2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity 20 Park Street Princes Risborough Buckinghamshire HP27 9AH Contact: Ian Woodhouse Tel: +44 (0)1844 275500 Fax: +44 (0)1844 274002 E-Mail: Ian.Woodhouse@ifcgroup.com Website: www.ifc.com Locations where activities covered by the above Accreditation Standard are undertaken 20 Park Street Princes Risborough Buckinghamshire HP27 9AH United Kingdom Assessment Manager: CM2 Page 1 of 8
DETAIL OF ACCREDITATION Product Timber fire doors and door sets intumescent seals, smoke seals air transfer grills Standard SDP 01 - BS 476:22 or BS EN 1634-1 or BS ISO 3008 Or EN 16034:2014 SDP 20- BS 476:22 or BS EN 1634-1 or BS ISO 3008 SDP 22 BS 476:31 or BS EN 1634-3 or BS ISO 5925 SDP 32 BS 476:22 or BS EN 1634-1 Metal fire doorsets SDP 02 - BS 476:22 or BS EN 1634:1 or BS ISO 3008 Or EN 16034:2014 Smoke barriers SDP 07- BS EN 12101-1:2005 or BS7346-3 Controlled door closing devices SDP 08- BS EN 1154:1997 or BS EN 1155 or BS EN 13501-2 Fire Resisting Glass for use in Partitions, Curtain Walling and Internal Glazed Screens SDP 09 BS 476:22 or BS EN 1364-1 or BS ISO 3009 Single axis hinges SDP 10 EN 1935:2002 Retractable fire resistant fabric curtains SDP 11/1 BS 476:22 or BS EN 1634-1 or BS EN 1364 or BS ISO 3008 Active fire curtain barrier assemblies SDP 11/2-BS8524-1 Thin Film intumescent coatings for the protection of structural steel SDP 12- BS476:21 or BS EN 13381-8 Penetration seals SDP13 - BS 476:21 & 22 or BS EN 1366-3 or BS ISO 10295-1 Linear gap seals SDP 14 BS EN 1364-3 or BS EN 1364-4 or BS EN 1366-4 Assessment Manager: CM2 Page 2 of 8
Product Standard Panic exit devices operated by horizontal bar SDP 16 EN 1125:2008 Emergency exit devices operated by handle or push pad SDP 17 EN 179:2008 Mechanically operated locks SDP 18 EN 12209:2003 Electrically poweredhold open devicesfor swing doors SDP 19 EN 1155:1997 Fire resisting partitions and internal glazed screens SDP 21 BS 476:22 or BS EN 1364-1 or BS ISO 3009 Fire resisting duct systems SDP 26/1-Testing to BS 476 methods (BS 476:24) Fire resisting duct systems SDP 26/2-Testing to EN methods BS EN 1366-1 or BS EN 13501 Smoke control duct sections SDP26/3 BS EN 12101-7 Testing to BS EN 1366-8 or BS 1366-9 Fire safe modular buildings SDP 27 BS EN 476:21 & 22 or BS EN 1364 / 1365 Fire resisting dampers SDP 28/1 BS EN 1366-2 or ISO 10294-1 or ISO 10294-5 or EN 1366-12 Smoke control dampers SDP 28/2-BS EN 1366-10 Rendering (spray) for the protection of structural steel SDP 29 BS 476:21 or BS EN 13381-4 Boards for the protection of structural steel SDP 30 BS 476:21 or BS EN 13381-4 Installation of sprayed thin film intumescent coatings for the protection of structural steel SDI 06 Assessment Manager: CM2 Page 3 of 8
Product Standard Installation of boards and insulated panel systems used for the construction of various types of buildings SDI 08 Installation of penetration sealing and fire stopping in walls, floors, partitions and sandwich panels SDI 09 Installation of fire resistant cavity barriers SDI 10 Installation of non-metallic timber fire resistant doorsets SDI 14 Installation of metallic fire resisting doorsets SDI 15 Installation of residential and domestic sprinkler systems SDI 22 Installation of industrial and commercial sprinkler systems SDI 23 Maintenance of sprinkler systems SDI 24 Internal and external wall and ceiling finishes, internal partition kits ETAG 003 Fire stopping, fire sealing and fire protective products. Fire retardant products. ETAG 018 Parts 1, 2, 3 and 4 ETAG 026 Parts 1, 2, 3, 4 and 5 Smoke Barriers Natural smoke and heat exhaust ventilators Powered smoke and heat ventilators Smoke duct sections Smoke control Dampers Power Supplies BS EN 12101-1:2006 BS EN 12101-2:2003 BS EN 12101-3 BS EN 12101-7 BS EN 12101-8 BS EN 12101-10 Assessment Manager: CM2 Page 4 of 8
