Please indicate a colour code as final digit 0 = ecru 5 = lime-green 3 = rosé 9 = light-blue (z) Cot 70 x 40 cm AIRWELL -Comfort with 3 removable bars slatted bed base is adjustable to 4 different heights Dimensions: L / W / H in cm 44,0 / 75,8 / 79,9 3 394 0 (z) Junior bed Changing sides (2 pieces) to transform the cot into junior bed Dimensions: L / H / D in cm 39,0 / 8,4 /,8 Junior bed 70 x 40 cm 2 headboards, slatted bed base AIRWELL-Comfort, 2 bedsides, guard rail and protection side ecru 267 94 0 ecru 09 04 0 (z) Dimensions: L / W / H in cm 44,0 / 75,8 / 56, Mattresses for cots see page 36. Protection set Protection set 70 x 40 cm to transform the cot into a junior bed or children s sofa (low) ecru 29 980 0 (z) 2 bedsides, guard rail and protection side Dimensions: L 39,0 cm NOTE: Can only be used with beds of fabrication from 203 on (N art. 3...) Supplement of protection set Ladder ecru 29 98 0 8,6 cm from the bedside, D=93,8 cm (z) (z) Play tent in different colours see list below Dimensions: L / H / D in cm 77,0 / 37,0 / 75,0 Colours 00% cotton 9 440 * * Please indicate a colour code. N Colour Fabric 6 green/white 00% cotton 8 rosé/white 00% cotton 0 light-blue/white 00% cotton blackberry/white 00% cotton 3 kiwi green/taupe 00% cotton 32 taupe/anthracite 00% cotton 34 light-blue/anthracite 00% cotton 35 turqouise/white 00% cotton 37 anthracite/white 00% cotton 38 pastel green/white 00% cotton 39 pastel green/anthracite 00% cotton all fabrics are washable at 30 C (a) = assembled (v) = pre-assembled (z) = disassembled 3
Please indicate a colour code as final digit 0 = ecru 5 = lime-green 3 = rosé 9 = light-blue Chest of drawers 2 drawers, ecru 2 drawers, coloured 09,9 / 95,8 / 55,9 67 554 /_ (v) Drawer insert with utensil tray piece fits in a drawer 26 990 0 (v) Changing board 2 doors, ecru shelf 09,9 / 95,8 / 55,9 Closed at rear side. 09,9 / 2,5 (9,8) / 79,4 surface for changing: W 84,6 / D 76,7 cm 67 504 0 67 74 0 (z) Changing board pillow see page 32. Bedside table shelf 2 drawers, ecru 67 584 0 (a) 49,5 / 58,3 / 40,2 (z) Wall shelf Shelf for chest of drawers shelf 4 hooks 97,9 / 20,0 / 2,8 67 704 0 2 shelves 67 604 0 09,9 / 03,5 / 39,9 (v) 4 (a) = assembled (v) = pre-assembled (z) = disassembled
Please indicate a colour code as final digit 0 = ecru 5 = lime-green 3 = rosé 9 = light-blue Lowboard 3 compartments 67 74 0 (a) 4, / 40,6 / 40,2 Seat cushion see page 322. Shelves 4 shelves 67 624 0 53,7 / 98,8 / 38,0 (v) 3 shelves 67 64 0 48,3 / 54,3 / 39,9 (v) (a) = assembled (v) = pre-assembled (z) = disassembled 5
Please indicate a colour code as final digit 0 = ecru 5 = lime-green 3 = rosé 9 = light-blue Shelf 9 compartments 9 compartments 67 694 0 4, / 23,8 / 40,2 (v) Desk ecru 6 750 0 (v) 30,0 / 72,8 / 60,0 Wardrobe 2D2D 2 doors, ecru 2 drawers, coloured separation 3 shelves 2 clothes rails 67 04 /_ 09,9 / 99,2 / 55,9 (v) additional board 267 630 0 52,4 /,6 / 5,5 Laundry compartment divider can be mounted behind the left and right door, right only in combination with 2 shelves (267 630 0) Drawer set 2D behind left or right door with 2 drawers and utensil tray Drawer insert with utensil tray piece fits in a drawer Knob set (Set of 4) a knob in light yellow, dark yellow, white, taupe Knob set 2 (Set of 4) a knob in light-blue, dark blue, white, taupe ecru 26 995 7 ecru 26 990 26 990 0 26 999 6 26 999 7 LED light "Lucky Lite" operated with rechargeable batteries (by USB-A), for mounting in wardrobes, with integrated motion detector 209 00 9 6 (a) = assembled (v) = pre-assembled (z) = disassembled
