VAC LINE SET DUCT AND ACCESSORY PRODUCT CATALOG Correctly installing an air conditioner requires the use of dedicated accessories. When the customer invests in an air conditioner, he relies on the professional knowledge and experience of the installer. He trusts that the equipment will provide lifelong enjoyment while integrating into the residential or commercial environment with little visual intrusion. A professional air conditioner installation is one that is nearly invisible. SpeediDuct and its fittings are the solution to cover, protect, and aesthetically hide the line sets, whether outdoors or in, with a wide selection of connections that cover what is needed in any installation configuration. SpeediDuct saves time and money!
FEATURES: Outstanding UV resistance: protects the line sets and drain hoses against degradation Energy saver Extends A/C unit life SpinFix : time saver; contains the line sets and drain hose during installation Available in standard ivory or white: integrates well with the color of the outdoor unit Paintable: practically blend the duct with the wall Flush-fit features: the outer design of the bottom section of SpeediDuct is flat. This allows better in-corner positioning and avoids any gaps for dust, dirt, and insects to nest Stainless steel screws: fittings are tightly assembled for a rigid installation with no corrosion stains Large size: the largest SpeediDuct is over 5.5" wide with ample space for multi-split installations, the largest of its kind available Flat rosette: connecting an evaporator to SpeediDuct is the easiest and most aesthetic solution available; next to the soffit inlet fitting, the unique flat rosette enables the duct to be mounted flush with the wall while covering the hole for the line sets to pass through the ceiling Adjustable flat bend: uneven wall surfaces or specific installation situations may require SpeediDuct to be connected in various angles other than 45 or 90 ; the adjustable flat bend is the flexible solution to this problem Two-year limited warranty: while other manufacturers only offer a one-year limited warranty, the quality of material used in SpeediDuct provides for a longer warranty; conditions apply The SpeediDuct system is A MUST for prolonging the life of any A/C installation!
HVAC SPEEDIDUCT ACCESSORIES LINE SET DUCTS ACCESSORIES UNIT SUPPORT DRAINAGE Line Set Ducts SpinFix + Cable Tie SpinFix Installed TABLE OF CONTENTS Index Index...1 Line Set Ducts SpeediDuct...2 Optimal Duct...7 Accessories Roof Inlet...10 Wall Sleeve...10 Ductless Mini Split Condenser Support Wall Support...11 Condenser Support...12 Drain Pans & Hose for Ductless Mini Splits Drain Pans...13 Hoses and Connections...14 Pipes and Connections...15 All images are for illustration purposes only. Delivered products may differ. All data in this brochure can be subject to modification without prior notice. Typographical mistakes reserved.
LINE SET DUCTS SPEEDIDUCT 3" - 4" - 6" Straight Duct Quick and easy installation Made of rigid PVC for impact resistance is fadeproof and UV resistant Protects the line sets against deterioration due to climatic conditions and helps to reduce energy consumption Aesthetically blends with any type of construction or building and can be painted to the color of your choice Three snap lock SpinFix are included with each 6.5' length (D3-S and D4-S only) Available in ivory or white Paintable Dimensions [in (mm)] A B Length [ft (mm)] 599600001 D3-S Ivory 3 (70) 