R22 IR COOLED HIGH STTIC DUCTED SPLIT SYSTEM Single & Double Skin Evaporator Units Cooling Capacity : 80 to 750 MBH
Innovative Outstanding DESIGN & PERFORMNCE IR COOLED CONDENSING UNITS SYSTEM FETURES & CONSTRUCTION GENERL DESCRIPTION The TCCS_F series with new features is suitable for hotel, office, hospitals, schools, factory and supermarket applications. The low noise and compact series are completely leak tested, evacuated, dehydrated and charged with dry nitrogen to maintain system dryness prior to field piping connections. MODULR CONDENSING UNIT Independent outdoor unit module of, & Btu/hr are connected to one indoor unit to achieve the rated cooling capacity from to 750,000 Btu/hr. SCROLL (S) ciency, low noise and high reliability of Hermetic Scroll Compressor(s) designed with support on rubber mounting to minimize vibration. Hermetic Scroll Compressor(s) type operating at 2950 rpm. No contact scroll design that minimizes friction, increase volumetric efficiency and reduces vibration, thus longer service life. 100% suction gas cooled motor. Low power consumption with high EER and no crankcase heater required. ith internal line break or solid state motor protectors. High low pressure cut~out safety control device is provided to protect compressor from high discharge pressure and system leakage. FLEXIBLE CONDENSER IR DISCHRGE The condensing unit air discharge can easily be converted at site to suit the installation space by moving the condenser fan assembly from top to side discharge. (pplicable model for TCCS 100 F, TCCS 125 F & TCCS 150 F only) EFFICIENT CONDENSER COIL Staggered row of 3/8 (9.5) OD inner groove copper tubes with 25 to 30 % more surface area guarantee better heat transfer. Mechanically expanded into die-formed corrugated aluminium fins. Integral subcooling circuit to maximize system efficiency and reduce flash gas formation. Coil fully leak pressure tested on 450 psig (30 bar). ccess port provided on discharge and suction lines for pressure measurements and charging. CSING CONSTRUCTION Constructed from electro-galvanized heavy steel sheet to ensure units casing rigidity and eliminate vibration. Panels are painted with epoxy polyester powder coating for excellent finish, weather ability and corrosion resistance against severe external conditions. FULL LEKGE TEST ON REFRIGERNT CIRCUIT Leak and pressure tested at 450 psig (31 bar). Pressure ports are provided on the discharge, liquid and suction line. Evacuated, dehydrated and pressurized with dry nitrogen for storage and shipping purpose. MULTIPLE By cycling off compressor(s) operation to match building load, no energy is being wasted when room load requires lesser cooling capacity. No total shut down when servicing or repairing a faulty compressor. 3 phase induction condenser fan motor. IP 55 Class F construction ensure extra motor protection. Fan motor operating speed at 950 RPM with high starting torque and low noise fan operation. 1