Please indicate a colour code as final digit 0 = ecru 5 = lime-green 3 = rosé 9 = light-blue Wardrobe 3D2D 3 doors 2 drawers, coloured 2 separations 6 shelves 2 clothes rails 63,9 / 99,2 / 55,9 67 034 /_ (v) additional board 267 630 0 52,4 /,6 / 5,5 Laundry compartment divider can be mounted behind the left, middle and right door, right only in combination with 2 shelves (267 630 0) ecru 26 995 7 Drawer set 2D behind left, middle or right door with 2 drawers and utensil tray Drawer insert with utensil tray piece fits in a drawer ecru 26 990 26 990 0 Knob set (Set of 4) a knob in light yellow, dark yellow, white, taupe Knob set 2 (Set of 4) a knob in light-blue, dark blue, white, taupe LED light "Lucky Lite" operated with rechargeable batteries (by USB-A), for mounting in wardrobes, with integrated motion detector 26 999 6 26 999 7 209 00 9 Corner wardrobe 2 doors 2 drawers, coloured 2 separations 6 shelves 2 clothes rails 6,5 / 99,0 / 6,5 Depth of side 38,0 cm 67 054 /_ (v) Drawer insert with utensil tray piece fits in a drawer Knob set (Set of 4) a knob in light yellow, dark yellow, white, taupe Knob set 2 (Set of 4) a knob in light-blue, dark blue, white, taupe LED light "Lucky Lite" operated with rechargeable batteries (by USB-A), for mounting in wardrobes, with integrated motion detector 26 990 0 26 999 6 26 999 7 209 00 9 (a) = assembled (v) = pre-assembled (z) = disassembled 7
(a) Bedside table shelf 2 drawers, ecru 49,5 / 58,3 / 40,2 67 584 0 Youth bed surface: 90 x 200 cm 67 84 0 (z) Dimensions: L / W / H in cm 26,6 / 95,7 / 73,4 Dimensions: L / W / H in cm 26,6 / 05,7 / 73,4 Dimensions: L / W / H in cm 26,6 / 25,7 / 73,4 Dimensions: L / W / H in cm 26,6 / 45,7 / 73,4 00 x 200 cm 67 924 0 20 x 200 cm 67 934 0 40 x 200 cm 67 944 0, as regards construction we recommend using the slatted bed bases described on the right. Slatted bed bases see next page. Bedding boxes see page 9. Back cushions see page 285. 8 (a) = assembled (v) = pre-assembled (z) = disassembled
Slatted bed base Standard, fix solid wood 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight (a) 90 x 200 cm 83 040 0 00 x 200 cm 83 00 0 20 x 200 cm 83 20 0 40 x 200 cm 83 40 0 Slatted bed base Comfort, fix solid wood 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight (a) 90 x 200 cm 83 050 0 00 x 200 cm 83 0 0 20 x 200 cm 83 2 0 40 x 200 cm 83 4 0 Slatted bed base Comfort, adjustable Catch fittings for adjustment of the head and foot sections 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight solid wood Note: You cannot use the adjustable mattress support for play, high, bunk or cabin beds. (a) 90 x 200 cm 83 055 0 00 x 200 cm 83 05 0 20 x 200 cm 83 25 0 40 x 200 cm 83 45 0 (a) = assembled (v) = pre-assembled (z) = disassembled 9
Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. NOTE: All play, high and bunk beds can also be mounted inversaly. Bed Bedposts = 5,2 x 5,2 cm headboards + bedsides 20,4 / 95,7 / 59,5 Can be transformed into play, high and bunk bed see list of conversion possibilities 67 80 0 Fabrics see from page 293. LED lamp "TWIST" see page 288. Protection side Protection side (rear) 200,0 / 2,2 / 5,6 267 00 0 Guard rail mountable on left or right side Guard rail + support 56,0 / 2,2 / 5,6 267 0 0 Ladder mountable on left or right side Note: Only in combination with the guard rail 267 0 0! 267 690 0 9,2 cm from the bedside, W=4,3 cm Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight 0
Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. Height 25 cm (bedposts) Play bed with grip ladder, slanting headboards + bedsides + protection sides + ladder 67 840 0 20,4 / 34,9 / 23,5 LED lamp "TWIST" see page 288. with grip ladder, straight headboards + bedsides + protection sides + ladder 67 842 0 20,4 / 04, / 23,5 Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight Furniture is disassembled.
