is installed as 302 B - /0 - page 2/2
standard on all the units. Its touch sensitive keypad consists of keys that can be used to alter unit set points and control commands. display on two lines illustrates the machine's operating status & programable parameters (setpoints) e.g. temperatures & pressures of fluids (water, refrigerant) controller maximise the McQuay chillers energy efficiency and reliability characteristics. It uses sophisticated software with predictive logic to select the most energy efficient combination of compressor, condenser fan to maintain stable operating conditions and maximise energy efficiency. The compressors are automatically rotated to ensure equal operating hours. Controller intervenes to protect critical components in response to external signals from its system sensors measuring: motor temperatures, refrigerant gas and oil pressures, electrical supply and evaporator. Refrigerant circuit The units are equipped with a complete refrigerant circuit charge HCFC22, HFC0C or HFC13a. The circuit consists of insulated copper pipes on the suction line and is complete with filter driers, moisture indicators, liquid sight glass, thermostatic expansion valves. coustic options Two versions are available. ST (Standard) CN (Compressor noise) for a reduced sound level this unit is fitted with sound proofing cabinets around the compressors insulated with absorbent acoustic material. ccessories and Options 0. Double set point version (CB) - Dual leaving glycol mixture temperature setpoints. The lower setpoint can go down to - C. 11. Compressor thermal overload relays - Safety devices against compressor motor overloading in addition to the normal protection envisaged by the electrical windings. 1. Phase monitor - The phase monitor controls the voltage values on the supply line stopping the unit when the calibration threshold is reached (± 10%). This safety device is automatically reset. 1. mmeter and voltmeter - Digital meters of unit drawn amperes and voltage values, installed on the electrical control panel. 1. Condenser power factor correction - Installed on the electrical control panel to ensure it conforms to the plant rules. (McQuay advices maximum 0,). 1. 110 Volt control circuit - The 110 Volt control circuit are supplied by an appropriate current transformer installed on the electrical control panel. 21. Main Switch 22. Transformer - Transformer for auxiliary circuit. 32. Condenser coil guards - Metal protection guards fixed on all the external surface of the condenser coils. 33. Compressor guards - To prevent unauthorised access to the cooling unit components. 3. Cu-Cu condensing coils - To give better protection against corrosion by aggressive environments. 3. Cu-Cu-Sn condensing coils - To give better protection against corrosion in aggressive environments and by salty air. 3. lucoat condensing coils - Fins are protected by a special epoxy paint with a high resistance to corrosion. 2. Flow switch - Supplied separately to be wired and installed on the evaporator water piping (by the customer). 0. Suction shut-off valve - Suction shut-off valve installed on the suction port (STD on HFC 13a & HFC0C). 1. Gauges - Gauges to control high and low gas pressure and lubricant oil pressure. 0b. MicroTech - Microprocessor (only for two circuit). 0. Spreader bars - Facilitate the lifting of the units keeping the ropes away from the unit's casing. 2. Wooden box packing - Self-supporting wooden box internally insulated and suitable for shipment by sea. 3. Open Cage packing - Protection with polythene and wooden cage for transport and protection before the installation.. Rubber type antivibration mounts - Supplied separately, these are positioned under the base of the unit during installation. Ideal to reduce the vibrations when the unit is floor mounted.. Spring type antivibration mounts - Supplied separately, these are positioned under the base of the unit during installation. Ideal for dampening vibrations for installation on roofs and metallic structures.. TUV approval - If required, the cooling units can be TUV tested and certified. 2. Witness tests - The units are normally tested at the test bench prior to the shipment. On request, a second test can be carried out, at customer s presence, in accordance with the procedures indicated on the test form. Selection Procedures The procedure for selecting the cooling duty and the power absorbed by the compressors of the units is indicated below. 1. The tables Standard unit performance allow to determine the cooling, power absorbed by the compressor motors with cooled water temperatures between + C and + C, ambient air temperatures between + 2 C and +2 C. 2. lthough the data can be interpolated, extrapolation is not permitted. For conditions other than those shown in the tables, contact McQuay Product Group. 3. The performance of the units refers to C of t of chilled water. The increase or reduction of the flow rate of chilled water produces a reduction and an increase in the cooling performance which is negligible. To ensure the correct functioning of the exchanger, it is advisable to maintain the water s t within 3 C C.. The performance figures are based on Fouling factor of 0.0 m2 C/. In the event of different values, the correction coefficients indicated in Table 2 should be used.. The performance is influenced by air density. Table 3 gives the correction factors for the various altitudes above sea level.. The power absorbed values given in the standard performance tables refer to the compressors only. The 302 B - /0 - page 3/2