Product Standard Reaction to fire of board materials BS EN 12467 Fire dampers BS EN 15650 Suspended ceilings BS EN 13964 Internal pedestrian doors BS EN 14351-2 Ancillary components for masonry - lintels BS EN 845-2:2003 Glass in building BS EN 1096-4:2004 BS EN 12150-2:2004 BS EN 12337-2:2004 BS EN 1279-5:2005+A2:2010 BS EN 13024-2:2004 BS EN 14178-2:2004 BS EN 14179-2:2005 BS EN 14321-2:2005 BS EN 14449:2005 BS EN 1748-1-2:2004 BS EN 1748-2-2:2004 BS EN 1863-2:2004 BS EN 572-9:2004 BS EN 1051-2:2007 Fire Risk Assessor Certification Scheme IFCC 0099 and IFC Operational Procedure OP8 Enhanced security performance hinged external door and door assemblies including door furniture and glazing IFCC SDSec 00 and SDSec 01 Secure by design scheme incorporating BS6375 parts, 1, 2 and 3, BS EN1627, BS EN1628, BS EN1629, BS EN1630 and PAS 24 - Ref. END Assessment Manager: CM2 Page 5 of 8
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011, 96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) EN 12101-1: 2006EN 12101-1:2005/A1:2006 EN 12101-2:2003 EN 12101-3:2002 EN 12101-7:2011 EN 12101-8:2011 EN 12101-10:2005 EN 15650:2010, 99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) EN 179:2008 EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1935:2002 EN 1935:2002/AC:2003 EN 12209:2003 EN 12209:2003/AC:2005 EN 14351-1:2006+A1:2010 2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : EN 572-9:2004 EN 1096-4:2004 EN 1279-5:2005+A2:2010 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 Assessment Manager: CM2 Page 6 of 8
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont d) 2000/245/EC Flat glass, profiled glass and glass-block products (4/6) EN 1051-2:2007 2000/245/EC Flat glass, profiled glass and glass-block products (4/6) EN 572-9:2004 EN 1051-2:2007 EN 1096-4:2004 EN 1279-5:2005+A2:2010 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 98/213/EC Internal partition kits (1/5) ETAG 003 EN 13964:2014 99/454/EC Fire stopping, fire sealing and fire protective products (1/2) ETAG 018-1 ETAG 018-2 ETAG 018-3 ETAG 018-4 ETAG 018 4 Amendment EN 12467:2012 Assessment Manager: CM2 Page 7 of 8
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont d) 99/454/EC Fire stopping, fire sealing and fire protective products (2/2) ETAG 026-1 ETAG 026-2 Version 08/2011 ETAG 026-3 Version 08/2011 ETAG 026-5 2015/C 226/04 Pedestrian doorsets, industrial, commercial, garage doors and openable windows EN 16034:2014 Product standard, performance characteristics Fire resisting and/or smoke control characteristics As a Technical Assessment Body (TAB) for developing European Assessment Documents Annex IV Product Areas 2. Doors, windows, shutters, gates and related building hardware 21. Internal partitioning Kits 30. Flat glass, profiled glass and glass block products 35. Fire stopping, fire sealing and fire protective products, Fire retardant products. END Assessment Manager: CM2 Page 8 of 8