TOO HOT TOO COLD JUST RIGHT. HVAC PRODUT CATALOG 2017
TABLE OF CONTENTS MAYTAG RG1 80% AFUE Gas Furnace... Page 1 MAYTAG RG7 95% AFUE Gas Furnace... Page 3 MAYTAG RE9 Electric Furnace... Page5 MAYTAG RE9X Electric Furnace... Page 7 MAYTAG M5 Oil Furnace... Page 9 MAYTAG 14 SEER Split System AC - QC... Page 11 MAYTAG 14 SEER Split System HP - QC... Page 13 MAYTAG 13 SEER Split System AC - QC... Page 15 MAYTAG 14 SEER Split System AC - SF... Page 17 MAYTAG 14 SEER Split System HP - SF... Page 19 MAYTAG 13 SEER Split System AC - SF... Page 21 MAYTAG Packaged AC... Page 23 MAYTAG Packaged HP... Page 25 REVOLV VMA/VMC 95% AFUE Gas Furnace... Page 27 REVOLV R410A AccuCharge M Series Coils... Page 29 REVOLV R410A Sweat Fit Coils... Page 31 MAYTAG Cross Reference Charts... Page 33 MAYTAG and REVOLV are covered by the best warranties in the industry. Ask us about our Maytag Merchandising Support Program Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO.
MAYTAG RG1 80% AFUE GAS FURNACES WITH COIL CABINET WITHOUT COIL CABINET Sealed Combustion: Vents exhaust gases directly outdoors and draws in outside fresh air for combustion Choice of Models: For up to 4 tons A/C and 3.5 tons H/P Modern Hot Surface Ignition: No pilot lights to blow out Low Maintenance: Sealed bearings on motors, reliable controls and burners. Appliance Quality Metal Door: With baked enamel finish for long life and easy cleaning. NOTE: Always consult AHRI directory for the most current approved split system matches COIL CABINET 911969A (20") or 922594 (26") Warranty 2 Years Parts / 1 Year Labor 10 Years Heat Exchanger Visit www.stylecrestinc.com for warranty registration 1
MAYTAG RG1 80% AFUE GAS FURNACES Furnace Model Number RG1D56N3 RG1D70N3 RG1D77N3 RG1D90N3 RG1D56C3 RG1D70C3 RG1D77C3 RG1D90C3 RG1D56N4 RG1D70N4 RG1D77N4 RG1D90N4 RG1D56C4 RG1D70C4 RG1D77C4 RG1D90C4 Gas-80%, Downflow, 56K BTU no cabinet, 3 Ton blower* Gas-80%, Downflow, 70K BTU no cabinet, 3 Ton blower* Gas-80%, Downflow, 77K BTU no cabinet, 3 Ton blower* Gas-80%, Downflow, 90K BTU no cabinet, 3 Ton blower* Gas-80%, Downflow, 56K BTU w/cabinet, 3 Ton blower Gas-80%, Downflow, 70K BTU w/cabinet, 3 Ton blower Gas-80%, Downflow, 77K BTU w/cabinet, 3 Ton blower Gas-80%, Downflow, 90K BTU w/cabinet, 3 Ton blower Gas-80%, Downflow, 56K BTU no cabinet, 4 Ton blower* Gas-80%, Downflow, 70K BTU no cabinet, 4 Ton blower* Gas-80%, Downflow, 77K BTU no cabinet, 4 Ton blower* Gas-80%, Downflow, 90K BTU no cabinet, 4 Ton blower Gas-80%, Downflow, 56K BTU w/cabinet, 4 Ton blower Gas-80%, Downflow, 70K BTU w/cabinet, 4 Ton blower Gas-80%, Downflow, 77K BTU w/cabinet, 4 Ton blower Gas-80%, Downflow, 90K BTU w/cabinet, 4 Ton blower Depth (D) Width (W) Height (H) Input MButh *For cooling and heat pump applications on no cabinet models, add coil cabinet 91196A (20 ) or 922594 (26 ) Accessories for Maytag RG1 80% AFUE Gas Furnaces Output MButh Orifice# Ntl Gas Orifice# LP Gas A/C Ready Tons Shipping Weight (lbs) 23-3 / 4 19-7 / 8 56 56 46 29 45 3 152 23-3 / 4 19-7 / 8 56 70 57 24 42 3 153 23-3 / 4 19-7 / 8 56 77 62 21 40 3 149 23-3 / 4 19-7 / 8 56 90 72 17 36 3 151 23-3 / 4 19-7 / 8 76 56 46 29 45 3 167 23-3 / 4 19-7 / 8 76 70 57 24 42 3 168 23-3 / 4 19-7 / 8 76 77 62 21 40 3 164 23-3 / 4 19-7 / 8 76 90 72 17 36 3 166 23-3 / 4 19-7 / 8 56 56 46 29 45 4 156 23-3 / 4 19-7 / 8 56 70 57 24 42 4 157 23-3 / 4 19-7 / 8 56 77 62 21 40 4 156 23-3 / 4 19-7 / 8 56 90 72 17 36 4 156 23-3 / 4 19-7 / 8 76 56 46 29 45 4 172 23-3 / 4 19-7 / 8 76 70 57 24 42 4 173 23-3 / 4 19-7 / 8 76 77 62 21 40 4 169 23-3 / 4 19-7 / 8 76 90 72 17 36 4 171 RG1 Clearances Plenum / Duct Connectors Part Number Roof Jacks Part Number All Models Closet Alcove 11.25 x 13.50 x 0.88 12/carton 901987A Roof Jack- SAW2135-2A 903662 Front 6 18 11.25 x 13.50 x 2.00 12/carton 901988A Roof Jack- SAW2747-2A 903663 Back - Sides - Roof Jack 0 0 11.25 x 13.50 x 4.25 6/carton 901989A Roof Jack- SAW3563-2A 903664 Top 6 6 11.25 x 13.50 x 6.25 6/carton 901990A Roof Jack- SAW5195-2A 920638 Top & Sides of Duct 0 0 11.25 x 13.50 x 8.25 4/carton 901991A Roof Jack- SAW2747-4A 903678A Bottom of Duct 0 0 11.25 x 13.50 x 10.25 3/carton 901992A Roof Jack- SAW3563-4A 903665A B Cabinet and A w/coil box) 0 0 11.25 x 13.50 x 12.25 3/carton 901993A Roof Jack- SAW5195-4A 903666A 11.25 x 13.50 x 6.25 24/carton 902681A Roof Jack- FAW1523-0A 903658 A Cabinet without coil box 1/4 1/4 20 Coil Cabinet 911969A Roof Jack- FAW2135-0A 903659 Sloped Roof Flashings Part Number 26 Coil Cabinet 922594 Roof Jack- FAW2747-0A 903660 Automatic Cavity Damper 901083 Ceiling Rings (2 pc. Adjustable) 902521 2.5 in 12-4/carton 903893 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 2
MAYTAG RG7 95% + AFUE GAS FURNACES WITH COIL CABINET High Efficiency: 95%+ AFUE. Sealed Combustion: Can be vented vertically or horizontally with PVC pipe. WITHOUT COIL CABINET Sealed Combustion-Vents Exhaust Gases: Directly outdoors and draws in outside fresh air for combustion. Choice of Models: For up to 4 tons A/C and 3.5 tons H/P** Modern Hot Surface Ignition: No pilot light to blow out. Multi-Speed Direct Drive Blower. Low Maintenance: Sealed bearings on motors, reliable controls and burners. Appliance Quality Metal Door: With baked enamel finish for long life and easy cleaning. **Always consult AHRI directory for the most current approved split system matches COIL CABINET 911969A (20 ) or 922594 (26 ) Warranty 2 Years Parts / 1 Year Labor 10 Years Heat Exchanger Visit www.stylecrestinc.com for warranty registration 3
