Cr.22 WIRE PROCESSING MACHINE FEATURES. Convenient Tool Cart Solution reduces set-up time and improves throughput
|
|
- Lucy Williamson
- 6 years ago
- Views:
Transcription
1 The first name in wire processing Cr.22 WIRE PROCESSING MACHINE FEATURES Convenient Tool Cart Solution reduces set-up time and improves throughput Up to four processing stations for a wide range of applications A second control station at the wire in-feed allows access to PC program, reducing operator movements during set-up
2 Cr.22 WIRE PROCESSING MACHINE WE PROCESS THE WIDEST RANGE OF WIRE BAR NONE Built on the same platform as our popular Cr.11, the Cr.22 offers up to four processing stations for a wider range of end of wire applications including crimping, weather seal application, wire end twisting and wire tinning. Like the Cr.11, the digital servo driven Cr.22 offers unique set-up features designed to shorten the machine set-up time, allowing for processing in both large batch, and high mix/low lot size environments. LOOK AT ALL THE Cr.22 HAS TO OFFER Standard Servo Driven Terminating Units Our TU-12 Terminating Unit features programmable stroke and split cycle operation for the broadest application range Intelligent software optimizes speed by automatically coordinating the crimping cycle with wire placement Optional TU-12 HD version available for the most demanding crimping needs Optional Loose Weather Seal Station Provides application of loose weather seals on the wire end prior to crimping Quick change kits available to run different size seals MACHINE DIMENSION Length with Straightener 125 in 3175 mm Width with Carts 53 in 1346 mm Height (Guard down) 65.5 in 1664 mm Height (Guard open) 101 in 2557 mm Machine Weight 1900 lbs 864 Kg Cart Weight 70 lbs 32 Kg Max. Reel Width 8.5 in 216 mm POWER SUPPLY Standard VAC +/-10%, 1 Ph, 50/60 Hz. 20 Amp circuit Optional 208 VAC +/- 10%, 1 Ph., 50/60 Hz. 20 Amp circuit PNEUMATIC SUPPLY 80 PSI (6 Bar) 1.5 CFM continuous, 6.5 CFM peak (at master start only) WIRE RANGE Min. 30 AWG 0.05 mm 2 Max. (Standard) 12 AWG 4 mm 2 Max. (With Options) 10 AWG 6 mm 2 Max. OD in 5 mm Note: Largest and smallest wire gages must be verified by Artos to assure processing capabilities. Optional Wire End Twisting and Tinning Twisting unit mounts into the standard TU-12 crimping unit and is easily removed to allow for crimping applications Flux and Tinning unit allow for lead free tinning of wire ends Easy to Use PC Interface Simple, yet powerful, software allows for complete machine programming Networkable system allows for data sharing via.xml or.csv file format Built in quality controls for both set-up verification and process inspection WIRE LENGTH Min in 21 mm (plus lead and tail strip lengths. Min. wire length may also be limited by crimping tooling design). Max in 100 M STRIPPING LENGTHS Min in 0.1 mm Max in 32 mm Innovative Options to Shorten Machine Set-up Time Patent-Pending Sencor automatically sets stripping blade depths Motorized programmable bases automatically adjust tooling height when changing from open to closed barrel crimping Self threading wire loading and tool-less guide changes shorten wire set-up time The first name in wire processing Artos Engineering Company Gateway Ct. Brookfield, WI USA Phone sales@artosnet.com Bulletin No. Cr
3 Page 1 of 4 Base Machine Base Machine with 230 Volt, 1-Phase, 50/60 Hz $50,800 Closed Loop 8M/sec Brushless Servo Roller Feed System Wire measuring end coder with length calibration and wire slip detection Servo Driven Swing Arms Featuring Programmable Wire-Terminal Set-up Servo Driven Cutterhead Featuring Programmable Wire Diameter and Stripping Set-Up Motorized 2 meter collector with batching tray P.C. Operator Interface Featuring Windows and Artos Unity Software Complete wire guide kits for up to 5.5 mm (0.218 ) wire diameter Wire Straightener (Vertical and Horizontal) Complete Upward Lifting Safety Shield One Owners Manual Domestic / Air Box Ocean / Export Box Crate for shipment within USA or Air shipment $755 Crate for ocean shipment. $ Volt, Single Phase Special 208, 1phase, 50/60 Hz. Voltage (requires custom transformer). For use where standard 230 Volt 1 Phase power is not available. $950 Installation / Training Installation and training by Artos direct technicians. Recommend two days minimum. Price is per day. Travel expenses are not included and billed separately. $1,050 Dual Feed Wire Straightener Upgraded wire straightener which allows for the pre-loading of a second wire while the machine is in cycle mode. $3,250 Wire Splice Detector Option for detection splices of wire from wire barrels or spools. Available for single or dual wire straighteners. Price is for single wire straightener. $1,381 Articulating Wire Infeed Roller Two plane articulating wire infeed roller alows for smooth wire feeding from multiple directions. $1,750 Standard TU-15 Servo Crimping TU-15 terminal crimping station for standard "mini" style applicators. Unit is servo controled wtih programmable stroke and split cycle operation. Includes Standard TU- 15 equipped with AMP style die interface kit, terminal carrier strip chop-off, manual Z- Axis height adjustment, and one terminal reel cart. Price is for one unit. $5,500
