YAH Series Air Handling Units

YAH Series Air Handling Units

YAH Series Air Handling Units YAH Product Features YAH Series Air Handling Units Johnson Controls YORK YAH ceiling mounted cabinet fan coil units are terminal points of central airconditioning systems. They are designed for fresh air units or to cool, heat, humidify and dehumidify, filter and clean the air, etc. The conditioned air can be delivered to locations across various distances via specially designed ducts. The units are especially suitable for the airconditioning of commercial buildings and industry applications. YORK YAH series air handling units have different models. The cooling ranges from kw to kw, and air flow from 00 to 000. Rated external total pressure ranges from 0 to 3 Pa. More external total pressure can be provided for flexible application. ach unit is made from galvanized steel with mm thick polyester fiber insulation. It contains a builtin cooling coil and fan, and externally mounted nylon air filters. Cooling and heating coil use copper tubes with hydrophilic aluminium fins. The fan, motor and belt pulley are all highquality products producing stable and efficient performance. The fan is a forward curved centrifugal model that works on double air inlets. The motor features IP and a type F insulation with selflubricating bearings. The externally mounted filter can be withdrawn from side or bottom. Features asy installation Lower unit height for low head floor ceiling application Low noise Filter can be maintained from side or bottom fficiency Heat xchanger quality copper tube and aluminium fin Better heat transfer efficiency fficiency Motor Wellknown brand motors I3 motor efficiency Low operating cost VSD motor optional Nomenclature & Feature YAH:YORK ceiling mounted air handling unit Nominal airflow: model code X 0 3 Fan drive type: BBeltdriver fan SJet nozzle Casing Type: SSingke skin mm insulation DDouble skin mm insulation Cooling coil: N cooling H cooling Heating coil: 0Without heating coil Row heating coil Rows heating coil lectric heater vaporative humidifier: 0Without humidifier 0mm humidifier 00mm humidifier 30mm humidifier YAH 0 B S N 0 0 0 0 0 0 L A Design serial number: xternal total pressure code: AY; external total pressure; 0Special air flow Pipe connection: LLeft handling RRight handling Air condition: 0Return air condition XFresh air condition Power supply: 030V/3N~/0Hz C30V/3N~/0Hz DV/3N~/Hz 30V/3N~/Hz F30V/3N~/Hz TiO: 0Without TiO; TTiO Filter: 0G(Nylon) filter AG(Aluminium mesh) filter BG3 Plate filter CG Plate filter DF Plate filter lectrostatic precipitator Optimized Casing Structure Smooth surface, elegant profile Inner surface with aluminium foil surface, quality upgrade Ceilingmounted design with firm and stable frame Steel bolts, nuts, screws with special treatment, enhanced corrosion resistance Galvanized steel with mm thick polyester fiber insulation Optional mm thick double skin construction with better heat insulation Quiet Operation quality material: fan and motor Double inlet, forward curved blade centrifugal fan Less vibration Low noise motor with belt drive ach fan has been dynamically and statically balanced Performance Heat Insulation New polyester fiber insulation Good thermal insulation performance Noncombustible type, good fire resistance 3

