Automatic Waste Water Lifting Unit Type Series Booklet
Legal information/copyright Type Series Booklet KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without KSB s express written consent. Subject to technical modification without prior notice. KSB Aktiengesellschaft Frankenthal
Contents Contents Building Services: Drainage... 4... 4... 4 Main applications... 4 Fluids handled... 4 Operating data... 4 Designation... 4 Design details... 4 Materials... 4 Product benefits... 5 Certification... 5 Technical data... 5 Characteristic curve... 5 Connections... 6 Dimensions... 7 Installation example... 7 Scope of supply... 8 Accessories... 8 3
Building Services: Drainage Building Services: Drainage Designation Example: C Key to the designation Code Ama-Drainer-Box Mini C Description Type series Small waste water lifting unit Variant for aggressive fluids Design details Design Collecting tank made of impact-resistant plastic, for floor or wall mounting Odour-proof cover with activated carbon filter and integrated overflow protection Submersible motor pump which starts and stops automatically, with special float Integrated swing check valve To EN 12050-2 Type of installation Stationary above-floor installation Connections Inlet DN 50/ DN 40/ DN 32 Discharge outlet DN 40 Shower connection DN 50 Main applications Single-pump units: above-floor box Mini Automatic drainage of washbasins, showers, washing machines, dishwashers, etc. DN 40 spigot and socket connection can be fitted at the site for venting Drive Single-phase a.c. motor Integrated temperature switch With cable and shock-proof plug Fluids handled Impeller type Standard variant Slightly contaminated water Open multi-vane impeller, free passage of 10 mm Variant C Variant C Material variant for aggressive waste water Aggressive fluids is not suitable for sewage from urinals and toilets. For these applications, please use our minicompacta sewage lifting units. Materials Overview of available materials Operating data Operating data Characteristic Flow rate Head Temperature of fluid pumped Q up to 10 m3/h (2.8 l/s) H up to 6.5 m t up to 35 C1) Component Collecting tank Pump Polypropylene See description for Ama-Drainer N 301 (C) 1) Up to 3 minutes for waste water from the hot water cycle of washing machines and dishwashers for non-industrial use. 4
Building Services: Drainage Product benefits Impact-resistant plastic collecting tank Ready-to-connect, easy installation and commissioning Integrated swing check valve Shower connection as standard Certification Certification Effective in: Comment Europe All sizes Technical data Selection table Ama-Drainer-Box Submersible waste water pumps Mat. No. [kg] With Ama-Drainer N P 1 P 2 50 Hz 1~230 V Power cable H07RN-FG [kw] [kw] I N [A] [m] [mm 2 ] Mini 2) 301 SE 0.43 0.18 1.9 3 3 x 0.75 29131770 9 Mini C 2) 301 SE/C 0.43 0.18 1.9 3 3 x 0.75 29131771 9 Characteristic curve 8 0 US.gpm 50 0 20 IM.gpm 40 5 20 H [m] [ft] N 301 5 0 0 5 Q [m 3 /h] 10 15 0 2 [l/s] 4 2) Supplied fully assembled ex works 5
Building Services: Drainage Connections 3 4 1 7 5 2 6 Connections Connections Connection Description Inlet / discharge outlet 1+2 Socket DN 50, horizontal optional for inlet with special pipe part DN 50/ DN 40/ DN 32 for discharge outlet special pipe part DN 40 Inlet 3 Socket DN 50, vertical for inlet with special pipe part DN 50/ DN 40/ DN 32 Connection to washing machine possible via Y-drain pipe Auxiliary connections Cable gland 4 Cable grommet, diameter 48 mm Shower connection 5+6 Special pipe part, outside diameter 50 mm, either right or left Venting 7 Carbon filter insert with overflow protection. Wherever possible, leading the vent pipe out of the roof is recommended (max. outside diameter 40 mm). 6