4 Page 2 of 4 TU-15 (HD) Servo Crimping Upgraded TU-15 Heavy duty terminal crimping station for standard "mini" style applicators. Unit is servo controled wtih programmable stroke and split cycle operation. Includes TU-15 HD equipped with AMP style die interface kit, terminal carrier strip chop-off, manual Z-Axis height adjustment, and one terminal reel cart. TU- 15 HD is recommended for 6mm 2 (10 AWG) wire sized. Price is for one unit. $7,300 TU-15 Manual Crimp Height Adjustment Updgrade to TU-15 crimping unit with manual (dial) adjsustment of the crimping height. Crimping unit may be standard or HD version. Price is per unit. $1,950 TU-15 Programmable Crimp Height Adjustment Updgrade to TU-15 crimping unit with programable (servo controled) adjsustment of the crimping height. Crimping unit may be standard or HD version. Price is per unit. $3,450 "JAM" Style Die Mounting Kit Replaces standard "AMP Mini" style interface kit. Utilizes 30mm press stroke. N/C "AMP Mini" Style Screw Down Die Mounting Kit Replaces standard quick release "AMP Mini" style interface kit. Used for applicators which need high force to open. N/C CFM-2100 Crimp Force Monitor for crimping inspection. System learns "good" crimps and compares all crimps to learned good crimps. If crimp is out of tolerance, the CR.11 will cut the crimp off and remake new wire. Wires with "bad" crimps are separated from good wires. Price is for two presses. $5,900 Bad Wire Chopoff Diverter Guide to sort and collect failed crimps from the trailing wire end. $750 ASM-400 Seal applicator Station for loading loose rubber weather seals onto wire end. Common and interchangable seal kits with Pawo and Schafer. Price includes mounting kit, but excludes tooling kit. $25,950 Large Seal Tooling Kit Tooling kit for SLU module inlcudes feeding track, funnel, and guide pins. Tooling kit is uniquely designed for each individual seal. $6,950
5 Page 3 of 4 Flux / Tin Station for Fluxing and Tinning wire ends. Standard design is for lead free solder. $14,950 TW-3 In Press Twisting Station for twisting wire ends. Can be used with the Flux/Tin to provide twist, flux and tin. Pricing includes TW-3 unit, contral module, and cable. $10,700 Same Wire Doubling Station for placing two separate wires into a common terminal. $6,867 Sencor Patent pending system for automatic setting of stripping blades. Technology senses the conductor within the wire and automatically set the value of the stripping diameter. Reduces wire waste and shortens set-up time. Can also be used to monitor blade wear. $1,950 Cart Assembly Additional cart assembly for pre-loading terminals and die onto a cart off line of the machine, reducing machine down-time for set-up. Recommend two extra carts per machine. $1,250 Paper Take-up Motorized collection of terminal reel paper. This option allows for the coiling of the paper which separates side feed terminals for better housekeeping. Price is for each cart assembly ordered. $375 Paper Take-up Drive This is the drive mechanism which mounts to the CR and activates the paper take-up mounted on the cart assembly. Price is each, two are needed per CR. $450 Motorized adjustment of the Z-Axis (up / down) for wire placement into the terminal. Programmable Z-This option allows for fully programmable adjustment for open to closed barrel Axis terminals, with no manual adjustments. Price is for each press (two are needed for CR.11). $750
6 Page 4 of 4 Crimp Height Measurement Integrated crimp height micrometer. Allows the CR.11 to retain specified crimp height and tolerance for each terminal / wire combination. As part of the machine set-up, crimps must be measured and within tolerance before production begins. $2,000 Pull Test Verification - Manual Tester (May be on Back Order) Integrated terminal pull testing station. Allows the CR to retain specific pull test values for each terminal / wire combination. As part of the machine set-up, crimps must be tested and greater then pull test minimum requirement before production begins. Manual tester requires operator to manual operate the pull testing station. $2,950 Pull Test Verification - Automatic Tester Integrated terminal pull testing station. Allows the CR to retain specific pull test values for each terminal / wire combination. As part of the machine set-up, crimps must be tested and greater then pull test minimum requirement before