Specifications YAH Series Air Handling Units Main Technical Data YAHFB YAH0B 00 000 Nominal external total pressure (Pa) 00 00 0 0 Max. external total pressure (Pa) 3 0 30 Nominal cooling Return air condition Fresh air condition..3..... 3. Nominal heating Return air condition Fresh air condition 3.....3. 3. 3.3 Fan type Motor type Motor power 0. 0. Dimensions (mm) Width Height 0 3 Weight (kg). The weight listed in the table is the shipping weight.the operation weight of unit is about 0% more than the shipping weight.. return air cooling conditions: air inlet at C DB/.WB; chilled water inlet/outlet at C/ C. 3. return air heating conditions:air inlet at C DB; hot water inlet/outlet at C/0 C.. Cooling conditions of fresh air unit: air inlet at 3 C DB/ C WB; chilled water inlet/outlet at C/ C. YAHFB B YAH0B YAH0B YAH0B YAH0B YAH0B YAH0B YAHB 00 000 000 00 000 000 0000 000 30 30 0 0 0 300 0 0 00 0 0 0 0 30 3 0 0 3 3 0 30 0 0 3.3...3 33. 3.. 3.... 30. 3...3...0. 3. 0. 3.... 33.. 3...0 0.. 03. 3.0 0.0 0..3. 3... 3.. 0... 33.3.0... 0.0. 0. 3..0...3. 0. 0.. 3..... 0.0 30.. 0. efficient, double air inlets forward curved 3Ø asynchronous motor, F class insulation, IP 0. 0...... 3.0 3.0 00 00 00 0 00 0 0 00 0 0 0 3 3 0 0 3 0 3 0 3 3. Heating conditions of fresh air unit: air inlet at C DB; hot water inlet/outlet at C/0 C.. xternal total pressure: the sum of velocity pressure and static pressure at the air discharge outlet (exclude the pressure drop across the unit). For fourpiped unit, heating coil is in the front of the cooling coil in the direction of air flow.. If the unit has TiO, evaporative humidifier or split coil (cooling+heating) option, the external total pressure should be deducted by the responding air drop pressure The unit performance is based on m altitude, the variance of altitude will affect the unit performance Altitude correction factors YAHB 000 3 3 3...... 3...0 00 3 3 3 Altitude(m) 300 00 00 00 00 Total heat 0. 0. 0. 0. 0.3 Sensible heat 0. 0.0 0. 0.3 0.0 Note: The above is only for reference. Please contact our local office for detailed data. YAHD vaporative Humidifier Performance YAHFB YAH0B YAHFB B YAH0B 00 000 00 000 0mm 3 Air pressure drop (Pa) Fresh air humidification (kg/h) Mixed air humidification (kg/h) Weight (kg) 00mm 0 0 mm 0mm 3 00mm 0 0mm 0 3 0 0mm 3 00mm 0 3 0mm 0 0mm 3 00mm 0mm 0 0 lectric Wiring Diagrams lectric Connection:. The direct start schematic diagram (Fig.) is for motor up to.kw. The Y start schematic (Fig.) for motors more than.kw.. The dashed lines is provided by customer and it should be connected according to Fig. or Fig.. Please ensure that all connections are tightened. YAH0B YAH0B YAH0B YAH0B YAH0B YAHB YAHB 000 00 000 000 0000 000 000 3 3. The evaporative humidification is an isenthalpic process, which is only suitable for comfort airconditioning, and not suitable for the applications where high precision of humidity control is required. 0 0 3. When the unit is equipped with a evaporative humidifier. The external static pressure of unit should be deducted by air pressure drop across the humidifier. 3. Fresh air humidification conditions: C DB; 0% RH. Face velocity less than 3.0m/s.. Mixed air (fresh air ratio at 030%) humidification condition: C DB; % RH. Face velocity less than 3.0m/s. 3 30 3. The above net weight includes the weight of evaporative humidifier, stainless steel frame and water distribution box; the operation weight of the evaporative humidifier is about 0% more than the unit.. The face velocity of direct feeding evaporative humidifier is the same as those of coils. 3 3 0 0 3 30 3 0 3 3 3 33 0 33 3 3. All electric connections should comply with local electric installation codes.. The ground terminal of the unit must be connected to the ground terminal in the control panel.. Customer should connect the power and control devices and supply shortcircuit and over heat protection. for placing an order:. The motor power is 30V/3N0Hz, 30V/3N/0Hz, V/3N/Hz, 30V/3N/Hz or 30V/3N/Hz, wires.. The unit is equipped with plate type prefilters at the return air intake. 3. When placing an order, the pipe direction (left connection or right) should be noticed (note: facing the return air intake, it is the right if the inlet/outlet water pipes are on the right side of unit and vice versa).. The airflow rate and total pressure should be noticed when placing an order.. If starter is required, it should be noticed when placing an order (an option).

