VACPB1 Series Wall Mount Explosion Proof Air Conditioner and Room Pressurization System CSA Certified for Use in Division 2 Locations 60 Hertz Models 50 Hertz, High Ambient, & Custom Designs Available Contact Safe Air Technology Sales Team for Assistance Capacity: 1.5 to 6.0 Ton See VPACPB Series for 7-25 Ton Design Standard Features All Electrical Components UL and / or CSA Certified Maintenance Friendly General Purpose Control Box Included for A/C High and Low Pressure Safety Switches Installed System Shut-down Circuit Provided in Case of Gas or Smoke Detection (Gas Detectors Provided by Others) R-410 Refrigerant Installed Unit Fully Tested for Operational Performance and NEC Compliance Loss of Room Pressure Light Installed COPYRIGHT 2016 Safe Air Technology R0316 Offering The Keys to Success: Quality Pricing On Time Delivery
System Description Safe Air Technology VACPB1 Series Systems are designed to provide cooling, heating, and pressurization for industrial, severe duty, and marine applications. Our standard VACPB1 Series product line has been carefully engineered and manufactured to ensure a quality product that will provide many years of reliable service. Safe Air Technology also has an in-house engineering team that can custom design a VACPB1 Unit to meet your specific needs. Our units are fully tested for operational performance and NEC / IEC Compliance to ensure customer satisfaction and many years of safe operation. Safe Air Technology works with its customers to determine the most appropriate system for the customer s application. Once the correct system has been selected, Safe Air Technology will provide an Engineering Submittal Package for approval prior to the manufacturing of the system Safe Air Technology VACPB1 Series Systems are 3rd Party Certified by CSA International to exceed NEC and IEC ratings. System Applications Industrial Refineries Chemical Plants Offshore Platforms Gas Plants and Pipelines Fuel Transfer Docks and Pumping Stations Analyzer Buildings MCC Rooms Control Rooms Unit Specifications A/C Specifications Pressure Blower Specifications All Electrical Components UL and CSA Approved Maintenance Friendly General Purpose Control Box Included for A/C Explosion Proof Motor and Compressor Overload Protection Installed General Purpose Thermostat Included to Control Room Temperature High and Low Pressure Safety Switches Installed Easily Accessible Condenser Fan Section with Non Sparking Fan Blade System Shut-Down Circuit Provided in Case of Gas/ Smoke Detection (Gas Detectors Provided by Others) Industrial Grade Scroll Compressor R-410 Refrigerant Installed Twin Blowers to Move Air Quickly and Quietly Copper Tubes with Aluminum Fin Coils Installed Unit Fully Tested for Operational Performance and NEC Compliance O & M Manuals Included Certificate of Conformance to Explosion Proof Codes Issued All Electrical Components UL and CSA Approved Pressure Blower Designed to Mount on the Side of A/C System Maintenance Friendly General Purpose Controls integrated with Air Conditioned Controls to be Installed on the inside of the Building Variable Frequency Drive Installed for Pressurization Motor with Overload Protection ¼ Turn Latches on PB Housing for Easy Access to Pressurization Motor and Filter Room Pressure Gauge Installed System Shut-Down Circuit Provided in Case of Gas or Smoke Detection (Gas Detectors Provided by Others) Loss of Room Pressure Light Installed Non Sparking Aluminum Blower Housing Unit Fully Tested for Operational Performance and NEC Compliance O & M Manuals Included N.E.C. Certificate of Conformance to Explosion Proof Codes Issued