production begins. Automatic tester utilizes a motor during pull testing. $5,995 Ink-Jet Interface Interface for Imaje 9040 ink jet marking system. Fully integrated with programmable and recallable marking of wire. Avialable with eithe bar mounting or cutterhead mounting. Marking system is sold separately. $6,000 Active Wire Collection "Pick n Place" unit Pneumatic gripper to assist in wire collection. Completed wires are handed to the pick n place unit which lowers the finished wire into the collection tray. $2,250 4-Meter Collector W/ Acitve Pick n Place Upgrade to 4 meter motorized collector with batch sorter for long wire collection. Includes active wire collection "Pick n Place" unit. $10,200 Bar Code Scanning Integration of a bar code scanning system for data entry. Used for input of production data. Also used to verify materials supplied to the machine. $950 Post Process Printer Integrated label printer allowing the printing of customer defined information upon the completion of a wire batch. Used for routing of material and traceability. $1,350 Spare Parts Kit Common replacement parts for CR.22 (kit # ) $495
7
Cr.22 WIRE PROCESSING MACHINE FEATURES. Convenient Tool Cart Solution reduces set-up time and improves throughput
The first name in wire processing Cr.22 WIRE PROCESSING MACHINE FEATURES Convenient Tool Cart Solution reduces set-up time and improves throughput Up to four processing stations for a wide range of applications
More informationUNIQA-PRO SINGLE CRIMP WIRE PROCESSOR
UNIQA-PRO SINGLE CRIMP WIRE PROCESSOR A UNIQUE APPROACH TO SIMPLIFYING YOUR BOTTOM LINE A UNIQUE WAY TO SIMPLIFY YOUR BOTTOM LINE The UNIQA-PRO single crimp wire processor is a cost-effective solution
More informationGamma 255. The fully automatic wire processing machine for wires with small cross sections
Gamma 255 The fully automatic wire processing machine for wires with small cross sections Top quality processing over a uniquely broad range of cross sections. This fully automatic wire processing machine
More informationGamma 263. Functionality and economy ideally combined
Gamma 263 Functionality and economy ideally combined THE WAY TO MAKE IT AFFORDABLE Although compact in size, this fully automatic crimping machine combines simplicity and functionality with economy and
More informationAlpha 355S / Alpha 356. Multifunctional automatic crimping machines
Alpha 355S / Multifunctional automatic crimping machines THE WAY TO MAKE IT FLEXIBLE With their open architecture, the Alpha 355S and have a wide variety of applications. Besides Komax standard processing
More informationLead Makers and Harness Makers
and Harness Makers and Harness Makers Application Tooling and Equipment Portfolio Applicators Crimp Machines and Equipment Electrical Test Equipment FFC-FPC Equipment Hand Tools IDC Machines Lead Makers
More informationCoe Press Equipment Corporation. Power Straighteners. Coe Press Equipment Corporation. The Company That Feeds an Industry
Coe Press Equipment Corporation Power Straighteners Coe Press Equipment Corporation The Company That Feeds an Industry POWER STRAIGHTENERS 175 Series Straighteners The 175 Series of power straighteners
More informationCrimping Tool & Machine
Crimping Tool & Machine Product reliability depends on three things: design, manufacturing and processing. To ensure the highest level of reliability, our Nittan Techno subsidiary designs, makes and sells
More informationOptimise wire processing A comprehensive range of products for the workshop
Optimise wire processing A comprehensive range of products for the workshop Forward-looking process optimisation Cutting to length, stripping and crimping the faster and more accurately these routine tasks
More informationNu/Clean AquaBatch XL The Batch Cleaner with the HIGHEST TEMPERATURE PROCESS & the added cleaning power of STEAM!
Nu/Clean AquaBatch XL The Batch Cleaner with the HIGHEST TEMPERATURE PROCESS & the added cleaning power of STEAM! The AquaBatch XL is a quiet, efficient batch cleaning system designed to remove all types
More informationPATM-RK / PATM-TT. Best Practices for Successfully Integrating PAT1M or PAT1.5M Systems With a Robot
Panduit Corp. 2012 PATM-RK / PATM-TT PA26234A01 Rev. 04 9-2012 Best Practices for Successfully Integrating PAT1M or PAT1.5M Systems With a Robot Panduit recommends using the PAT/Robotic Kit (PATM-RK) when
More informationVersion 7 1/ LXP
SECTION 11600 LABORATORY GLASSWARE WASHER Model 1600 LXP PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation
More informationVersion 7 1/ LX
SECTION 11600 LABORATORY GLASSWARE WASHER Model 1300 LX PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation
More informationLOKPRINT. Industrial Apparel Label Station. Operation / Maintenance And Parts List. Users Manual AVERY DENNISON. Manual Edition 5.0.