MAYTAGRG7 95%+ AFUE GAS FURNACES Furnace Model Number RG7D45N4 RG7D60N4 RG7D72N4 RG7D45C4 RG7D60C4 RG7D72C4 RG7 95%+ Downflow GAS 45K BTU No Cabinet, 4 Ton Blower* RG7 95%+ Downflow GAS 60K BTU No Cabinet, 4 Ton Blower* RG7 95%+ Downflow GAS 72K BTU No Cabinet, 4 Ton Blower* RG7 95%+ Downflow GAS 45K BTU With Cabinet, 4 Ton Blower RG7 95%+ Downflow GAS 60K BTU With Cabinet, 4 Ton Blower RG7 95%+ Downflow GAS 72K BTU With Cabinet 4 Ton Blower Depth (D) Width (W) *For cooling and heat pump applications, add coil cabinet 91196A ( 20 ) or 922594 (26 ) Accessories for Maytag RG7 95%+ AFUE Gas Furnaces Height (H) Input MBtuh Output MButh A/C Ready Tons Shipping Weight (lbs) 23-3 / 4 19-7 / 8 56 45 42.75 4 150 23-3 / 4 19-7 / 8 56 60 57 4 150 23-3 / 4 19-7 / 8 56 72 68.4 4 155 23-3 / 4 19-7 / 8 76 45 42.75 4 170 23-3 / 4 19-7 / 8 76 60 57 4 170 23-3 / 4 19-7 / 8 76 72 68.4 4 175 Clearances Part Number All Models Closet Alcove Coil Cabinet (20 H) 911696A Front 1 1 Coil Cabinet (26 H) 922594 Back 0 0 Side Return Air Kit 904003 Sides 0 0 Neutralizer Kit - All Models 902377 Vent 0 0 PVC Isolation Kit 904063 Top 6 6 Vent Transition Kit 904106 Duct (Plenum w/coil box) 0 0 Concentric Vent Termination Kit (for horizontal and vertical venting) 904953 Duct (Plenum w/o coil box) within 3 feet 1/4 1/4 VENTING: All models are approved for both vertical and horizontal direct (2 pipe) venting applications. See Vent Table below for specified sizes and allowable lengths Maximum Direct Vent, Dual Pipe Length (ft.)* RG7 Inputs (BTUH) Inlet/Outlet 3 in. Diameter Inlet/Outlet 2 in. Diameter 45,000 60 30 60,000 60 30 72,000 60 30 *NOTES: Subtract 3.5 ft. for each additional 3 90 degree elbow. Two 45 degree elbows are equivalent to one 90 degree elbow. One short radius elbow is equivalent to two long radius elbows. Do not include termination elbows in calculation of vent length. This table is applicable for elevations from sea level to 2,000 ft. For higher elevations decrease vent pipe lengths by 8% per 1000 ft. of altitude. Only the listed pipe materials are approved for use with RG7 condensing furnaces. For Canadian applications, use ULC S636 approved material. Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 4
MAYTAG RE9 SERIES ELECTRIC FURNACES DOWNFLOW A/C and H/P Ready: For up through 4.0 tons. Available in: Downflow and Upflow configurations Built in Full Sized Coil Cabinet: No need to add parts. Built in Circuit Breakers: For safety and dependability. Nichrome Heating Elements: For long lasting efficient heat. UPFLOW Warranty 2 Years Parts / 1 Year Labor Visit www.stylecrestinc.com for warranty registration 5
MAYTAG RE ELECTRIC FURNACES Maytag RE9 Series Electric Furnace Furnace Information RE9D/U10C4 RE9D/U12C4 RE9D/U15C4 RE9D/U17C4 RE9D/U20C4 RE9D/U23C4 Heating Output (BTUH)* 35,000 41,000 53,000 57,000 57,000 75,000 Total kw ( Heating Elements and Blower) 10.4 12.0 15.4 16.6 20.4 22.0 Supply Voltage 240 Volts / 60 Hz / 1-Phase Heating Elements, No. ( Total kw) 2 (10) 2 (11.6) 3 (15.0) 3 (16.2) 4 (20.0) 4 (21.6) Blower Wheel Size Motor Speeds, HP Amps 10.5 Diameter / 8 Wide 4 Speed, 1/3 HP, 2.9 Amps Test ESP (in. w. c.) Max.3 Nominal Tonnage Air Volume Range with Factory Installed Blower 2.0-4.0 Tons Air Filter (Upflow Models) 16 x 20 x 1 Air Filter (Downflow Models) 18 x 30 x 1 (Front) 16 x 20 x 1 (Top) Furnace Dimensions * Heating output rated a listed voltage. For outputs at voltages other than 240V, multiply the Btuh rating by the following factors: x 0.92 (230V), x 0.84 (220V, x 0.75 (208V) 20 W x 60.63 H x 24.5 D Maytag RE9 Series Electrical Specifications Model Number Supply Circuit Total Amperes MCA MOCP RE9D/U10C4 Single 44.6 56 60 Single 51.2 64 70 RE9D/U12C4 Dual A 27.1 34 40 Dual B 24.2 30 30 Maytag RE9 Clearances Top & Sides All Models Front 1 Back Sides 2 Top of Duct Bottom of Duct Closet 6 0 0 0 0 0 Alcove 18 0 0 0 0 0 1 Service Clearance 2 For applications using upflow stand, 1 minimum per side Single 65.4 82 90 RE9D/U15C4 RE9D/U17C4 RE9D/U20C4 RE9D/U23C4 Dual A 44.6 56 60 Dual B 20.8 26 30 Single 70.4 88 90 Dual A 47.9 60 60 Dual B 22.5 28 30 Single 86.2 108 125 Dual A 44.6 56 60 Dual B 41.7 52 60 Single 93.8 117 125 Dual A 45.5 57 60 Dual B 48.0 60 60 Maytag RE9 Accessories Part Number 1007729 ECM Blower Kit 902985 5-Ton Blower 902989 Top Grille / Frame 903891 Coil Cabinet Downflow (Front Return) 904620A Upflow Stand 281241R Replacement Door for Upflow Stand 1006730 Coil Cabinet Upflow & Downflow, Solid Door 1006731 Coil Cabinet Upflow & Downflow, Louvered Door Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 6
MAYTAG RE9X SERIES ELECTRIC FURNACES A/C and H/P Ready: For up through 4.0 tons Convertible to: Downflow and Upflow configurations Built in Circuit Breakers: For safety anddependability Nichrome Heating Elements: For long lasting efficient heat Available: Full sized Upflow and Downflowcoil cabinets RE9X DIMENSIONS Warranty 2 Years Parts / 1 Year Labor Visit www.stylecrestinc.com for warranty registration 7
MAYTAG RE9X ELECTRIC FURNACES Furnace Model Number Depth (D) Width (W) Height^ (H) Total KW No. of Elements (Total KW) BTUH* Voltage 1-Phase RE9X10N4 Electric 10KW w/o cabinet 24 3 /4 20 29 10.4 2 (10.0) 35000 240V/60Hz RE9X12N4 Electric 12KW w/o cabinet 24 3 /4 20 29 12.0 2 (11.6) 41000 240V/60Hz RE9X15N4 Electric 15KW w/o cabinet 24 3 /4 20 29 15.4 3 (15.0) 53000 240V/60Hz RE9X17N4 Electric 17KW w/o cabinet 24 3 /4 20 29 16.6 3 (16.2) 57000 240V/60Hz RE9X20N4 Electric 20KW w/o cabinet 24 3 /4 20 29 20.4 4 (20.0) 70000 240V/60Hz RE9X23N4 Electric 23KW w/o cabinet 24 3 /4 20 29 22.0 4 (21.6) 75000 240V/60Hz Information for All Models Clearances Blower Wheel Size 10.5 Diameter, 8 Wide CLOSET ALCOVE Motor Speed H. P. Rating, Amps 4 Speed, 1/3 HP, 2.9 Front 6 18 Test ESP, in W. C. Max 0.3 Back 0 0 Optional Cooling Available with Factory Installed Blower 2.0-4.0 Ton Sides 0 0 Optional Heap Pump Available with Factory Installed Blower 2.0-4.0 Ton Top 0 0 Air Filter - Standard 16 x 20 x 1 Nominal Top & Sides of Duct 0 0 * Heating output rated at listed voltage. For outputs at voltages other than 240V, multiply BTUH rating by the following factors: x 0.92 (230V), x 0.84 (220V), x 0.75 (208V) ^Height is 56 with return air grille installed, 58 with coil