Height 25 cm (bedposts) Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. Play bed with slide with grip ladder, slanting headboards + bedsides + protection sides + ladder + slide 67 850 0 20,4 / 236,2 / 49,7 NOTE: Slide plate in wood imitation LED lamp "TWIST" see page 288. with grip ladder, straight headboards + bedsides + protection sides + ladder + slide 67 852 0 20,4 / 236,2 / 49,7 NOTE: Slide plate in wood imitation Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight 2 Furniture is disassembled.
Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. Height 55 cm (bedposts) Play bed with grip ladder, slanting headboards + bedsides + protection sides + ladder 67 847 0 20,4 / 44,2 / 54, LED lamp "TWIST" see page 288. with grip ladder, straight headboards + bedsides + protection sides + ladder 67 849 0 20,4 / 04, / 54, Corner bunk bed Corner bunk beds can be put together from the desired high bed and a bed. Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight Furniture is disassembled. 3
Height 55 cm (bedposts) Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. Bunk bed with grip ladder, slanting headboards + bedsides + protection sides + ladder 67 827 0 20,4 / 44,2 / 54, The bunk bed can be transformed into two single beds. LED lamp "TWIST" see page 288. with grip ladder, straight headboards + bedsides + protection sides + ladder 67 829 0 20,4 / 04, / 54, The bunk bed can be transformed into two single beds. Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight 4 Furniture is disassembled.
Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. Height 83 cm (bedposts) High bed with grip ladder, slanting headboards + bedsides + protection sides + ladder 67 830 0 20,4 / 53,4 / 82,0 LED lamp "TWIST" see page 288. with grip ladder, straight headboards + bedsides + protection sides + ladder 67 832 0 20,4 / 04, / 82,0 Corner bunk bed Corner bunk beds can be put together from the desired high bed and a bed. Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight Furniture is disassembled. 5
Height 83 cm (bedposts) Note: The safety of the play, high and bunk beds according to DIN EN 747 is only guaranteed with the use of the PAIDI slatted bed base. Do not use a mattress which is higher than 5 cm. Bunk bed with grip ladder, slanting headboards + bedsides + protection sides + ladder 67 820 0 20,4 / 53,4 / 82,0 The bunk bed can be transformed into two single beds. LED lamp "TWIST" see page 288. with grip ladder, straight headboards + bedsides + protection sides + ladder 67 822 0 20,4 / 04, / 82,0 The bunk bed can be transformed into two single beds. Accessories see on pages 7 23. Mattresses, curtains, tents and other fabrics see from page 293. Slatted bed base for all beds, play, high and bunk beds STANDARD 90 x 200 cm solid wood 83 040 0 6 multi-glued wooden slats, fixed in plastic slat holders, middle belt for distributing the body weight COMFORT COMFORT 90 x 200 cm solid wood 83 050 0 28 multi-glued wooden slats, fixed in flexible rotating bearings, 5 double slats for strengthening the central part, middle belt for distributing the body weight 6 Furniture is disassembled.
Supplements for all heights Protection board enhanced for long side for play, high and bunk beds and corner bunk beds 267 2 0 2,0 / 2,2 / 5,6 for long and short side for play, high and bunk beds and corner bunk beds 267 5 0 85,0 / 2,2 / 5,6 LED lamp "TWIST" see page 288. Bed guard all around with one entry for play, high und bunk beds 267 600 0 95 20,4 / 95,7 / 22,4 with two entries for play beds 267 60 0 20,4 / 95,7 / 22,4 Furniture is disassembled. 7
Supplements for all heights Fall out protection Bed guard for fixing in the ladder or slide entry, for beds, play, high and bunk beds 267 605 0 Dimensions: L / H / D in cm 40,0 / 5,6 / 2,0 fixed in the ladder entry fixed in the slide entry NOTE! The fall out protection only protects children against falling out. It cannot prevent children from climbing over the enhanced protection device. Security-set silver, luminescent 4 silver, luminescent caps and 5 self-adhesive anti-slip-stripes for ladder steps (for all heights) for play, high and bunk beds 267 609 0 8 Furniture is disassembled.