Users Manual LOKPRINT Industrial Apparel Label Station Operation / Maintenance And Parts List AVERY DENNISON Manual Edition 5.0 09 June 2010 Manual Part Number 221398 This page intentionally left blank
More informationPROFIT STARTS WITH CARE
Farmpackers DIAMOND 70 FP DIAMOND 100 FPX DIAMOND 200 FPX part of the moba group PROFIT STARTS WITH CARE Right hand Diamond 200 FPX. Right hand Diamond 100 FPX shown with 90 degree takeaway conveyor and
More informationApplication Specification MAG-MATE* Poke-In Tab Terminals
Application Specification MAG-MATE* 114-2050 Poke-In Tab Terminals 30 MAR 07 Rev G1 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationRevisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
More informationTube Cleaners.
Tube Cleaners www.elliott-tool.com Tube Cleaners Table of Contents Pg. Tube Cleaners 2 5370 Jiffy Gun 3 537100C Jumbo Jiffy Gun 4 Jiffy Gun & Jumbo Jiffy Gun Spares & Accessories 5 Soot Buster 5 Soot
More informationSECTION LABORATORY GLASSWARE WASHER Model 1800 LXA PART 1 GENERAL 1.01 SYSTEM DESCRIPTION 1.02 SUBMITTALS 1.03 QUALITY ASSURANCE 1.
SECTION 11600 - LABORATORY GLASSWARE WASHER Model 1800 LXA PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation
More informationITC 2000 HEATING CONTROL CABINET. Installation & Operation Manual
ITC 2000 HEATING CONTROL CABINET Installation & Operation Manual VTI, Incorporated 24 McMillan Way Newark, DE 19713 Phone (302) 738 0500 FAX (302) 738 6594 Revision Level 0.03 Manual No. 90003314 June,
More informationCAUTION. Machine: SHRINK LABEL AUTOMATIC APLICATOR. Model: SLEEVEPRO 450AB. Input Voltage: 400 VAC, 3PH, 50Hz. Contact:
CAUTION Read carefully all the instructions of this manual before start any operation on this machine. Do not put your hands close to any moving part of the machine. Do not make any adjustment when the
More informationDesoldering DS017 DS017-P DS017LS AS196 US140 US140-P. LT-1 Lead free tip tinning compound (.5 oz. )
For over 40 years EDSYN has been manufacturing high quality precision soldering and desoldering tools and associated equipment. Don t compromise on quality and features, always specify EDSYN. Desoldering
More informationDS7400Xi Addressable Control/ Communicator
DS7400Xi Addressable Control/ Communicator DS7400Xi DS7400Xi-EXP 110VAC operation 220VAC operation Remotely Programmable WDSRP (Windows Detection Systems Remote Programming Software), allows the systems
More informationMANUAL VERSION SERIAL # X-1 MINI PRO OWNER S MANUAL ASSEMBLY & OPERATOR INSTRUCTIONS 1.0
SERIAL # MANUAL VERSION 1.0 Introduction WARNING: To limit risk of potential injury and material damage, all users must read these instructions in their entirety and follow them strictly. Check our YouTube
More informationTC-720 RECYCLING BALER
OPERATING AND MAINTENANCE INSTRUCTIONS TC-720 RECYCLING BALER READ INSTRUCTIONS THOROUGHLY BEFORE OPERATING Sept. 06, 2013 3451 S. 40th Street Phoenix, AZ 85040 602.437.5020 800.223.4540 www.tsissg.com
More informationLevel V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
More informationSYST0101CW Product Specifications
SYST0101CW Product Specifications IONt SYSTEM CONTROL NOTE: Iont System Control compatible with Iont System indoor equipment only. US Patents: U.S. Pat No. 7,243,004, U.S. Pat No. 7,775,452, pointsett
More informationData Sheet. Self regulating process heating tapes RS stock numbers ,
Data Pack K Issued March 1997 232-3333 Data Sheet Self regulating process heating tapes RS stock numbers 379-889, 379-974 The information contained within this sheet regarding applications and installation
More informationFort Rouge Leisure Centre Section HVAC Upgrades Phase 2 Page 1 of 5 Bid Opportunity No March 2013 FIRE ALARM SYSTEMS
HVAC Upgrades Phase 2 Page 1 of 5 Part 1 General 1.1 SUMMARY.1 Section Includes:.1 Materials and installation for fire alarm systems upgrades..2 Audible signal devices..3 End-of-line devices..4 Sustainable
More informationSEWING AUTOMATION. Model 1335SA. Innovative Technology for the Sewn Products Industry Worldwide
SEWING AUTOMATION Innovative Technology for the Sewn Products Industry Worldwide New Style Ruffled Pillow-Top Plain, Fused, Vertical Stitch and Quilted Gusset 300% productivity improvement over manual
More informationToll Free:
1 ProLine s electric radiant floor heating system is one of the most popular and durable floor heating solutions on the market. Available pre-spaced in mats with an adhesive backing or on the spool, the
More informationTwo Great Signs of Progress Come Together to Bring You More...