current absorbed by the fans is given in the electrical characteristics table.. To obtain the flow resistance through the evaporator, use the diagrams on page. Example of selection of an unit Data: Cooling required: 0 mbient air temperature: + C Temperature of cooled water: from 12 to C Refrigerant: HCFC22 Fouling factor: 0.132 m2 C/ ltitude above sea level: 00 m Glycol content: none 1. The cooling correction coefficient for fouling 0.132 m2 C/ (Table 2) is 0.. 2. The cooling correction coefficient for installation at 00 m above sea level (Table 3) is 0.. 3. The corrected cooling is 0 /0./0. = 1.. The cooling unit to satisfy this is 230.2 ST 022. This unit will have the following operating data: Cooling : x 0. x 0. = 2, Power absorbed by compressors: 23,1 x 0. x 1.01 = 23,3. Chilled water flow rate: 2, /.1/(12-) = 31,2 l/s. Pressure drop indicated by the diagram on page with a cooled water flow of 31,2 l/s on the straight line corresponding to the unit 230.2 we find a pressure drop of 32 kpa. Water content in cooling circuits The cooled water distribution circuits should have a minimum water content to avoid excessive intermittent operation of the compressors. In fact, each time the compressor starts up, an excessive quantity of oil goes from the compressor s sump and simultaneously there is a rise in the temperature of the compressor motor s stator due to the inrush current during the start-up. To prevent damage to the compressors, McQuay has envisaged the application of a device to limit frequent stops and restarts. During the span of one hour there will be no more than starts of the compressor. The plant side should therefore ensure that the overall water content allows a more constant functioning of the unit and consequently greater environmental comfort. The minimum installation water content envisaged should be calculated with a certain approximation using this formula: (1) Q = P x p 2 where: Q = minimum content of the plant expressed in litres. P = cooling of the plant expressed in W p = minimum unloading percentage plant with a cooling in which the cooling unit LR 120.2 ST 022 equipped with two compressors is applied, should have a minimum content of water calculated on the basis of the minimum cooling, which for this type of equipment is 2% of the nominal. Q = 000 x 0.2 = 0 l 2 For a more accurate determination of the quantity of water, it is advisable to contact the designer of the plant.when the sum of the water content of the evaporator, the pipes of the hydraulic circuit and the terminals (coils, exchangers, etc.) is lower than the value obtained, it would be better to opt for a LR McQuay cooling unit equipped with inertial tank (optional). Table 2 - Fouling factor Fouling factor m2 C/ 0,0 0,132 0,30 Cooling correction factor 1,000 0, 0,1 Power input correction factor 1,000 0, 0,3 Table 1 - Operating limits Max ambient temperature Min ambient temperature Max entering evap. water temp. (without glycol) Min leaving evap. water temp. (without glycol) C C C C HCFC 22 ST CN 2 1 2 1 HFC 0C ST CN 2 1 2 1 HFC 13a ST CN 2 1 2 1 Table 3 - ltitude correction factor Elevation above sea level (m) Barometric pressure (mbar) 0 1013 Cooling cap. correction factor 1,000 Power input correction factor 1,000 300 0,3 1,00 00 2 0, 1,00 00 0 0, 1,01 1200 0,3 1,021 100 3 0, 1,02 100 12 0,0 1,031 302 B - /0 - page /2
Installation notes Handling ll moving and handling may damage the unit if some conditions are not scrupulously observed. The units should be lifted with a crane using long ropes anchored to the holes on the frame of the unit s base and by using the upper spacer bars (see accessory 0) to prevent the ropes from damaging the condenser coils. Location The LR units are produced for outside installation on roofs, floors or below ground level on condition that the area is free from obstacles for the passage of the condensation air. The unit should be positioned on solid foundations and perfectly level; in the case of installation on roofs or floors, it may be advisable to arrange the use of suitable weight distribution beams. When the units are installed on the ground, a concrete base at least 20 mm wider and longer than the unit s footprint should be laid. Furthermore, this base should be sufficiently robust to withstand the unit weight mentioned in the technical data table. When the units are positioned in areas which are easily accessible by persons or animals, it is advisable to fit guards to protect the condenser coil guards (see accessory 32) and, when necessary, also guards to protect the compressor (see accessory 33). Space requirements The units are air-cooled, hence it is important to observe the minimum distances which guarantee the best ventilation of the condenser coils. Limitations of space reducing the air flow could cause significant reductions in cooling, an increase in electricity consumption and, in some cases, the unit may stop functioning as a result of the high condensation pressure. The fans do not allow the use of ducts which have high flow resistance, hence