Specifications YAH Series Air Handling Units Main Technical Data Unit Drawings Width Height Supply air flange size Piping position A B C D F G H J K L M N Return air flange size P Q Coil piping (Connection diameter) R Single Fan Units Double Fan Units YAHFB 00 0.. 30. 3. 0 30 YAH0B 000 3.. 30. 3. 30 YAHFB 00 00.. 30. 3. 0 30 B 0 00.. 30. 3. 0 3 YAH0B 000 0 0.. 30. 0. 0 YAH0B 000 00. 3 3. Ø YAH0B 00 0 3. 0. 3 3. Ø YAH0B 000 0 3. 0. 3 3. 00 Ø YAH0B 000 00. 0. 3 3. 0 Ø YAH0B 0000 00 0 3. 0 3.3.. 0 3 0 Ø Ø YAHB 000 00 0 3. 3 3 3 3.3.. 0 3 00 Ø Ø YAHB 000 00 3. 33 0 3.3.. 0 3 Ø Ø. When G is, the unit has only one air supply duct connection.. The coil pipe connections use male threads (thread code R), the corresponding imperial diameters are: 3mm mm/ mm/ mm mm/ mm3 3. The condensate pipe connections use 3mm O.D. male threads (thread code R).. All dimensions are SI unit (mm). The above applies to left hand unit.

Options YAH Series Air Handling Units Industry Leading Technology NanoTi0 Healthy Air Sterilizer (Optional) Johnson Controls is committed to providing comfortable and healthy living and working environment for all our customers. Whilst caring and safeguarding the natural environment outside. With indoor air quality becoming a crucial global health concern, our unique nanotio healthy air sterilization technology can help remove almost all airborne germs and pathogens, ensuring healthy and fresh indoor air supply. By oxidising and decomposing the harmful substances in the air, YORK NanoTiO healthy sterilization technology kills airborne germs, eliminates odors, and removes microbes and other harmful particles safely and efficiently. Biological pollutant e.g. bacteria and germs Organic pollutant volatile organic compounds (VOCs) e.g. formaldehyde, benzene Molds, fungi Inorganic gaseous pollutant e.g. NOx, Sox Smoke and offensive odours Nanograde TiO has been recognised in countries and is patentpending TiO photocatalysis not only filters bacteria but also kills them The ultraviolet light (UVA) in NanoTiO Healthy Air Sterilizer is designed to be durable, lasting up to 0,000 hours The technology has been tested by the following institutes and organisations: The Hong Kong Polytechnic University, Report No. P00 The Productivity Council of Hong Kong, Report No. 000 The Detection Centre of Microbiology, Guangzhou, PRC, Report No. 000 lectrostatic Precipitator Key Features purification efficiency PM. remove efficiency up to % Capture up to % of airborne pollutants to create clean air nergy saving Low resistance to airflow compare to mechanical media filter,reduce the energy consumption of air terminal fan section. lectrostatic precipitator operating process Low operating and maintenance costs lectrostatic precipitator attracts and captures charged dust and dirt particles on aluminum plates that are simply lifted out and rinsed off in the sink. Not only is this responsible to the environment but there are no expensive filters to replace NanoTiO healthy air sterilization technology contains the following features: YORK is the first brand in the industry to apply Nanograde TiO technology to fan coils, residential and commercial central air conditioners, and residential split units. TiO Healthy Air Sterilizer If the Nanograde TiO sterliser is ordered by customers, it will be installed on the YAH unit by the manufacturer prior to shipping. A highvoltage ionizer within the