Pull-out Bed FLOYD stable, lacquered metalframe with front cover in ecru, universal castors are included, can be pulled out with a belt, a gas pressure spring mechanism helps to place the bed in a slip resistant position. For beds and bunk beds Mattress size 90 x 90 x approx.,5 cm Mattresses for the pull-out bed "FLOYD" see "youth mattresses" on page 39. Only mattresses with a thickness of max.,5 cm can be used. STANDARD surface 90 x 90 cm with 3 wooden slats, glued in several layers - the wooden slats are mounted on plastic supports Height with mattress (,5 cm) approx.: H 4,5 cm 67 888 0 COMFORT surface 90 x 90 cm 67 788 0 with 24 wooden slats, glued in several layers - the wooden slats are mounted on plastic supports, centric adjustment of temper Dimensions: L / W / H in cm 98,0 / 92,2 / 40, ½ Bedding box with castors (for soft floors) for beds and bunk beds (2 pieces are possible) 67 880 0 (price for piece) Dimensions: L / W / H in cm (incl. castors) 9,0 / 94,6 / 7, Castors for bedding box for hard floors 20 040 0 ¾ Bedding box with castors (for soft floors) for beds and bunk beds incl. board for bedside 67 885 0 Dimensions: L / W / H in cm (incl. castors) 50,0 / 94,6 / 7, Castors for bedding box for hard floors 20 040 0 Trundle bed surface 90 x 90 cm with castors (for soft floors) for beds and bunk beds mattress size 90 x 90 x approx.,5 cm 67 88 0 Dimensions: L / W / H in cm (incl. castors) 98,0 / 94,6 / 7, Castors for bedding box for hard floors 20 040 0 Mattresses for the trundle bed see "youth mattresses" on page 39. The mattress can only be placed on the bottom of the trundle bed. Furniture is disassembled. 9
Supplements for all heights Shelf board for beds, play, high and bunk beds 267 200 0 85,0 / 20,0 / 5,0 Shelf 6 compartments with foot slider, can be placed between the headboards and also under a play bed 25 with curtain attachment set 83,9 / 40,0 / 79,7 267 230 0 S-Hooks metal, lacquered Set of 2 silver 243 952 9 white 220 952 for beds, play, high and bunk beds 20 Furniture is disassembled.
Supplements for all heights Basketball-set Set of board, basket and soft ball 24 50 3 for attaching to play, high and bunk beds Dimensions: L / H / D in cm 50,0 / 40,0 / 37,0 Softball foam Diameter = 20 cm yellow 24 95 0 Canopy for bed only for the bed - 67 80 0 20,4 / 95,7 / 28,0 267 60 0 total height with bed approx.: H 87.5 cm Canopy for play bed 25 and bed Fabrics for canopies see from page 293. only for play beds 25 67 840 0 + 67 842 0 + 67 850 0 + 67 852 0 and for the bed - 67 80 0 267 6 0 20,4 / 95,7 / 7,0 total height with play bed approx.: H 94.5 cm total height with bed approx.: H 30.5 cm Note: For canopies 267 60 0 and 267 6 0 the curtain attachment sets are not necessary. Furniture is disassembled. 2
Supplements for all heights Punch and Judy show / Toy shop can be used as punch and judy show or also as child s toy shop 267 720 0* for play, high and bunk beds Dimensions: L / H / D in cm 85,0 / 22,5 / 20,0 Colours * Please indicate a colour code. NOTE: We recommend using the punch and judy show/ toy shop only for play beds of a height of 25 cm. N Colour Fabric 6 green/white 00% cotton 8 rosé/white 00% cotton 0 light-blue/white 00% cotton blackberry/white 00% cotton 3 kiwi green/taupe 00% cotton 32 taupe/anthracite 00% cotton 34 light-blue/anthracite 00% cotton 35 turqouise/white 00% cotton 37 anthracite/white 00% cotton 38 pastel green/white 00% cotton 39 pastel green/anthracite 00% cotton all fabrics are washable at 30 C Writing board writable on with chalk, magnetic board, backside with pinboard, tray for the chalk, 2 boards 267 730 0 for play, high and bunk beds Dimensions: L / H / D in cm 85,0 / 22,5 / 20,0 22 Furniture is disassembled.
Supplements for all heights Climbing ladder with 4 steps Dimensions approx.: H / W / D in cm 3,3 / 74,0 / 9,0 (37,2) for height 25 267 770 0 with 5 steps for height 55 267 77 0 Dimensions approx.: H / W / D in cm 43.9 / 74.0 / 9.0 (46.9) for height 83 Can be mounted on the long or short side. Recommendation! It should be used a play mat under the climbing ladder. Play mat Cover: 00% cotton 58 740 0* removable and washable at 30 C, Filling: foam core (approx. 30kg/m³) 20,0 / 70,0 / 6,0 Colours * Please indicate a colour code. N Colour Fabric 6 green/white 00% cotton 8 rosé/white 00% cotton 0 light-blue/white 00% cotton blackberry/white 00% cotton 3 kiwi green/taupe 00% cotton 32 taupe/anthracite 00% cotton 34 light-blue/anthracite 00% cotton 35 turqouise/white 00% cotton 37 anthracite/white 00% cotton 38 pastel green/white 00% cotton 39 pastel green/anthracite 00% cotton all fabrics are washable at 30 C Furniture is disassembled. 23