cabinet, and 72 with coil cabinet and upflow stand. Bottom of Duct 0 0 Service Clearance for Upflow application using upflow stand 1 minimum per side Maytag RE9X Series Electrical Specifications Model Number Supply Circuit Total Amperes Maximum Over-current Rating Minimum Circuit Ampacity RE9X10N4 Single 44.6 60 56 Single 51.2 70 64 RE9X12N4 Dual A 27.1 40 34 Dual B 24.2 30 30 Single 65.4 90 82 RE9X15N4 Dual A 44.6 60 56 Dual B 20.8 30 26 Single 70.4 90 88 RE9X17N4 Dual A 47.9 60 60 Dual B 22.5 30 28 Single 86.2 125 108 RE9X20N4 Dual A 44.6 60 56 Dual B 41.7 60 52 Single 93.8 125 117 RE9X23N4 Dual A 45.5 60 57 Dual B 48.0 60 60 Maytag RE9X Airflow Data RE9X10N4, RE9X12N4, RE9X15N4, RE9X17N4, RE9X20N4, RE9X23N4 High Med. High Med. Low Low Coil Static (ESP) in W.C. Part Number Maytag RE9X Accessories 1007729 ECM Blower Kit 902985 Blower - 5 ton 902989 Top Grille / Frame 903891 Coil Cabinet Downflow (Front Return) 904620A 904620A 281241R 4 Ton No Coil 3.5 Ton No Coil 3 Ton No Coil 2.5 Ton No Coil 0.1 1559 1503 1389 1362 1227 1203 923 885 0.2 1506 1458 1352 1330 1208 1174 906 863 0.3 1460 1414 1310 1291 1170 1146 880 831 0.4 1401 1352 1260 1241 1136 1103 845 798 0.5 1333 1282 1198 1179 1086 1055 805 758 0.6 1251 1208 1133 1113 1027 996 757 707 Upflow Stand Replacement Door for Upflow Stand Coil Cabinet Upflow & Downflow w/solid Door 1006731 Coil Cabinet Upflow & Downflow w/louvered Door Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 8
MAYTAG M5 OIL FURNACES Sealed Combustion: Vents exhaust gases directly outdoors and draws in outside fresh air for combustion. Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access. Large, Effective Air Filter: Room air is cleaner with this permanent washable filter. High Efficiency Drum Heat Exchanger: delivers optimum heat transfer with low air resistance. Appliance quality metal door: With baked enamel finish for long life and easy cleaning. Fully Insulated Cabinet: Insures minimized heat loss and quiet operation. Reliable Burner: With uniform flame pattern extends life of heat exchanger. Warranty 2 Years Parts / 1 Year Labor 10 Years Heat Exchanger Visit www.stylecrestinc.com for warranty registration 9
MAYTAG M5 OIL FURNACES Maytag M5 Oil Furnaces New Maytag Model Number Previous Maytag Model Number Shipping Weight (lbs.) M5SB-066A-BW RO1D66C3 Oil, Downflow 66 MBtuh, with cabinet, 3 ton blower 167 M5SB-086A-BW RO1D86C3 Oil, Downflow 86 MBtuh, with cabinet, 3 ton blower 174 Maytag M5 Oil Furnace Specifications Model Number Input MButh Output MButh E.S.P (in WC) Motor HP Motor FLA A/C Ready Tons AFUE M5SB-066A-BW 66 56 0.3 1/4 6 3 83% M5SB-086A-BW 86 73 0.3 1/4 6 3 83% Clearances All Models Closet Alcove Front 6 18 Back 0 0 Sides 0 0 Roof Jack 0 0 Top 6 6 Top and Sides of Duct 0 0 Bottom of Duct 0 0 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 10
MAYTAG SPLIT SYSTEM ACCUCHARGE 14 SEER A/C Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is alsostronger and lighter than steel. Micro-Channel Coils: All aluminum coils in all models provides high corrosion resistance. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Designed Using Galvanized Steel: With a polyester urethane coat finish. The special 950 hour salt spray finish resists corrosion 50% better than comparable units. AccuCharge with FitRight Fittings: Correctly charged for fast easy installations. Indoor Coil Options: Tube in Fin and Micro-Channel coils are available. Filter-Drier: Factory Installed Split Systems 1 YEAR LABOR AccuCharge 5 YEARS PARTS Warranty 5 Years Parts / 1 Year Labor * * To receive 10 year Parts Limited Warranty, online registration of unit must be completed within 60 days of installation. Visit www.stylecrestinc.com for warranty registration 11
MAYTAGSPLIT SYSTEM ACCUCHARGE 14 SEER A/C Tons Nominal Condenser SKU AHRI Model Number 2 RSC1424 RS4QE-024KB 2.5 RSC1430 RS4QE-030KB 3 RSC1436 RS4QE-036KA 3.5 RSC1442 RS6QF-042K 4 RSC1448 RS6QF-048K Maytag Split System AccuCharge Air Conditioner 2.0 Ton Maytag Split System AccuCharge Air Conditioner 2.5 Ton Maytag Split System AccuCharge Air Conditioner 3.0 Ton Maytag Split System AccuCharge Air Conditioner 3.5 Ton Maytag Split System AccuCharge Air Conditioner 4.0 Ton Depth (D) Width (W) Height (H) Vapor Line Liquid Line Pad Size 22 ¾ 22 ¾ 33 3/4 3/8 24 x 24 30 ¾ 30 ¾ 29 3/4 3/8 32 x 32 30 ¾ 30 ¾ 37 7/8 * 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 * 3/4 up to 24 length 20 Tube in Fin Indoor Coil Matches - TXV Metering Device 26 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RSC1424 1836M4A 23000 2.5 RSC1430 1836M4A 28000 3 RSC1436 187848M4A 33800 3.5 RSC1442 187848M4A 39500 4 RSC1448 187848M4A 45000 Tons Nominal Condenser SKU Large (Min 26 in Height) Coil Cabinet Furnaces Only BTUH 3 RSC1436 1845M4A 33800 3.5 RSC1442 1845M4A 39000 4 RSC1448 1847M4A 46000 20 Micro Channel Indoor Coil Matches - TXV Metering Device 26 Tons Nominal Condenser SKU Small or large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RSC1424 C8QAMX24U-B 24000 2.5 RSC1430 C8QAMX30U-B 29000 3 RSC1436 C8QAMX36U-B 34000 Tons Nominal Condenser SKU Large (Min 26 in Height) Coil Cabinet Furnaces Only BTUH 3.5 RSC1442 C8QAMX42U-B 40000 4 RSC1448 C8QAMX48U-B 44000 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 12
MAYTAG SPLIT SYSTEM ACCUCHARGE 14 SEER H/P Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Micro-Channel Coils: All aluminum coils in all models provides high corrosion resistance. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Designed Using Galvanized Steel: With a polyester urethane coat finish. The special 950 hour salt spray finish resists corrosion 50% better than comparable units. AccuCharge with FitRight Fittings: Correctly charged for fast easy installations. Thermostat: Factory supplied - Field installed Filter Drier: Factory Installed Split Systems 1 YEAR LABOR AccuCharge 5 YEARS PARTS Warranty 5 Years Parts / 1 Year Labor * * To receive 10 year Parts Limited Warranty, online registration of unit must be completed within 60 days of installation. Visit www.stylecrestinc.com for warranty registration 13
