Fire Safety Awareness Workbook For All Staff Please ensure you read the workbook thoroughly and complete the assessment at the end Version 2.
Introduction Fire safety training is a mandatory element of training as detailed in the UK Core Skills Training Framework. This workbook provides an opportunity for the basic level of compliance to be met on a bi-annual basis but should not take the place of a classroom session. Managers are responsible for ensuring staff within their teams complete the workbook provided and ensuring any necessary assistance or support is given to aid its successful completion. The commentary part of the workbook can be discussed as part of a team meeting but the question section must be completed on an individual basis. Should there be any issues regarding the completion of the question section then it can take the form of an oral assessment and their responses recorded. Learning Outcomes Enable staff members to achieve compliance with statutory requirements To increase staff awareness of fire safety measures in place and ensuring they are maintained in the work environment Ensure staff are able to respond to a fire or fire alarm activation Training Requirements The trust policy states that fire safety competence should be demonstrated on a bi-annual basis for all staff members in addition to the attendance at a fire safety session during the induction process. Refresher options: Classroom session (bi-annually) E learning Workbook and assessment Guidance for Completion Each topic has a section with associated questions and should take no longer than 10 15 minutes to complete. If a pass mark of 75% is not achieved an instructor led or e-learning session must be attended. Dates and times of instructor led sessions can be located on the Slate booking system on PC desktops. Please read the contents of the competency workbook provided Remove the workbook from the question section and keep for future reference. Complete all personal details on the back of the Question Section Answer all questions. Partial completion will be recorded as a did not pass (Please be aware some questions require more than one answer). The completed questionnaire should be sent to Mandatory training who will forward it on to the Fire Safety Advisor for marking. 2
Fire Costs 2016 /2017 Fire killed 313 people 15815 fires (does not include dwellings) Fires in hospitals & medical care 656-137 were deliberate Casualties in hospitals & healthcare 3 people died and 62 were injured In 2008 fire cost 8.3 billion Fire Safety Legislation The Regulatory Reform (Fire Safety) Order 2005 (FSO) came into force on 1 October 2006 replacing the previous fire safety legislation. The FSO identifies the Responsible Person, usually the Employer, placing on them certain requirements. In the case of the hospital it is the Trust Board These requirements include: Ensuring that a fire risk assessment is completed and a written record of any significant findings is made. For the hospital risk assessments are completed to cover either a Block, Ward, Department or Building. The management of the fire safety measures, both preventative and protective, within each premises The FSO also places requirement on all staff members to assist the Responsible Person (RP) to ensure that the fire safety measures are maintained and that there actions do not cause the RP to commit an offence. It should be noted that individuals can be held responsible for their actions. Whilst the Trust Board would be known as the Responsible Person anyone who has a degree of control over an area is termed as a Duty Holder and is responsible for ensuring the fire safety measures are maintained. Such people would be Ward Managers or Department Heads. The role of the Fire Safety Advisor is to provide guidance to the Trust on all fire safety matters to ensure our compliance with the Fire Safety Order. This would include formal guidance to the Trust and can include informal guidance at ward and departmental level. Guidance to assist in ensuring compliance for Healthcare Premises can be found in the Firecode Documents, Health Technical Memorandums (HTMs) and a government guidance document Fire safety risk assessment Healthcare Premises 3
Fire Development and Spread Fire is a chemical reaction brought about by the combining of fuel, oxygen and the application of sufficient heat to cause ignition. The easiest way to represent this is as a triangle. This is usually available in the surrounding air or can be from other sources such as oxidising agents or piped Cause by an electrical fault, flame or radiated heat This could be a solid, liquid or gas The removal of any one of these will result in the fire going out: Cooling removal of the heat element Starvation removal of the fuel Smothering removal of the oxygen Fire spreads in a number of ways. Principally these are: Convection When a fire occurs it produces hot gases which rise, heating other substances which will ignite if they reach their ignition temperature. Conduction When a solid article such as a metal door or steel beam is heated the heat is transferred along the article and has the potential to ignite materials away from the original location of the fire. Radiated Heat When an article is heated by a fire the heat can transfer across a space to another article which then will heat. Should this second article reach its ignition temperature it will then ignite. Direct Burning This can be by the application of a flame or the ignition of an article by another burning material. The other main issue with fire is that it produces smoke and hot gases in large quantities. Whilst fire is visible smoke and gases may not be and yet pose a greater risk to people in the vicinity, and in particular to those who are more vulnerable such as the young, elderly and those who are unwell. The hospital premises are constructed in such a way so as to prevent the spread of smoke. This includes fire resisting doors, fire resisting walls and ceilings. 4
