High Mast Series HMAO HMSC
HOLOPHANE HMAO Series High Mast Series HOLOPHANE HIGH MAST LIGHTING SERIES PROVIDES SUPERIOR BENEFITS FOR ILLUMINATING LARGE AREAS. THE OPTIMIZED LIGHT CONTROL PROVIDED BY THE HMAO AND HMSC LUMINAIRES CAN BE UTILIZED IN A VARIETY OF APPLICATIONS. WHEN INCORPORATED WITH HOLOPHANE LOWERING DEVICES, THE SYSTEM PROVIDES FOR FEWER LUMINAIRES AND POLES RESULTING IN REDUCED ENERGY REQUIREMENTS AND MAINTENANCE COSTS OVER THE LIFE OF THE INSTALLATION. 2 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING HMSC Series Features and Benefits O Precise reflector design and highly efficient lighting qualifies for IESNA Cutoff and Full Cutoff classifications O Superior optical performance and maximized pole spacing reduces energy costs O Open ventilated design minimizes dirt depreciation O Unitized quick disconnect assembly and tool-free lamp replacement allows for ease of maintenance Typical Applications O Infrastructure Highways and Roadways Interchanges Toll Plazas O Large Area Ports Rail and Container Yards Parking Areas Truck Stops O Outdoor Facilities Correctional Facilities Airports Security Lighting Sports Lighting HOLOPHANE INFRASTRUCTURE High Mast Series 3
HOLOPHANE HMAO Series THE HIGH MAST ADVANCED OPTIX (HMAO) SERIES OF LUMINAIRES UTILIZE A SUPERIOR OPTICAL SYSTEM THAT PROVIDES A VARIETY OF LIGHTING DISTRIBUTIONS, INCLUDING IESNA CUTOFF AND FULL CUTOFF VERSIONS. THIS LUMINAIRE IS AN EFFECTIVE LIGHTING SOLUTION IN AREAS WHERE LIGHT TRESPASS AND LIGHT POLLUTION ARE A CONCERN TO THE ENVIRONMENT. 4 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING Weathertight Design Ballast Assembly and Die-cast Aluminum Housing Sealed Optical Assembly Terminal Block and Slipfitter Bracket Weather Shield Spun Aluminum Cover Lamp Support and a Variety of Lamp Positions Reflective Specular Panels Refractor Assembly Weathertight Design for UL wet location listed. Terminal Block provides for positive lead connection and is pre-wired to the quick disconnect. Spun Aluminum Cover hermetically sealed for protection from contaminants Reflector/Refractor Optics available in a variety of lighting distributions and cutoff options Ballast Assembly is UL listed for 40 C ambient and provides extended ballast and capacitor life. Quick Disconnect is provided for fast installation and removal Adjustable Slipfitter Bracket entry is designed for 51mm (2") nominal pipe and permits a vertical positioning adjustment of ±3. HOLOPHANE INFRASTRUCTURE High Mast Series 5
HOLOPHANE Applications THE HMAO SERIES IS DESIGNED FOR LIGHTING LARGE AREAS SUCH AS ROADWAYS, PORT FACILITIES, AIRPORTS, WATER TREATMENT PLANTS, PARKING LOTS, RAIL YARDS AND STORAGE AREAS. THE HIGH PERFORMANCE OPTICAL ASSEMBLY PROVIDES HIGH VERTICAL ILLUMINATION WHICH IMPROVES VISIBILITY AND SAFETY AS WELL AS REDUCING THE NUMBER OF POLES REQUIRED IN ALL APPLICATIONS. 6 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING HOLOPHANE INFRASTRUCTURE High Mast Series 7
HOLOPHANE Ordering Information Dimensional Details J Optics Maximum Weight: 37.5 kg (79 lbs) Maximum E.P.A.: 1.34 sq. ft. L Optics Maximum Weight: 41.7 kg (92 lbs) Maximum E.P.A.: 1.78 sq. ft. R Optics Maximum Weight: 39.2 kg (88 lbs) Maximum E.P.A.: 1.72 sq. ft. S Optics Maximum Weight: 34.5 kg (76 lbs) Maximum E.P.A.: 1.34 sq. ft. Performance Specifications Housing The housing shall be die cast aluminum, and finished with polyester powder paint. The bracket arm clamp shall attach to a 51mm (2") nominal schedule 40 pipe and allow for ±3 adjustment for leveling the luminaire. A stainless steel lamp clamp lined with woven glass cloth shall be attached to the reflector housing assembly for standard 