MAYTAGSPLIT SYSTEM ACCUCHARGE 14 SEER H/P Nominal Tons Unit SKU Maytag Split System AccuCharge Quick Connect Heat Pump 14 SEER AHRI Model # 2 RSH1424 RT4QE-024KA 2.5 RSH1430 RT4QE-030KA 3 RSH1436 RT4QE-036KA 3.5 RSH1442 RT4QE-042KA 4 RSH1448 RT4QE-048KA 2.0 Ton Quick Connect Split System 14 SEER Heat Pump 2.5 Ton Quick Connect Split System 14 SEER Heat Pump 3.0 Ton Quick Connect Split System 14 SEER Heat Pump 3.5 Ton Quick Connect Split System 14 SEER Heat Pump 4.0 Ton Quick Connect Split System 14 SEER Heat Pump Depth (D) Width (W) Height (H) Vapor Line Liquid Line Pad Size 30 ¾ 30 ¾ 33 3/4 3/8 32 x 32 30 ¾ 30 ¾ 42 3/4 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 Nominal Tons Maytag Split System AccuCharge Quick Connect Heat Pump 14 SEER Coil Matches Unit SKU AHRI Model # Micro-Channel Sweat Fit Coil Coil Dimensions (H x W x D) Cooling Capacity Heating Capacity 47 Heating Capacity 17 2 RSH1424 RT4QE-024KA C8QAMX24U-B 18 x 18 1 /8 x 19 1 /2 23600 22600 14000 2.5 RSH1430 RT4QE-030KA C8QAMX30U-B 18 x 18 1 /8 x 19 1 /2 28000 28000 16400 3 RSH1436 RT4QE-036KA C8QAMX36U-B 18 x 18 1 /8 x 19 1 /2 34000 34000 20600 3.5 RSH1442 RT4QE-042KA C8QAMX42U-B 25 x 18 1 /8 x 19 1 /2 40500 42500 25200 4 RSH1448 RT4QE-048KA C8QAMX48U-B 29 x 18 1 /8 x 19 1 /2 46000 47000 28200 Maytag Split System Heat Pump Coil Cabinets Coil Cabinet (20 H) - RG1 / RG7 SKU 911969A Coil Cabinet (26 H) - RG1 / RG7 922594 Coil Cabinet (20 H) - VMA3 08560003 Coil Cabinet (24 H) - VMA3 08560004 Top Grille / Frame - RE9X 902989 Coil Cabinet (29 H) - Downflow (Front Return) RE9X Coil Cabinet (29 H) - Upflow & Downflow (Solid Door) RE9X Coil Cabinet (29 H) - Upflow & Downflow (Louvered Door) RE9X 903891 1006730 1006731 Maytag Accessories SKU Start Assist Kit 912933 Fan Delay Kit (TDR) 918476 Thermostat (2 - Stage) 913852 Dual Fuel Kit 103010004 Mild Weather Kit 921956 Extreme Wind Condition Mounting Kit 920900 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 14
MAYTAG SPLIT SYSTEM ACCUCHARGE 13 SEER A/C Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Micro-Channel Coils: All aluminum coils in all models provides high corrosion resistance. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Designed Using Galvanized Steel: With a polyester urethane coat finish. The special 950 hour salt spray finish resists corrosion 50% better than comparable units. AccuCharge with FitRight Fittings: Correctly charged for fast easy installations. Indoor Coil Options: Tube in Fin and Micro-Channel coils are available. Filter-Drier: Factory Installed Split Systems 1 YEAR LABOR AccuCharge 5 YEARS PARTS Warranty 5 Years Parts / 1 Year Labor * * To receive 10 year Parts Limited Warranty, online registration of unit must be completed within 60 days of installation. Visit www.stylecrestinc.com for warranty registration 15
MAYTAGSPLIT SYSTEM ACCUCHARGE 13 SEER A/C ^Tons Nominal Condenser SKU AHRI Model Number 2 RSC1324 RS4QD-024KC 2.5 RSC1330 RS4QD-030KC 3 RSC1336 RS4QD-036KC 3.5 RSC1342 RS4QD-042KD 4 RSC1348 RS4QD-048KC ^ Refer to AHRI Listings for actual applications and capacities Maytag Split System AccuCharge QC Air Conditioner 2.0 Ton Maytag Split System AccuCharge QC Air Conditioner 2.5 Ton Maytag Split System AccuCharge QC Air Conditioner 3.0 Ton Maytag Split System AccuCharge QC Air Conditioner 3.5 Ton Maytag Split System AccuCharge QC Air Conditioner 4.0 Ton Depth (D) Width (W) Height (H) Vapor Line Liquid Line Pad Size 22 ¾ 22 ¾ 25 3/4 3/8 24 x 24 22 ¾ 22 ¾ 29 3/4 3/8 24 x 24 22 ¾ 22 ¾ 29 7/8 * 3/8 24 x 24 30 ¾ 30 ¾ 29 7/8 3/8 32 x 32 30 ¾ 30 ¾ 29 7/8 3/8 32 x 32 * 3/4 up to 24 length 20 Tube in Fin Indoor Coil Matches - TXV Metering Device 26 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RSC1324 1836M4A 23000 2.5 RSC1330 1836M4A 27600 3 RSC1336 1854M4A 34400 3.5 RSC1342 1854M4A 39500 4 RSC1348 187848M4A 44500 Tons Nominal Condenser SKU Large (Min 26 in Height) Coil Cabinet Furnaces Only BTUH 3 RSC1336 1845M4A 34400 3.5 RSC1342 1845M4A 39500 4 RSC1348 1847M4A 46000 Micro Channel Indoor Coil Matches - Piston Metering Device 20 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RSC1324 C8QAMO24U-B 23400 2.5 RSC1330 C8QAMO30U-B 28600 3 RSC1336 C8QAMO36U-B 35400 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 16
MAYTAG SPLIT SYSTEM SWEAT FIT 14 SEER A/C Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Micro-Channel Coils: All aluminum coils in all models provides high corrosion resistance. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Designed Using Galvanized Steel: With a polyester urethane coat finish. The special 950 hour salt spray finish resists corrosion 50% better than comparable units. Indoor Coil Options: Tube in Fin and Micro-Channel coils are available. Filter-Drier: Factory Supplied, Field Installed W 17 Split Systems 30 DAYS LABOR SweatFit 5 YEARS PARTS Warranty 5 Years Parts /30 Days Labor * * To receive 10 year Parts Limited Warranty, online registration of unit must be completed within 60 days of installation. Visit www.stylecrestinc.com for warranty registration D H