air cleaner electrically charges airborne pollutants and particles. lectronic air cleaners feature electrostatic precipitators a series of metal collection plates that are oppositely charged to the ionized particles. The negative filter plate then attracts and captures these microscopic particles, preventing them from being recirculated into the room. Connection frame No. Connection flange dimension Lamp input power (W) lectrostatic precipitator. Power of ultraviolet lamp is 0V ~/0Hz or 0V ~/Hz. Do not stare at the ultraviolet lamp for long time to prevent eye injury. YAHF YAH0 YAHF YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH YAH TiO YAHF TiO YAH0 TiO YAHF TiO TiO YAH0 TiO YAH0 TiO YAH0 TiO YAH0 TiO YAH0 TiO YAH0 TiO YAH TiO YAH. The relevant wiring of interlock control between sterilizer and YAH unit should be supplied by customer, i.e. the sterilizer starts when the indoor fan is turned on; and the sterilizer stops when the indoor fan is turned off. 0 0 0 0 00 0 0 00 30 30 30 3 3 x 3 x 3 x x x x x x x x x x YAH0 YAHF YAH0 YAHF YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH YAH lectrostatic precipitator size lectrostatic precipitator size Filter Quantity xwidthxheight (mm) P Q x0x30 0 30 XX30 0 30 xx30 30 xx30 0 30 xx3 0 3 xx3 0 3 xx3 X0X3 xx3 xx3 x0x3 00 xx3 0 xx xx 0 xx 00 xx

Options lectric Heater Key Features The electric heater employs stainless steel tube with helical stainless steel fins and temperature protection switch, etc. The electric heater element is installed on the slide frame and ease to pull out for repair or replacement. lectric control box is supplied and installed by the user. And its control must be interlocked with the fan. Features 3 steps control, to satisfy various needs of heating power; Overheating protection: Builtin temperature protection switch shall automatically shut off when the temperature is too high. Primary automatic reset thermal protection: 0 / 0. Secondary thermal fuse protection:0 Suitable for preheating winter fresh air to prevent the coil from frost crack. YAH0 YAHF YAH0 YAHF YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH YAH Maximum electric heating power Stage of electric heating power kw Stage Stage 3 Stage.3.3.. 0. 0. 3. 3. 3. 3. 3. 0........ 3......3.3.3..3.3.3 Jet Units York YAH jet unit is the ideal solution for large space place such as airport hall,station hall, supermarket, exhibition hall and other large space. The nozzle is a hollow doublelayer structure, inner layer design is based on the principle of optimum aerodynamics, with a long range, low noise and low resistance. The nozzle can be adjusted ±30 YAH jet unit can optional highend Titus ND series nozzle diffuser. ND series spherical nozzle adopts the best aerodynamic nozzle structure design, beautiful appearance and achieve to control the noise ideally jet Unit Main Technical Data YAHFS YAH0S YAHFS S YAH0S YAH0S YAH0S YAH0S YAH0S YAH0S YAHS YAHS Diameter Range Width Height Supply air flange size of nozzle of nozzle Unit net weight A B C D G H F Nozzle Number mm m. When G is, the unit has only one air supply duct connection.. The left hand is shown in the figures. Unit Drawings 00 30 0 3 3 000 30 3 30 30 0 03 0 00 30 00 3 3 0 3 3 30 0 33 3 0. 3 0 3 3 000 3 0 3 0. 00 000 0 00 3 0 00 00 0 0 00 0 000 0 0 3 0 3 00 000 0 00 3 0 3 00 3 0000 00 0 3 3 00 3. 00 3 33 000 00 0 3 3 3 00 3. 3 00 3 3 33 000 00 3 3 3. 