Wide Gap Transmissive Sensor HOA1888 Series FEATURES Choice of phototransistor or photodarlington output Visible ambient light and dust protective filter 12 mm (0.47 in.) slot width Snap-in housing The HOA1888 Series consists of an infrared emitting diode facing an NPN silicon phototransistor (HOA1888-011) or photodarlington (HOA1888-013) encased in a black thermoplastic housing. Detector switching takes place whenever an opaque object passes through the slot between emitter and detector. Both emitter and detector have 1,52 mm (0.060 in.) x 1,52 mm (0.060 in.) vertical apertures. The sensor housing contains IR (Infrared) transmissive optical windows. This arrangement provides excellent protection against visible ambient light while eliminating aperture openings which could be clogged by airborne contaminants. Housing material is polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. MICRO SWITCH Sensing and Control
Wide Gap Transmissive Sensor HOA1888 Series ABSOLUTE MAXIMUM RATINGS (25 C free-air temperature unless otherwise noted) Operating Temperature Range -40 C to 85 C Storage Temperature Range -40 C to 85 C Soldering Temperature (5 sec) 240 C IR EMITTER Power Dissipation 100 mw (1) Reverse Voltage Continuous Forward Current 3 V 50 ma DETECTOR TRANSISTOR DARLINGTON Collector-Emitter Voltage 30 V 15 V Emitter Collector Voltage 5 V 5 V Power Dissipation 100 mw (1) 100 mw (1) Collector DC Current 30 ma 30 ma Note: 1. Derate linearly at 0.78 mw/ C above 25 C. CAUTION STRESS DAMAGE Functional operation of the device at or above Absolute Maximum Ratings for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage. ELECTRICAL CHARACTERISTICS (25 C unless otherwise noted) Parameter Symbol Min Typ Max Unit Test Condition IR EMITTER Forward Voltage V F 1.6 V I F Reverse Leakage Current I R 10 µa V R =3 V DETECTOR Collector-Emitter Breakdown Voltage HOA1888-011 HOA1888-013 V (BR)CEO 30 15 V I C =100 µa Emitter-Collector Breakdown Voltage V (BR)ECO 5.0 V I E =100 µa Collector Dark Current HOA1888-011 HOA1888-013 COUPLED CHARACTERISTICS On-State Collector Current HOA1888-011 HOA1888-013 Collector-Emitter Saturation Voltage HOA1888-011 HOA1888-013 Rise And Fall Time HOA1888-011 HOA1888-013 I CEO 100 250 I C(ON) 0.5 2.0 V CE(SAT) 0.4 1.1 t r, t f 15 75 na ma V V CE =10 V I F =0 V CE =5 V I F I F I C =60 µa I C =250 µa µs V CC =5 V, I C =1 ma R L =1000 Ω R L =100 Ω 2 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945
Wide Gap Transmissive Sensor HOA1888 Series SCHEMATIC Figure 1: IRED Forward Bias Characteristics Figure 2: Non-saturated Switching Time vs Load Resistance Forward current - ma 100 90 80 70 60 50 40 30 20 10 Pulsed condition T A = 80 C T A = 25 C 0 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward voltage - V T A = -40 C Response time - µs 1000 100 Photodarlington 10 Phototransistor 1 10 100 1000 10000 Load resistance - Ohms Figure 3: Detector Dark Current vs Temperature Figure 4: Collector Current vs Ambient Temperature Normalized collector current 1.2 1.0 0.8 0.6 0.4 0.2 0.0-50 -25 0 25 50 75 100 Free-air temperature - C For application help: call 1-800-537-6945 Honeywell MICRO SWITCH Sensing and Control 3
Wide Gap Transmissive Sensor HOA1888 Series ORDER GUIDE Catalog Listing HOA1888-011 HOA1888-013 Description Wide Gap Transmissive Sensor, Phototransistor Wide Gap Transmissive Sensor, Photodarlington OUTLINE DIMENSIONS mm (in.) (for reference only) 35 (1.378) RECOMMENDED PCB MOUNTING HOLE DIMENSIONS mm (in.) 11,5 (.453) 12 (.472) 5,5 (.216) 6,9 (.271) 3,8 (.150) OPTICAL C L 2,54 (.100) (2X) (5X) 1,0 (.04) dia. (2X) 2,8 (.110) dia. 13 (.512) 10 (.394) OPTICAL C 0,7 (.027) L 3 (.118) 4,4 (.173) 3,3 (.13) 5X 29 ±.1 (1.142) 3 (.118) 12 (.472) 3,6 (.142) 2,8 (.110) 1,4 (.055) (2x) 4,8 (.189) (2X) 19,4 (.764) 29 (1.142) 2,54 (.100) 3 4 1 2 3,8 ±.1 (.150) LEADS: 1. ANODE 2. CATHODE 3. EMITTER 4. COLLECTOR 19,4 (.764) 2x 7,8 ±.1 (.307) WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com MICRO SWITCH Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 www.honeywell.com/sensing 006455-1-EN IL50 GLO 1298 Printed in USA
Dual Channel Transmissive Sensor HOA1889 Series FEATURES Choice of phototransistor or photodarlington output PCB mount package Polarized locator pins Accurate position sensing 0,5 mm (0.020 in.) aperture windows 1,78 mm (0.070 in.) slot width Available in shipping tubes The HOA1889 Series consists of two infrared emitting diodes facing two NPN silicon phototransistors (HOA1889-011) or two photodarlington transistors (HOA1889-013) encased in a black thermoplastic housing. Detector switching takes place whenever an opaque object passes through the slot between the the emitter and the detector. The dual channels allow both the speed and the direction of the interrupter to be sensed. Emitters and detectors have a 0,5 mm (0.020 in.) vertical aperture. This feature is ideal for use in applications in which high position resolution is desired. The sensor housing is an opaque thermoplastic with aperture openings for use in applications in which maximum rejection of ambient light is important and maximum position resolution is desired. The HOA1889 Series contains plastic molded components. For additional component information see SEP8506, SDP8406, and SDP8106. Housing material is Valox. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. MICRO SWITCH Sensing and Control Valox is a registered trademark of General Electric Company.