MAYTAG SPLIT SYSTEM SWEAT FIT 14 SEER A/C Tons Nominal Condenser SKU 2 RS4BE-024KA 2.5 RS4BE-030KA 3 RS4BE-036KA 3.5 RS6BF-042K 4 RS6BF-048K Maytag Split System Sweat Fit Air Conditioner 2.0 Ton Maytag Split System Sweat Fit Air Conditioner 2.5 Ton Maytag Split System Sweat Fit Air Conditioner 3.0 Ton Maytag Split System Sweat Fit Air Conditioner 3.5 Ton Maytag Split System Sweat Fit Air Conditioner 4.0 Ton Depth (D) Width (W) Height (H) Vapor Line Liquid Line Pad Size 22 ¾ 22 ¾ 33 3/4 3/8 24 x 24 30 ¾ 30 ¾ 29 3/4 3/8 32 x 32 30 ¾ 30 ¾ 37 7/8 * 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 * 3/4 up to 24 length Tube in Fin Indoor Coil Matches - TXV Metering Device 26 20 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RS4BE-024KA 1836S4A 23000 2.5 RS4BE-030KA 1836S4A 28000 3 RS4BE-036KA 187848S4A 33800 3.5 RS6BF-042K 187848S4A 39500 4 RS6BF-048K 187848S4A 45000 Tons Nominal Condenser SKU Large (Min 26 in Height) Coil Cabinet Furnaces Only BTUH 3 RS4BE-036KA 1845S4A 33000 3.5 RS6BF-042K 1845S4A 39000 4 RS6BF-048K 1847S4A 44000 Micro Channel Indoor Coil Matches - Piston Metering Device 20 26 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RS4BE-024KA C8DAMX24U-B 24000 2.5 RS4BE-030KA C8DAMX30U-B 29000 3 RS4BE-036KA C8DAMX36U-B 34000 Tons Nominal Condenser SKU Large (Min 26 in Height) Coil Cabinet Furnaces Only BTUH 3.5 RS6BF-042K C8DAMX42U-B 40000 4 RS6BF-048K C8DAMX48U-B 44000 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 18
MAYTAG SPLIT SYSTEM SWEAT FIT 14 SEER H/P Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Micro-Channel Coils: All aluminum coils in all models which provides high corrosion resistance. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Designed Using Galvanized Steel: With a polyester urethane coat finish. The special 950 hour salt spray finish resists corrosion 50% better than comparable units. Thermostat: Factory Supplied, Field Installed Filter-Drier: Factory Supplied, Field Installed W Split Systems 30 DAYS LABOR SweatFit 5 YEARS PARTS Warranty 5 Years Parts /30 Days Labor * * To receive 10 year Parts Limited Warranty, online registration of unit must be completed within 60 days of installation. Visit www.stylecrestinc.com for warranty registration D H 19
MAYTAG SPLIT SYSTEM SWEAT FIT 14 SEER H/P Nominal Tons^ Unit SKU Maytag Split System Sweat Fit Heat Pumps 14 SEER Depth (D) Width (W) Height (H) Vapor Line Liquid Line Pad Size 2 RT4BE-024KA 2.0 Ton Sweat Fit Split System H/P 30 ¾ 30 ¾ 33 3/4 3/8 32 x 32 2.5 RT4BE-030KA 2.5 Ton Sweat Fit Split System H/P 30 ¾ 30 ¾ 42 3/4 3/8 32 x 32 3 RT4BE-036KA 3.0 Ton Sweat Fit Split System H/P 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 3.5 RT4BE-042KA 3.5 Ton Sweat Fit Split System H/P 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 4 RT4BE-048KA 4.0 Ton Sweat Fit Split System H/P 30 ¾ 30 ¾ 45 7/8 3/8 32 x 32 ^ Refer to AHRI listings for actual applications an capacities Nominal Tons Unit SKU Maytag Split System Sweat Fit Heat Pump Coil Matches Micro-Channel Sweat Fit Coil Coil Dimensions (H x W x D) Cooling Capacity Heating Capacity 47 Heating Capacity 17 2 RT4BE-024KA C8DAMX24U-B 18 x 18 1 /8 x 19 1 /2 23600 22600 14000 2.5 RT4BE-030KA C8DAMX30U-B 18 x 18 1 /8 x 19 1 /2 28000 28000 16400 3 RT4BE-036KA C8DAMX36U-B 18 x 18 1 /8 x 19 1 /2 34000 34000 20600 3.5 RT4BE-042KA C8DAMX42U-B 25 x 18 1 /8 x 19 1 /2 40500 42500 25200 4 RT4BE-048KA C8DAMX49U-B 29 x 18 1 /8 x 19 1 /2 46000 47000 28200 Maytag Split System Heat Pump Coil Cabinets Coil Cabinet (20 H) - RG1 / RG7 SKU 911969A Coil Cabinet (26 H) - RG1 / RG7 922594 Coil Cabinet (20 H) - VMA3 08560003 Coil Cabinet (24 H) - VMA3 08560004 Top Grille / Frame - RE9X Coil Cabinet (29 H) - Downflow (Front Return) RE9X Coil Cabinet (29 H) - Upflow & Downflow (Solid Door) RE9X Coil Cabinet (29 H) - Upflow & Downflow (Louvered Door) RE9X 902989A 903891A 1006730 1006731 Maytag Accessories Start Assist Kit Fan Delay Kit (TDR) SKU 912933A 918476A Thermostat 913852 Thermostat 111020 Dual Fuel Kit 13010004 Mild Weather Kit 921956 Extreme Wind Condition Mounting Kit 920900 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 20
MAYTAG SPLIT SYSTEM SWEAT FIT 13 SEER A/C Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is stronger and lighter than steel. Micro-Channel Coils: All aluminum coils in all models provides high corrosion resistance. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Designed Using Galvanized Steel: With a polyester urethane coat finish. The special 950 hour salt spray finish resists corrosion 50% better than comparable units. Indoor Coil Options: Tube in Fin and Micro-Channel coils are available. Filter-Drier: Factory Supplied, Field Installed W Split Systems 30 DAYS LABOR SweatFit 5 YEARS PARTS Warranty 5 Years Parts /30 Days Labor * * To receive 10 year Parts Limited Warranty, online registration of unit must be completed within 60 days of installation. Visit www.stylecrestinc.com for warranty registration D H 21
MAYTAG SPLIT SYSTEM SWEAT FIT 13 SEER A/C Tons Nominal^ Condenser SKU 2 RS4BD-024KB 2.5 RS4BD-030KB 3 RS4BD-036KB 3.5 RS4BD-042KB 4 RS4BD-048KB ^ Refer to AHRI listings for actual applications and capacities Maytag Split System Sweat Fit Air Conditioner 2.0 Ton Maytag Split System Sweat Fit Air Conditioner 2.5 Ton Maytag Split System Sweat Fit Air Conditioner 3.0 Ton Maytag Split System Sweat Fit Air Conditioner 3.5 Ton Maytag Split System Sweat Fit Air Conditioner 4.0 Ton Depth (D) Width (W) Height (H) Vapor Line Liquid Line Pad Size 22 ¾ 22 ¾ 25 3/4 3/8 24 x 24 22 ¾ 23 ¾ 29 3/4 3/8 24 x 24 22 ¾ 23 ¾ 29 7/8 * 3/8 24 x 24 30 ¾ 30 ¾ 29 7/8 3/8 32 x 32 30 ¾ 30 ¾ 29 7/8 3/8 32 x 32 * 3/4 up to 24 length 20 Tube in Fin Indoor Coil Matches - TXV Metering Device 26 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RS4BD-024KB 1836S4A 23000 2.5 RS4BD-030KB 1836S4A 27600 3 RS4BD-036KB 1854S4A 34400 3.5 RS4BD-042KB 1854S4A 39500 4 RS4BD-048KB 187848S4A 44500 Tons Nominal Condenser SKU Large (Min 26 in Height) Coil Cabinet Furnaces Only BTUH 3 RS4BD-036K 1845S4A 34400 3.5 RS4BD-042KB 1845S4A 39500 4 RS4BD-048KB 1847S4A 46000 Micro Channel Indoor Coil Matches - Piston Metering Device 20 Tons Nominal Condenser SKU Small or Large (Min 20 in Height) Coil Cabinet Furnaces BTUH 2 RS4BD-024KB C8DAM01830U-B 23400 2.5 RS4BD-030KB C8DAM01830U-B 28800 3 RS4BD-036KB C8DAM036U-B 35600 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 22