2.5 (65) 6.5 (2000) 6 599600002 D4-S Ivory 4 (105) 3 (75) 6.5 (2000) 6 599600003 D6-S Ivory 6 (150) 3.25 (80) 6.5 (2000) 5 599600301 D3-SW White 3 (70) 2.5 (65) 6.5 (2000) 6 599600302 D4-SW White 4 (105) 3 (75) 6.5 (2000) 6 599600303 D6-SW White 6 (150) 3.25 (80) 6.5 (2000) 5 Installation Kits Dimensions A [in (mm)] B [in (mm)] 599600050 D3-IK Ivory 3 (70) 2.6 (65) 599600051 D4-IK Ivory 4 (105) 3.0 (75) 599600350 D3-IKW White 3 (70) 2.6 (65) 599600351 D4-IKW White 4 (105) 3.0 (75) Installation Kit 3" Installation Kit Includes 4" Installation Kit Includes item D3-1K D3-1KW 4' Line Set Duct D3-S D3-SW 3 Wall Cover D3-WC D3-WCW 1 Unions D3-U D3-UW 2 Adjustable Elbow D3-AFB D3-AFBW 1 Duct End D3-E D3-EW 1 SpinFix + Cable Ties D-SFCT-10 D-SFCT-10 1 (10-piece bag) Part Name D4-1K D4-1KW 4' Line Set Duct D4-S D4-SW 3 Wall Cover D4-WC D4-WCW 1 Unions D4-U D4-UW 2 Adjustable Elbow D4-AFB D4-AFBW 1 Duct End D4-E D4-EW 1 SpinFix + Cable Ties D-SFCT-10 D-SFCT-10 1 (10-piece bag) 2
LINE SET DUCTS SPEEDIDUCT Installation Starter Kits XL Dimensions [in (mm)] A B Length [ft (mm)] 599600083 D3-IK-XL Ivory 3 (70) 2.6 (65) 6.5 (2000) 1 599600084 D4-IK-XL Ivory 4 (105) 3.0 (75) 6.5 (2000) 1 599600383 D3-IKW-XL White 3 (70) 2.6 (65) 6.5 (2000) 1 599600384 D4-IKW-XL White 4 (105) 3.0 (75) 6.5 (2000) 1 Installation Kit 3" Installation XL Kit Includes Part Name 4 Line Set Duct 3 Wall Cover 1 Unions 2 90 Long Flat Elbow 1 Flexible Hose 2.4 x 39.4 1 Connector 1 Duct End 1 End Cap 1 Stainless Steel Clamp 1 10 SpinFix + Cable Ties 1 (10-piece bag) 4" Installation XL Kit Includes Part Name 4 Line Set Duct 3 Wall Cover 1 Unions 2 90 Long Flat Elbow 1 Flexible Hose 2.4 x 39.4 1 Connector 1 Duct End 1 End Cap 1 Stainless Steel Clamp 1 10 SpinFix + Cable Ties 1 (10-piece bag) Flex Hose Kits Designed to Use With 599600052 D3-FHK Ivory 3" Duct 599600053 D4-FHK Ivory 4" Duct 599600352 D3-FHKW White 3" Duct 599600353 D4-FHKW White 4" Duct Flex Hose Kit 3" Flex Hose Kit Includes Part Name Flexible Hose 39.4 Long 2 End Cap 2 Connector 4 Stainless Steel Clamp 4 4" Flex Hose Kit Includes Part Name Flexible Hose 39.4 Long 2 End Cap 2 Connector 4 Stainless Steel Clamp 4 3
LINE SET DUCTS SPEEDIDUCT 3" - 4" Soffit Cover 3" - 4" Adjustable Flat Elbow Adjustable flat bend between 45 and 90 599600006 D3-SI Ivory 10 599700007 D4-SI Ivory 10 599600306 D3-SIW White 10 599600307 D4-SIW White 10 599600004 D3-AFB Ivory 10 599600005 D4-AFB Ivory 10 599600304 D3-AFBW White 10 599600305 D4-AFBW White 10 3" - 4" - 6" Wall Cover 3" - 4" - 6" 90 Flat Bend Elbow 3" - 4" - 6" 90 Elbow Bend (Inside) 599600008 D3-WC Ivory 10 599600009 D4-WC Ivory 10 599600010 D6-WC Ivory 10 599600308 D3-WCW White 10 599600309 D4-WCW White 10 599600310 D6-WCW White 10 599600011 D3-90FB Ivory 10 599600012 D4-90FB Ivory 10 599600013 D6-90FB Ivory 10 599600311 D3-90FBW White 10 599600312 D4-90FBW White 10 599600313 D6-90FBW White 10 599600023 D3-90IC Ivory 10 599600024 D4-90IC Ivory 10 599600025 D6-90IC Ivory 10 599600323 D3-90ICW White 10 599600324 D4-90ICW White 10 599600325 D6-90ICW White 10 4