Available Options -ADC Adsil Coated Coils and All Copper Lines for Corrosion Protection -B Group B Classification -CC Copper Tube and Copper Fin Coils -CRT Export Crate for Sea/Air Shipping -SD Smoke Detector Installed -CF Custom Filtration Module -WC -XPR -MG1 -MG2 Water Cool Condenser Coil Explosion Proof Receptacle Inside Marine Grade Coating Option 1-Coils and Copper Coated for Corrosion Protection Marine Grade Coating Option 2-Coils, Copper, and Sheet Metal Coated for Corrosion protection -HC Humidity Control -RMT Remote Control Box -DSI Disconnect Switch Installed -DW Double Wall Evaporator Section -EPX -HCC -HG 646 Micro Epoxy Coated Metal For Corrosion Protection Heresite Coated Coils for Corrosion Protection Hot Gas Bypass Valve Installed Available Designs Safe Air Technology Also Offers Standard VACPB1 Systems Designed for the Following Applications -HL -ISV -LAC High and Low Pressure Safety Switches Installed Refrigeration Isolation Valves Low Ambient Controls Installed High Ambient Temperatures The VACPB1 Series Can Be Designed to Operate in Temperatures up to 115 o F (46 o C). Custom Systems Are Available for Applications that Exceed These Temperatures. -LOC Lock Out Switch Installed (Standard) 50 Hertz Power 50 Hertz Power Supply Options Are -MOD -PBD -RT -SH6 NOTE: Custom Modification (See Sales) Pressure Blower Isolation Damper Remote Thermostat 316 Stainless Steel Housing Supply Custom Applications Available, Please Contact Sales for More Information. If your Project Requires an Additional Specification Not Listed in This Catalog, Please Contact the Sales Department for Assistance. If an option you require due to your specifications is not listed, please contact our Sales Engineering Department. We will be happy to assist in ensuring that your system fully complies with your specifications
VACPB1 Series Standard Layout and Design NOTE: This is a Typical VACPB1 Layout Drawing, Consult Sales for a Model Specific Drawing.
VACPB1 Series Standard Control Box Layout and Design NOTE: This is a Typical VACPB1 Control Box Layout Drawing, Consult Sales for a Model Specific Drawing.
VACPB1 Sequence of Operation With the operational T-STAT in the OFF position and the Fan Selector Switch in the AUTO position the Air Conditioner will not operate. Compressor OFF, Fan OFF. With the START button NOT pressed the Pressure Blower will not operate. Pressure Blower OFF Cooling Mode with Room Pressure Steps: Note: When the VACPB1 system is running with pressurization active and you wish to change from HEATING to COOLING. You need only operate the T-STAT COOL HEAT function and set the desired temperature setting. 1. To properly operate the VACPB1 system place the Fan Selector Switch on the T-STAT to the AUTO position. The Fan will energize when called for by the operational T-STAT. ( Fan AUTO is also Available if desired ) 2. On the PB controls place the Selector switch to AUTO Note: The Room Pressure Control Knob will be disabled. It functions as a Set up and Test tool. Also may be used as a backup if there is a component failure in the loop. 3. Press the START button. Pressure Blower will then energize. At this time the room pressure gauge will show a increase in room pressure. Allow the room set point to be reached 0.1 IN/WG, this may fluctuate slightly for a short period. Note: If the MANUAL function is selected. The room pressure will need to be set with the Control Pot. In this mode the system will not automatically ramp up or down to accommodate room pressure requirements. 4. Adjust the T-STAT to the Cool Mode. (T-STAT HAS A 5 MIN. DELAY ) When the T-STAT is in the COOL mode and the desired temp has not been reached the compressor will energize. The unit is now running with pressurization and cooling automatically controlled. Note: On loss of pressure the Pressure transmitter will send a signal to the Power flex to speed up the PB motor to produce the correct amount of air flow to allow the room to stay within NFPA 496 pressurization codes. Once room pressure is lost, the Time Delay relay will energize and provide a 120 volt signal to both the RED LIGHT on the Door, and to a remote Alarm Contact (See Electrical Drawing). Once room pressure is restored the alarm will clear and the unit will reduce air flow to control room pressure.