Want More? More at the Corr Two Great Signs of Progress Come Together to Bring You More... More leading edge direct printing on corrugated technology. More dedication to the advancement of direct print
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section CHLORINE GAS LEAK DETECTOR
Section 11263 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of chlorine leak detectors as shown on Plans and specified herein. 1.02 MEASUREMENT AND PAYMENT No separate
More informationKimberleyTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection.
KimberleyTM A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Patent
More informationH&O DIE SUPPLY, INC SPR-2000-JR. Programmable Fluid Controller Interstate 20 Kennedale, TX 76060
9 SPR-2000-JR Programmable Fluid Controller www.unist.com 3 10 Metalforming Lubrication Systems this input is typically based on the stroke of the press and comes from a programmable limit switch (PLS)
More informationUSER S OPERATING AND INSTRUCTION MANUAL
Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 1508-NLG SELF-ACTUATING TRAY LIDDER 1508S20000CV2 INDEX SAFETY INSTRUCTIONS... 1508S20002 SET UP... 1508S20003 OPERATING
More information60" Tulle PatioTM. Instruction Manual. A Kichler Select ceiling fan
60" Tulle PatioTM A Kichler Select ceiling fan cul Certified for Wet Location Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30
More informationM O D E L G W T - 202P OPERATIONS MANUAL TABLE OF CONTENTS
M O D E L G W T - 202P OPERATIONS MANUAL TABLE OF CONTENTS INTRODUCTION... 1 SECTION 1 1.0 SAFETY... 1-1 1.1 EMERGENCY... 1-1 1.2 Know your machine... 1-1 1.3 Power Supply... 1-1 1.4 Keep guards in place....
More informationTL-105 COLUMN HEATER
TL-105 COLUMN HEATER INSTRUCTION MANUAL Timberline Instruments Inc. 1880 S. Flatiron Ct., Unit I Boulder, Colorado 80301 Ph: (303) 440-8779 Fx: (303) 440-8786 info@timberlineinstruments.com www.timberlineinstruments.com
More information1. SAFETY RULES WARNING WARNING. 8. Avoid placing objects in the path of the blades.
1 1. SAFETY RULES 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5770 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5700 A full cycle ratcheting hand tool ensures complete crimps Ergonomically
More informationTube Cleaners.
Tube Cleaners www.elliott-tool.com Tube Cleaners Table of Contents Pg. Tube Cleaners 2 5370 Jiffy Gun 3 537100C Jumbo Jiffy Gun 4 Jiffy Gun & Jumbo Jiffy Gun Spares & Accessories 5 Soot Buster 5 Soot
More information96% AFUE Efficiency CONDENSING RESIDENTIAL GAS BOILERS CONTROL WITH ADVANCED USER FEATURES MODELS FROM 80,000 TO 285,000 BTU/HR
CONDENSING RESIDENTIAL GAS BOILERS CONTROL WITH ADVANCED USER FEATURES MODELS FROM 80,000 TO 285,000 BTU/HR 5:1 FIRING RATE MODULATION LESS THAN 20 ppm NOx DIRECT VENT FLEXIBILITY TO 100 FEET 96% AFUE
More informationUser s Manual: WERI Mini Applicator
User s Manual: User s Manual Page 1 of 15 Table of Content 1 Document revision history... 2 2 Important warnings... 3 3 Symbols... 4 4 Identification... 5 5 Technical data... 5 6 Installation (trained
More informationSchneider Electric Erie T155 Series
Schneider Electric Erie T Series Non-Digital, On/Off Thermostat General Instructions Application The T series thermostat provides on/off control for low voltage and line voltage valves, relays and fan
More informationElectric Process Heaters & Engineered Systems
Celebrating 50 Years Electric Process Heaters & Engineered Systems Company Info aumer Process is a world leader in the design and manufacturing of electric heaters, controls and engineered Gsystems, since
More informationHatteras BayTM. Patio. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S.
Hatteras BayTM Patio A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go!
More informationYou are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect.