Building Services: Drainage Dimensions 75 A A 328 B 90 230 72 62 B 100 190 (1) 95 (2) 456 35 (3) 155 82 322 Dimensions [mm] (1) Cut-in level standard design (2) Cut-in level shower design (3) Cut-out level standard and shower design A Inlet / discharge outlet B Shower connection Installation example 7 6 H 1 2 3 1 4 5 Installation example 1 Inlet 2 Waste water lifting unit 3 Discharge line 4 Socket gate valve 5 Valve preventing backflow into the shower basin 6 Flood level 7 Backflow loop H Pipe loop min. 150 mm 7
Building Services: Drainage Scope of supply Small, ready-to-connect waste water lifting unit consisting of: Stable plastic collecting tank with pressure-sealed, odour-proof cover Inlet-side connections (rubber sockets) 2x DN 50/ 2x DN 40/ 1x DN 32 Discharge-side connection DN 40 (rubber socket) Shower connection DN 50 (special pipe part) Carbon filter insert with overflow protection Submersible motor pump which starts and stops automatically, with integrated swing check valve Accessories Electrical accessories Item Description M 1 alarm contactor Magnetic float switch as contactor for alarm switchgear AS 0, AS 2, AS 4 and AS 5 with 5 m connection cable Mat. No. 18040562 [kg] 0,8 Alarm switchgear Item Description Mat. No. [kg] Alarm switchgear AS 0, AS 2, AS 4 with circuit breaker, piezoceramic signal transmitter, 85 db(a) at a distance of 1 m and 4.1 khz, green equipment-on lamp Plastic housing IP 20, 140 x 80 x 57 mm; use float switch, F 1 moisture sensor (item E 64), M1 alarm contactor, or signal relay of control unit as contactor. E 50 AS 0 mains-dependent 29128401 0,5 29128422 0,5 E 51 AS 2 mains-dependent with volt-free signalling contact E 52 E 53 E 55 AS 4 mains-independent with volt-free signalling contact/battery buffer and selfcharging power supply unit (for 5 hours' operation in the event of power failure) Alarm switchgear AS 5 Mains-independent, with self-charging power supply unit for 10 hours' operation in the event of power failure, mains pilot LED, fault indicator light, horn-off push button, volt-free contact for hook-up to a control station, ready for connection with 1.8 m cable and plug. ISO housing IP 41, 190 x 165 x 75 mm, use float switch (E 60) or signal relay of control unit as contactor Alarm equipment (e.g. horn) E 70 230 V ~/ 12 V = 5 VA Alarm switchgear AS 1 in ISO plug housing IP 30, mains-independent, with self-charging power supply unit for 5 hours operation in the event of a power failure, acoustic signal 70 db(a) with circuit breaker and integrated signal transmitter with 3-metre connection cable, max. 60 C, not suitable for steam and condensate. Alarm transmission options: Water alarm signal at a water level of only 1 mm (!), by placing the contactor on the floor of rooms subject to a flooding risk, e.g. the cellar or next to the washing machine in the kitchen or bathroom. 230 V ~/ 9 V = 1,5 VA 8 29128442 0,5 00530561 1,7 00533740 0,9
Building Services: Drainage Item Description Mat. No. [kg] E 64 Moisture sensor F 1 19072366 0,2 E70 As contactor for AS 0, AS 2 or AS 4 alarm switchgear or LevelControl, with 3-metre connection cable, 40 C max., not suitable for steam and condensate. Possible applications for alarm transmission: - Water alert signal at a water level of just 1 mm (!) by placing the contactor on the floor of rooms subject to a flooding risk, e.g. the cellar or next to the washing machine in the kitchen or bathroom. Horn, 12 V DC, 105 db(a), 1.2 W For indoor and outdoor installation, to be mounted in a position where it is protected from direct rain, IP 54 enclosure 01086547 0,1 E 330 KSB washing machine interrupter Alarm triggered, with automatic interruption of power supply to the washing machine if the water level in the collecting tank is too high 230 V AC, 50/60 Hz, max. 16 A ohm resistive load Includes: Housing with socket and plug Buzzer Automatic re-start M 1 K contactor with 5-metre connection cable 01318215 0,279 9
KSB Aktiengesellschaft 67225 Frankenthal Johann-Klein-Str. 9 67227 Frankenthal (Germany) Tel. +49 6233 86-0 Fax +49 6233 86-3401 www.ksb.com 2336.52/01-EN 24.04.2012