Innovative Outstanding DESIGN & PERFORMNCE EVPORTOR BLOER UNITS SYSTEM FETURES & CONSTRUCTION GENERL DESCRIPTION The ducted evaporator blower units; each consist of an evaporator coil, a centrifugal forward curved blower fan complete with drive package and filters and enclosed in a single / double skin casing cabinetry; are completely factory packaged to provide greater flexibility for all kinds of application. These flexibility includes; wide range of model sizes covering cooling capacities from 80 MBH to 750 MBH and each model size also has a wide band of air flow rates (s) covering a wide band of static pressure to meet almost any system demands. VERSTILE PPLICTION Three type of configurations namely, horizontal ceiling ducted type, horizontal floor mounted ducted type and vertical floor standing ducted type (only for Double Skin type), each with various optimal fan discharge arrangements, covering a wider cooling capacitiy range; can be selected to suit any installation requirement and space constraint. The evaporator blower unit can also be provided with optimal accessory sections such as bag filter section, angle filter section and mixing box section. (For Double Skin Unit) DRIVE PCK GE ND BLOER Belt driven drive package offers flexibility on various air flow rate and various static pressure applications. Single large diameter double inlet double width blowers (MC certified) reduce the noise level and eliminates the need for coon transition and eliminates air unbalance. Note: Only the TEB 80 F & TEB 100 F Single Skin use direct drive motor. CBINET CONSTRUCTION SINGLE SKIN EVPORTOR UNIT Casing constructed with durable electro-galvanized heavy gauge steel sheet and insulated with () or 13 thick x 1 lb/ft3 (24/m3) PE Foam. esthetically painted with epoxy polyester powder coating to provide excellent finish, weather ability and corrosion resistance. DOUBLE SKIN EVPORTOR UNIT Casing cabinetry are DOUBLE skinned one (1) or 25 thick in fill panels construction from pressure injected polyurethane foam (PU) insulation with K value of 0.02 atts/ o C & density 40 /m 3, sandwiched between galvanized steel sheets. Unique cabinet frame work is constructed from rigid extruded aluminium structural section, locked together by rigid nylon corner jointing modules to form inherent strength stability. Removable panels on the left and right hand side of the unit to provide access to critical parts and components. Panels are painted epoxy powder polyester powder coating for excellent finish, weather ability and corrosion resistance againts severe external conditions. Removable access panels Extruded aluminium rigid structural framework Hydrophilic coated evaporator coil to prevent water carry-over 1 thick polyurethane insulated double skin casing cabinetry Thermal expansion valves control EVPORTOR FN MOTOR High efficiency TEFC motor and dynamically balanced and aligned drive package EVPORTOR COIL Staggered row of seamless inner groove copper tubes mechanically expanded in to die-formed high efficiency corrugated aluminium fins to ensure positive bonding. Independent thermal expansion valve with external equalizer for better refrigerant control and wider load condition. Evacuated, dehydrated and charged with dry nitrogen. Coil fully leak pressure tested to 450 psig. 3 phase squirrel cage induction (TEFC) fan motor of IP55; Class F insulation protection. Fan motor operating speed at 1450 RPM. ll fan motor and drive assembly are internally isolated from unit casing. For horizontal ceiling concealed ducted units capacity range from 80 to 130 MBH, rubber pads are provided, for unit capacity 150 MBH and above, rubber groets are provided. For all floor mounted ducted unit, spring vibration isolators are provided. FILTERS ll standard air filters are 1 thick washable synthetic fiber and designed for easy withdrawal and renewal of filter cells. Flexible loading configurations to meet building requirements. 2