1000 watt HID lamps. The fixture shall pass a vibration fatigue test per ANSI standards for Roadway Lighting Equipment - Luminaire Vibration. Distributions HMAO S Optic Ballast The ballasts shall be copper wound with power factor 90%, and have a published ballast factor of 1 to ensure full output of the lamp. All ballast components shall be completely removable as a unitized quick disconnect assembly for maintenance. A terminal block shall be provided to simplify wiring and provide positive electrical connections. A protected starter, if specified, shall sense an inoperative or missing HPS lamp and automatically shut down to prevent runaway operation, shortened life, and damage to secondary ballast windings. Optical Assembly The optical assembly consists of highly specular enhanced aluminum panels hermetically sealed between a spun aluminum cover, an open ventilated borosilicate glass piece, and/or a prismatic refractor or an internal reflector system. The exposed smooth glass inner surface shall be continuously cleaned by the chimney effect of flow through air and subject to no permanent deterioration. The lamp shall be operated in the vertical position for maximum life and lumen maintenance. There shall be no glass bottom enclosure to scatter light above the horizon, to collect dirt or to reduce luminaire efficiency. The luminaire dirt depreciation shall be less than 5% (LDD 0.95). HMAO L Optic UL Listing Fixture shall be UL listed for wet locations, UL/CUL listed for 40 C. 8 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING Preferred Selections: Most Frequently Ordered Catalog Numbers HMAO 1 LUMINAIRE 400HP 2 WATTAGE 48 3 VOLTAGE R 4 OPTICS 7 5 BEAM ANGLE R 6 OPTIONS LAMP 7 ACCESSORIES HMAO 400HP C10HP 48 MT J L R S 7 9 R LAMP Catalog Numbers for Entire Product Offering (Pricing and lead times may be affected) STEP 1: LUMINAIRE STEP 4: OPTICS STEP 6: OPTIONS HMAO High Mast Advanced Optix J Asymmetric reflector Factory Installed. Series L Asymmetric refractor FD1 1 Single fuse disconnect assembly R Symmetric refractor FD2 STEP 2: Double fuse disconnect assembly SOURCE AND WATTAGE S Symmetric reflector PS Protected starter for HPS HIGH PRESSURE SODIUM R 3 Photocontrol receptacle (NEMA Mogul Base type) 400HP 1 400W HPS 1 For 120, 240, 277 and 347V 40RHP 1 400W HPS, mag reg 2 For 208, 240 and 480V 750HP 1 750W HPS 3 Not available with MT voltage C10HP 1, 3 1000W HPS J S STEP 8: ACCESSORIES CP1HP 1, 3 1000W HPS, compact lamp Ships Separately. METAL HALIDE Mogul Base F1 Single fuse assembly for 120, 240, 277 or 347V 400MP 2 400W MH, protected F2 Double fuse assembly for 208, 400PP 2 400W MH, pulse start, 240 or 480V protected R L LAMP Appropriate HID lamp supplied C10MP 1000W MH, protected PS-100 Replacement protected starter for wattage 400 or more PS-1000 Replacement protected starter for wattage 1000 1 Mogul base lamp 2 Protected sockets, open fixture rated lamps only 3 105 C supply wire required on all 1000W HPS units STEP 3: VOLTAGE 08 1 208V 12 120V 20 208V 24 240V 27 277V 34 347V 40 1 240V 48 480V MT 2 Multi-voltage 1 Isolated secondary 2 120, 208, 240, and 277V only. Not available with 40RHP or 750HP STEP 5: BEAM ANGLE 7 Low 9 High L Optic Only 0 2 Non cutoff 1 3 Low, semi-cutoff 2 4 High, semi-cutoff 1 Available with C10HP, CP1HP and C10MP wattage only 2 Available with 400HP, 750HP, CP1HP and C10MP wattage only 3 Available with 750HP wattage only SHIELDS SD-395-90 1 90 shield SD-395-120 1 120 shield SD-395-180 1 180 shield 1 Available with S optic only HOLOPHANE INFRASTRUCTURE High Mast Series 9