is should be ensured that the output air cannot recycle itself inside the condenser coils. The units should be positioned such that there is sufficient distance between the coils and any obstacles to improve ventilation and also to facilitate inspection. When two or more units are positioned side by side it is recommended that the condenser coils are at least 3000 mm distance from one another. Smaller distances could cause the recirculation of hot air. If the units are positioned in places surrounded by walls or obstacles of the same height as the units, the units should be at least 3000 mm from said obstacles. For other installation solutions, consult McQuay technicians. coustic protection The low noise levels of the LR units means that they meet most of the most restrictive regulations, thanks to the availability of two versions with different sound levels: the standard version (ST), the version with sound proofing cabinet on compressors (CN). When the noise level must meet special requirements it will be necessary to pay the maximum attention to ensure the perfect insulation of the unit from the support base by applying appropriate vibrationdampening devices (see accessories and ), applying vibration-dampening mounts on the water pipes and on the electrical connections. Nomenclature 200.2 ST 022 ir cooled water chiller High ambient temperature Size: 200 Ton No. of compressor 2 3 Version: ST Standard version CN Sound proofing cabinets on compressors Refrigerant: 022 HCFC 22 0 HFC 0C 13 HFC 13a 302 B - /0 - page /2
Physical data ST, CN 120.2 23.3 " ST, CN " Unit size 120.2 13.2 1.2 11.2 11.2 Cooling (HCFC 22) (1) Power input (HCFC 22) (1) 0, 1, 3, 13, 2,1 1,1 3,2 1,, 20, Cooling (HFC 0C) (1) Power input (HFC 0C) (1) 32, 1, 30, 13,,3 1,1 20,1 1, 2,1 20, Cooling (HFC 13a) (1) Power input (HFC 13a) (1) 2,3 0, 23, 100, 30, 10, 321,3 121, 3,3 12, McQuay compressor No./Series 0+0 0+0 0+0 0+0 0+0 No. of refrigerant circuit 2 2 2 2 2 Refrigerant charge HCFC 22 No. of reduction steps Std. 3+3 3+3 3+3 3+3 3+2 Opt. Condenser fans No. / Nominal power Total air flow m3/s /2,1 3, /2,1 3, /2,1 0, /2,1 0, /2,1, Evaporator No. of evaporator/water volume l 1/131 1/12 1/12 1/10 1/1 Max operating pressure Condenser coil bar 1 1 1 1 1 Coil type Lanced fins - Internally spiral wound tubes Weight Operating weight (LR ST) Shipping weight (LR ST) 3 33 3 30 32 200 32 212 20 32 Operating weight (LR CN) (2) Shipping weight (LR CN) (2) 3 33 0 30 2 00 2 12 20 2 " ST, CN " Unit size 1.2 200.2 21.2 230.2 23.3 Cooling (HCFC 22) (1) Power input (HCFC 22) (1) 1, 21,2 2, 222,, 231,2 0,2 2,3, 2,0 Cooling (HFC 0C) (1) Power input (HFC 0C) (1),2 21,2 0, 222, 3, 231,2,0 2,3 2,2 2,0 Cooling (HFC 13a) (1) Power input (HFC 13a) (1) 32, 13,2 0,0 1,3 3, 1,, 11,,0 1, McQuay compressor No./Series 0+0 0+0 0+0 0+0 2x0+0 No. of refrigerant circuit 2 2 2 2 3 Refrigerant charge HCFC 22 No. of reduction steps Std. 2+2 0+2 2+2 2+2 3+3+3 Opt. - Condenser fans No. / Nominal power Total air flow m3/s /2,1,1 10/2,1 3,3 10/2,1 3,3 12/2,1 3,3 12/2,1,0 Evaporator No. of evaporator/water volume l 1/1 1/13 1/10 1/10 1/2 Max operating pressure Condenser coil bar 1 1 1 1 1 Coil type Lanced fins - Internally spiral wound tubes Weight Operating weight (LR ST) Shipping weight (LR ST) 12 3 20 2 32 00 0 30 01 Operating weight (LR CN) (2) Shipping weight (LR CN) (2) 12 13 020 12 032 200 00 0 11 Note: (1) Nominal cooling and power input are based on: 12/ 0 C entering/leaving evaporator water temperature; 0 C ambient temperature. (2) CN version is the ST one with the sound proof enclosure on the compressors. 302 B - /0 - page /2
Physical data ST, CN 21.3 3. " ST, CN " Unit size 21.3 21.3 20.3 2.3 20.3 Cooling (HCFC 22) (1) Power input (HCFC 22) (1) 20,3 2,, 30,3, 31, 2, 32,3,3 31,1 Cooling (HFC 0C) (1) Power input (HFC 0C) (1), 2, 1,2 30,3 2,3 31,, 32,3 2, 31,1 Cooling (HFC 13a) (1) Power input (HFC 13a) (1) 03, 1, 2, 13, 0, 13,2 3, 202, 00,2 213,0 McQuay compressor No./Series 3x0 2x0+0 0+0+0 3x0 2x0+0 No. of refrigerant circuit 3 3 3 3 3 Refrigerant charge HCFC 22 No. of reduction steps Std. 3+3+3 3+3+2 2+2+3 2+2+2 2+0+2 Opt. - - - - - Condenser fans No. / Nominal power Total air flow m3/s 12/2,1,0 12/2,1,2 12/2,1, 12/2,1 3, 1/2,1,1 Evaporator No. of evaporator/water volume l 1/23 1/20 1/12 1/23 1/23 Max operating pressure bar 1 1 1 1 1 Condenser coil Coil type Weight Operating weight (LR ST) Shipping weight (LR ST) 32 0 22 3 3 21 00 0 Operating weight (LR CN) (2) Shipping weight (LR CN) (2) 2 1 0 1 23 1 20 2 " ST, CN " Unit size 311.3 32.3 3. 3. 3. Cooling (HCFC 22) (1) Power input (HCFC 22) (1),2 3, 10,1 31, 111, 13,0 112, 1,0 110, 22, Cooling (HFC 0C) (1) Power input (HFC 0C) (1),3 3, 102, 31, 10,3 13,0 10,0 1,0 110, 22, Cooling (HFC 13a) (1) Power input (HFC 13a) (1) 2, 223,1, 232,, 21, 1, 21,2 1, 20, McQuay compressor No./Series 2x0+0 3x0 3x0+0 2x0+2x0 0+0x3 No. of refrigerant circuit 3 3 Refrigerant charge HCFC 22 No. of reduction steps Std. 2+2+2 2+2+2 3+3+2+2 3+3+2+2 3+2+2+2 Opt. - - - - - Condenser fans No. / Nominal power Total air flow m3/s 1/2,1, 1/2,1 101,3 1/2,1 100, 1/2,1, 1/2,1,0 Evaporator No. of evaporator/water volume l 1/2 1/21 1/ 1/ 1/ Max operating pressure bar 1 1 1 1 1 Condenser coil Coil type Weight Operating weight (LR ST) Shipping weight (LR ST) 0 32 03 13 2 33 2 3 02 Operating weight (LR CN) (2) Shipping weight (LR CN) (2) 0 20 3 22 3 2 1013 2 Note: (1) Nominal cooling and power input are based on: 12/ 0 C entering/leaving evaporator water temperature; 0 C ambient temperature. (2) CN version is the ST one with the sound proof enclosure on the compressors. 302 B - /0 - page /2