Fire Hazards (Causes) There is a need to understand some of the causes of fire and the reasons it spreads which will then guide on how to tackle them. Although this will be formally done as part of the fire risk assessment process there is a need for all staff to be aware of this so that by taking a few easy steps the risk of fire can be reduced. As has been previously stated, to start a fire there needs to be three elements (fuel, oxygen and a heat source). The removal of any one of these will prevent a fire from occurring. The four most common causes of fire in the NHS are: Smoking Electrical Appliances Cooking Arson Other actions which have the potential to cause a fire include: Obstruction of the ventilation of heaters, machinery and electrical equipment including computers and other office equipment Trapped or pinched electrical cables Storage of combustible materials near to ignition sources Poorly maintained electrical or other equipment Inadequate supervision of cooking or other work activities Appliances being left on when not in use Inadequate maintenance of equipment Control Measures Fire Prevention There are a number of measures that can be taken to prevent fires from occurring in the first instance. How are the four most common causes of fire controlled within the Trust? Smoking From 1st October 2017, all forms of smoking (including tobacco, e-cigarettes and vaping) were banned and are no longer permitted anywhere on the hospital site. This relates to all outdoor areas, including the car parks. https://intranet.mkuh.nhs.uk/smoke-free-site Electrical Appliances / Installation Portable appliance testing is undertaken on a regular basis as part of the planned preventative maintenance programme. The Trust s Electrical Policy states that All electrical appliances must be tested before use within the Trust. It also says that extension leads should only be used when authorised by the Estates Competent Person and then only after they have been tested. In respect of electrical items bought in by patients or visitors a visual check should be made and, whenever possible, a discussion with the Estates Competent 5
Person (Mark Brown, Electrical Services Manager). In addition the electrical installations throughout the site are tested on a regular basis in accordance with BS 7671. The Electrical Policy also states that extension leads should only be used in exceptional circumstances. The proposed use of an extension lead should be discussed with the Estates Department as the alternative of fitting additional sockets could be a more suitable solution. Joining of extension leads in a daisy chain must be avoided. Cooking Cooking equipment, including toasters and microwaves should only be used in kitchens or staff rest rooms. They are not to be placed or used in offices. In addition toasters, microwaves and any other cooking equipment must never be left unattended. Arson This issue can be difficult to manage. The management of this is the responsibility of all staff members being vigilant, not permitting the accumulation of combustible materials in areas which can be easily accessed by everyone including visitors and members of the public. Fire Alarm and Detection The hospital is fitted with an electrical fire alarm system which includes: Break Glass Call Points These need to be operated by a person to alert others in the event of a fire Automatic smoke detection These devices detect smoke. Once detected activates the fire alarm Automatic Heat Detection These devices operate when either the temperature around them has reached a pre-determined level or a rapid rise in temperature, has been detceted Sounders & Visual Warning Devices These devices alert people to the fact that a fire has been detected on site. There are two stages, an Intermittent alarm and a Continuous alarm 6
Fire Extinguishers /Equipment Fire extinguishers / equipment are provided throughout the site. Generally there are two type of extinguisher: Water Carbon Dioxide (CO 2 ) There may be other types of extinguisher which are for specific risks; such as Dry Powder or Foam. Fire blankets are also provided in kitchen areas and should be wall mounted. Fire extinguishers are used to tackle different classes of fire dependent on the material involved. They all have red bodies but include a 5% colour band which assists in identifying the content of the extinguisher Water Extinguisher coloured RED often with white writing. Class A Paper, cardboard, wood fabrics, and similar materials Carbon Dioxide (CO 2 ) extinguisher Red with a BLACK band on its body. Suitable for using on fires involving electrical equipment Foam extinguisher Red with a CREAM band on its body Class B Flammable liquids mainly, but could be used as per Class A 7
Dry Powder extinguisher Red with a BLUE band on its body. Class B Flammable liquids. Can also be use on fires involving live electrical equipment. NB: SHOULD NOT BE USED INSIDE A ROOM OR BUILDING A Non-Flammable blanket which can be used to smother a small contained fire such as in a saucepan, toaster, microwave or to wrap someone in whose clothes are on fire. Will usually be in Kitchens, Tea rooms and potentially in Laboratories. Unless trained, staff members should NOT use fire extinguishers to fight a fire. The one exception to this is where to use one would aid your escape. Ensure that you have read the instructions on how to use the extinguisher before you may need to use it. Failure to do this will delay your escape and could potentially put yourself at risk Fire extinguishers are generally sited in the following positions: Adjacent to final fire exit Adjacent to fire alarm call points (break glass) Near to a room that has a specific risk 8