VACPB1 Sequence of Operation Note: In Heat Mode the Electric Heater contactor will disengage on loss of room pressure after the TDR times out. It will automatically reset once room pressure is restored. As required by N.E.C. (Heater is Pressure Interlocked with room pressurization controls) Heating Mode with Room Pressure Steps: Note: When the VACPB1 system is running with pressurization active and you wish to change from COOLING to HEATING. You need only operate the T-STAT COOL HEAT function and set the desired temperature setting. 1. To properly operate the VACPB1 system place the Fan Selector Switch on the T-STAT to the AUTO position. The Fan will energize when called for by the operational T-STAT. ( Fan AUTO is also Available if desired ) 2. On the PB controls place the Selector switch to AUTO Note: The Room Pressure Control Knob will be disabled. It functions as a Set up and Test tool. Also may be used as a backup if there is a component failure in the loop. 3. Press the START button. Pressure Blower will then energize. At this time the room pressure gauge will show a increase in room pressure. Allow the room set point to be reached 0.1 IN/WG, this may fluctuate slightly for a short period. Note: If the MANUAL function is selected. The room pressure will need to be set with the Control Pot. In this mode the system will not automatically ramp up or down to accommodate room pressure requirements. 4. Adjust the T-STAT to the Cool Mode. (T-STAT HAS A 5 MIN. DELAY ) When the T-STAT is in the COOL mode and the desired temp has not been reached the compressor will energize. The unit is now running with pressurization and cooling automatically controlled. Dehumidification Mode Note: Enable the desired Dehumidification Mode below. Optimal Dehumidification (OD)- when enabled, this feature automatically reduces indoor humidity with a call for Cooling if humidity is 2% above humidity setpoint. Humidity is set by pressing the Humidity key when in the appropriate mode, in this case Cooling, and pressing the OR Keys to set desired humidity level followed by pressing the Humidity key again. This dehumidification feature may use more energy by making dehumidification a priority initiating a call for cooling if humidity is 2% above desired setting. This feature may also over-cool the conditioned space by up to 3 degrees to achieve the desired humidity level. Optimal Comfort (OC)- When enabled, this feature automatically reduces indoor humidity with a call for Cooling if humidity is 2% above humidity setpoint. Humidity is set by pressing the Humidity key when in the appropriate mode, in this case Cooling, and pressing the OR Keys to set desired humidity level (40% to 95 %) followed by pressing the Humidity key again. This dehumidification feature uses less energy by maintaining temperature and dehumidifying only when a call for cooling is required. Note: Both dehumidification modes operate in Cooling Mode only with a call for cooling.