HOLOPHANE HMSC Cutoff Series THE HIGH MAST CUTOFF (HMSC) LUMINAIRE PRODUCES SEVEN, HIGHLY EFFECTIVE LIGHT PATTERNS THAT ENABLE FEWER POLES TO BE USED WHILE PROVIDING A LIGHTING SOLUTION THAT RESEMBLES NATURAL DAYLIGHT FOR INCREASED VISIBILITY. THIS LUMINAIRE IN COMBINATION WITH A HOLOPHANE LOWERING DEVICE SYSTEM WITH THE TOOL-FREE LAMP REPLACEMENT AND TERMINAL BLOCK WIRING FROM GROUND LEVEL, ALL RESULTING IN A LOWER COST MAINTENANCE OVER THE LIFE OF PRODUCT. 10 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING Weathertight Design Terminal Block Ballast Assembly and Die-cast Aluminum Housing Spun Aluminum Cover Lamp Support Variety of Lamp Positions Refractor Assembly Weathertight Design for UL wet location listed. Terminal Block provides for positive lead connection and is pre-wired to the quick disconnect. Reflector/Refractor Optics available in a variety of lighting distributions and cutoff options Ballast Assembly is UL listed for 40 C ambient and provides extended ballast and capacitor life. Quick Disconnect is provided for fast installation and removal Adjustable Slipfitter Bracket entry is designed for 51mm (2") nominal pipe and permits a vertical positioning adjustment of ±3. HOLOPHANE INFRASTRUCTURE High Mast Series 11
HOLOPHANE Applications THE HMSC LUMINAIRES PROVIDE SUPERIOR BENEFITS FOR LIGHTING ROADWAYS, INTERCHANGES AND A VARIETY OF LARGE AREAS. MOTORISTS NEED THE FULL PANORAMIC VIEW PROVIDED BY OUR HIGH MAST LUMINAIRES TO SAFELY ACCESS DRIVING CONDITIONS. THE UNIFORMITY OF VERTICAL AND HORIZONTAL LIGHTING ENHANCES NIGHTTIME SECURITY AT PRISONS AND HELPS PROTECT VITAL EQUIPMENT IN FREIGHT TERMINALS, AND RAIL YARDS. 12 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING HOLOPHANE INFRASTRUCTURE High Mast Series 13
HOLOPHANE Ordering Information Dimensional Details A/B - Asymmetric Optics Maximum Weight: 27 kg. (60 lbs.) Maximum EPA:1.56 Sq. Cover 4.35 Cyl. Cover 2.62 C - Symmetric Optics Maximum Weight: 27 kg. (60 lbs.) Maximum EPA:1.56 Sq. Cover 4.35 Cyl. Cover 2.62 Performance Specifications Distributions Ballast Housing The ballast and lamp housings shall be die cast of low copper content aluminum alloy. The castings shall be subjected to a 7-stage pretreatment cleaning prior to being finished with an electrostatically applied and baked on polyester powder coat paint. The bracket arm clamp shall attach to a 51mm (2 ) nominal pipe and allow for +/-3 adjustment for leveling the luminaire. A porcelain-enclosed socket with a nickel-plated grip screw shell provides lamp support. A stainless steel lamp clamp lined with woven glass cloth shall be provided for standard 1000 watt HID lamps. The fixture shall pass a vibration fatigue test simulating a minimum 1-g peak acceleration. Type II Cutoff, Asymmetric Ballast The ballast shall be copper wound with a power factor over 90%. It shall have a published ballast factor of 1 to ensure full lamp output. All ballast components shall be completely removable as a unitized assembly. All ballasts shall provide starting temperatures to -40 F. Quick disconnects and a terminal block shall be provided to simplify wiring and provide positive electrical connections. A protected starter, if specified, shall sense an inoperative or missing HPS lamp and automatically shut down to prevent damage to the ballast windings. Type V Cutoff, Symmetric Optics The HMSC optical assembly shall consist of formed aluminum reflectors with anodized finish. The IESNA cutoff symmetric distribution reflectors are spun and fluted. The IESNA cutoff asymmetric distribution reflectors are hydro formed and housed in a spun aluminum cover. All optical systems are enclosed with a clear drop borosilicate glass lens in a gasketed doorframe. The doorframe includes four stainless steel latches and a hinge for re-lamping. UL Listing Fixture shall be UL listed for wet locations, UL/CUL listed for 40 C. 14 HOLOPHANE INFRASTRUCTURE High Mast Series