3 00 3 0 H Application Guide C D G (F)XG B3 B A ØDc A+0 A+0 Kg Kg Ceiling air handling unit with nozzle diffuser mainly used for longdistance directly air supply without air pipe. Cooling and heating calculation are same with normal air handling units. The units with nozzle diffuser should be selected according to the air supply distance, the installation height of the air handling unit, supply air temperature, indoor temperature, air flow rate and meet the following basic requirements. Treated air delivered to the designated location. Cold airflow will not fall midway, causing person discomfort 3. The temperature difference of supply air meets the design requirements Design selection should consider the influence and interaction on the air outlets of multiple units. The nozzle diffusion width is about 0. times of the range. Unit arrangement density is appropriate to slightly less than the width of diffusion. If the unit installed close to ceiling, the impact of attached airflow should be considered. The range of attached airflow is about. times that of the normal airflow. 0

Options Double Skin Unit Key Features Intensity Casing The cabinet adopts a double skin frameless structure, and the panel is a sandwich structure, wherein both the inner and outer plate have bending edges, and the middle of panel with highdensity polyurethane foaming, which makes the panel difficult to deform under the condition of larger size.the panels are externally fastened with screws. Low Air Leakage A wavy dot is raised on the PVC profile, and a plurality of linear seals are formed on the entire contact surface with the weather resistant P sealing strip. Avoid hard contact and eliminate every leak Better Heat Insulation PVC profiles are inserted between the inner and outer plates of the foaming panel, so as to eliminate the heat and cold transmission inside and outside the cabinet, better enhance the heat insulation performance Nature legance The outer surface of the cabinet has no PVC leakage, and the appearance is generous. The smooth inner surface without dead angle, and the integral foaming drain pan can make the condensed water drain smoothly, prevent the hidden danger of water leakage at the joint. Deter thebacteria growth, showing a pleasant appearance also ensures the safety in use. xcellent Sound Reduction mm thickness high strength foam panel can effectively improve the sound insulation of the cabinet, the fan and motor is installed with Integral shockabsorbing structure, and with high quality rubber cushion, filter the fan and motor most vibration to optimize the source noise Double Skin Unit Main Technical Data Unit Drawings Single Fan Units P Double Fan Units P Width Height Supply air flange size Piping position Return air flange size Coil piping Weight(kg) YAH0AD A B C D F G H J L M N P Q 000 3 0. 300 30. 30. 3 0 30 Φ3 Φ3 3 K R Kg Kg 3 D Q C Ø.3 3 D G Q C Ø.3 YAHFAD 00 3.. 30. 3 0 30 Φ3 Φ3 YAH0AD 000 3 3. 30. 3 30 Φ3 Φ3 YAHFAD 00 0 3. 30. 3 0 30 Φ3 Φ3 AD YAH0AD 3.. 30. 3 0 3 Φ3 Φ 30 000. 330. 30. 0 Φ Φ 3 3 A A+0 A+0 A A+0 A+0 YAH0AD 000. 300 3 3. 3. 3 Φ Φ YAH0AD 00. 300. 3. 3 Φ Φ YAHFBD 00 3 3. 30. 3 0 30 Φ3 Φ3 0 YAH0BD YAHFBD BD 000 3 3. 30. 3 30 Φ3 Φ3 03 00 0 3 3. 30. 3 0 30 Φ3 Φ3 3. 30. 3 0 3 Φ3 Φ B3 B K J B3 B K J YAH0BD 000 3. 30. 0 Φ Φ 0 YAH0BD YAH0BD YAH0BD YAH0BD 000. 3. 3 Φ Φ 0 00.. 3. 3 Φ Φ 0 000. 0 3. 3 00 Φ Φ 3 000 0. 0 3. 3 0 Φ Φ 3 H F R " R U L M N H F R " R U L M N YAH0BD YAHBD 0000. 0 0. 0. 0 Φ Φ 30 000. 3 3 3 0. 0. 00 Φ Φ 3 3 The above applies to left hand unit. YAHBD 000. 33 0 0. 0. Φ Φ 0. When G is, the unit has only one air supply duct connection.. The coil pipe connections use male threads(thread code R), the corresponding imperial diameters are: 3mm mm/ mm/ mm mm/ mm3 3. The condensate pipe connections use 3mm O.D. male threads(thread code R).. All dimensions are SI unit(mm). 3