MAYTAG PACKAGED SYSTEM 14 SEER A/C Quality Compressor: State of the art compressor is standard equipment. Hi/Low Pressure Switches: Ensures long compressor life. Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Eliminates corrosion. ECM Blower Motor: Fixed torque energy efficient brushless DC ECM motor. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Compact Footprint and Profile: Make the MPC Series easy to install and transport. Optional Electric Heat: Field installed 5-15 KW 1 YEAR LABOR Packaged Units Warranty 10 Years Parts / 1 Year Labor Visit www.stylecrestinc.com for warranty registration 10 YEARS PARTS 23
MAYTAG PACKAGED A/C 14 SEER Tons Nominal Unit SKU 1.5 RPC1418 2 RPC1424 2.5 RPC1430 3 RPC1436 3.5 RPC1442 4 RPC1448 5 RPC1460 Maytag Packaged Air Conditioner 1.5 Ton Maytag Packaged Air Conditioner 2.0 Ton Maytag Packaged Air Conditioner 2.5 Ton Maytag Packaged Air Conditioner 3.0 Ton Maytag Packaged Air Conditioner 3.5 Ton Maytag Packaged Air Conditioner 4.0 Ton Maytag Packaged Air Conditioner 5.0 Ton Length (L) Width (W) Height (H) A B Cooling BTUH 49 35 22.2 35.02 2.48 17800 49 35 22.2 35.02 2.48 23800 49 35 22.2 35.02 2.48 28400 49 35 22.2 35.02 2.48 35000 49 35 30.2 35.02 2.48 40500 49 35 30.2 35.02 2.48 47000 49 35 34.2 35.02 2.48 56000 Maytag 14 SEER Packaged Air Conditioner Heat Strip Kits & Accessories Heat Strip KW Heat Strip SKU Accessories Accessory SKU 5 H3HK005H-01C 4-Pole Single Circuit Adapter 913350 10 H3HK010H-01C 6-Pole Single Circuit Adapter 913556 15 H3HK015H-01C Circuit Breaker Single Phase (2-Pole) 913554 Duct Collar (12 ) 294941A Duct Collar (14 ) 294942A (1.5, 2, 2.5, & 3 ton) Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 24
MAYTAG PACKAGED SYSTEM 14 SEER H/P First in Industry Patented Hot Gas Defrost: Ensures complete, worry-free defrost. 1 YEAR LABOR Packaged Units 10 YEARS PARTS Warranty 10 Years Parts / 1 Year Labor Visit www.stylecrestinc.com for warranty registration Quality Compressor: State of the art compressor is standard equipment. Hi/Low Pressure Switches: Ensure long compressor life. Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Eliminates corrosion. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow Compact Footprint and Profile: Make the MPH series easy to transport and install. Five Minute Restart Time Delay: When the unit shuts down, a five minute delay keeps the unit from restarting, eliminating the highest cause of compressor failure. Thermostat: Is standard equipment. Optional Electric Heat: Field installed 5 15 KW. 25
MAYTAG PACKAGED H/P 14 SEER Tons Nominal Unit SKU 2 RPH1424 2.5 RPH1430 3 RPH1436 3.5 RPH1442 4 RPH1448 5 RPH1460 Revolv Packaged Heat Pump 2.0 Ton Revolv Packaged Heat Pump 2.5 Ton Revolv Packaged Heat Pump 3.0 Ton Revolv Packaged Heat Pump 3.5 Ton Revolv Packaged Heat Pump 4.0 Ton Revolv Packaged Heat Pump 5.0 Ton Length (L) Width (W) Height (H) A B Cooling BTUH Heating BTUH (47 F) 49 35 30.2 35.02 2.48 23200 21800 49 35 30.2 35.02 2.48 28200 27400 49 35 30.2 35.02 2.48 35000 34600 49 35 30.2 35.02 2.48 41300 39000 63 35 38.2 35.02 2.48 48000 48000 63 35 38.2 35.02 2.48 55500 56000 Maytag 14 SEER Packaged Heat Pump Heat Strip Kits & Accessories Heat Strip KW Heat Strip SKU Accessories Accessory SKU 5 H3HK005H-01C 4-Pole Single Circuit Adapter 913350 10 H3HK010H-01C 6-Pole Single Circuit Adapter 913556 15 H3HK015H-01C Circuit Breaker Single Phase (2-Pole) 913554 Duct Collar (12 )* 294941A Duct Collar (14 )** 294942A * 12 Supply Connection, All Models. 12 Return Connection 2 Ton Models **14 Return Connection, 2.5-5 Ton Models Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 26
REVOLV VMA / VMC SERIES GAS FURNACES VMA VMC D A Ease of installation: Fits standard Manufactured Housing furnace footprint Easy conversion from natural gas to propane: All models have convertible gas valves A/C ready: Up to 3.0-4.0 tons* Multi-speed blower: Easily adapted to air flow needs of the home Limited lifetime heat exchanger warranty E B ETL Listed Sealed combustion design: Provides combustion air from outside D C 18 - Gauge Aluminized Steel primary heat exchanger and 24C stainless steel secondary heat exchanger: Provides durability and long service life Robust design: Built with high quality components Key Features A Multi-Speed Blower for Quiet, Efficient Operation B Limited Lifetime Heat Exchanger and 5 Year Parts Warranties C Silicon Nitride Igniter for Quiet and Consistent Lightoff Improved Ignition: New gas valve slow opening Two piece top: Greatly improves installation access to vent pipes Energy Star ES-Models available *3.5 Ton on 50K BTU - 4.0 Ton on 75K BTU D E Two Piece top for improved installation access New Integral Coil Cabinet Models 27
Today s changing government standards are making it more difficult than ever to find the right matching equipment for Manufactured homes... We have the answers! REVOLV VMA / VMC SERIES GAS FURNACES Model Number Part Number Input MBtuh Maximum Output MBtuh AFUE A/C Tons Blower Motor (Type / HP / Speeds) Coil Cabinet Dimensions H x W x D Shipping Weight VMA3-50D36N 08540003 50 48 95% 3.5 PSC / 1/2 / 4 Optional 57 x 18 x 25 3/4 175 VMA3-75D36N 08540004 75 72 95% 4 PSC / 1/2 / 4 Optional 57 x 18 x 25 3/4 185 VMC1-50D36N 08540005 50 48 95% 3.5 PSC / 1/2 / 4 Yes 76 1/8 x 18 3/4 x 25 3/4 195 VMC1-75D36N 08540006 75 72 95% 4 PSC / 1/2 / 4 Yes 76 1/8 x 18 3/4 x 25 3/4 205 VMC1-50DV3N 08540007 50 48 95% 3.5 ECM / 1/2 / 5 Yes 76 1/8 x 18 3/4 x 25 3/4 195 VMC1-75DV3N 08540008 75 72 95% 4 ECM / 1/2 / 5 Yes 76 1/8 x 18 3/4 x 25 3/4 205 These models meet Energy Star 4.0 Requirements See www.energy.gov for details 08560001 VMA/VMC Combustible Base 08560002 VMA/VMC Concentric Vent Kit w/roof Flashing 08560005 VMA/VMC Concentric Vent Kit 08560006 VMA/VMC Roof Flashing Kit 08560007 VMA/VMC 3 x 4 Draft Transition 08560008 VMA/VMC 3 x 5 Draft Transition 08560009 VMA/VMC Roof Jack Close-off 08560003 VMA/VMC Coil Cabinet (20 ) 08560004 VMA/VMC Coil Cabinet (24 ) 07540023 Condensate Pump 57 H 76 1/8 H VMA3 18 W 25 3/4 D VMC1 25 3/4 D 18 3/4 W 28