LINE SET DUCTS SPEEDIDUCT 3" - 4" - 6" 90 Long Flat Elbow 3" - 4" - 6" 90 Elbow Bend (Outside) 3" - 4" - 6" 45 Flat Bend Elbow 599600014 D3-LFB Ivory 10 599600015 D4-LFB Ivory 10 599600016 D6-LFB Ivory 10 599600314 D3-LFBW White 10 599600315 D4-LFBW White 10 599600316 D6-LFBW White 10 599600020 D3-90C Ivory 10 599600021 D4-90C Ivory 10 599600022 D6-90C Ivory 10 599600320 D3-90CW White 10 599600321 D4-90CW White 10 599600322 D6-90CW White 10 599600017 D3-45FB Ivory 10 599600018 D4-45FB Ivory 10 599600019 D6-45FB Ivory 10 599600317 D3-45FBW White 10 599600318 D4-45FBW White 10 599600319 D6-45FBW White 10 3" - 4" - 6" Duct End 3" - 4" - 6" Duct Cap 3" - 4" - 6" Union 599600035 D3-E Ivory 10 599600036 D4-E Ivory 10 599600037 D6-E Ivory 10 599600335 D3-EW White 10 599600336 D4-EW White 10 599600337 D6-EW White 10 599600038 D3-C Ivory 10 599600039 D4-C Ivory 10 599600040 D6-C Ivory 10 599600338 D3-CW White 10 599600339 D4-CW White 10 599600340 D6-CW White 10 599600026 D3-U Ivory 10 599600027 D4-U Ivory 10 599600028 D6-U Ivory 10 599600326 D3-UW White 10 599600327 D4-UW White 10 599600328 D6-UW White 10 5
LINE SET DUCTS SPEEDIDUCT 3" - 4" & 4" - 6" Reducer Joint 4" - 6" T-Joint D34-RJ used with D4-TJ to reduce D4-S and D3-S D46-RJ used with D6-TJ to reduce D6-S and D4-S D4-TJ used to join D3-S and D4-S (requires D34-RJ) D6-TJ used to join D4-S and D6-S (requires D46-RJ) 599600033 D34-RJ Ivory 10 599600034 D46-RJ Ivory 10 599600333 D34-RJW White 10 599600334 D46-RJW White 10 599600029 D4-TJ Ivory 10 599600030 D6-TJ Ivory 10 599600329 D4-TJW White 10 599600330 D6-TJW White 10 3" - 4" - 6" Flat Rosette (Ceiling) 3" - 4" - 6" Wall Rosette 3" - 4" Flex Joint 599600041 D3-FR Ivory 10 599600042 D4-FR Ivory 10 599600043 D6-FR Ivory 10 599600341 D3-FRW White 10 599600342 D4-FRW White 10 599600343 D6-FRW White 10 599600044 D3-WR Ivory 10 599600045 D4-WR Ivory 10 599600046 D6-WR Ivory 10 599600344 D3-WRW White 10 599600345 D4-WRW White 10 599600346 D6-WRW White 10 599600031 D3-FJ Ivory 10 599600032 D4-FJ Ivory 10 6
LINE SET DUCTS SPINFIX AND OPTIMAL DUCT SpinFix Twist-motion snap locks easily into mounting rail inside the duct and is adjustable to any position SpinFix and cable tie keep the tubing in place during installation Description [bag] 599600047 D-SFCT-10 SpinFix and Cable Ties 10 599600048 D-SF-50 SpinFix 50 599600049 D-CT-50 Cable Ties 50 Optimal Duct 3.1" - 4.3" Line Set Duct Compact duct with protection film to preserve its clean and white aspect during the installation phase With the SpinFix, you can easily strap the line sets and drain hose inside White color standard Made from rigid PVC: shockproof, UV stabilized, and operational in a wide range of temperatures from -4 F (-20 C) to 140 F (60 C) in a static position Dimensions [in (mm)] A B Length [ft (mm)] 599600072 OD3.1-S 3.1 (80) 2.4 (60) 6.6 (2000) 4 599600092 OD4.3-S 4.3 (110) 3.0 (75) 6.6 (2000) 4 7
LINE SET DUCTS OPTIMAL DUCT Optimal Duct 3.1" - 4.3" 90 Flat Elbow Optimal Duct 3.1" - 4.3" 90 Inside Corner Optimal Duct 3.1" - 4.3" 90 Outside Corner 599600073 OD3.1-90FB 10 599600093 OD4.3-90FB 10 599600074 OD3.1-90IC 10 599600094 OD4.3-90ICW 10 599600075 OD3.1-90C 10 599600095 OD4.3-90C 10 Optimal Duct 3.1" - 4.3" 90 Union Optimal Duct 3.1" - 4.3" Wall Rosette Optimal Duct 3.1" - 4.3" Wall Cover 599600077 OD3.1-U 10 599600096 OD4.3-U 10 599600078 OD3.1-WR 10 59960097 OD4.3-WR 10 599600079 OD3.1-WC 10 599600098 OD4.3-WC 10 8
LINE SET DUCTS OPTIMAL DUCT Optimal Duct 3.1" - 4.3" End Cap Optimal Duct 4.3" T-Joint Optimal Duct 3.1" - 4.3" End Transistion 599600080 OD3.1-C 10 599600099 OD4.3-C 10 599600100 OD4.3-TJ 10 599600102 OD3.1-E 10 599600103 OD4.3-E 10 Optimal Duct 4-1/4" to 3-1/8" " Reducer 599600101 OD4.3-RJ 10 9