PRODUCT LINE UP MODULR CONDENSING UNIT R22 M od el : TCCS 80 F M od el : TCCS 100 F ~ TCCS 150 F ~ (Horizontal Discharge / Top Discharge) SINGLE SKIN & DOUBLE SKIN EVPORTOR UNITS M od el : TEB 80 F ~ TEB 100 F (SINGLE SKIN / DIRECT DRIVE) M od el : THEB 80 F ~ THEB 150 F (SINGLE SKIN / BELT DRIVE) M od el : THEB 200 F ~ THEB 250 F (SINGLE SKIN) M od el : TFEB 300 F ~ TFEB 750 F (SINGLE SKIN) M od el : THEB 80 FD ~ THEB 250 FD (DOUBLE SKIN) M od el : TFEB 300 FD ~ TFEB 500 FD (DOUBLE SKIN) 3
SPECIFICTIONS R22 THEB ~ TFEB - F Series with Single Skin Evaporator Unit (R22) COOLING CPCITY K THEB 80F TCCS 80F THEB 100F TCCS 100F THEB 125F TCCS 125F THEB 150F TCCS 150F THEB 200F TCCS 100F X 2 THEB 250F TCCS 125F X 2 250,000 73.27 INPUT POER 8,090 10,715 12, 15,850 22,180 25,380 16.2 20.2 22.8 32.8 4 47.2 POER SUPPLY 2,400 3,200 4,000 6,300 7,700 EXTERNL STTIC PRESSURE 0.4 4.0 EVPORTOR BLOER /Drive REFRIGERNT CONTROL 535 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 637 637 1,056 1,256 1,456 1,456 1,655 128 133 138 176 180 280 CONDENSER FN PSC INDUCTION, IP54, CLSS F BRZED (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) THEB ~ TFEB - F Series with Single Skin Evaporator Unit (R22) TFEB 300F TCCS 150F X 2 TFEB 350F TCCS 100F X 1 & TCCS 125F X 2 TFEB 400F TCCS 125F X 2 & TCCS 150F X 1 TFEB 450F TCCS 150F X 3 TFEB 500F TCCS 125F X 4 TFEB 600F TCCS 150F X 4 TFEB 750F TCCS 150F X 5 COOLING CPCITY K 300,000 87.92 350,000 102.58 400,000 117.23 450,000 131.89 500,000 146.54 600,000.85 750,000 219.81 INPUT POER 32,700 36,470 43,230 50,550 50,260 68,400 86,750 67.2 6 83.1 103.1 92.3 139.2.7 POER SUPPLY 9,300 10,500 11,500 13,500 15,000 18,000 22,000 EXTERNL STTIC PRESSURE 1.2 15.0 20.0 EVPORTOR BLOER /Drive REFRIGERNT CONTROL CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 1,610 1,915 1,400 1,400 1,750 1,750 360 385 410 500 500 560 600 CONDENSER FN PSC INDUCTION, IP54, CLSS F (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (3) BRZED (4) (4) (4) (4) (4) (4) (5) (5) (5) (2) (3) (3) (3) (4) (4) (5) (2) (1) & (2) (3) (3) (4) (4) (5) (2) (1) & (2) (2) & (1) (3) (4) (4) (5) LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B ) 4
SPECIFICTIONS THEB ~ TFEB - F7 Series with Single Skin Evaporator Unit (R407C) COOLING CPCITY K THEB 80F7 TCCS 80F7 THEB 100F7 TCCS 100F7 THEB 125F7 TCCS 125F7 THEB 150F7 TCCS 150F7 THEB 200F7 TCCS 100F7 X 2 THEB 250F7 TCCS 125F7 X 2 250,000 73.27 INPUT POER 8,290 10,665 12,240 15, 22,080 25,480 16.6 20.4 22.9 33.7 41.9 47.4 POER SUPPLY 2,400 3,200 4,000 6,300 7,700 EXTERNL STTIC PRESSURE 0.4 4.0 EVPORTOR BLOER /Drive REFRIGERNT CONTROL 535 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 637 637 1,056 1,256 1,456 1,456 1,655 128 133 138 176 180 280 CONDENSER FN PSC INDUCTION, IP54, CLSS F BRZED (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) THEB ~ TFEB - F7 Series with Single Skin Evaporator Unit (R407C) TFEB 300F7 TCCS 150F7 X 2 TFEB 350F7 TCCS 100F7 X 1 & TCCS 125F7 X 2 TFEB 400F7 TCCS 125F7 X 2 & TCCS 150F7 X 1 TFEB 450F7 TCCS 150F7 X 3 TFEB 500F7 TCCS 125F7 X 4 TFEB 600F7 TCCS 150F7 X 4 TFEB 750F7 TCCS 