Physical data ST, CN 3.. " ST, CN " Unit size 3. 30. 0. 1. 30.. Cooling (HCFC 22) (1) Power input (HCFC 22) (1) 113, 32, 121, 3, 123,3, 131,2 2, 132,0 0,2 110,0 2, Cooling (HFC 0C) (1) Power input (HFC 0C) (1) 112, 32, 110,0 3, 1202,1, 12, 2, 1311, 0,2 13,1 2, Cooling (HFC 13a) (1) Power input (HFC 13a) (1), 20, 1, 20, 1, 20,, 300, 1,1 310,,0 303,0 McQuay compressor No./Series No. of refrigerant circuit Refrigerant charge HCFC 22 No. of reduction steps Std. Opt. Condenser fans No. / Nominal power Total air flow m3/s Evaporator No. of evaporator/water volume l Max operating pressure bar Condenser coil Coil type Weight Operating weight (LR ST) Shipping weight (LR ST) Operating weight (LR CN) (2) Shipping weight (LR CN) (2) x0 3x0+0 2+2+2+2 2+2+0+2 - - 2x0+2x0 0+3x0 2+2+2+2 0+2+2+2 - - x0 x0 2+2+2+2 2+2+2+2 - - 1/2,1,2 1/2,1 112, 1/2,1 112, 20/2,1 12, 20/2,1 12, 2/2,1 12, 1/ 1/2 1/2 1/2 1/2 1/2 1 1 1 1 1 1 3 22 22 10220 10220 10300 10 3 3 102 1023 1022 1022 1020 1020 1000 0 102 102 103 Note: (1) Nominal cooling and power input are based on: 12/ 0 C entering/leaving evaporator water temperature; 0 C ambient temperature. (2) CN version is the ST one with the sound proof enclosure on the compressors. 302 B - /0 - page /2
Water pressure drop evaporator 100 0 0 0 0 0 2.3-20.3 21.2-230.2 1.2-23.3 11.2 11.2-1.2-200.2 13.2 120.2 20.3-311.3 21.3-21.3 32.3 30. - 0. - 1. 3. - 3. - 3. - 3. 30. -. Pressure drop (kpa) 0 30 20 10 10 20 30 0 0 0 0 0 0100 10 Water flow rate (l/s) 302 B - /0 - page /2
Electrical data ST, CN 120.2. (HCFC 22, HFC 0C) " ST, CN" Unit size 120.2 13.2 1.2 11.2 11.2 Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 2,0 310,0 333,0 3,0 3,0 Max bigger compressors inrush current bsorbed current fans,0 2,,0 2, 20,0 3, 20,0 3, 0,0 3, Max unit absorbed current Max unit inrush current 30, 1, 33, 1, 31, 0,2 3, 13,2 2, 3,2 " ST, CN" Unit size 1.2 200.2 21.2 230.2 23.3 Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 20,0,0 0,0 0,0 11,0 Max bigger compressors inrush current bsorbed current fans 0,0 3, 0,0,0 0,0,0 0,0, 20,0, Max unit absorbed current Max unit inrush current,,2 3,0,0 1,0 100,0 2, 100,0, 3, " ST, CN" Unit size 21.3 21.3 20.3 2.3 20.3 Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 3,0,0,0 30,0 3,0 Max bigger compressors inrush current bsorbed current fans 20,0, 0,0, 0,0, 0,0, 0,0,2 Max unit absorbed current Max unit inrush current 1, 100, 23, 113,, 11,, 1200, 02,2 120, " ST, CN" Unit size 311.3 32.3 3. 3. 3. Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 0,0 0,0,0,0 0,0 Max bigger compressors inrush current bsorbed current fans 0,0,2 0,0, 0,0, 0,0, 0,0, Max unit absorbed current Max unit inrush current,2 1230, 1, 120, 20, 132, 2, 131,, 133, " ST, CN" Unit size 3. 30. 0. 1. 30.. Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 0,0,0 0,0 1,0 0,0 0,0 Max bigger compressors inrush current bsorbed current fans 0,0, 0,0, 0,0, 0,0,0 0,0,0 0,0 11,2 Max unit absorbed current Max unit inrush current 1, 131,3 1, 131,, 1,3 1011,0 1,0 103,0 112,0 10,2 112,0 Note: (1) llowed voltage tolerance ±10%. (2) bsorbed current max condition. 302 B - /0 - page 10/2
Electrical data ST, CN 120.2. (HFC 13) " ST, CN" Unit size 120.2 13.2 1.2 11.2 11.2 Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 12,0 220,0 220,0 220,0 2,0 Max bigger compressors inrush current bsorbed current fans,0 22,,0 22, 20,0 30, 20,0 30, 0,0 30, Max unit absorbed current Max unit inrush current 20,, 22, 0, 20,,2 20,,2 2,,2 " ST, CN" Unit size 1.2 200.2 21.2 230.2 23.3 Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 310,0 310,0 310,0 310,0 330,0 Max bigger compressors inrush current bsorbed current fans 0,0 30, 0,0 3,0 0,0 3,0 0,0, 20,0, Max unit absorbed current Max unit inrush current 30, 20,2 3,0 2,0 3,0 2,0 3, 2,0 3, 0, " ST, CN" Unit size 21.3 21.3 20.3 2.3 20.3 Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 330,0 3,0 20,0,0,0 Max bigger compressors inrush current bsorbed current fans 20,0, 0,0, 0,0, 0,0, 0,0 3,2 Max unit absorbed current Max unit inrush current 3, 0, 20, 1000,, 10, 10, 100, 1,2 10, " ST, CN" Unit size 311.3 32.3 3. 3. 3. Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2),0,0,0 30,0,0 Max bigger compressors inrush current bsorbed current fans 0,0 3,2 0,0 0, 0,0 0, 0,0 0, 0,0 0, Max unit absorbed current Max unit inrush current 1,2 10, 2, 1100,, 112, 0, 110, 3, 121, " ST, CN" Unit size 3. 30. 0. 1. 30.. Standard voltage 00 V - 3f - 0 Hz (1) Max absorbed current compr. (FL) (2) 20,0 20,0 20,0 20,0 20,0 20,0 Max bigger compressors inrush current bsorbed current fans 0,0, 0,0, 0,0, 0,0,0 0,0,0 0,0 1,2 Max unit absorbed current Max unit inrush current,1 12,3, 12,3, 12,3,0 122,0,0 122,0 11,2 122,0 Note: (1) llowed voltage tolerance ±10%. (2) bsorbed current max condition. 302 B - /0 - page 11/2