OUTDOOR LIGHTING Preferred Selections: Most Frequently Ordered Catalog Numbers HMSC 1 LUMINAIRE 400HP 2 WATTAGE 48 3 VOLTAGE C 4 OPTICS 8 5 BEAM ANGLE R 6 OPTIONS LAMP 7 ACCESSORIES HMSC 400HP C10HP 48 MT A B C 7 8 9 R LAMP Catalog Numbers for Entire Product Offering (Pricing and lead times may be affected) STEP 1: LUMINAIRE STEP 4: OPTICS HMSC High Mast System Cutoff A 1 Narrow asymmetric B 1 Wide asymmetric C Symmetric STEP 2: SOURCE AND WATTAGE HIGH PRESSURE SODIUM 400HP 1 400W HPS 40RHP 1 400W HPS, mag reg 750HP 1 750W HPS C10HP 1, 2 1000W HPS A/B C METAL HALIDE 400PM 400W MH, pulse start C10MH 1 1000W MH STEP 5: BEAM ANGLE 1 Mogul base lamp 2 105 C supply wire required on all 1000W 7 Low HPS units 8 Medium 9 High STEP 3: VOLTAGE 08 1 208V 12 120V 20 208V 24 240V 27 277V 34 347V 40 1 240V 48 480V 1 Isolated secondary 2 120, 208, 240, and 277V only. Not available with 40RHP or 750HP STEP 6: OPTIONS Factory Installed. FD1 1 Single fuse disconnect assembly FD2 2 Double fuse disconnect assembly PS Protected starter for HPS R Photocontrol receptacle (NEMA type) 1 For 120, 240, 277 and 347V 2 For 208, 240 and 480V STEP 8: ACCESSORIES Ships Separately. F1 Single fuse assembly for 120, 240, 277 or 347V F2 Double fuse assembly for 208, 240 or 480V J 1 Cylindrical cover, black L 1 Cylindrical cover, bronze M 1 Square cover, black N 1 Square cover, bronze LAMP Appropriate HID lamp PS-100 supplied Replacement protected starter for wattage 400 or more PS-1000 Replacement protected starter for wattage 1000 HOLOPHANE INFRASTRUCTURE High Mast Series 15
Acuity Brands Lighting, Inc. Holophane Headquarters, 3825 Columbus Road, Granville, OH 43023 Holophane Canada, Inc. 9040 Leslie Street, Suite 208, Richmond Hill, ON L4B 3M4 Holophane Europe Limited, Bond Ave., Milton Keynes MK1 1JG, England Holophane, S.A. de C.V., Apartado Postal No. 986, Naucalpan de Juarez, 53000 Edo. de Mexico Contact your local Holophane factory sales representative for application assistance, and computer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at 740-345-9631. In Canada call 905-707-5830 or fax 905-707-5695. Limited Warranty and Limitation of Liability Refer to the Holophane limited material warranty and limitation of liability on this product, which are published in the Terms and Conditions section of the current Buyers Guide, and is available from your local Holophane sales representative. Visit our web site at ww.holophane.com HL-2396 12/08 2008 Acuity Brands Lighting, Inc Luminaires may utilize fluorescent or high intensity discharge sources that contain small amounts of mercury. New disposal labeling for these lamps includes the mercury identifier shown on the left to indicate that the lamp contains mercury and should be disposed of in accordance with local requirements. Information sources regarding lamp recycling and disposal are included on the packaging of most mercury-containing lamps and also can be located at www.lamprecycle.org. Product specifications may change without notice. Please contact your local Holophane factory sales representative for the latest product information. Cert no. SW-COC-002658 Buying products with the FSC label supports the growth of responsible forest management worldwide. The eco savings in the production of this brochure: 2.72 trees preserved for the future 7.85 lbs waterborne waste not created 1,155 gallons wastewater flow saved 128 lbs solid waste not generated 10% 252 lbs net greenhouse gases prevented 1,926,610 BTUs energy not consumed Printed in USA