REVOLV R410A ACCUCHARGE M SERIES COILS A The Revolv R410A Coil series is designed to be "THE" A-COIL choice to be installed on new and existing down flow MH furnaces. Revolv AccuCharge Coils are designed to work with AccuCharge condensers. B D C Compatible with A/C and H/P installations. Compatible with all standard mobile home furnaces. E F G Key Features A B C D E F G Mounted TXV sensor bulb AccuCharge fittings Factory installed TXV valve suitable for A/C or H/P applications Coil has built-in strainer for coil protection UL listed and leak tested to 500 p.s.i. Code approved 2 opening drain pan Dry type pan does not maintain standing water Kit contains drain hose, fittings, and furnace cover plates for gas/oil furnace 29
Today s changing government standards are making it more difficult than ever to find the right matching equipment for Manufactured homes... We have the answers! REVOLV R410A ACCUCHARGE M SERIES COILS D H W Part Number Revolv R410A AccuCharge "M" Series Manufactured Coils No. of Rows * Face Area (ft2) H x W x D 1836M4A Coil-Revolv QC R410A A/C- H/P 3 4.00 18 x 18 x 19 5/8 1845M4A Coil-Revolv QC R410A A/C- H/P 3 5.83 24 1/2 x 18 x 19 1/2 1847M4A Coil-Revolv QC R410A A/C- H/P 4 4.89 22 1/2 x 18 x 19 5/8 1854M4A Coil-Revolv QC R410A A/C- H/P 4 4.00 18 x 18 x 19 5/8 187848MA Coil-Revolv QC R410A A/C- H/P 4 4.54 19 1/2 x 18 x 19 5/8 * NOTE: Refer to AHRI Listings for Actual Applications and Capacities Revolv R410A Manufactured Coil Accessories 18R72DB0003 TXV KIT R410A Revolv 1.5-3.0 T 18R72DB0004 TXV KIT R410A Revolv 2.5-5.0 T 1899911101 Revolv COIL UNIVERSAL DRAIN PAN Tube in Fin Indoor Coils - TXV Metering Device 20 26 Small or Large (Min 20 in Height) Coil Cabinet Furnaces 1836M4A 1854M4A 187848M4A Large (Min 26 in Height) Coil Cabinet Furnaces Only 1845M4A 1847M4A 30
REVOLV R410A SWEAT FIT COILS The Revolv R410A Coil series is designed to be "THE" A-COIL choice to be installed on new and existing down flow MH furnaces. Revolv Coils work with many national brands in 13 and 14 SEER A/C and H/P applications. A B Compatible with all standard mobile home furnaces. * Special drain pans available for up flow gas/oil applications. C D * Confirm furnace coil cavity dimensions. Refer to coil dimension table. E Key Features A B C D E Factory installed TXV valve suitable for A/C or H/P applications Coil has built-in strainer for coil protection UL listed and leak tested to 500 p.s.i. Code approved 2 opening drain pan Dry type pan does not maintain standing water Kit contains drain hose, fittings, and furnace cover plate for gas/oil furnaces 31
H Today s changing government standards are making it more difficult than ever to find the right matching equipment for Manufactured homes... We have the answers! REVOLV R410A SWEAT FIT COILS D W Revolv R410A Sweat Fit - Manufactured Coils Part Number No. of Rows Face Area (ft2) H x W x D 1829S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.00 18 1/2 x 18 x 19 5/8 1830S4A Coil - Revolv Sweat Fit R410A A/C - H/P 3 3.11 14 x 18 x 19 5/8 1836S4A Coil - Revolv Sweat Fit R410A A/C - H/P 3 4.00 18 x 18 x 19 5/8 1837S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.86 20 1/2 x 18 x 20 1/2 1844S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.00 18 1/2 x 18 x 19 5/8 1845S4A Coil - Revolv Sweat Fit R410A A/C - H/P 3 5.83 24 x 18 x 20 1/2 1847S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.89 22 1/2 x 18 x 19 5/8 1851S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.83 19 x 18 x 21 1854S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.00 18 1/2 x 18 x 19 5/8 1855S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.44 20 1/2 x 18 x 19 5/8 1856S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 5.33 24 1/2 x 18 x 19 5/8 187848S4A Coil - Revolv Sweat Fit R410A A/C - H/P 4 4.54 19 1/2 x 18 x 19 5/8 * NOTE: Refer to AHRI Listings for Actual Applications and Capacities Revolv R410A - Manufactured Coil Accessories 18R72DB0003 TXV Kit R410A Revolv 1.5-3.0 T 18R72DB0004 TXV Kit R410A Revolv 2.5-5.0 T 1899911101 Revolv Coil Universal Drain Pan 20 Tube in Fin Indoor Coils - TXV Metering Device 26 Small or Large (Min 20 in Height) Coil Cabinet Furnaces 1829S4A 1830S4A 1836S4A 1844S4A 1851S4A 1854S4A 1855S4A 187848S4A - - Large (Min 26 in Height) Coil Cabinet Furnaces Only 1837S4A 1837S4A 1845S4A 1847S4A 1856S4A 32
CROSS REFERENCE CHART Old Maytag or Coleman to New Maytag Model Numbers Furnace Cross Reference Furnaces Electric Downflow Heat Only Application No Coil Cabinet Old Maytag SKU Old Maytag New Maytag SKU New Maytag Coleman (2015 and earlier) Coleman E4EB10H Furnace-Electric 10KW DF-w/o cabinet RE9D10N4 Furnace-Electric 10KW DF-w/o cabinet Does not apply. All models are 51.5 tall one piece cabinets with empty cavity above heater box assembly. E4EB12H Furnace-Electric 12KW DF-w/o cabinet RE9D12N4 Furnace-Electric 12KW DF-w/o cabinet E4EB15H Furnace-Electric 15KW DF-w/o cabinet RE9D15N4 Furnace-Electric 15KW DF-w/o cabinet E4EB17H Furnace-Electric 17KW DF-w/o cabinet RE9D17N4 Furnace-Electric 17KW DF-w/o cabinet E4EB20H Furnace-Electric 20KW DF-w/o cabinet RE9D20N4 Furnace-Electric 20KW DF-w/o cabinet E4EB23H Furnace-Electric 23KW DF-w/o cabinet RE9D23N4 Furnace-Electric 23KW DF-w/o cabinet Furnaces Electric Downflow Attached Coil Cabinet for A/C or H/P Applications Old Maytag SKU Old Maytag New Maytag SKU New Maytag Coleman (2015 and earlier) Coleman E4B*** All Models Not standard equipment, optional cabinet available if required. RE9D10C4 Furnace-Electric 10KW DF-w/cabinet EB10E Furnace-Electric 10KW-E Series - - RE9D12C4 Furnace-Electric 12KW DF-w/cabinet EB12E Furnace-Electric 12KW-E Series - - RE9D15C4 Furnace-Electric 15KW DF-w/cabinet EB15E Furnace-Electric 15KW-E Series - - RE9D17C4 Furnace-Electric 17KW DF-w/cabinet EB17E Furnace-Electric 17KW-E Series - - RE9D20C4 Furnace-Electric 