Gamma 263 Functionality and economy ideally combined
THE WAY TO MAKE IT AFFORDABLE Although compact in size, this fully automatic crimping machine combines simplicity and functionality with economy and process reliability to deliver a high piece output. It is a real hit when it comes to obtaining excellent value for the money. Whether you opt for the roller or belt drive, you can adjust the use of this device to your individual needs and be doing so yourself in no time at all. Area of application The Gamma 263 is designed for one and two-sided crimping and for one-sided seal loading. The new wire transport system ensures gentle processing of varying conductors with cross-sections ranging from 0.13 mm² to 4mm² (AWG26 AWG12). The best possible processing is guaranteed with roller or belt drive.
Technology You can process the entire cross-section range quickly, reliably and flawlessly using programmable, highly dynamic AC servo drives. Proven Komax quality monitoring systems are integrated. A second integrated encoder ensures maximum length and repetition accuracy for stripping and wire length. Compact and user friendly In spite of its compactness, this model ensures that all processing stations are highly accessible. Fitted with safety covers that open vertically, the modules are readily accessible from all sides. All controls are modules are arranged in a neat and orderly manner. The new touch screen control based on the TopWin graphical user interface is designed for fast and easy equipment operation. The layout is logical and easy to understand so user training can be kept quite short. Touch screen control Gamma 263
The optional WPCS (Wire Processing Communication Standard) interface allows Komax machines to be networked and easily integrated into existing production processes. Optional feeding system For the Gamma 263 Fast changeover From roller to belt drive or reverse Your benefits Small investment for high production output with reliable, well known processes Belt or roller drive in one machine for gentle wire handling Well known and proven crimping press technology on all Komax machines with CFA/CFA+ Compact and user friendly on smallest floor space Highly ergonomic thanks to the touch screen control
Application sample Gamma 263 Cutting Half strip Full strip Intermediate strip / Intermediate slitting Crimping Seal insertion Split cycle for closed barrel Double sheath cables Cut pulled strands / Precision cut Hot stamp marking Ink-Jet marking Options and Accessories Feeding systems Marking systems Wire infeed Prefeeder with belt drive or roller drive Komax 26 hot stamp marking Komax Inkjet marking system IMS Roller drive Belt drive Processing modules Crimping module mci 712 Crimping module mci 722 (with programmed crimp heights) Seal loading module mci 765 C (with seal position monitoring SPM) Quality control Integrated crimp height measurement Integrated pull-off force measurement Crimp force analyzer CFA/CFA+ Wire length correction Splice check Deposit systems Basic module 2m (78.7in.) or 4m (157.5in.) Extension module 2m (78.7in.) or 4m (157.5in.) With or without automatic batch sorting Accessories Barcodescanner PM8300 Tool changer Software: Networking WPCS Data conversion TopConvert Production control center KomaxCAO Towerlight Magnifying glass UPS
Machine layout Gamma 263 3280mm (129in.) Heigth with cover closed: 1610mm (63.4in.) Height with cover open: 2430mm (95.7in.) Reference values for piece output of Gamma 263 Pieces/h 5000 1070mm (42.1in.) CC. Gamma 263 0320030 Version 1 Subject to change /gu Made in Switzerland 4000 3000 2000 1000 0 500 1000 1500 2000 2500 3000 3500 4000 Wire length [mm] Conductor AVSS 0.50mm 2 (AWG18) Pneumatic pressure 6 bar (87psi) Speed 100% Acceleration 100% Crimping module mci 712 Crimp force analysis active Seal loading module mci 765 C Seal position monitoring active Technical data Length range Length accuracy Stripping lengths Stripping lengths with partial strip Wire cross-sections* Wire infeed speed Noise level Electrical connection 40mm 20000mm (1.75in. 65.6ft.) Repeat accuracy: ±(0.2% +1.0mm (0.04in.)) 0.1mm 20mm (0.004in. 0.79in.) 1mm 30mm (0.04in. 1.18in.) 0.13mm 2 4mm 2 (AWG26 AWG12) max. 6m/s (19.7ft/s) <75dB (no crimping module) 3 208 400V / 50 60Hz 5kVA More information about our products: www.komaxwire.com Pneumatic system Weight 5 8bar (73 116psi) 3m 3 /h (106ft 3 /h) approx. 870kg (1918lb.) * Extremely hard and tough wires may not be able to be processed even if they are within the above cross section range. If you are in doubt about your wires, we are happy to process samples of them. Komax Wire is a division of Komax Holding AG, Switzerland. THE WAY TO MAKE IT