Sound pressure level ST 120.2. ST Sound pressure level at 1 m from the unit in free field (rif. 2 x 10 - ) Unit size 3 Hz 12 Hz 20 Hz 00 Hz 1000 Hz 2000 Hz 000 Hz 000 Hz db 120.2,,,,,0, 1,0, 2, 13.2,,,,,0, 1,0, 2, 1.2,, 0, 0,,0, 2,0 0, 3, 11.2,, 0, 0,,0, 2,0 0, 3, 11.2,, 0, 0,,0, 2,0 0, 3, 1.2,, 0, 0,,0, 2,0 0, 3, 200.2,, 0, 1, 0,0,0 2,0 0, 3, 21.2,, 0, 1, 0,0,0 2,0 0, 3, 230.2,, 0, 1, 0,0,0 2,0 0, 3, 23.3,, 0, 1, 0,0,0 2,0 0,,0 21.3,, 0, 1, 0,0,0 2,0 0,,0 21.3,, 0, 0,,0, 2,0 0,,0 20.3,, 0, 0,,0, 2,0 0,,0 2.3,, 0, 0,,0, 2,0 0,,0 20.3,, 0, 0,,0, 2,0 0,,0 311.3,, 0, 0,,0, 2,0 0,,0 32.3,, 0, 0,,0, 2,0 0,,0 3.,, 0, 0,,0, 2,0 0, 3, 3.,, 0, 0,,0, 2,0 0, 3, 3.,, 0, 0,,0, 2,0 0, 3, 3.,, 0, 0,,0, 2,0 0, 3, 30.,, 0, 0,,0, 2,0 0, 3, 0.,, 0, 0,,0, 2,0 0, 3, 1.,, 0, 0,,0, 2,0 0, 3, 30.,, 0, 0,,0, 2,0 0, 3,.,, 0, 0,,0, 2,0 0, 3, Note: verage sound pressure level rated in accordance to ISO 3, free field conditions. 302 B - /0 - page 12/2
Sound pressure level CN 120.2. CN Sound pressure level at 1 m from the unit in free field (rif. 2 x 10 - ) Unit size 3 Hz 12 Hz 20 Hz 00 Hz 1000 Hz 2000 Hz 000 Hz 000 Hz db 120.2 3,,,,,0 1,,0,, 13.2 3,,,,,0 1,,0,, 1.2,,,,,0 2,,0, 0, 11.2,,,,,0 2,,0, 0, 11.2,,,,,0 2,,0, 0, 1.2,,,,,0 2,,0, 0, 200.2,,,,,0 3,0,0, 0, 21.2,,,,,0 3,0,0, 0, 230.2,,,,,0 3,0,0, 1,0 23.3,,,,,0 3,0,0, 1,0 21.3,,,,,0 2,,0, 1,0 21.3,,,,,0 2,,0, 1,0 20.3,,,,,0 2,,0, 1,0 2.3,,,,,0 2,,0, 1,0 20.3,,,,,0 2,,0, 1,0 311.3,,,,,0 2,,0, 1,0 32.3,,,,,0 2,,0, 0, 3.,,,,,0 2,,0, 0, 3.,,,,,0 2,,0, 0, 3.,,,,,0 2,,0, 0, 3.,,,,,0 2,,0, 0, 30.,,,,,0 2,,0, 0, 0.,,,,,0 2,,0, 0, 1.,,,,,0 2,,0, 0, 30.,,,,,0 2,,0, 0,.,,,,,0 2,,0, 0, Note: verage sound pressure level rated in accordance to ISO 3, free field conditions. 302 B - /0 - page 13/2
Standard ratings ST,CN 120.2 23.3 (HCFC 22) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size 1,0 31, 12, 12, 3, 0, 132, 13, 32,3 3, 13, 13, 3, 30, 10, 12, 3,1 30, 13,2 1,1 30,3 31,0 1,2 10,1 120.2,3,0 12, 131, 21, 3, 13, 13, 0,3 20,0 10, 12, 32, 0, 1, 1, 32,3 3,2 1,1 1,0 32,1 33, 12,1 13, 2,,2 133, 13,,1 1, 10, 12, 32,, 1, 1, 1,1 2, 1, 10, 0,3 1, 10, 12, 3, 3, 1, 1,,, 10, 13,1 3,2,2 1,3 10, 20,1 33, 12, 1, 0, 1, 1, 1,0 3, 0, 1, 11, 33, 3,1 1, 1,1 13.2, 0, 1,3 1, 3,3, 12, 1,0,1 0, 1,1 1,3 30, 3, 11,2 13, 1,3 32,1 13, 1,0 3, 0, 1,3 11,2 1, 3, 1, 11, 1, 0,3 1,2 1,3,, 11, 13,,1 0, 1, 1,,1, 1,2 10,3 21,1 33, 13, 1, 0, 21, 10, 12, 0,2, 1,2 11,,, 1,2 1,, 2, 1,1 11, 3, 1, 12,3 1, 1, 2, 1, 11,1 1.2 3,,2 1,3 1, 11,3 2,0 13, 1,2, 0, 1, 11,2, 2,1 13, 1,1, 0,0 1,0 1,3 2,3, 13, 1, 0,,0 1, 11, 2,,2 1, 10, 2,1 0,2 13, 1, 0,0 22,0 1, 10,, 0,3 11, 13,, 3, 1, 1, 3, 1,1 1, 11, 2, 1, 1,2 10, 0, 23,1 13, 1,3, 0,3 1, 11,, 1, 12,3 1, 1,,2 1,1 201, 11.2,0 0, 1,2 1,,, 13, 1,1 3,,1 1,0 11, 20,1 3,2 1,2 1, 0, 22, 1, 200,1 0,,1 20,1 20, 2, 2, 1,1 11, 2, 10,1 1, 11,1 2,, 1,1 1, 2,, 1,3 201, 3,, 202, 20,1 10, 2, 20,2 211,,1,3 1, 10,2,, 1,2 10,0 2,3, 12, 1, 10, 2, 1,3 201,1,0 13,3 201, 20, 2,, 20,1 211, 11.2 13, 31, 12, 1, 2,1, 12, 1, 2,, 1, 201,0 2,, 203, 20, 2,0, 20,3 210,0 01, 1, 21,3 21,0,2, 1,2 10, 1,0 3, 1,0 200,, 13, 203, 20,3, 2,2 20,1 211, 1,0, 212, 21,2 32,0, 21, 222,2 00, 1, 1, 1, 0,,1 1,1 1,0 1,, 202,0 20, 32,, 20, 210, 1, 3,1 211, 21, 3,2 0, 21, 222,0 1.2 3,,3 11, 1,3 0, 23, 201, 20,, 02, 20, 210,,1 1, 213, 21,2 1,0,2 21,1 21, 22, 3,2 22,3 22,3 3, 2,2 1,3 200,0 1,3,1 20, 210,1 20,3 3, 213,3 21,0, 1, 21,0 221, 3, 00,2 222, 22,3 3,, 22, 232,,1,2 11,0 1,0 13,3 33,3 201, 20, 2, 11, 20, 210, 1,, 213, 21,,,1 21, 220, 2,0, 22, 22,1 200.2, 10, 1, 1, 3, 3, 20, 210, 31,2 0, 213, 21, 0, 2, 21, 222, 3,1 11, 223, 22, 2,3, 231,3 23,0 31, 3, 202, 20,, 1,1 213, 21,2 0, 0, 21, 222,,,2 22, 22,3 30,2,3 22,2 232,1, 1, 23, 23,,, 1,3 201, 2, 3, 20,3 212, 21,3 1,2 21, 21,, 1, 222,0 22,1, 03,1 22,1 22,1,1 2,3 23,3 23,1 21.2 21,,0 20, 20,, 0, 21, 21, 1, 1, 222,0 22,0 3,, 22,2 231,2 21, 1,0 232,2 23,2, 0, 20,2 23,2,,3 210, 213, 2,0, 221, 22, 02, 23, 22,0 231,0,, 23,2 23,1 0, 0,3 23,2 21,1 2,3,3 2,2 2,1 2,1, 210, 21,1, 10, 222, 22,1,2, 22, 233,1 3, 3, 23, 23, 2,0, 21,0 2,3,0 1,2 2, 23,1 230.2 1,, 21,3 220, 33,0, 22, 232, 0, 30, 23,3 23,,3 0,2 23,1 2,3,, 2, 20, 3,2 3,3 2,3 2, 1,0 1, 223, 22,,1 00, 23, 23, 2,, 22, 2, 2,, 2, 22, 0, 2, 23, 2, 3,0 3,0 22, 2, 00, 2, 23, 22,, 3,2 21, 2, 32,3,2 2, 23,3 0, 2, 2, 20,, 0, 21, 2,3 1, 2, 21,2 2, 23.3 3,3, 2,3 2, 0,2 33, 2, 23,1 0, 0, 2,0 20, 1,, 2,3 2,0 32,, 2,0 22, 3, 1,2 2, 22,1 0,1 32, 23, 2,,, 2, 20,3 2,, 2,3 2,, 23, 21, 2,2, 02, 2,3 2, 3, 0, 2, 2,3 Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. 302 B - /0 - page 1/2
Standard ratings ST, CN 21.3 3. (HCFC 22) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size,, 2,0 20,0 02, 2,3 2, 23,, 00,2 2, 21,,3 0, 2, 2, 2,0 0, 20, 2,, 10, 300, 30, 21.3 0,1 33, 2,0 2,0,1 3,2 2, 21, 2,0 2,1 2, 2,,2 20,3 23, 2,,, 2,3 302,3 32,, 30,1 312,1 2, 1, 21, 2, 10, 3,3 2, 2,, 0, 23, 2,, 1, 301,3 30,2 23,,1 30,2 310,0,3 03, 31,0 31,,3 02, 2, 2, 2,2,2 2, 23,1, 2,3 2,0 21,2,1 3, 2,0 2,1, 3,2 300,1 30,3 10,0 32,0 310,3 31, 21.3 31, 0, 23,1 2,2 1, 0,0 2,3 21, 0,,1 2, 2, 1,, 303,3 30,3, 22,3 30,3 312,,, 31,3 322, 0,2 1.01, 21,2 2,1 3,0,2 2, 2, 0,1 31, 303, 30, 0,, 311, 31,, 3, 31, 320, 01, 2, 32, 330,, 2, 23, 2, 1,3, 2,0 22, 21,,1 2, 300, 1, 1, 30, 30, 1,, 30, 31,2 30, 3, 320, 32, 20.3,1, 22,2 2, 0, 3, 2, 301,0, 01, 30,1 30,3 2,, 313,1 31, 20,, 31,3 322,, 00,0 32, 332, 1.01, 1.0, 20, 2, 3,0 1, 30,2 30,3 2,3,1 313, 31,, 21, 321, 32, 1,3, 32, 330, 2,3, 33, 30, 2,0, 22,2 2,, 03, 2,1 301,, 2,2 30, 310,3 1, 0,1 31,2 31, 3, 1, 31, 32,0 2,2,0 330, 33, 2.3, 1.01, 21,2 2, 31, 0, 30,1 310,,3 2, 31, 31,1,1 2, 323,0 