20KW DF-w/cabinet EB20E Furnace-Electric 20KW-E Series - - RE9D23C4 Furnace-Electric 23KW DF-w/cabinet EB23E Furnace-Electric 23KW-E Series Note: RE9 is A/C ready from 2 to 4 ton with no additional cabinet parts required. Large coil box design accomodates 14 SEER A/C & H/P coils. Standard 18x20 filter for improved performance. SKU not direct comparison, refer to the note. Note: EB series requires a coil shelf kit and an extension in some instances. Coil box does not accomodate 14 SEER large coils and H/P coils. Furnaces Electric Upflow Attached Coil Cabinet for A/C or H/P Applications Old Maytag SKU Old Maytag New Maytag SKU New Maytag Coil SKU Coleman (2015 and earlier) Coleman E4EB10H Furnace-Electric 10KW DF-w/o cabinet RE9U10C4 Furnace-Electric 10KW UF-w/cabinet EB10E Furnace-Electric 10KW-E Series E4EB12H Furnace-Electric 12KW DF-w/o cabinet RE9U12C4 Furnace-Electric 12KW UF-w/cabinet EB12E Furnace-Electric 12KW-E Series E4EB15H Furnace-Electric 15KW DF-w/o cabinet RE9U15C4 Furnace-Electric 15KW UF-w/cabinet EB15E Furnace-Electric 15KW-E Series E4EB17H Furnace-Electric 17KW DF-w/o cabinet RE9U17C4 Furnace-Electric 17KW UF-w/cabinet EB17E Furnace-Electric 17KW-E Series E4EB20H Furnace-Electric 20KW DF-w/o cabinet RE9U20C4 Furnace-Electric 20KW UF-w/cabinet EB20E Furnace-Electric 20KW-E Series E4EB23H Furnace-Electric 123KW DF-w/o cabinet RE9U23C4 Furnace-Electric 23KW UF-w/cabinet EB23E Furnace-Electric 23KW-E Series Note: RE9 is A/C ready from 2 to 4 ton with no additional cabinet parts required. Large coil box SKU not direct comparison, refer to the note. Note: EB series requires a coil shelf kit and an extension in some design accomodates 14 SEER A/C & H/P coils. Standard 18x20 filter for improved performance. instances. Coil box does not accomodate 14 SEER large coils and H/P coils. Furnaces 80% Gas Downflow w/18 Coil Cabinet Old Maytag SKU Old Maytag New Maytag SKU New Maytag Coil SKU Coleman (2015 and earlier) Coleman M1MB056ABW Furnace-Gas 56BTU-80%-3T-w/cabinet RG1D56C3 Furnace-Gas 56BTU-80%-3T-w/cabinet - - M1MB070ABW Furnace-Gas 70BTU-80%-3T-w/cabinet RG1D70C3 Furnace-Gas 70BTU-80%-3T-w/cabinet - - M1MB077ABW Furnace-Gas 77BTU-80%-3T-w/cabinet RG1D77C3 Furnace-Gas 77BTU-80%-3T-w/cabinet - - M1MB090ABW Furnace-Gas 90BTU-80%-3T-w/cabinet RG1D90C3 Furnace-Gas 90BTU-80%-3T-w/cabinet - - M1MB077ABW Furnace-Gas 77BTU-80%-4T-w/cabinet - - DGAA056 DGAA056BDTB FNGAS AI DF 56M BTU M1MB056ABW Furnace-Gas 56BTU-80%-4T-w/cabinet - - DGAA070 DGAA070BDTB FNGAS AI DF 70M BTU M1MB070ABW Furnace-Gas 70BTU-80%-4T-w/cabinet - - DGAA077 DGAA077BDTB FNGAS AI DF 77M BTU M1MB090ABW Furnace-Gas 90BTU-80%-4T-w/cabinet - - DGAA090 DGAA090BDTB FNGAS AI DF 90M BTU Note: Coil limitations may apply due to coil cavity height. Consult specs. Note: Coil limitations may apply due to coil height. Consult specs. 33 Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO.
CROSS REFERENCE CHART Old Maytag or Coleman to New Maytag Model Numbers Furnace Cross Reference Furnaces 80% Gas Downflow w/o Coil Cabinet Old Maytag SKU Old Maytag New Maytag SKU New Maytag Coleman (2015 and earlier) Coleman M1MBO56AAW Furnace-Gas 56BTU-80%-3T-w/o cabinet RG1D56N3 Furnace-Gas 56BTU-80%-3T-w/o cabinet DGAH056 DGAH056BBSA FNGAS AI DF 56M BTU M1MBO70AAW Furnace-Gas 70BTU-80%-3T-w/o cabinet RG1D70N3 Furnace-Gas 70BTU-80%-3T-w/o cabinet - - M1MBO77AAW Furnace-Gas 77BTU-80%-3T-w/o cabinet RG1D77N3 Furnace-Gas 77BTU-80%-3T-w/o cabinet DGAH077 DGAH077BBSA FNGAS AI DF77M BTU M1MBO90AAW Furnace-Gas 90BTU-80%-3T-w/o cabinet RG1D90N3 Furnace-Gas 90BTU-80%-3T-w/o cabinet - - M1MBO77AAW Furnace-Gas 77BTU-80%-4T-w/o cabinet RG1D77N3 Furnace-Gas 77BTU-80%-3T-w/o cabinet - - M1MBO56AAW Furnace-Gas 56BTU-80%-4T-w/o cabinet RG1D56N3 Furnace-Gas 56BTU-80%-3T-w/o cabinet - - M1MBO70AAW Furnace-Gas 70BTU-80%-4T-w/o cabinet RG1D70N3 Furnace-Gas 70BTU-80%-3T-w/o cabinet - - M1MBO90AAW Furnace-Gas 90BTU-80%-4T-w/o cabinet RG1D90N3 Furnace-Gas 90BTU-80%-3T-w/o cabinet - - Furnaces 95% Gas Downflow w/18 Coil Cabinet Old Maytag SKU Old Maytag New Maytag SKU New Maytag Revolv (2015 and earlier) M7RL045BW Furnace-Gas 45BTU-95%-4T-w/cabinet RG7D45C4 Furnace-Gas 45BTU-95%-4T-w/cabinet 08540005 VMC1-50D36N50BTU-95%-3.5T w/cabinet M7RL060BW Furnace-Gas 60BTU-95%-4T-w/cabinet RG7D60C4 Furnace-Gas 60BTU-95%-4T-w/cabinet - - M7RL072BW Furnace-Gas 72BTU-95%-4T-w/cabinet RG7D72C4 Furnace-Gas 72BTU-95%-4T-w/cabinet 08540006 VMC1-50D36N72BTU-95%-4T w/cabinet Note: Coil cabinet available to accomodate larger coils. Some coil Note: Coil cabinets available for A/C & H/P applications. size limitations may apply. Consult specs. before applying. Furnaces 95% Gas Downflow w/o Coil Cabinet Old Maytag SKU Old Maytag New Maytag SKU New Maytag Revolv (2015 and earlier) M7RL045AAW Furnace-Gas 45BTU-95%-4T-w/cabinet RG7D45N4 Furnace-Gas 45BTU-95%-4T-w/cabinet 08540003 VMA3-50D36N50BTU-95%-3.5T w/cabinet M7RL060AAW Furnace-Gas 60BTU-95%-4T-w/cabinet RG7D60N4 Furnace-Gas 60BTU-95%-4T-w/cabinet - - M7RL072AAW Furnace-Gas 72BTU-95%-4T-w/cabinet RG7D72N4 Furnace-Gas 72BTU-95%-4T-w/cabinet 08540004 VMA3-50D36N72BTU-95%-4T w/cabinet Note: Coil cabinet available to accomodate larger coils. Some coil Note: Coil cabinets available for A/C & H/P applications. size limitations may apply. Consult specs. before applying. Furnaces Oil Downflow w/18 Coil Cabinet Maytag SKUW Old Maytag New Maytag SKU New Maytag Coil SKU Coleman (2015 and earlier) Revolv (2015 and earlier) M5SB-066A-B FURNACE-OIL-66BTU-3T-W/CAB - - DFA066BDT* FURNACE-OIL-66BTU-3T-W/CAB M5SB-086A-B FURNACE-OIL-86BTU-3T-W/CAB - - DFA084BDT* FURNACE-OIL-86BTU-3T-W/CAB Note: Coil limitations may apply due to coil height. Consult specs. Registered Trademark/ Trademark of Maytag Properties, LLC or its related companies. Nortek Global HVAC, LLC 2016. All rights reserved. Manufactured under license by Nortek Global HVAC, LLC, O Fallon, MO. 34