ACCESSORIES ROOF INLET AND WALL SLEEVE Roof Inlet Covers installation cuts in the roof for line sets from an outdoor unit Standard ivory color Resistant to weathering and aging Assembles with stainless steel screws (supplied) X Dimensions [in (mm)] 599600055 RI-S 5 x 5 (125 x 125) 1 599600056 RI-L 5 x 10 (125 x 250) 1 Wall Sleeve Protects the insulation on the copper tubes from damage during installation Larger width covers indoor drill imperfections Adjustable to the wall thickness A 2.5" (64 mm) diameter hole is required 4" (100 mm) 2.5" (6464 mm) mm 1 2 3 4 5 599600054 D-WS 10 10" (250 mm) 13.75" (350 mm) 10
DUCTLESS MINI SPLIT CONDENSER SUPPORT WALL SUPPORT Crossbar Condenser Bracket Powder-coated ivory 0.06" (1.5 mm) thick galvanized steel Reinforced two-point assembly Lateral embossing in both bracket arm parts Pre-assembled with one screw Supplied with a complete assembling kit: wall and crossbar mounting kit, anti-vibration dampers, and adjusters for easy leveling on uneven wall surfaces Bracket arms can be easily adjusted via a sliding nut-holder (4) made from composite materials to reduce vibration noises Horizontal [in (mm)] Vertical [in (mm)] Crossbar [ft (mm)] Max. Load Weight [lb (kg)]* 599600061 WB-18 17.75 (450) 15.75 (400) 3 (960) 176 + 176 (80 + 80)** 599600062 WB-21 21 (530) 15.75 (400) 3 (960) 176 + 176 (80 + 80)** Adjustable: composite sliding mounting clamp reduces noise and vibration transmission *It is your responsibility to choose and use appropriate tools and materials which ensure the final installation is in compliance with all national, state, local, and environmental regulations, and that safety factors are appropriate for your intended application. **Maximum of 176 lb (80 kg) per arm. 11
DUCTLESS MINI SPLIT CONDENSER SUPPORT CONDENSER SUPPORT Mountblock MBW Heavy 4" x 4" (100 x 100 mm) 1000 lbs (450 kg) maximum allowable load capacity per item** Shock absorbent Quick and easy installation Suitable for a large range of units (mounting rail feature) Mounting bolts included Standard ivory color Wrapped in pairs Length [in (mm)] [sets] 599600057 MBW-14 13.8 (350) 6 599600058 MBW-17 17.7 (450)** 6 599600059 MBW-36 39.4 (1000) 1 Mountblock End Cap 4" x 4" (100 x 100 mm) Quick and easy installation Standard ivory color Description 599600060 MBW-C End cap for mountblock 4" x 4" (100 x 100 mm) 4 **Maximum load weight does not take into account any safety factors. 12
DRAIN PANS AND HOSE FOR DUCTLESS MINI SPLITS DRAIN PANS Features Made from rigid, UV-stabilized plastic that is 100% rust-free Adjustable to any kind of bracket Embedded water outlet diameters of 5/8", 11/16", and 13/16" (16 mm, 18 mm, and 20 mm) The two hanging supports are made of glass-fiber reinforced plastic and also 100% rust-free Inside tray surface is slightly sloped to channel the water to the outlet A B Dimensions A [in (mm)] B [in (mm)] 599600063 DP-3717 37 (940) 16.5 (420) 1 599600064 DP-3115 31 (790) 15.3 (390) 1 Embedded Outlet: 5/8" - 11/16" - 3/4" (16 mm - 18 mm - 20 mm) Inside tray surface is slightly sloped to channel the water to the outlet 13
DRAIN PANS AND HOSE FOR DUCTLESS MINI SPLITS HOSES AND CONNECTIONS Drain Pipe Standard ivory color Hose length 164 (50 m) Regular cutmarks Connects to 5/8", 11/16", and 3/4" (16 mm, 18 mm, and 20 mm) systems UV resistant Connections [in (mm)] [roll] 599600065 DH-1 5/8-11/16-3/4 (16-18 - 20) 1 Drain Pipe Y Connection Standard ivory color To connect DH-1 drain pipes Useful in case of multi-split installation UV resistant Top Bottom Top [in (mm)] Dimensions Bottom [in] 599600066 DHC-Y 5/8-11/16-3/4 (16-18 - 20) 5/8 20 14