32,3 3,,1 32,3 332,,3 22,3 33, 33,2 1.0,3 1.0,0 2, 30,1, 1.01, 31, 31,2, 3,1 323, 32, 1,, 331, 33,,3 22,0 33, 31,1,1 2, 3,2 31, 0,1 1.022,1 23,3 2, 3,0,3 30,1 313, 0,2 3,2 31, 323,1 3, 01, 32, 332,0 1,, 333,3 33, 0,0 32, 3,1 3, 20.3 1.0, 1.0,0 302, 30,0, 1.02, 31, 323,0,, 32, 332,2 2,,3 33, 31,1 0, 33, 32,3 3,,, 33, 3,2 1.11,3 1.12,2 311, 31, 1.01,0 1.02, 32, 331, 1.02, 1.0,3 33, 31,1, 1.01,0 3, 3, 2,1 1,0 31,2 3, 11, 3,0 32, 3, 1.030, 1.03, 30, 313,, 1.00, 32,2 330,2 3, 3, 33,0 33, 10,3 3, 3, 3,3, 1,1 30, 3, 2,2, 32, 3, 311.3 1.0, 1.130,2 31,3 323,0 1.03,3 1.01,1 33,0 33, 1.003, 1.03, 3, 3,,,2 3,1 3, 3,1 1, 30,1 3, 3, 20, 32,1 3, 1.13, 1.1, 32, 332, 1.103,2 1.13, 3, 3,2 1.0, 1.0,0 3,2 3, 1.02,1 1.0, 33, 3,1 1.000, 1.030, 3, 3,0,2, 31, 3, 1.0, 1.122, 31,3 323,3 1.032,2 1.0,2 33,1 31,2,3 1.030,0 3, 31, 3,,1 3, 31, 0,3, 33,3 3,2 3, 20, 3, 31,2 32.3 1.1, 1.12, 32,2 333,0 1.0, 1.132,1 3,1 31,0 1.02,1 1.0, 3, 31, 1.02, 1.0,1 3, 31,, 1.02, 33,1 3,,, 3,1 30, 1.22, 1.22,3 33, 32, 1.1,1 1.200,3 3, 30, 1.12, 1.10, 3,2 30, 1.0, 1.120,0 3,2 30, 1.00, 1.02,2 32, 3,3 1.00, 1.03, 3, 00,1 1.1,2 1.10, 3, 30, 1.0,2 1.12, 3, 30,0 1.0, 1.01, 3, 31,2 1.021,2 1.03,0 3, 02,2,0 1.02, 03, 0,, 3, 1,2 23, 3. 1.22, 1.23,2 3, 31,0 1.1,2 1.1,0 3, 30, 1.12,2 1.1,0 3, 02,0 1.0,2 1.11, 0, 13,0 1.0,0 1.0, 1, 20,0 1.003, 1.033, 2, 3,0 1.2, 1.33, 3, 31, 1.23,0 1.2,2 3,0 01,2 1.13,2 1.22, 0, 12, 1.11,0 1.1, 1,2 23, 1.122,0 1.1, 2,2 30, 1.0,0 1.0, 3,2, 1.1,2 1.202,0 3,1 3,1 1.10, 1.10, 3, 3, 1.0, 1.102,3 30,3 3, 1.031,0 1.03,1 01, 0,1 1.00, 1.03, 0, 1,, 3,0 23,3 2,0 3. 1.23, 1.2,3 30,2 3, 1.1,3 1.210, 30,1 3, 1.13,0 1.10,1 01, 0, 1.0, 1.12, 12, 1,0 1.0,1 1.100,2 1, 2,1 1.013,1 1.03, 33, 3,3 1.310, 1.3, 31,0 3,0 1.2, 1.21,3 00, 0,1 1.20, 1.23,1 12,3 1, 1.12,0 1.1, 23,3 2, 1.132, 1.1, 30,3 3, 1.0,1 1.10,3,3, 1.1,0 1.21, 33,3 3,0 1.11,1 1.12, 33,3 3,0 1.01,1 1.11, 3, 00, 1.03,1 1.0,2 0,1 11, 1.01, 1.0, 13, 1,1,0, 2,0 33, 3. 1.21,2 1.2, 3, 3, 1.1, 1.223,0 3, 00,0 1.1,3 1.12, 0,2 11, 1.10, 1.10, 1,3 22, 1.00,0 1.112,1 2, 2, 1.02, 1.0,1 3,,3 1.323,0 1.3, 3, 30, 1.2,3 1.23, 0, 10, 1.21, 1.21, 1,0 22,3 1.1,0 1.20, 2,1 33, 1.1, 1.1, 3,2 0, 1.0, 1.11,,, Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. 302 B - /0 - page 1/2
Standard ratings ST,CN 3.. (HCFC 22) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size 1.201, 1.23, 31, 3, 1.11,0 1.1,2 32,2 3,0 1.103, 1.13, 0,0 0, 1.0,0 1.0, 1, 21,2 1.03, 1.00,2 23,0 2,, 1.01, 3,,0 3. 1.2, 1.312, 33,2 3, 1.211, 1.2,0 03, 0,2 1.11, 1.20, 1, 21,2 1.130,2 1.13, 2,0 32, 1.102,0 1.13, 3,2 3, 1.0, 1.0,,, 1.3, 1.3, 3, 00,0 1.22, 1.31,2 1, 20,2 1.20, 1.2, 2, 32,0 1.1,0 1.231,0 3,0 3, 1.1,2 1.200,,2 0, 1.10, 1.13,2,,0 1.2, 1.2, 3, 31, 1.10,3 1.22,2 3, 02, 1.10, 1.1,1 0, 1, 1.110,1 1.1,0 20,3 2,2 1.02, 1.11, 2,0 33, 1.02, 1.0,2 3,,0 30. 1.33,1 1.3, 3,3 32, 1.2, 1.30,1 0,2 1,0 1.22,0 1.21, 20, 2,0 1.10, 1.21, 32,0 3, 1.10, 1.1, 3,,2 1.01, 1.12,, 0,2 1.1,0 1., 3, 0,1 1.3,0 1.33,2 1, 2,1 1.2,2 1.33,2 31, 3,3 1.23,1 1.20,0 3,3, 1.221, 1.2, 0,,3 1.1,3 1.13,1, 1,3 1.2, 1.31,0 3,2 30,2 1.213,2 1.21, 0, 11, 1.13,1 1.20, 1, 23, 1.132,0 1.1,2 2, 3, 1.10,1 1.13,2 3, 3, 1.0,3 1.00,2 3,2,1 0. 1.3, 1.00,3 3,0 01, 1.20,2 1.32,1 1, 23,2 1.2,1 1.2, 2, 3, 1.203,0 1.23,3 1,, 1.12, 1.20,2,3,1 1.112, 1.1,0, 0, 1.3, 1.0, 0, 13, 1.3,3 1.0, 2,0 3, 1.322, 1.31,2 1,3,0 1.2,1 1.313,3 3,2, 1.2,1 1.20, 0,, 1.10,1 1.21,,0 1, 1.3,2 1.3,2 3, 02, 1.2, 1.32, 1, 2, 1.22, 1.22, 31, 3, 1.1,0 1.23,0,0 0,2 1.1, 1.20,2 2,2,2 1.110,2 1.1,,,2 1. 1.3, 1.,0 0, 1, 1.3, 1.11,2 31,0 3,2 1.322, 1.33,,0 0,0 1.2, 1.31,2, 2, 1.23, 1.22,0, 0, 1.1, 1.21, 0,, 1.31, 1., 21,2 2, 1.,0 1.,2 3,2,0 1.0,2 1.,0,0 2,0 1.3,2 1.3,,,2 1.321,0 1.30,, 2,2 1.22, 1.20, 2,,2 1.33, 1.3, 12,0 1, 1.322, 1.3, 3, 1, 1.2, 1.31,2,1, 1.23,0 1.22, 1,2, 1.203, 1.21,1,, 1.13,1 1.1,, 2, 3. 1.3, 1.2,1 2, 31,1 1.0, 1.0,,,2 1.30,3 1.01, 1,2, 1.312,1 1.32,1,0 0,2 1.2,3 1.31,1 2,3, 1.213, 1.20,1, 0,1 1.2, 1.1, 3, 3, 1.,0 1.3, 0,, 1.,0 1., 3,, 1.32, 1.33,, 2, 1.3, 1.3,0, 00, 1.2, 1.32,2 11,1 1,1 1.0,2 1., 21, 2,2 1.3,2 1.21,, 2,2 1.332, 1.3,0,,2 1.2,0 1.32, 3,2, 1.2,0 1.2,2 2,0, 1.1,0 1.230,, 0,2. 1.3, 1.0, 3, 1,0 1.,0 1.10,,,2 1.1, 1.1,2 2,,2 1.3, 1.10,,2 2, 1.33,2 1.3,,0 01, 1.2, 1.30, 12, 1,0 1.3,0 1.3,, 3, 1.,2 1.01, 1,, 1.0,2 1.,, 1, 1.2, 1.,,0 0,2 1.1,2 1.,2 0, 13, 1.3,0 1.3,0 2, 31,0 Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. 302 B - /0 - page 1/2
Standard ratings ST, CN 120.2 23.3 (HFC 0C) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size * * 0, 1, 12, 12, 3,0 3, 132, 13, 30, 32, 13, 13, 3, 3,0 10, 12, 33, 30,2 1, 1, 330, 30, 1,3 10,2 120.2 31,,2 12, 131, 0,1 21, 13, 13, 3,1 0, 10, 12, 30, 32, 1, 1, 31,3 32, 1, 11, 31, 32, 12,2 13,, 1, 133, 13, 3,, 10, 12, 1, 32, 1, 1, 0, 1, 1, 10, 33, 3, 13,3 1,2 33, 3,1 1, 1, * *,0 0, 10, 13,1 22,1 3, 1,3 10, 0, 20, 12, 1, 32, 0,0 1, 1,0 32, 3,3 12,2 1, 32, 3,0 1,0 1,2 13.2,,3 1,3 1,, 3,2 12, 1,0 33,,0 1,1 1,3 1, 30, 11,2 13, 3,1 0,2 1, 1, 3, 3,1 1, 11,3 03, 1, 1, 11,,0 1,1 1,2 1,3 0,,0 11, 13, 3,, 1, 1, 20, 33,0 10, 12, 0, 21,3 13, 1, * * 0, 0,2 10, 12,, 0, 1,2 11, 0,,0 1,2 1, 3,0, 1,1 11, 1,2 2,3 1, 1,0 03, 1, 1, 11,2 1.2 21, 3, 1,3 1,,0 11,2 13, 1,2,, 1, 11,2 3,1,3 13, 1,1 0,,2 10,3 12, 2, 2, 13, 1, 3,, 1, 11, 2,1 1, 1, 10, 0,3 2,0 13, 1, 1, 0,3 1, 10,,0 2,0 1, 1,,1, 1, 10,0 * * 3,,0 1, 11, 0, 2,3 1,2 10, 1, 0, 13, 1,3,1,2 1, 11, 0,, 1, 1,3 3, 2, 1,2 201, 11.2 