VACPB1 Series 208-230/ 1 Ph / 60 Hz 1.5 Ton Units VACPB1-L-1300A-1-H-D-1.5-5KW(EH/S)-2-ICD2-1C-LOC 18,000 12,799 208-230/1 3.4/3.6 33.7 35 600-.2ESP 1300 500 VACPB1-L-2600A-1-H-D-1.5-5KW(EH/S)-2-ICD2-1C-LOC 18,000 12,799 208-230/1 6.2/6.5 36.5 40 600-.2ESP 2600 500 VACPB1-L-1300A-1-H-D-1.5-10KW(EH/S)-2-ICD2-1C-LOC 18,000 25,598 208-230/1 3.4/3.6 59.7 65 600-.2ESP 1300 500 VACPB1-L-2600A-1-H-D-1.5-10KW(EH/S)-2-ICD2-1C-LOC 18,000 25,598 208-230/1 6.2/6.5 62.5 65 600-.2ESP 2600 500 2.0 Ton Units VACPB1-L-1300A-1-H-D-2.0-5KW(EH/S)-2-ICD2-1C-LOC 24,000 12,799 208-230/1 3.4/3.6 33.7 35 800-.2ESP 1300 525 VACPB1-L-2600A-1-H-D-2.0-5KW(EH/S)-2-ICD2-1C-LOC 24,000 12,799 208-230/1 6.2/6.5 36.5 40 800-.2ESP 2600 525 VACPB1-L-1300A-1-H-D-2.0-10KW(EH/S)-2-ICD2-1C-LOC 24,000 25,598 208-230/1 3.4/3.6 59.7 65 800-.2ESP 1300 525 VACPB1-L-2600A-1-H-D-2.0-10KW(EH/S)-2-ICD2-1C-LOC 24,000 25,598 208-230/1 6.2/6.5 62.5 65 800-.2ESP 2600 525 2.5 Ton Units VACPB1-L-1300A-1-H-D-2.5-5KW(EH/S)-2-ICD2-1C-LOC 24,000 12,799 208-230/1 3.4/3.6 33.7 40 1000-.2ESP 1300 555 VACPB1-L-2600A-1-H-D-2.5-5KW(EH/S)-2-ICD2-1C-LOC 24,000 12,799 208-230/1 6.2/6.5 36.5 40 1000-.2ESP 2600 555 VACPB1-L-1300A-1-H-D-2.5-10KW(EH/S)-2-ICD2-1C-LOC 24,000 25,598 208-230/1 3.4/3.6 59.7 65 1000-.2ESP 1300 555 VACPB1-L-2600A-1-H-D-2.5-10KW(EH/S)-2-ICD2-1C-LOC 24,000 25,598 208-230/1 6.2/6.5 62.5 65 1000-.2ESP 2600 555 VACPB1-L-1300A-1-H-D-2.5-15W(EH/S)-2-ICD2-1C-LOC 24,000 38,396 208-230/1 3.4/3.6 87.7 90 1000-.2ESP 1300 555 VACPB1-L-2600A-1-H-D-2.5-15KW(EH/S)-2-ICD2-1C-LOC 24,000 38,396 208-230/1 6.2/6.5 90.5 95 1000-.2ESP 2600 555 3.0 Ton Units VACPB1-L-1300A-1-H-D-3.0-5KW(EH/S)-2-ICD2-1C-LOC 36,000 12,799 208-230/1 3.4/3.6 35.7 40 1100-.2ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-5KW(EH/S)-2-ICD2-1C-LOC 36,000 12,799 208-230/1 6.2/6.5 38.5 40 1100-.2ESP 2600 555 VACPB1-L-1300A-1-H-D-3.0-10KW(EH/S)-2-ICD2-1C-LOC 36,000 25,598 208-230/1 3.4/3.6 61.7 65 1100-.2ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-10KW(EH/S)-2-ICD2-1C-LOC 36,000 25,598 208-230/1 6.2/6.5 64.5 65 1100-.2ESP 2600 555 VACPB1-L-1300A-1-H-D-3.0-15W(EH/S)-2-ICD2-1C-LOC 36,000 38,396 208-230/1 3.4/3.6 87.7 90 1100-.2ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-15KW(EH/S)-2-ICD2-1C-LOC 36,000 38,396 208-230/1 6.2/6.5 90.5 95 1100-.2ESP 2600 555 MCA: Minimum Circuit Amapacity MEFC: Maximum External Fuse or Circuit Breaker
VACPB1 Series 208-230/ 1 Ph / 60 Hz 3.5 Ton Units VACPB1-L-1300A-1-H-D-3.5-5KW(EH/S)-2-ICD2-1C-LOC 42,000 12,799 208-230/1 3.4/3.6 36.7 50 1400-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-5KW(EH/S)-2-ICD2-1C-LOC 42,000 12,799 208-230/1 6.2/6.5 39.5 50 1400-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-3.5-10KW(EH/S)-2-ICD2-1C-LOC 42,000 25,598 208-230/1 3.4/3.6 62.7 65 1400-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-10KW(EH/S)-2-ICD2-1C-LOC 42,000 25,598 208-230/1 6.2/6.5 65.5 70 1400-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-3.5-15W(EH/S)-2-ICD2-1C-LOC 42,000 38,396 208-230/1 3.4/3.6 88.7 90 1400-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-15KW(EH/S)-2-ICD2-1C-LOC 