Cooling/Heating Capacity Table Row, Rows Coil Heating Capacity Table YAHF YAH0 YAHF YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH YAH 00 000 00 000 000 00 000 000 0000 000 000 Rows Total cooling...3. 3.3.... 30..3 3. 33.. 3..3.. 3....0... return air cooling conditions: air inlet at C DB/.WB; chilled water inlet/outlet at C/ C.. return air heating conditions:air inlet at CDB; hot water inlet/outlet at C/0 C. 3. Cooling conditions of fresh air unit: air inlet at 3 C DB/ C WB; chilled water inlet/outlet at C/ C. Cooling Capacity Heating Capacity Return air condition Fresh air condition Return air condition Fresh air condition Sensible cooling... 0...0...3.0 0.3.. 30.. 3. 3.0... 3.... Flow Rate 0.3 0. 0.3 0. 0.30 0. 0..0.0..3...0.3.3.3. 3.0 3. 3....3 Pressure Drop (kpa). 0..... 0.0..0..... 3......... 3. Total cooling... 3.. 3. 3.. 0..0 3. 0.... 03.. 3.0 33. 0.0. 0... Sensible cooling.0 0. 0. 3..3.. 0....3 3. 3.3 3. 3..... 3.... 0. Flow Rate 0....0.3.3...33 3. 3.0 3.3 3.3.0 3.0...3.33.0...3.30 Pressure Drop (kpa) 0........ 0.. 3.0.3 0. 00....3..3..... Total heating 3.....3.. 33.3 3..0.... 3... 0.0 0... 0... Flow Rate 0.3 0.0 0. 0.33 0.3 0. 0.3 0.0 0.3..3.3.0..30.33.3..3. 3.03 3. 3.0.3 Pressure Drop (kpa) 3. 3. 3.. 3.. 3. 3.. 3.. 3. 3. 3.. 3.. 3. 3.. 3. 33. 0. 30. Total heating.3 3.. 3.3 3. 3..0......3.. 0.0 0. 30. 0... 0. 3.. Flow Rate 0. 0. 0.30 0. 0.3 0.3.000.3.0.0..3.3..3..3 3. 3..0.3..3.30 Pressure Drop (kpa) 30..... 0.. 0...3.3 3..3..... 3.. 30..3 3.. YAHF YAH0 YAHF YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH YAH 00 000 00 000 000 00 000 000 0000 000 000 Rows. return air heating conditions:air inlet at CDB; hot water inlet/outlet at C/0 C.. Heating conditions of fresh air unit: air inlet at C DB; hot water inlet/outlet at C/0 C. 3. For fourpiped unit, heating coil is in the front of the cooling coil in the direction of air flow. Total heating.3.3.3. 3...3 3.0.... 3.. 3..... 3. 3. 0. Return air condition Flow Rate 0. 0.0 0. 0. 0. 0.33 0.3 0. 0.3 0. 0.0 0. 0. 0. 0.3 0. 0..0 0.0. 0...0. Pressure Drop (kpa) 3.0.0.0.0 0..3 0.. 0.. 0..3..... 3. 3.0 3.0.0.0 0.0 0.0 Total heating..... 0. 3..3. 3. 3.... 3.3. 3.. 0..... Fresh air condition Flow Rate 0. 0.30 0. 0.0 0. 0. 0.33 0. 0.3 0.0 0..00 0.. 0..3 0...00...3.. Pressure Drop (kpa).0.0..0 0. 3.0... 3.. 3. 3. 3. 3.....0.0 3.0.0.0.0. Heating conditions of fresh air unit: air inlet at C DB; hot water inlet/outlet at C/0 C.

Office Locations Australia (Sydney) Tel: + () 0 300 Fax: + () China (Shanghai) Tel: + () 000 Fax: + () Hong Kong Tel: + 0 00 Fax: + India (Mumbai) Tel: + () 3 000 Fax: + () 3 00 Indonesia (Jakarta) Tel: + () 3 00 Fax: + () 3 300 Japan (Tokyo) Tel: + (3) 3 0 Fax: + (3) 3 Korea (Seoul) Tel: + 3 Fax: + 3 Macau Tel: +3 0 Fax: +3 Malaysia (Kuala Lumpur) Tel: + (3) 300 Fax: + (3) 0 New Zealand (Auckland) Tel: + () 3 Fax: + () 0 Singapore Tel: + 00 Fax: + 3 0 Thailand (Bangkok) Tel: + () 00 Fax: + () 3 Manufacturing/assembly: Guangzhou, China; Selangor, Malaysia PUBL0(0)