1,3, 1,2 1, 1,,3 13, 1,1 23, 3, 1,0 11, 0, 20,1 1,2 1,,2 3, 200, 203,, 0, 20,2 20,0 0,0 23,3 1,1 11,,0 1, 1, 11,1, 2,1 1,1 1, 3, 1, 1,3 201, 0,0 2,3 20,0 20,, 10, 20,3 211, * *,, 1, 10,2 31,2, 1,2 10,0 13, 2, 12, 1,,3 10, 1,3 201,1 1,1, 20, 20,,1 2, 20,2 212,0 11.2,0 12, 12, 1,, 1, 12, 1,, 2,1 1, 201,0 2,3 2,1 203, 20, 00,3 1,3 210, 213,,2 01, 21, 21,1 2,, 1,2 10,, 1, 1,0 200,,,3 203, 20,3,2, 20,1 211, 30,,1 21,2 21, 1, 31, 21, 222,3 * * 2, 00, 1, 1, 3, 0, 1,1 1,0 3,2 1, 202,0 20, 1, 32,2 20, 210, 1, 0,2 21,3 21,3, 3,2 21,0 222,1 1.2 1, 3, 11, 1,3, 0, 201, 20,,1, 20, 210,,1,2 213, 21,2 21,1 3, 220, 223, 0, 22, 22, 22, 3, 1, 1,3 200,0 22,1 3,3 20, 210,1 01, 1, 213,3 21,0 0,,0 21,0 221, 2,0, 22,3 22,0 3, 3,1 22, 232, * * 2,,2 11,0 1,0, 1,3 201, 20,, 3, 20, 210,, 2,2 213, 21, 2,2 3, 221, 22, 13, 2, 22, 22,2 200.2,, 1, 1, 33, 3, 20, 210, 12,3 31, 213, 21, 0,2 0, 21, 222, 0,,1 22, 230,3,0 2, 231, 23,1 0, 30, 202, 20, 3, 3, 213, 21,2 0, 0,2 21, 222, 2,2,2 22, 22,3, 13, 233,1 23,0 0,1, 23, 23, * *,3, 1,3 201, 23, 3, 20,3 212, 02, 22,0 21, 21, 1,, 222,0 22,1 3,2 0, 230,3 233,2 3,0, 23, 23,2 21.2 00,0 21, 20, 20, 3,, 21, 21, 1, 1, 222,0 22,0 1, 3, 22,2 231,2,1 0,1 23,3 23,3 2, 0,2 20,3 23,3 2,, 210, 213, 0,2 2,1 221, 22, 1, 01, 22,0 231,0,3, 23,2 23,1 2, 3,3 22,3 2,2 0,1 2, 2,3 2,2 * * 03,3 2, 210, 21,1,, 222, 22,1,2, 22, 233,1 2,2 3, 23, 23,, 12, 2, 2,,,3 2, 23,2 230.2, 1, 21,3 220, 11,0 32, 22, 232,, 0, 23,3 23, 3,,0 23,1 2,3 31, 0, 22,0 2,2 1, 3,3 2, 2, 3, 1, 223, 22,,, 23, 23, 30,0 1, 22, 2, 0, 2, 2, 22, 0, 0, 2,2 21,3 3, 2, 22, 2, * *, 03,0 23, 22, 3,, 21, 2, 10,3 33, 2, 23,3, 0, 2, 20, 0,1 0, 2, 20,1 32, 3,0 21,3 2, 23.3 2, 3,2 2,3 2,,0 0, 2, 23,1,0 0, 2,0 20, 2,3 2,2 2,3 2,0 2,2 13, 23, 2, 3,, 2, 22,2, 0, 23, 2, 33,1,0 2, 20,3 0, 2, 2,3 2,,, 21, 2,2 3,0, 21,1 2, 1,2 3, 2, 2, Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. (*) 10% glycol must be added. 302 B - /0 - page 1/2
Standard ratings ST,CN 21.3 3. (HFC 0C) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size * * 23,3 0, 2,0 20,0, 0, 2, 23, 1,,2 2, 21, 23,, 2, 2,,0 0,1 2, 2,,, 300, 30, 21.3, 0, 2,0 2,0 30,, 2, 21, 01,2 2, 2, 2, 1,3, 23, 2, 31,, 303,3 30,3 11, 33, 30,2 312,2 33, 1, 21, 2, 3,3 10,2 2, 2, 2,2,3 23, 2, 20,, 301,3 30,2,0 02,1 311,2 31,, 0,3 31,1 31, * *,1, 2, 2, 02, 2, 2, 23,1,, 2,0 21,2,0 0,0 2,0 2,1 0,3 30, 30,3 30,, 10, 310, 31, 21.3 03, 32,1 23,1 2,2,0 1, 2,3 21, 2,0 0, 2, 2,,3 1,2 303,3 30,3 3,, 313, 31, 32,, 31, 322, 0,,2 21,2 2,1 0, 3,2 2, 2,,0 03, 303, 30,, 0,0 311, 31, 00, 2,2 321, 32,, 02, 32, 330, * * 2, 00, 23, 2, 2, 2, 2,0 22,,1 22, 2, 300,,0 2,3 30, 30, 2,2 1, 31,3 31, 0, 31, 320, 32, 20.3 2,,2 22,2 2,,3 0, 2, 301,0,, 30,1 30,3 1,1 2,3 313,1 31,,0, 323, 32, 3,, 32, 332,,1 1.01,3 20, 2, 3,1 2,0 30,2 30,3 01, 2, 313, 31,,0,0 321, 32, 23,0, 331, 33, 00, 2, 33, 31,0 * *,3 2,2 22,2 2,,3, 2,1 301, 20,0,0 30, 310,3 0,2 1, 31,2 31,, 0, 32,3 32,,2,1 330, 33, 2.3,2, 21,2 2, 03, 31, 30,1 310, 2,3,1 31, 31,1 0,1, 323,0 32,3 1, 3,0 333, 33,0 01, 2, 33,0 33,3 1.013, 1.03, 2, 30,1,,0 31, 31,2 2,2 3, 323, 32, 1, 1,3 331, 33,,3 0,2 32,1 3, 0,,1 3,3 31, * * 0, 1, 23,3 2, 0, 3,3 30,1 313,,0 0,1 31, 323,1,, 32, 332,0 0, 30, 33,3 33,, 0, 3,3 3, 20.3 1.022, 1.0, 302, 30,0,, 31, 323,0 3,, 32, 332,2 01, 2, 33, 31,1,3 2, 3,1 32, 33,, 33, 3,3 1.0, 1.11, 311, 31, 1.02,2 1.0, 32, 331,,0 1.023, 33, 31,1,, 3, 3, 0,3 3, 3,0 31,2,1 11, 32, 3, * *, 1.031, 30, 313,,, 32,2 330,2 1,, 33,0 33, 3,0 10, 3, 3,3 3,,2 3, 31, 1, 2, 33,0 3, 311.3 1.03, 1.0,3 31,3 323,0 1.00,1 1.03,0 33,0 33, 3, 1.003, 3, 3, 3,,3 3,1 3, 1, 1, 3,2 30,,0,0 32,3 3,0 1.12,0 1.10, 32, 332, 1.00,1 1.101, 3, 3,2 1.033, 1.0,1 3,2 3,,3 1.02, 33, 3,1,,2 3, 30,0 20,, 31, 3, * * 1.0, 1.0, 31,3 323,3 1.001,2 1.033,2 33,1 31,2,,1 3, 31, 3,,3 3, 31,, 1,3 30,0 3,, 3, 3, 31, 32.3 1.122, 1.1,0 32,2 333,0 1.0, 1.0,1 3,1 31,0 1.030,2 1.01, 3, 31,,1 1.02, 3, 31,,,2 3, 3, 21,3,1 3,3 31,1 1.11,1 1.22, 33, 32, 1.131,1 1.1,3 3, 30, 1.03, 1.12, 3,2 30, 1.0,2 1.0, 3,2 30, 1.003, 1.033,1 3,1 33,, 1.00, 3, 00,3 * * 1.11, 1.1, 3, 30, 1.02,3 1.0, 3, 30,0 1.02, 1.0,0 3, 31,2 0, 1.021, 3, 02,2 2,3 0, 11,1 1, 1,1, 1, 2,0 3. 1.10,0 1.22,3 3, 31,0 1.12,3 1.13,0 3, 30, 1.01, 1.12,2 3, 02,0 1.02, 1.0,3 0, 13,0 1.000, 1.030, 21, 2,1, 1.003, 2, 3,2 1.2, 1.2, 3, 31, 1.1,0 1.231,1 3,0 01,2 1.1, 1.10, 0, 12, 1.11, 1.1, 1,2 23, 1.00, 1.02,2 32,3 3, 1.033,1 1.03, 3,, * * 1.130,2 1.23,2 3,1 3,1 1.02, 1.1, 3, 3, 1.03, 1.13, 30,3 3, 1.000,1 1.0,0 01, 0,1,3 1.0, 0, 1, 3,0 2, 00,0 0, 3. 1.2, 1.31, 30,2 3, 1.211, 1.2, 30,1 3, 1.11,1 1.20,3 01, 0, 1.12, 1.13, 12, 1,0 1.101,1 1.13,2 1, 2,1 1.022, 1.03, 10, 1, 1.31,3 1.3,3 31,0 3,0 1.2,3 1.320, 00, 0,1 1.21, 1.2, 12,3 1, 1.1, 1.232, 23,3 2, 1.1, 1.202,0 30,3 3, 1.0, 1.11, 20, 2,0 * * 1.12, 1.1,3 33,3 3,0 1.0, 1.11,3 33,3 3,0 1.0, 1.01,2 3, 00, 1.011, 1.02, 0,1 11, 2, 1, 20, 2, 3,, 2,2 3,1 3. 1.213, 1.2,3 3, 3, 1.12,3 1.1,3 3, 00,0 1.113, 1.1, 0,2 11, 1.0, 1.10, 1,3 22, 1.021, 1.01, 31, 3,2, 1.02, 3,, 1.23,3 1.31, 3, 30, 1.220, 1.2, 0, 10, 1.10, 1.213, 1,0 22,3 1.13, 1.11, 2,1 33, 1.02, 1.113, 2,, 1.0,3 1.0,0,, Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. (*) 10% glycol must be added. 302 B - /0 - page 1/2