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect. Connectivity and electrical installation A high degree of automation for standardised
More informationASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-17 FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and
More informationTaco 00 Series Cartridge Circulators
Water Circulation Pumps & Circulators Taco 00 Series Cartridge Circulators For over 70 years, Taco has led the industry with the highest quality circulators you can buy. Designed for a wide range of residential
More informationIntegrated Packaging Systems, Inc.
Integrated Packaging Systems, Inc. Tablet Filling Liquid Filling Design for your success Bottle Handling Integrated Packaging Systems, Inc. IPS is a leader in design and manufacturing of packaging machinery
More informationFRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1
FRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1 Hotfoil, Inc. Robbinsville, NJ 08691 Phone: 609.259.4118 / Fax : 609.259.4119 http://hotfoil.com TABLE OF CONTENTS I Product Specification
More informationVacuum Tube Lifters - Overview
Vacuum Lifters Lifting & Handling Equipment :: Vacuum Tube Lifters 2 :: Drum & Sack Handling 4 :: Box & Reel Handling 6 :: Board & Door Handling 8 :: White Goods & Pallet Handling 10 :: Vacuum Grippers
More informationPump-Up Controller MODEL 4062
Pump-Up Controller 4-20mA Input/Scalable Output Seal Fail Monitoring Duplex Pump Alternation Hand-Off-Auto Controls Dual Run-time Meters RS-485/Modbus Communications DESCRIPTION The Model 4062 Pump-Up
More informationM O D E L G W T OPERATIONS MANUAL TABLE OF CONTENTS
M O D E L G W T - 202 OPERATIONS MANUAL TABLE OF CONTENTS INTRODUCTION... 1 SECTION 1 1.0 SAFETY... 1-1 1.1 EMERGENCY... 1-1 1.2 Know your machine... 1-1 1.3 Power Supply... 1-1 1.4 Keep guards in place....
More informationHARDwired Installation/ Owner s Manual
HARDwired Installation/ Owner s Manual Use this manual for circuit - Revision L or higher. For Models:,, and Multi-Door Access Controller Wiegand Compatable --R-- Provides Access Control System to manage
More informationRoto-Jet I & II Tube Cleaning Systems
Roto-Jet I & II Tube Cleaning Systems Tube Size Tube Section Deposit Thickness of Deposit Deposit Flush 0.312 to 2.000 Straight Soft, guy, Light (7.9 to 50.8) ID Curved or organic Medium Dry Elliott Tool
More informationUNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN.
UNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN > ONE-STEP technology > Process bulky plastic scrap > One-button automatic On/Off control > DUmP and RUN operation www.ngr.at TECHNOlOGY THE
More informationE Labelers Wraparound Labeling for Cylindrical Containers
NI I EW WAY BULLETIN El E Labelers Wraparound Labeling for Cylindrical Containers Model E5 Labeler shown with STD casters, deep label bed and guard package. Fig. 1622. "A step ahead in packaging" Featurr
More informationTFD-1 Installation & User s Guide
TFD-1 Installation & User s Guide TABLE OF CONTENTS CHAPTER 1 - INTRODUCTION... 4 1.1 GENERAL...4 1.2 DESCRIPTION...4 CHAPTER 2 - INSTALLATION... 5 2.1 UNPACKING...5 2.2 MOUNTING...5 2.3 SWITCH SETTINGS...6
More informationVMC 208. Product Capacity: Width: 1-20 (Speeds +450 minute)
VMC 208 Product Capacity: Width: 1-20 (Speeds +450 minute) VMC 206 vacuum transport/finishing conveyors - Quality without compromise - from the innovative vacuum system to the anodized aluminum frames.