42,000 38,396 208-230/1 6.2/6.5 91.5 95 1400-.2ESP 2600 700 4.0 Ton Units VACPB1-L-1300A-1-H-D-4.0-5KW(EH/S)-2-ICD2-1C-LOC 48,000 12,799 208-230/1 3.4/3.6 40.7 50 1550-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-5KW(EH/S)-2-ICD2-1C-LOC 48,000 12,799 208-230/1 6.2/6.5 43.5 50 1550-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-4.0-10KW(EH/S)-2-ICD2-1C-LOC 48,000 25,598 208-230/1 3.4/3.6 62.7 65 1550-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-10KW(EH/S)-2-ICD2-1C-LOC 48,000 25,598 208-230/1 6.2/6.5 65.5 70 1550-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-4.0-15W(EH/S)-2-ICD2-1C-LOC 48,000 38,396 208-230/1 3.4/3.6 88.7 90 1550-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-15KW(EH/S)-2-ICD2-1C-LOC 48,000 38,396 208-230/1 6.2/6.5 91.5 95 1550-.2ESP 2600 700 5.0 Ton Units VACPB1-L-1300A-1-H-D-5.0-5KW(EH/S)-2-ICD2-1C-LOC 60,000 12,799 208-230/1 3.4/3.6 44.7 60 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-5KW(EH/S)-2-ICD2-1C-LOC 60,000 12,799 208-230/1 6.2/6.5 47.5 60 1700-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-5.0-10KW(EH/S)-2-ICD2-1C-LOC 60,000 25,598 208-230/1 3.4/3.6 62.7 65 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-10KW(EH/S)-2-ICD2-1C-LOC 60,000 25,598 208-230/1 6.2/6.5 65.5 70 1700-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-5.0-15W(EH/S)-2-ICD2-1C-LOC 60,000 38,396 208-230/1 3.4/3.6 88.7 90 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-15KW(EH/S)-2-ICD2-1C-LOC 60,000 38,396 208-230/1 6.2/6.5 91.5 95 1700-.2ESP 2600 700 MCA: Minimum Circuit Amapacity MEFC: Maximum External Fuse or Circuit Breaker
VACPB1 Series 208-230/ 1 Ph / 60 Hz 6.0 Ton Units VACPB1-L-1300A-1-H-D-6.0-5KW(EH/S)-2-ICD2-1C-LOC 72,000 12,799 208-230/1 3.4/3.6 52.7 60 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-5KW(EH/S)-2-ICD2-1C-LOC 72,000 12,799 208-230/1 6.2/6.5 55.5 60 1800-.2ESP 2600 750 VACPB1-L-1300A-1-H-D-6.0-10KW(EH/S)-2-ICD2-1C-LOC 72,000 25,598 208-230/1 3.4/3.6 62.7 65 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-10KW(EH/S)-2-ICD2-1C-LOC 72,000 25,598 208-230/1 6.2/6.5 65.5 70 1800-.2ESP 2600 750 VACPB1-L-1300A-1-H-D-6.0-15W(EH/S)-2-ICD2-1C-LOC 72,000 38,396 208-230/1 3.4/3.6 88.7 90 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-15KW(EH/S)-2-ICD2-1C-LOC 72,000 38,396 208-230/1 6.2/6.5 91.5 95 1800-.2ESP 2600 750 VACPB1 Series 208-230/ 3 Ph / 60 Hz 2.0 Ton Units VACPB1-L-1300A-1-H-D-2.0-6KW(EH/S)-3-ICD2-1C-LOC 24,000 15,359 208-230/3 3.4/3.6 25.7 30 800-.2ESP 1300 500 VACPB1-L-2600A-1-H-D-2.0-6KW(EH/S)-3-ICD2-1C-LOC 24,000 15,359 208-230/3 6.2/6.5 28.5 30 800-.2ESP 2600 500 2.5 Ton Units VACPB1-L-1300A-1-H-D-2.5-6KW(EH/S)-3-ICD2-1C-LOC 30,000 15,359 208-230/3 3.4/3.6 27.7 30 1000-.4ESP 1300 525 VACPB1-L-2600A-1-H-D-2.5-6KW(EH/S)-3-ICD2-1C-LOC 30,000 15,359 208-230/3 6.2/6.5 30.5 35 1000-.4ESP 2600 525 VACPB1-L-1300A-1-H-D-2.5-9KW(EH/S)-3-ICD2-1C-LOC 30,000 23,038 208-230/3 3.4/3.6 36.7 40 1000-.4ESP 1300 525 VACPB1-L-2600A-1-H-D-2.5-9KW(EH/S)-3-ICD2-1C-LOC 30,000 23,038 208-230/3 6.2/6.5 39.5 40 1000-.4ESP 2600 525 VACPB1-L-1300A-1-H-D-2.5-15W(EH/S)-3-ICD2-1C-LOC 30,000 38,396 208-230/3 3.4/3.6 54.7 60 1000-.4ESP 1300 525 VACPB1-L-2600A-1-H-D-2.5-15KW(EH/S)-3-ICD2-1C-LOC 30,000 38,396 208-230/3 6.2/6.5 57.5 60 1000-.4ESP 2600 525 MCA: Minimum Circuit Amapacity MEFC: Maximum External Fuse or Circuit Breaker
