MDL SOLUTIONS Technical Catalogue NA Version PDWL AECM LSTAT Series Hydronic EC Ducted Fan Coil Hydronic Fan Coil Platform Introduction Company Introduction HVAC Solutions Sonkor Global
MDL SOLUTIONS Technical Catalogue PDWL AECM LSTAT Seeries Hydronic EC Ducted Fan Coil PRODUCT PRESENTATION: L-STAT PDWL Ducted Fan Coil Series has been designed according to the functional and technical requirements that satisfy the most demanding markets. It offers a complete product range, with 3 row, 3+1 Auxrow and 4 row coils, optional ESP availability, and constructional features to maximize the product flexibility, such as auxiliary heating coils and auxiliary electrical heaters suitable for on-site or in-stock installation. The fan motor assembly can be removed and replaced without de-installation of the unit.
Product Features EC Motor: The LSTAT PDWL AECM Ducted Fan Coil Series incorporates DC motors with step-less speed modulation using an integrated EC motor driver. Energy saving or unit power input at set H/M/L speeds is reduced by 30-50% in comparison against traditional on/off AC motors. Moreover, in Energy Saving Auto Mode (ESM), as airflow is continuously varied (step-less progression) between 15% and 100% of the maximum high speed airflow, energy saving will be 50 70% while precisely meeting the required cooling and heating loads of the space. This innovation eliminates the need for the motor to turn off and on periodically to maintain the desired temperature of the environment, leading to total energy savings of up to 50% on an installation/project basis, in addition to its inverter airflow continuously silent operation. The motor is driven by a 0 5 VDC signal originating from an inverter board integrated into the unit onboard controller, which utilizes PID logic in order to modulate motor RPMs in Energy Saving Auto - Mode (ESM). Flexibility: The LSTAT PDWL AECM Ducted Fan Coil has been designed to maximize product flexibility on site, and in stock offering: Interchangeable Left / Right hand connections Easy to remove fan motor assembly, coil and filter for maintenance, without de-installation of the unit Easy to install external valves with standardized pipe connections. Auxiliary Electric Heater and Auxiliary 1 row Heating Coil suitable for On-site or In-stock installation Various Plenum Connector Accessories for multiple applications Product Range 9 sizes 2 pipe models from 1.73 kw/ 5900BTU to 9.87 kw/ 33700BTU cooling capacity. Variable External Static Pressures (ESP) up to 60Pa. 3 row, 3+1 Auxrow (for 4pipe configuration) and 4 row coils available. Standard Configuration The LSTAT PDWL ECM Ducted offers as standard Nylon net filter(s) and interchangeable left/ right-side coil connections. Control Options Total Control PCB (S type) Complete function control compatible with IR Handset controller and/ or Wired Wall Pad, offering continuous or stop-fan cycle selection, 2-pipe/4-pipe selection, with or without valve selection, electric heat function selection, pre-heat configuration selection, 1-32 units addressable master-slave control with one-touch continuous global control functionality, addressspecific slave error recognition system using LED receiver display or wall-pad, 1-2048 units BMS control using any open MODBUS platform and 1 data-logger per 32 units with a maximum of 64 data-loggers. Flexible function controller for wired remote thermostat applications with Integrated condensate management control with dry alarm contact, mode indication and limited LED diagnostic, suitable for EC motor wired thermostats with 0-5VDC or 0-10VDC modulating signal and AC motor wired thermostats with L/M/H/*Auto speed on/off signals and with integrated fan relays 1-to-many zone control.. PDWL AECM LSTAT Series Hydronic EC Ducted Fan Coil