More informationUSER S OPERATING AND INSTRUCTION MANUAL
Walker, Michigan, U.S.A. 49534-7564 USER S OPERATING AND INSTRUCTION MANUAL MODEL 1908-12/17 AUTOMATED PACKAGING SYSTEM 1908S20052CV INDEX SAFETY.....1908S20054 PG. 1-1 UNCRATING.1908S20055 PG. 2-4 QUICK
More information42 Kevlar. Instruction Manual. Kichler Lighting 7711 East Pleasant Valley Road P.O. Box Cleveland, Ohio
42 Kevlar Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30 AM to 5:00 PM EST, Monday - Friday Instruction Manual 1 1. SAFETY
More informationLead-Lined Cabinetry. 7 Vreeland Road, Florham Park, NJ or
Lead-Lined Cabinetry 7 Vreeland Road, Florham Park, NJ 07932 201.825.9500 or 800.631.3826 www.capintec.com Lead-Lined Cabinetry Everything about Capintec s lead-lined cabinetry conveys quality. Attention
More informationComplete Waste Tire Recycling Line
Complete Waste Tire Recycling Line Manufactured new in 2009 and started operation in 2010 and has less than three years in service. This line is designed to handle 1.5millon 2millon tires per year. This
More informationTOOL STORAGE. Tool Storage. XL Series Ball Bearing Series Tool Storage Accessories
Tool XL Series Ball Bearing Series Tool Accessories GEARWRENCH XL SERIES GearWrench now offers the industrial strength XL Tool series. Professionals have come to expect innovation and increased productivity
More informationUnderfloor Catalogue Heating products that define the market
YEAR 5 WARRANTY Underfloor Catalogue Heating products that define the market By Underfloor Heating Control We provide a range of room temperature controls (thermostats) to optimize the operating efficiency
More informationonlinecomponents.com
SIMEZE Terminals 28 Product Facts Terminates all copper magnet wire film insulations Eliminates need for prestripping conductors Moving Beam contact design connects a wide range of magnet wire sizes with
More informationMafo develops and builds a line of standard
For more than 40 years Mafo has been designing and constructing industrial cleaning equipment in stainless steel. The extensive experience and expertise gained in all these years is expressed in the wide
More informationUsers Manual. LAURUS Systems, Inc. - Ph: Fax:
Users Manual LAURUS Systems, Inc. - Ph: 410-465-5558 - Fax: 410-465-5257 - www.laurussystems.com Introduction The rad-d is a security and inspection system that detects emissions from radioactive material.
More informationSECTION LOW VOLTAGE LIGHTING CONTROLS
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS PART 1 - GENERAL 1.01 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationEN l L-Tron Washer/Extractor. L-Tron Washer/Extractor. The Large Capacity Washer Extractor for both automated and stand-alone systems
EN l L-Tron Washer/Extractor L-Tron Washer/Extractor The Large Capacity Washer Extractor for both automated and stand-alone systems The powerful, versatile single motor drive system L-Tron Auto Pro 450
More informationLV-5 Direct Contact Low Voltage Detector and LV-5/K01 Kit including LV-PT Tester, Holster and Available Accessories
LV-5 Direct Contact Low Voltage Detector and LV-5/K01 Kit including LV-PT Tester, Holster and Available Accessories Operating & Instruction Manual 1475 Lakeside Drive Waukegan, Illinois 60085 U.S.A. 847.473.4980
More informationUser Guide for Wire-to-Board Connector
User Guide for Wire-to-Board Connector 1. Product Name and Specifications of Product Hirose products are identified by two product names and specifications, each of which has the meaning shown below: Statement
More informationThe system should also be capable of recording events automatically on any compatible DVR and should be able to retrieve recordings based on events.
0BThe System The Security Management System should be capable of Controlling and Monitoring Access through the doors, Monitor and control Inputs and Outputs, include an Integrated Video Badging, Integrate
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS T CLASS TSA Series 6 to 20 Ton AIR CONDITIONERS 6 20 TONS 506147 01 06/11 Supersedes 3/11 Litho U.S.A. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT The Clean Air Act
More informationWOODY FR-W L. s INSTALLATION INSTRUCTIONS. modernforms.com. works with the Google Assistant
WOODY -60L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET SMART Durably finished and Rated for interior and exterior
More informationph COOLING TOWER CONTROLLER
LAKEWOOD INSTRUMENTS MODEL 350 ph COOLING TOWER CONTROLLER INSTRUCTION MANUAL SERIAL #: Lakewood Instruments 7838 North Faulkner Road, Milwaukee, WI 53224 USA Phone (800) 228-0839 Fax (414) 355-3508 http://www.lakewoodinstruments.com
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63825-7170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-7100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationRead these instructions thoroughly before crimping any terminals.