VACPB1 Series 208-230/ 3 Ph / 60 Hz 3.0 Ton Units VACPB1-L-1300A-1-H-D-3.0-6KW(EH/S)-3-ICD2-1C-LOC 36,000 15,359 208-230/3 3.4/3.6 27.7 30 1100-.3ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-6KW(EH/S)-3-ICD2-1C-LOC 36,000 15,359 208-230/3 6.2/6.5 30.5 35 1100-.3ESP 2600 555 VACPB1-L-1300A-1-H-D-3.0-9KW(EH/S)-3-ICD2-1C-LOC 36,000 23,038 208-230/3 3.4/3.6 36.7 40 1100-.3ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-9KW(EH/S)-3-ICD2-1C-LOC 36,000 23,038 208-230/3 6.2/6.5 39.5 40 1100-.3ESP 2600 555 VACPB1-L-1300A-1-H-D-3.0-15W(EH/S)-3-ICD2-1C-LOC 36,000 38,396 208-230/3 3.4/3.6 54.7 60 1100-.3ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-15KW(EH/S)-3-ICD2-1C-LOC 36,000 38,396 208-230/3 6.2/6.5 57.5 60 1100-.3ESP 2600 555 3.5 Ton Units VACPB1-L-1300A-1-H-D-3.5-9KW(EH/S)-3-ICD2-1C-LOC 42,000 23,038 208-230/3 3.4/3.6 37.7 40 1400-.3ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-9KW(EH/S)-3-ICD2-1C-LOC 42,000 23,038 208-230/3 6.2/6.5 40.5 45 1400-.3ESP 2600 700 VACPB1-L-1300A-1-H-D-3.5-15W(EH/S)-3-ICD2-1C-LOC 42,000 38,396 208-230/3 3.4/3.6 56.7 60 1400-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-15KW(EH/S)-3-ICD2-1C-LOC 42,000 38,396 208-230/3 6.2/6.5 59.5 60 1400-.2ESP 2600 700 4.0 Ton Units VACPB1-L-1300A-1-H-D-4.0-9KW(EH/S)-3-ICD2-1C-LOC 48,000 23,038 208-230/3 3.4/3.6 37.7 40 1800-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-9KW(EH/S)-3-ICD2-1C-LOC 48,000 23,038 208-230/3 6.2/6.5 40.5 45 1800-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-4.0-15W(EH/S)-3-ICD2-1C-LOC 48,000 38,396 208-230/3 3.4/3.6 56.7 60 1800-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-15KW(EH/S)-3-ICD2-1C-LOC 48,000 38,396 208-230/3 6.2/6.5 59.5 60 1800-.2ESP 2600 700 5.0 Ton Units VACPB1-L-1300A-1-H-D-5.0-9KW(EH/S)-3-ICD2-1C-LOC 60,000 23,038 208-230/3 3.4/3.6 62.7 65 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-9KW(EH/S)-3-ICD2-1C-LOC 60,000 23,038 208-230/3 6.2/6.5 65.5 70 1700-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-5.0-15W(EH/S)-3-ICD2-1C-LOC 60,000 38,396 208-230/3 3.4/3.6 88.7 90 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-15KW(EH/S)-3-ICD2-1C-LOC 60,000 38,396 208-230/3 6.2/6.5 91.5 95 1700-.2ESP 2600 700 MCA: Minimum Circuit Amapacity MEFC: Maximum External Fuse or Circuit Breaker