150F7 X 5 COOLING CPCITY K 300,000 87.92 350,000 102.58 400,000 117.23 450,000 131.89 500,000 146.54 600,000.85 750,000 219.81 INPUT POER 32,800 36,520 43,380 50,700 50,460 68,600 87,000 69.0 67.9 84.2 105.8 92.7 142.8 180.2 POER SUPPLY 9,300 10,500 11,500 13,500 15,000 18,000 22,000 EXTERNL STTIC PRESSURE 1.2 15.0 20.0 EVPORTOR BLOER /Drive REFRIGERNT CONTROL CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 1,610 1,915 1,400 1,400 1,750 1,750 360 385 410 500 500 560 600 CONDENSER FN PSC INDUCTION, IP54, CLSS F (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (3) BRZED (4) (4) (4) (4) (4) (4) (5) (5) (5) (2) (3) (3) (3) (4) (4) (5) (2) (1) & (2) (3) (3) (4) (4) (5) (2) (1) & (2) (2) & (1) (3) (4) (4) (5) 5 LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B )
SPECIFICTIONS THEB ~ TFEB - F4 Series with Single Skin Evaporator Unit (R4I0) COOLING CPCITY K THEB 80F4 TCCS 80F4 THEB 100F4 TCCS 100F4 THEB 125F4 TCCS 125F4 THEB 150F4 TCCS 150F4 THEB 200F4 TCCS 100F4 X 2 THEB 250F4 TCCS 125F4 X 2 250,000 73.27 INPUT POER 8,290 10,665 12,240 15, 22,080 25,480 16.6 20.4 22.9 33.7 41.9 47.4 POER SUPPLY 2,400 3,200 4,000 6,300 7,700 EXTERNL STTIC PRESSURE 0.4 4.0 EVPORTOR BLOER /Drive REFRIGERNT CONTROL 535 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 637 637 1,056 1,256 1,456 1,456 1,655 128 133 138 176 180 280 CONDENSER FN PSC INDUCTION, IP54, CLSS F BRZED (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) THEB ~ TFEB - F4 Series with Single Skin Evaporator Unit (R4I0) TFEB 300F4 TCCS 150F4 X 2 TFEB 350F4 TCCS 100F4 X 1 & TCCS 125F4 X 2 TFEB 400F4 TCCS 125F4X 2 & TCCS 150F4 X 1 TFEB 450F4 TCCS 150F4 X 3 TFEB 500F4 TCCS 125F4 X 4 TFEB 600F4 TCCS 150F4 X 4 TFEB 750F4 TCCS 150F4 X 5 COOLING CPCITY K 300,000 87.92 350,000 102.58 400,000 117.23 450,000 131.89 500,000 146.54 600,000.85 750,000 219.81 INPUT POER 32,800 36,520 43,380 50,700 50,460 68,600 87,000 69.0 67.9 84.2 105.8 92.7 142.8 180.2 POER SUPPLY 9,300 10,500 11,500 13,500 15,000 18,000 22,000 EXTERNL STTIC PRESSURE 1.2 15.0 20.0 EVPORTOR BLOER /Drive REFRIGERNT CONTROL CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 1,610 1,915 1,400 1,400 1,750 1,750 360 385 410 500 500 560 600 CONDENSER FN PSC INDUCTION, IP54, CLSS F (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (3) BRZED (4) (4) (4) (4) (4) (4) (5) (5) (5) (2) (3) (3) (3) (4) (4) (5) (2) (1) & (2) (3) (3) (4) (4) (5) (2) (1) & (2) (2) & (1) (3) (4) (4) (5) LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B ) 6
SPECIFICTIONS R22 7 THEB ~ TFEB - FD Series with Double Skin Evaporator (R22) COOLING CPCITY INPUT POER POER SUPPLY EXTERNL STTIC PRESSURE EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive THEB 80 FD TCCS 80F 8,090 16.2 2,400 0.4 677 1,226 1,376 1,576 1,575 1,775 2,235 874 872 872 1,061 1,061 1,161 188 213 265 300 496 590 THEB 100 FD TCCS 100 F 10,715 20.2 3,200 777 THEB 125FD TCCS 125F 12, 22.8 4,000 777 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) THEB 150FD TCCS 150F 15,850 32.8 980 PSC INDUCTION, IP54, CLSS F BRZED THEB ~ TFEB - FD Series with Double Skin Evaporator (R22) COOLING CPCITY INPUT POER POER SUPPLY EXTERNL STTIC PRESSURE EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive TFEB 300FD TCCS 150F X 2 300,000 87.92 32,700 67.2 9,300 1,240 1,410 (2) (2) (2) (2) (2) (2) TFEB 350FD TFEB 400FD TCCS 