DRAIN PANS AND HOSE FOR DUCTLESS MINI SPLITS PIPES AND CONNECTIONS Condenser Connection - Soft / Rigid Overinjected Top: Rigid Pipe a a a a a a Bottom: Hose b b b b b b Connection A [mm] B 599600067 DC-16 14-16 - 18-20 5/8" (16 mm) Yellow 20 599600068 DC-18 14-16 - 18-20 18 mm Red 20 599600069 DC-20 14-16 - 18-20 3/4" (20 mm) Blue 20 599600070 DC-25 14-16 - 18-20 1" (25 mm) Green 20 599600071 DC-32 14-16 - 18-20 1-1/4" (32 mm) Gray 20 *Hose clamps (not supplied) are recommended to ensure watertightness. 15
NOTES 16
BENEFITS: Covers and protects line sets and drain lines Line sets link the outdoors to the indoor units. They carry the refrigerants that enable the cooling or heating functions of your evaporator. In most of the installation configurations, line sets connected to the outdoor unit run along the wall before penetrating the exterior wall. That portion is particularly exposed to degradation because of climatic conditions or intruders, such as insects or birds. Furthermore, UV rays have a quick and dramatic deteriorating effect on the insulation that covers the line sets. Without proper protection, the insulation starts to crack and turns into powder. In the meantime, the weakened material feeds birds, insects, and other parasites. Drain lines generally run along the line sets and suffer from the same conditions. SpeediDuct is the ultimate protective layer that keeps line sets and drain lines safe from degradation, ensuring that the installation works longer in the best conditions. Saves energy If not covered by a duct, the insulation material will quickly deteriorate. The line sets will be exposed, and their thermal-conductive feature will lead to a loss of cooling or heating capacity of the refrigerant. The installation will start over-functioning and consume more energy than necessary. Extends the lifespan of an A/C installation When an outdoor unit starts to over-function due to a loss of the refrigerant capacity, its core components break down faster. This incurs higher costs for maintenance or parts replacement, and may even require the entire unit to be replaced within an abnormally short time. The stylish duct Available in standard ivory or white, SpeediDuct harmoniously integrates the installation along the outdoor condensing unit. The bottom part of the duct is flat so that it can be installed flush at the corners. Most existing ducts have a lower part that is rounded and allows dust, dirt, and insects to enter. This results in a dark line of dirt or dust along the installation. The fittings are assembled with stainless steel screws that provide a stable installation with no loose parts! UV-resistant The raw materials of SpeediDuct have been carefully selected to be manufactured in the best quality. The PVC used for SpeediDuct is proven to be highly UV-resistant and will resist fading while maintaining its mechanical strength. Quick and easy installation SpeediDuct has been engineered to ease the job of the installer. Thanks to SpinFix, it is a quick and easy install into the duct with ease per the following instructions: 1. Insert a cable tie in the SpinFix. 2. Insert the SpinFix into the rail at the bottom of the SpeediDuct. 3. Place the line set, drain hose, and control cable within the duct. 4. Fasten the cable tie and cut off the excess material. 5. Snap on the SpeediDuct cover and the installation is complete!
Form #996728 07-15 P.O. Box 12010 Oklahoma City, OK 73157-2010 Phone: 1.800.701.7894 Fax: 1.800.678.7867 www.littlegiant.com