Standard ratings ST, CN 3.. (HFC 0C) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size * * 1.1, 1.201, 31, 3, 1.10, 1.10, 32,2 3,0 1.00, 1.103,3 0,0 0, 1.033,1 1.0, 1, 21,2 2, 1.012, 30, 3,,,3 3,0,2 3. 1.23,3 1.23,2 33,2 3, 1.1,3 1.20, 03, 0,2 1.13,3 1.1, 1, 21,2 1.0,3 1.12, 2,0 32, 1.02,3 1.02, 1,,3 1.01,3 1.0,2,, 1.30,2 1.32, 3, 00,0 1.2,1 1.2, 1, 20,2 1.203, 1.23,1 2, 32,0 1.11,1 1.1,1 3,0 3, 1.10,0 1.13, 2,, 1.0, 1.10,1,,2 * * 1.21,1 1.2,1 3, 31, 1.1, 1.11, 3, 02, 1.11,1 1.11, 0, 1, 1.0, 1.110, 20,3 2,2 1.02,3 1.0, 3, 1,,0 1.02, 3,,2 30. 1.2,0 1.33,3 3,3 32, 1.22, 1.2, 0,2 1,0 1.1,3 1.223, 20, 2,0 1.1,1 1.10,0 32,0 3, 1.0, 1.121,,1 2, 1.00,0 1.02,1, 0, 1.32, 1.12,0 3, 0,1 1.303, 1.31, 1, 2,1 1.20,2 1.2,1 31, 3,3 1.21, 1.21,3 3,3, 1.1,0 1.1,, 3, 1.12, 1.1,,0 1, * * 1.20,1 1.2, 3,2 30,2 1.1, 1.21,0 0, 11, 1.13, 1.13, 1, 23, 1.0,0 1.132,2 2, 3, 1.0, 1.0,, 1, 1.01, 1.0, 3,,3 0. 1.31, 1.3,3 3,0 01, 1.21, 1.2,2 1, 23,2 1.20, 1.2,3 2, 3, 1.1, 1.202,1 1,, 1.10,2 1.12,,0 2, 1.00, 1.112,, 0, 1.3, 1.3,1 0, 13, 1.32,3 1.3, 2,0 3, 1.23,2 1.320, 1,3,0 1.23, 1.23, 3,2, 1.1, 1.211,1,,1 1.1, 1.1,,2 1, * * 1.31, 1.3,2 3, 02, 1.2, 1.2,0 1, 2, 1.20,3 1.23, 31, 3, 1.13,0 1.1,,0 0,2 1.10,3 1.10, 0,,3 1.0,0 1.111,,, 1. 1.00,1 1.3, 0, 1, 1.32, 1.3, 31,0 3,2 1.23,1 1.322,,0 0,0 1.23, 1.2,, 2, 1.1,2 1.212,1 2,, 1.1, 1.10, 0,, 1., 1.2,3 21,2 2, 1.10, 1.2,3 3,2,0 1.33,0 1.03,,0 2,0 1.31, 1.33,,,2 1.2,0 1.2,, 0,3 1.21,3 1.23,2 2,, * * 1.32,1 1.3, 12,0 1, 1.22, 1.323, 3, 1, 1.20,2 1.2,,1, 1.1,0 1.23, 1,2, 1.13, 1.1,0,,3 1.10, 1.13,, 2, 3. 1.3,2 1.3,2 2, 31,1 1.3,2 1.0,0,,2 1.31, 1.3, 1,2, 1.22, 1.311,,0 0,2 1.20, 1.2, 0,, 1.1, 1.213,,1 0,3 1.2, 1.0,0 3, 3, 1.,2 1.1, 0,, 1.00, 1.1, 3,, 1.30, 1.30,, 2, 1.23, 1.322,1 03,0 0,0 1.20,3 1.2, 11,3 1,3 * * 1.0, 1.1, 21, 2,2 1.33, 1.3,, 2,2 1.22, 1.333,,,2 1.2, 1.2, 3,2, 1.1,0 1.22, 1,0, 1.1,3 1.1,, 0,. 1., 1.3,1 3, 1,0 1.22,0 1.,,,2 1.3,3 1.1, 2,,2 1.32, 1.3,1,2 2, 1.23, 1.301, 0,0 10, 1.231, 1.2, 12, 1,2 1., 1.33,1, 3, 1.0, 1.3, 1,, 1.0,0 1.03,1, 1, 1.0,2 1.0,,0 0,2 1.31,0 1.30, 1,3 22, 1.30, 1.3, 2,0 31,2 Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. (*) 10% glycol must be added. 302 B - /0 - page 1/2
Standard ratings ST,CN 120.2 23.3 (HFC 13a) MBIENT TEMPERTURE - 0 C 3 0 3 2 ST, CN Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power Cooling Power unit size 2, 23,,0,2 21, 2, 2,1 3, 23,3 21,0,, 23,0 22,,1, 22, 23,, 0,0 21, 22, 2,1 3, 120.2 22,2 20, 0, 1, 2, 2,,, 2, 2,,1,3 2, 2,3, 0, 2,1 21,2 1,3 2, 232,3 23,1,, 2,2 30,2 2,,1 23, 21,,0,1 2,3 22,, 0, 2, 23,2 2,0 3,0 2, 2,0 3,, 2,2 2,,1, 22, 301,,, 2,1 2, 1,2 2, 2,0 2, 3,,3 2, 2,1,,1 22, 20,,, 20, 2,2 102,3 103, 13.2 310, 320,1,3 0, 2, 303, 3,,2 2, 23,,,0 2,3 23,, 100, 2, 2, 101,3 102, 2, 23,3 10,0 10, 32, 33, 1, 3,3 312, 321,3,, 302,1 311,1, 100, 21, 300, 102,2 103,2 2, 2,1 10,0 10,0 21,2 20, 10, 10, 31, 32, 3,0, 303,0 312,,0, 23,0 302,3 101,0 102, 23,0 22,0 10,0 10, 2, 2,1 10, 10, 23,1 21, 10, 111, 1.2 33, 30,0,,3 322,2 331, 100, 102, 311, 320, 103, 10, 301,0 30, 10, 10, 23, 302, 10, 110, 2, 2, 112, 11, 30,3 30,0, 100,3 31, 31,3 103, 10,1 330,3 30,1 10, 10,1 31,0 32,0 10, 111,0 311, 321, 111, 112, 2, 30, 11, 11, 331, 31, 10, 10,1 31,2 32,1 110,0 111, 303, 313, 113, 11,0 23, 302, 11, 11,3 2, 2, 11, 120, 22, 21, 123, 12,0 11.2 32, 33,0 10, 10,3 33,0 3,0 113,3 11, 323,1 332, 11, 11,3 312,1 321,3 120,0 121, 30, 313, 122,2 123, 20,1 2, 12, 12, 33, 33, 110, 112, 3,1 3,3 11, 11,0 32, 32, 11, 121,3 330, 31,1 123,3 12, 323,0 333, 12, 12, 30, 31, 130,0 131,1 30, 32, 10, 10, 31, 32, 113, 11,3 33, 30, 11,0 11, 32,2 33, 120, 122,2 320, 330, 122, 12, 30,1 31, 12, 12,1 11.2 3,1 0, 111,2 112, 33, 3, 11, 11, 31,3 32,1 120, 122,1 3,0 3,3 123, 12, 30, 30, 12,2 12, 32, 333, 130, 132, 1, 2,1 11, 11,3 3,1 0, 120,3 121, 33,0 3, 123, 12,2 30,0 31, 12,3 12, 31,2 32, 12, 130, 33, 3, 13,2 13,3 3, 0, 11,1 11, 33, 3, 122,3 12,1 31, 33,0 12,0 12, 3,3 30,3 12, 131, 31,1 31, 132,2 13,0 32, 33, 13,2 13,0 1.2 1, 32,0 11, 121, 3, 0, 12, 12, 3, 3, 12, 131, 31, 32, 133, 13,2 32, 33, 13, 13, 3,2 3,3 10, 12,,, 123,2 12,2 21, 33, 12, 131,2 0, 1, 133,3 13, 33, 0,0 13,0 13, 3, 3, 13, 10, 3, 3, 1, 1, 21, 3,2 12, 12, 3, 12, 131, 133,3 3, 3,0 13, 13,3 33, 3, 13, 11,3 3, 3,3 12,0 1,0 3,2 3,2 1, 1,3 200.2, 2,0 12, 130, 2,2 3, 13,3 13,2 11,2 23, 13,3 11,3 3,2 0,0 13,3 1,3 3, 3,3 1, 1,0 3,2 30,0 11,3 13,,,3 132, 13, 0, 3, 13,1 11,0 3,, 13,2 1, 21,0 3,2 1,2 1, 11,1 2, 1, 11, 31,3 0, 1,3 1,,3 3, 133, 13, 2, 3, 10, 12, 11, 2, 1, 1, 3, 10, 1,1 11,2 3, 00, 11, 1,0 3, 31, 1, 1, 21.2, 2,1 13, 13, 2,, 1, 1, 3,0 1,0 1,0 11,1 23,1 3, 13,3 1, 13,1 2,3 1,1 1,3 33,3 0, 11, 1,1 0, 20,1 11, 13, 0,1 3, 1, 10,,3,2 13,1 1,0, 2, 1, 1,1 3, 2,0 10,3 11, 1, 31,0 1,1 1,, 10,2 130,0 132,1, 3, 13,0 13,0 3,, 11,1 13,2 3, 1, 1,3 1, 2, 1,2 1,1 10,1 0,0 1, 13, 1, 230.2 2, 1, 13,1 13,1, 13,3 11,0 13,1 2,0, 1,2 1,3,, 1, 11,,,1 12,2 1,3 32,, 1, 1,, 2, 13,0 10,2 2, 3, 1,1 1,0 11,0 2,3 1,3 11,0 3, 0,0 13, 1,1 1,, 1,3 1,,, 11, 13,2 3,1 0, 12, 1,1, 2,2 10, 12, 2,0,3 1,0 1,3 3, 0, 1, 11, 2, 3, 12, 1, 0, 1, 1, 11,0 23.3 2,2 0,0 1,3 1,,0 11, 1, 1,2 0,, 1, 11,,3,0 1,1 1, 3,, 1,1 1, 31,,2 13,3 1,, 0, 11, 1,0 2, 2,0 1,3 11, 0, 2, 1,0 1, 2,1 0, 1, 10, 0,,0 11, 13,, 3,0 1, 1,3 Leaving chilled water temp.- 0 C Notes: (1) Ratings based on: evaporator fouling factor of 0,0 m2 C/, evaporator temperature drop of C and sea level altitude. (2) Interpolation is allowed, extrapolation is not permitted. Please contact McQuay for performance outside the standard ratings. (3) The power input is for compressors only. 302 B - /0 - page 20/2