Fire Protection - Compartmentation This is provided by fire resisting walls, floors, ceilings and doors. The combination of these provides protection, permitting people to escape to places of relative safety. It is essential these elements are maintained in a good state of repair and are not abused. The item which is often abused is the fire resisting self-closing door. These doors are fitted to provide protection to escape routes and form part of the protection around high risk areas such as operating theatres, plant rooms and storage areas. On NO ACCOUNT should these doors be held open by any means other than approved devices and then only after a suitable and sufficient risk assessment has been completed. Approved Devices Magnetic connected to the fire alarm. On activation of the alarm it releases allowing the door to close. Free swing connected to the fire alarm. On activation of the fire alarm it releases allowing the doors to close Devices- NEVER TO BE USED Wedges of any description Fire extinguishers Waste bins Cardboard boxes or similar items 9
Where there is an identified need for a fire resisting door to be held open for air circulation or operational needs then a proposal for an approved hold-open device to be fitted should be made to the Fire Safety Advisor in the estates department. Escape Routes Escape routes including staircases, corridors and hospital streets should be kept clear at all times to enable people to safely move to a place of relative safety adjacent fire compartment or a place of ultimate safety outside the building. Exits can become easily obstructed which then makes them either unusable or difficult to use, potentially putting lives at risk. On no account they should escape or protected staircases be used as storage or workplaces. There are a number of devices that may be seen on fire exit doors, these include the following: Push bars ( sometime know as panic bars) Approved security devices Electro-magnetic locking devices. 10
PUSH BARS SECURITY DEVICE MANUAL OVERRIDE ELECTRO-MAGNETIC LOCK The exit doors fitted with an electro-magnetic locking device should fail safe (unlocked) on the activation of the fire alarm. Should this fail for whatever reason the manual override should be operated and the door will unlock. It is operated by breaking the glass. 11
Emergency Procedures Within the hospital there are Clinical and Non-Clinical areas. The emergency procedures for each of these areas will differ depending on the people involved. The procedures are as follows: Non-Clinical Areas N.B: There is No Intermittent alarm in non-clinical areas Action on discovering a fire Operate the nearest fire alarm call point Telephone 2222 and inform switchboard of the exact location of the fire. If not possible call 999 requesting the fire service Inform supervisor, if possible Evacuate immediately reporting to the assembly point and remain there Do not re-enter the building unless told it is safe to do so DO NOT ATTEMPT TO FIGHT THE FIRE UNLESS TRAINED Action on hearing the fire alarm (continuous) Leave building by nearest exit route Do not stop to collect personal belongings Do not use lifts Report to the Assembly Point and remain there Do not re-enter the building until told it is safe to do so by the fire & rescue service or the senior person present. 12
Clinical Areas N.B: There are both Intermittent and Continuous Alarms within Clinical Areas Action on discovering a fire Operate the nearest fire alarm call point Call 2222 informing switchboard of the location of the fire or call 999 to summon the fire service Inform supervisor Commence evacuation of patients using agreed prioritisation Evacuate people into safe areas either into another fire compartment or to a place of ultimate safety outside the building Piped oxygen supplies should only be isolated on the direct instruction of the Ward Manager or Senior Member of Staff on duty Action on hearing a Continuous Alarm Fire Warden should put on their jacket Prepare to commence evacuation of patients as directed Evacuate people into safe areas either into another fire compartment or to a place of ultimate safety outside the building Piped oxygen supplies should only be isolated on the direct instruction of the Ward Manager or Senior Member of Staff on duty Continue to care for patients Should it be necessary to evacuate to a place of ultimate safety, it is essential that everyone proceeds to the Fire Assembly Point. This will assist in identifying if anyone is missing. Do not re-enter the building or area unless you have been told it is safe to do so by either the fire & rescue service or the senior person present. Action on hearing an Intermittent Alarm This means that a continuous alarm is sounding in an adjacent area. If possible, the fire warden should try to liaise with the fire warden of the affected ward or area Preparation should be made for the potential evacuation of the people in the area / ward Be prepared to receive patients from the adjacent area Give reassurance to patients and visitors REMEMBER IT WILL TAKE MORE THAN ONE PERSON TO EVACUATE A BED BOUND PERSON OR OTHER HIGHLY DEPENDANT PEOPLE 13
Progressive Horizontal Evacuation The principal of Progressive Horizontal Evacuation (PHE) is that of moving occupants from an area affected by fire through a fire resisting barrier (door) to an adjoining area on the same level, designed to protect the occupants from the immediate dangers of fire and smoke. Occupants may remain there until the fire is dealt with, or await further evacuation to another similar adjoining area or down the nearest protected escape staircase. Reporting Defects To ensure that the fire safety standards in the hospital are maintained make sure that any fire safety defects are reported. Please use the HELPDESK to report and maintain our standards. This can be done by email to: estateshelpline@mkuh.nhs.uk FIRE SAFETY ADVISOR CONTACT DETAILS: TEL: 01908 996086 EXT: 86086 EMAIL: Christopher.gill@mkuh.nhs.uk My role as the Fire Safety Advisor is to provide advice to the Trust on all matters relating to fire safety. This includes: Fire risk assessments, following up on fire safety audits, arranging fire warden training, conducting fire drills and visiting areas of concern. Summary This fire safety awareness workbook has covered the following areas: Legislation and responsibilities Fire development and spread Causes of fire Control measures Fire extinguishers Fire protection Escape routes and exit doors Emergency procedures Progressive horizontal evacuation 14