VACPB1 Series 208-230/ 3 Ph / 60 Hz 6.0 Ton Units VACPB1-L-1300A-1-H-D-6.0-9KW(EH/S)-3-ICD2-1C-LOC 72,000 23,038 208-230/3 3.4/3.6 62.7 50 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-9KW(EH/S)-3-ICD2-1C-LOC 72,000 23,038 208-230/3 6.2/6.5 65.5 50 1800-.2ESP 2600 750 VACPB1-L-1300A-1-H-D-6.0-15W(EH/S)-3-ICD2-1C-LOC 72,000 38,396 208-230/3 3.4/3.6 88.7 60 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-15KW(EH/S)-3-ICD2-1C-LOC 72,000 38,396 208-230/3 6.2/6.5 91.5 60 1800-.2ESP 2600 750 VACPB1 Series 460-480/ 3 Ph / 60 Hz 2.0 Ton Units VACPB1-L-1300A-1-H-D-2.0-6KW(EH/S)-4-ICD2-1C-LOC 24,000 18,840 460-480/3 1.7 13.7 15 800-.2ESP 1300 500 VACPB1-L-2600A-1-H-D-2.0-6KW(EH/S)-4-ICD2-1C-LOC 24,000 18,840 460-480/3 3.1 15.0 20 800-.2ESP 2600 500 2.5 Ton Units VACPB1-L-1300A-1-H-D-2.5-6KW(EH/S)-3-ICD2-1C-LOC 30,000 18,840 460-480/3 1.7 13.7 15 1000-.4ESP 1300 525 VACPB1-L-2600A-1-H-D-2.5-6KW(EH/S)-3-ICD2-1C-LOC 30,000 18,840 460-480/3 3.1 15.0 20 1000-.4ESP 2600 525 VACPB1-L-1300A-1-H-D-2.5-9KW(EH/S)-3-ICD2-1C-LOC 30,000 28,620 460-480/3 1.7 18.7 20 1000-.4ESP 1300 525 VACPB1-L-2600A-1-H-D-2.5-9KW(EH/S)-3-ICD2-1C-LOC 30,000 28,620 460-480/3 3.1 20.0 25 1000-.4ESP 2600 525 VACPB1-L-1300A-1-H-D-2.5-15W(EH/S)-3-ICD2-1C-LOC 30,000 47,099 460-480/3 1.7 27.7 30 1000-.4ESP 1300 525 VACPB1-L-2600A-1-H-D-2.5-15KW(EH/S)-3-ICD2-1C-LOC 30,000 47,099 460-480/3 3.1 29.0 30 1000-.4ESP 2600 525 3.0 Ton Units VACPB1-L-1300A-1-H-D-3.0-6KW(EH/S)-4-ICD2-1C-LOC 36,000 18,840 460-480/3 1.7 13.7 15 1100-.3ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-6KW(EH/S)-4-ICD2-1C-LOC 36,000 18,840 460-480/3 3.1 15.0 20 1100-.3ESP 2600 555 VACPB1-L-1300A-1-H-D-3.0-9KW(EH/S)-4-ICD2-1C-LOC 36,000 28,620 460-480/3 1.7 18.7 20 1100-.3ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-9KW(EH/S)-4-ICD2-1C-LOC 36,000 28,620 460-480/3 3.1 20.0 25 1100-.3ESP 2600 555 VACPB1-L-1300A-1-H-D-3.0-15W(EH/S)-4-ICD2-1C-LOC 36,000 47,099 460-480/3 1.7 27.7 30 1100-.3ESP 1300 555 VACPB1-L-2600A-1-H-D-3.0-15KW(EH/S)-4-ICD2-1C-LOC 36,000 47,099 460-480/3 3.1 29.0 30 1100-.3ESP 2600 555 MCA: Minimum Circuit Amapacity MEFC: Maximum External Fuse or Circuit Breaker
VACPB1 Series 460-480/ 3 Ph / 60 Hz 3.5 Ton Units VACPB1-L-1300A-1-H-D-3.5-9KW(EH/S)-4-ICD2-1C-LOC 42,000 28,620 460-480/3 1.7 19.7 20 1400-.3ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-9KW(EH/S)-4-ICD2-1C-LOC 42,000 28,620 460-480/3 3.1 21.0 25 1400-.3ESP 2600 700 VACPB1-L-1300A-1-H-D-3.5-15W(EH/S)-4-ICD2-1C-LOC 42,000 47,099 460-480/3 1.7 28.7 30 1400-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-3.5-15KW(EH/S)-4-ICD2-1C-LOC 42,000 47,099 460-480/3 3.1 30.0 35 1400-.2ESP 2600 700 4.0 Ton Units VACPB1-L-1300A-1-H-D-4.0-9KW(EH/S)-4-ICD2-1C-LOC 48,000 28,620 460-480/3 1.7 19.7 20 1550-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-9KW(EH/S)-4-ICD2-1C-LOC 48,000 28,620 460-480/3 3.1 21.0 25 1550-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-4.0-15W(EH/S)-4-ICD2-1C-LOC 48,000 47,099 460-480/3 1.7 28.7 30 1550-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-4.0-15KW(EH/S)-4-ICD2-1C-LOC 48,000 47,099 460-480/3 3.1 30.0 35 1550-.2ESP 2600 700 5.0 Ton Units VACPB1-L-1300A-1-H-D-5.0-9KW(EH/S)-4-ICD2-1C-LOC 60,000 28,620 460-480/3 1.7 19.7 20 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-9KW(EH/S)-4-ICD2-1C-LOC 60,000 28,620 460-480/3 3.1 21.0 25 1700-.2ESP 2600 700 VACPB1-L-1300A-1-H-D-5.0-15W(EH/S)-4-ICD2-1C-LOC 60,000 47,099 460-480/3 1.7 