100F X 1 & TCCS 125F X 2 & TCCS 125F X 2 TCCS 150F X 1 350,000 102.58 36,470 6 10,500 1,395 1,360 (3) (3) (3) (3) (1) & (2) (1) & (2) 400,000 THEB 200FD TCCS 100F x 2 22,180 4 6,300 4.0 980 (2) (2) (2) (2) (2) THEB 250FD TCCS 125F x 2 250,000 LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B ) 117.23 43,230 83.1 11,500 1,495 1,410 (3) (3) (3) (3) (3) (2) & (1) TFEB 500FD TCCS 125F X 4 500,000 146.54 50,260 92.3 15,000 1.2 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 1,495 2,705 1,475 (4) (4) (4) (4) (4) (4) TFEB 600FD TCCS 150F X 4 600,000.85 68,400 139.2 18,000 15.0 2,755 1,825 (4) (4) (4) (4) (4) (4) 73.27 25,380 47.2 7,800 1,000 (2) (2) (2) (2) (2) (2) TFEB 750FD TCCS 150F X 5 750,000 219.81 86,750.7 22,000 20.0 2,135 2,755 1,865 696 776 935 1140 1280 1360 PSC INDUCTION, IP54, CLSS F BRZED (5) (5) (5) (5) (5) (5)
SPECIFICTIONS THEB ~ TFEB - FD7 Series with Double Skin Evaporator Unit (R407C) COOLING CPCITY INPUT POER POER SUPPLY EXTERNL STTIC PRESSURE EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive THEB 80 FD7 TCCS 80 F7 8,665 17.2 2,600 677 1,226 874 THEB 100 FD7 TCCS 100 F7 10,665 20.3 3,200 THEB 125 FD7 TCCS 125 F7 12,990 24.0 4,300 0.75 3.0 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) THEB 150 FD7 TCCS 150 F7 17,400 36.3 0.75 4.0 PSC INDUCTION, IP54, CLSS F BRZED THEB 200 FD7 TCCS 100 F7 x 2 23,080 43.2 6,600 0.75 (2) (2) (2) (2) THEB ~ TFEB - FD7 Series with Double Skin Evaporator Unit (R407C) COOLING CPCITY INPUT POER POER SUPPLY EXTERNL STTIC PRESSURE EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive 777 1,376 872 TFEB 350FD7 TFEB 400FD7 TCCS 100F X 1 & TCCS 125F X 2 & TCCS 125F X 2 TCCS 150F X 1 350,000 102.58 36,470 6 10,500 (3) (3) (3) (3) (1) & (2) (1) & (2) 400,000 117.23 43,230 83.1 11,500 (3) (3) (3) (3) (3) (2) & (1) 777 1,576 872 980 1,575 1,061 980 1,775 1,061 (2) TFEB 500FD7 TCCS 125F X 4 (4) (4) (4) (4) (4) (4) THEB 250 FD7 TCCS 125 F7 x 2 250,000 73.27 26,980 49.3 7,800 1,000 2,235 1,161 188 213 265 300 496 590 TFEB 450FD7 TCCS 150F X 3 450,000 500,000 131.89 146.54 50,260 50,260 92.3 92.3 14,500 15,000 1.2 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) (2) (2) (2) (2) (2) (2) TFEB 600FD7 TCCS 150F X 4 600,000.85 68,400 139.2 18,000 15.0 (4) (4) (4) (4) (4) (4) TFEB 750FD7 TCCS 150F X 5 750,000 219.81 86,750.7 22,000 1,395 1,495 1,535 1,495 2,135 2,655 2,705 2,755 2,755 1,360 1,410 1,475 1,475 1,825 1,865 776 935 1021 1140 1280 1360 PSC INDUCTION, IP54, CLSS F (4) (4) (4) BRZED (4) (4) (4) THEB 300 FD7 TCCS 150 F7 x 2 300,000 87.92 32,700 67.2 9300 1,240 1,410 696 (2) (2) (2) (2) (2) (2) 20.0 (5) (5) (5) (5) (5) (5) LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B ) 8
SPECIFICTIONS THEB ~ TFEB - FD4 Series with Double Skin Evaporator Unit (R4I0) COOLING CPCITY INPUT POER POER SUPPLY EXTERNL STTIC PRESSURE EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive THEB 80 FD4 TCCS 80 F4 8,665 17.2 2,600 THEB 100 FD4 TCCS 100 F4 10,665 20.3 3,200 THEB 125 FD4 TCCS 125 F4 12,990 24.0 4,300 0.75 3.0 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) THEB 150 FD4 TCCS 150 F4 17,400 36.3 0.75 4.0 PSC INDUCTION, IP54, CLSS F BRZED THEB ~ TFEB - FD4 Series with Double Skin Evaporator Unit (R4I0) COOLING CPCITY INPUT POER POER SUPPLY EXTERNL STTIC PRESSURE EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive 677 777 777 THEB 200 FD4 TCCS 100 F4 x 2 23,080 43.2 6,600 0.75 (2) (2) (2) (2) (2) THEB 250 FD4 TCCS 125 F4 x 2 250,000 73.27 26,980 1,226 1,376 1,576 1,575 1,775 2,235 874 872 872 1,061 1,061 1,161 188 213 265 300 496 590 TFEB 300FD4 TCCS 150F4 X 2 300,000 87.92 32,700 67.2 9,300 1,240 (2) (2) (2) (2) (2) (2) TFEB 350FD4 TCCS 100F4 X 1 & TCCS 125F4 X 2 350,000 102.58 36,470 6 10,500 1,395 (3) (3) (3) (3) (1) & (2) (1) & (2) TFEB 400FD4 TCCS 125F4 X 2 & TCCS 150F4 X 1 400,000 117.23 43,230 83.1 11,500 (3) (3) (3) (3) (3) (2) & (1) 980 TFEB 500FD4 TCCS 125F4 X 4 500,000 146.54 50,260 92.3 15,000 1.2 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 1,495 PSC INDUCTION, IP54, CLSS F BRZED 1,495 2,705 (4) (4) (4) (4) (4) (4) 980 TFEB 600FD4 TCCS 150F4 X 4 600,000.85 68,400 139.2 18,000 15.0 2,755 (4) (4) (4) (4) (4) (4) 49.3 7,800 1,000 (2) (2) (2) (2) (2) (2) TFEB 750FD4 TCCS 150F4 X 5 750,000 219.81 86,750.7 22,000 1,410 1,360 1,410 1,475 1,825 1,865 696 776 935 1140 1280 1360 20.0 2,135 2,755 (5) (5) (5) (5) (5) (5) 9 LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B )
PRODUCT LINE UP R22 M o d e l : TFS 80 F ~ TFS 100 F (SINGLE SKIN ) M o d e l : TVEB 145 DFB ~ TVEB 220 DFB (SINGLE SKIN ) LCD DISPLY PNEL FETURES Standard ireless Remote Controller Centrifugal fan for stronger air throw & better air circulation. nti-mold & durable washable saran net air filter. Built in Electronic Controller complete with auto restart function and wireless remote control. (For model TFS 80 F & TFS 100 F only.) COOLING CPCITY SPECIFICTIONS INPUT POER POER SUPPLY EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive TFS 80F TCCS 80F 8,040 17.1 2,500 2,800 CENTRIFUGL / DIRECT CPILLRY T 1,200 1,200 420 420 130 140 TFS 100F TCCS 100F 10,290 20.4 FETURES Centrifugal fan for stronger air throw & better air circulation. nti-mold & durable washable 1 thick air filter. Belt driven drive packaged. (Standard unit do not include Controller & Thermostat.) SINGLE SKIN FLOOR STNDING FREE BLO EVPORTOR UNITS (R22) TVEB 145 DFB TCCS 125F 2,057 1,549 610 235 PSC INDUCTION, IP54, CLSS F BRZED TVEB DFB TCCS 150F 11,810 15,842 21.7 32.5 4,000 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 2,184 1,549 762 278 TVEB 220 DFB TCCS 100F X 2 20,672 38.1 5,400 2,184 1,829 762 296 (2) (2) (2) (2) (2) SINGLE SKIN FLOOR STNDING FREE BLO EVPORTOR UNITS (R407C) COOLING CPCITY INPUT POER POER SUPPLY EVPORTOR BLOER REFRIGERNT CONTROL CONDENSER FN K /Drive TFS 80F7 TCCS 80F7 8,240 1 2,500 2,800 CENTRIFUGL / DIRECT CPILLRY T 1,200 1,200 420 420 130 140 TFS 100F7 TCCS 100F7 10,240 2 TVEB 145 DFBP TCCS 125F7 2,057 1,549 610 235 PSC INDUCTION, IP54, CLSS F BRZED TVEB DFBP TCCS 150F7 1 15,892 21.8 33.4 4,000 CENTRIFUGL / BELT DRIVE THERMOSTTIC EXPNSION VLVE (TXV) 2,184 1,549 762 278 TVEB 220 DFBP TCCS 100F7 X 2 20,572 38.5 5,400 2,184 1,829 762 296 (2) (2) (2) (2) (2) LL specifications are subject to change by manufacturer without prior notice. Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 35 0 C (DB); indoor on coil temp. 27/19 0 C ( DB / B ) 10
TOPIRE Sales & Services Sdn Bhd (274725-) No. 7-2-2, Block, Megan Salak Park, Jalan 2/125 E, Taman Desa Petaling, 57100 Kuala Lumpur, Malaysia. T: 03-90563228 l F: 03-90562800 l E: tass@topaire.com.my : www.topaire.com.my Printed with Soy Ink CPU.R22.R407C.R410 / 0617