Product Accessories: Controls: - IR Handset + Wall Holder (with Total Control PCB) With Global Control functionality for Master - Slave groups - Professional Wired Wall Pad (with Total Control PCB) 7 day ON/OFF timer program. Addressable Master Slave controls up to 32 units in one group with set or check of each unit parameters individually. Error display with addressable error diagnostic (Master unit Wall Pad displays Slave unit address and error type). One Touch Global Control (Global Control Master Wall Pad controls all units in the group). Multi-color backlight display. Onboard Room Air Temperature Sensor - Data Logger for Modbus BMS connection (with Total Control PCB) 1 Data Logger will control up to 32 units. Up to 64 Data Loggers can be connected to control a maximum of 2048 fancoils by BMS. - STCD Thermostats (for Flexi Control PCB) Auxiliary Heating Coils: Easy to install extra heating coil for 4 pipe applications. Electrical Heaters: The electric heater module is supplied for winter heating as an alternative to the auxiliary hot water coil. We offer a complete range of PTC electric heaters kits, easy to connect to plug in control box, with mounting fixture installation on auxiliary 1 row heating coil and onboard PCB electric heater configuration selectable by DIP switch. Electric Heater is installed at the same way and same position as the Auxiliary 1 row heating coil for 4-pipe system. Valves: 2-way or 3-way bypass valves, ¾ and ½ connectors, with Thermoelectric Actuators. Stainless Steel Hose and Copper Piping Connection Kits for 2-way and 3-way valve options. Distance between inlet and outlet pipe connections standardized at 40mm (1.57in) for hot water circuit, and 50mm (1.97in) for cold water circuit. Stainless Steel Drain Pan: Plenums: - Return Air and Discharge - Intake and Discharge Air with circular fittings PDWL AECM LSTAT Series Hydronic EC Ducted Fan Coil
Model Code Nomenclature PDWL - 06 - V - Y - S - AECM AECM EC Motor Configuration S W Complete function onboard PCB with integrated group control functionality. Flexible function control for External Thermostat applications with control of Drain Pump, Louvers and Zone Control product operations Y: 115V/60Hz X: 220V/60Hz P V Chilled/Hot Water, 4-Pipe Chilled/Hot Water, 2-Pipe 06-40 PDWL Unit Sizes Low Static Hydronic Ducted Fan Coil PDWL AECM LSTAT Series Hydronic EC Ducted Fan Coil
Technical Specifications Product range: PDWL(3R)-V~-AECM Hydronic Ductable Unit 3-row coil 2-pipe with EC Motor (Data according to ARI standards) a. Cooling mode (2-pipe/ 4-pipe): - Return air temperature: 80F DB/ 67F WB. - Inlet/ outlet water temperature: 45F/ 55F. b. Heating mode (2-pipe): - Return air temperature: 70F. - Inlet water temperature: 140F. - Water flow-rate: Same as 2-pipe cooling.
Technical Specifications Product range: For Auxiliary Heating Coil (1 row) (Data according to ARI standards) PDWL(3+1 AUXR)-P~-AECM Hydronic Ductable Unit with EC Motor a. Heating mode (4-pipe): - Return air temperature: 70F. - Inlet/ outlet water temperature: 180F/140F.
Technical Specifications Product range: PDWL(4R)-V~-AECM Hydronic Ductable Unit 4-row coil 2-pipe with EC Motor (Data according to ARI standards) a. Cooling mode (2-pipe/ 4-pipe): - Return air temperature: 80F DB/ 67F WB. - Inlet/ outlet water temperature: 45F/ 55F. b. Heating mode (2-pipe): - Return air temperature: 70F. - Inlet water temperature: 140F. - Water flow-rate: Same as 2-pipe cooling.
Dimensional drawings PDWL 3R/4R AECM PDWL(3R/4R)-06 Metric Dimensions (mm): PDWL(3R/4R)-06 Imperial Dimensions (in):
Dimensional drawings PDWL 3R/4R AECM PDWL(3R/4R)-09/12/15/18 Metric Dimensions (mm): Model A B C PDWL(3R/4R)-09 PDWL(3R/4R)-12 PDWL(3R/4R)-15 PDWL(3R/4R)-18 648 590 770 798 740 920 948 890 1070 998 940 1120
Dimensional drawings PDWL 3R/4R AECM PDWL(3R/4R)-24/30/36/40 Metric Dimensions (mm): Model A B C PDWL(3R/4R)-24 PDWL(3R/4R)-30 PDWL(3R/4R)-36 PDWL(3R/4R)-40 1348 1290 1470 1498 1440 1620 1648 1590 1770 1798 1740 1920 PDWL(3R/4R)-09/12/15/18/24/30/36/40 Imperial Dimensions (in): Model A B C D d PDWL(3R/4R)-09 PDWL(3R/4R)-12 PDWL(3R/4R)-15 PDWL(3R/4R)-18 PDWL(3R/4R)-24 PDWL(3R/4R)-30 PDWL(3R/4R)-36 PDWL(3R/4R)-40 25.51 23.23 30.31 34.41 29.13 36.22 37.32 35.04 42.13 39.29 37.01 44.09 53.07 50.79 57.87 59.98 56.69 63.77 64.88 62.6 69.69 70.79 68.5 75.59
MDL SOLUTIONS 2275 UPPER MIDDLE RD E - SUITE 101 OAKVILLE, ONTARIO L6H 0C3 P: 289 799-3414 e-mail: general@mdlsoln.com Global EU Office C/ de la Cruz, 33, 30100 - Murcia-Spain T +34 968 224634