28.7 30 1700-.2ESP 1300 700 VACPB1-L-2600A-1-H-D-5.0-15KW(EH/S)-4-ICD2-1C-LOC 60,000 47,099 460-480/3 3.1 30.0 35 1700-.2ESP 2600 700 6.0 Ton Units VACPB1-L-1300A-1-H-D-6.0-9KW(EH/S)-4-ICD2-1C-LOC 72,000 28,620 460-480/3 1.7 24.7 30 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-9KW(EH/S)-4-ICD2-1C-LOC 72,000 28,620 460-480/3 3.1 26.0 30 1800-.2ESP 2600 750 VACPB1-L-1300A-1-H-D-6.0-15W(EH/S)-4-ICD2-1C-LOC 72,000 47,099 460-480/3 1.7 28.7 35 1800-.2ESP 1300 750 VACPB1-L-2600A-1-H-D-6.0-15KW(EH/S)-4-ICD2-1C-LOC 72,000 47,099 460-480/3 3.1 30.0 35 1800-.2ESP 2600 750 MCA: Minimum Circuit Amapacity MEFC: Maximum External Fuse or Circuit Breaker
VACPB1-Series Nomenclature Guide VACPB1 L - 1300A - 1 - H- D - 2.0- N - 3 - ICD2-1C - **** VACPB1 Vertical A/C Unit with Pressurization Module Pressure Blower Location L= Left Side R= Right Side D=Dual Pressure Blower Pressure Blower Specifications 1300 CFM A= Attached 2600 CFM S=Stand Alone 3000 CFM Pressure Blower Controls 1= Variable Frequency Drive 2= Constant Flow/ Damper Control Unit Options See Options List on Page 3 ** Please Contact our Sales Department if Your Needed Option is not Listed Control Box Type 1C= General Purpose Controls 2C= Explosion Proof Controls Classification Please Contact our Sales Engineers for Classification Codes Air Flow V= Vertical H= Horizontal Refrigerant Type Power Supply 2= 208-230 V/ 1 Ph/ 60 Hz 3= 208-230 V/ 3 Ph/ 60 Hz 4= 460-480 V/ 3 Ph/ 60 Hz 50 Hz Models Also Available A = R22 C = 134 A B = 407 D = 410 Heating Capacity Cooling Capacity 3.0 = 36,000 BTU/HR = 3 Tons 10KW (EH/S) = Electric Heat / Standard 10KW (EH/XP) =Electric Heat / Explosion Proof N = No Heat Installed
Safe Air Technology Office Locations Safe Air Technology specializes in the engineering and manufacture of Explosion Proof, Corrosion Resistant, and Severe Duty HVAC/R systems and Pressurization Equipment. Our explosion proof, severe duty systems are designed to offer a safe solution at a competitive price. We strive to maintain the highest level of quality in both our systems and services. Safe Air Technology is headquartered in Baton Rouge, Louisiana. This allows us to easily serve many of our petrochemical, oil and gas, and industrial clients. To better serve our clients around the world, Safe Air Technology has international offices in Dubai and Singapore. Our international reach has given us the opportunity to work with clients in over 40 countries to design and deliver durable and reliable explosion proof HVAC/R systems. At Safe Air Technology, we understand that our clients HVAC/R needs are continuously adapting and changing. By forging a relationship with you, we can be better equipped to understand and meet your specific needs as they arise. Our engineering and production team takes pride in every system they deliver, from one of our standard window units to our complex custom design projects. Contact Safe Air Technology and Let Us Help to Keep Industry Safe for Your World. Safe Air Technology Safe Air Technology Safe Air Technology