Figure 1 This instruction sheet covers the application and maintenance procedures for Pneumatic Crimping Head Assembly 314991 1. The crimping head assembly is designed for use in Pneumatic Tool 69015 to
More informationTooling Assistance Center
Safeguards are designed into this application equipment to protect operators and maintenance personnel from most hazards during equipment operation. However, certain safety precautions must be taken by
More informationBAND SAW BLADES ALO AL 101 O
BAND SAW BLADES ALO 101 ALO 106 ALO 110 ALO 110K ALO 123 ALO 126 ALO 127 ALO 131 ALO 144 ALO 144-PSS ALO 177 ALO 181 ALO 183 ALO 184-A ALO 184-B ALO 185 ALO 185-C ALO 186 ALO 187-B ALO 191 ALO 191-CP ALO
More informationWE ARE HOTRONIX 2018 CATALOG
WE ARE HOTRONIX 2018 CATALOG PROUDLY MADE IN THE USA Born from the specific requirements of heat transfer materials, Hotronix has been taking the guesswork out of heat applying since the 1980s. Now stronger
More informationSLATE. Base Module INSTALLATION INSTRUCTIONS R8001A1001
SLATE Base Module R8001A1001 INSTALLATION INSTRUCTIONS Scan for more information Application SLATE brings configurable safety and programmable logic together into one single platform. The platform can
More informationInstructIon Manual KrEs EQuIPMEnt stands
Instruction Manual Instruction Manual SELF-CONTAINED AND REMOTE Kairak KRES model refrigerated equipment stand units are available in many lengths from 36 to 120 inches long. These units are available
More informationBASIL 6000 TUNNEL CAGE WASHER
BASIL 6000 TUNNEL CAGE WASHER APPLICATION For thorough, efficient cleaning of cages, debris pans, bottles, feeder bowls, and miscellaneous items used in the care of laboratory animals. DESCRIPTION The
More informationDescription. Construction
LUH LUH PDS Horizontal Unit Heater 2.6 to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)
More informationFA 35 / FA 43 / FOLDERS
FA 35 / FA 43 / FOLDERS Uniquely dedicated to precise, light-weight pharmaceutical leaflet folding FA35 / FA43 FOLDERS B EXCEPTIONAL MINIATURE FOLDING This is the only sheetfed folder specifically designed
More informationG. MONDINI DOSATRICI-CONFEZIONATRICI AUTOMATICHE. Tray Sealer Trave-340
Technical Documentation G.Mondini S.p.A. G. MONDINI Tray Sealer TRAVE-340 SpA DOSATRICI-CONFEZIONATRICI AUTOMATICHE Tray Sealer Trave-340 Tool sizes are 300mm in width and 400 in length, number of trays
More informationGuide Spec Summary. Option List. Date: 05/21/2001. EarthWise VAV Terminal Units Full Spec. Prepared by: Phone Number: Prepared for:
Date: 05/21/2001 Time: 02:57:44 PM Job Name: EarthWise VAV Terminal Units Full Spec Location: AnyTown, Earth Prepared by: Phone Number: Prepared for: Guide Spec Summary Option List SINGLE & DUAL DUCT UNIT
More informationElevators Revision 01/04/2019
Revision 01/04/2019 SUMMARY Work of this section includes providing equipment, incidental material and labor required for a new elevator. Where singular reference is made to elevator or elevator components,
More informationKUH. Horizontal Unit Heater. Applications. Description
KUH KUH PDS Horizontal Unit Heater 2.6 kw to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)
More informationRotary Die-cut System RD series. RD series. Rotary Die-cut System RD-4055 / RD-4055DM / RD Simple, high quality, compact rotary Die-cut system.
Rotary Die-cut System RD series RD series Rotary Die-cut System / DM / RD-3346 Simple, high quality, compact rotary Die-cut system. Improve your die cutting process! Quick, easy change over and simple
More informationNew Power Wire Processing Machinery Co.,Ltd.
Wire Stripping Cutting and Crimping Machine (WPM-R1) Wire Stripping Cutting and Crimping Machine (WPM-R1) Product Name : Wire Stripping Cutting and Crimping Machine Product Model: WPM-R1 Price: Inquiry
More informationFTNON Magnetic Onion peeler
Magnetic Onion peeler Yield - Hygiene - Convenience Yield Hygiene Convenience. These are the key features of the new onion peeling machine developed by in collaboration with Gills Onions and the American
More informationFT900BD FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900BD FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system Water usage 120 gph @ 20 psi Microprocessor controls Low temperature alert Blower dryer with 2 H.P.
More information1. SAFETY RULES. 8. Avoid placing objects in the path of the blades.
1 1. SAFETY RULES 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National
More informationFA 36/FA 45 FOLDERS. Easily fold miniature-size leaflets as well as commercial products on the same folder
FA 36/FA 45 FOLDERS Easily fold miniature-size leaflets as well as commercial products on the same folder A FOLDING/ DEFLECTOR PLATES are made of durable chromium-plated steel for anti-static operation
More informationChicagoTM. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S.
Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Patent Pending ChicagoTM A Kichler Decor ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box
More informationGrafisk Maskinfabrik A/S Bregnerødvej 92, DK-3460 Birkerød, Denmark Phone: Internet: Fax:
Grafisk Maskinfabrik A/S Bregnerødvej 92, DK-3460 Birkerød, Denmark Phone: +45 45 81 23 00 Internet: www.gm.dk e-mail: gm@gm.dk Fax: +45 45 81 99 56 OPERATING INSTRUCTIONS FOR TF400 Folding Machine 2 Index
More information