Dual Channel Transmissive Sensor HOA1889 Series ABSOLUTE MAXIMUM RATINGS (25 C free-air temperature unless otherwise noted) Operating Temperature Range -40 C to 85 C Storage Temperature Range -40 C to 85 C Soldering Temperature (5 sec) 240 C IR EMITTER Power Dissipation 100 mw (1) Reverse Voltage Continuous Forward Current 3 V 50 ma DETECTOR TRANSISTOR DARLINGTON Collector-Emitter Voltage 30 V 15 V Emitter Collector Voltage 5 V 5 V Power Dissipation 100 mw (1) 100 mw (1) Collector DC Current 30 ma 30 ma Note: 1. Derate linearly at 0.78 mw/ C above 25 C. CAUTION STRESS DAMAGE Functional operation of the device at or above Absolute Maximum Ratings for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage. ELECTRICAL CHARACTERISTICS (25 C unless otherwise noted) Parameter Symbol Min Typ Max Unit Test Condition IR EMITTER (each) Forward Voltage V F 1.6 V I F Reverse Leakage Current I R 10 µa V R =3 V DETECTOR (each) Collector-Emitter Breakdown Voltage HOA1889-011 HOA1889-013 V (BR)CEO 30 15 V I C =100 µa Emitter-Collector Breakdown Voltage V (BR)ECO 5.0 V I E =100 µa Collector Dark Current HOA1889-011 HOA1889-013 COUPLED CHARACTERISTICS On-State Collector Current HOA1889-011 HOA1889-013 Collector-Emitter Saturation Voltage HOA1889-011 HOA1889-013 Rise And Fall Time HOA1889-011, HOA1889-013 I CEO 100 250 I C(ON) 0.5 2.0 V CE(SAT) 0.4 1.1 t r, t f 15 75 na ma V V CE =10 V I F =0 V CE =5 V I F I F I C =40 µa I C =250 µa µs V CC =5 V, I C =1 ma R L =1000 Ω R L =100 Ω 2 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945
Dual Channel Transmissive Sensor HOA1889 Series SCHEMATIC 4 5 3 2 6 7 1 8 Figure 1: IRED Forward Bias Characteristics Figure 2: Non-saturated Switching Time vs Load Resistance Forward current - ma 100 90 80 70 60 50 40 30 20 10 Pulsed condition T A = 80 C T A = 25 C 0 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward voltage - V T A = -40 C Response time - µs 1000 100 Photodarlington 10 Phototransistor 1 10 100 1000 10000 Load resistance - Ohms Figure 3: Detector Dark Current vs Temperature Figure 4: Collector Current vs Ambient Temperature Normalized collector current 1.2 1.0 0.8 0.6 0.4 0.2 0.0-50 -25 0 25 50 75 100 Free-air temperature - C For application help: call 1-800-537-6945 Honeywell MICRO SWITCH Sensing and Control 3
Dual Channel Transmissive Sensor HOA1889 Series ORDER GUIDE Catalog Listing HOA1889-011 HOA1889-013 Description Dual Channel Transmissive Sensor, Phototransistor Dual Channel Transmissive Sensor, Photodarlington OUTLINE DIMENSIONS mm/(in.) (for reference only) 13,39 (.527) 5 6 5,08 (.200) 10,16 (.400) 14,55 (.573) 7 8 2,54 (.100) 1,02 (.040) Leads 1. Anode 1 2. Cathode 1 3. Anode 2 4. Cathode 2 5. Collector 2 7. Collector 1 6. Emitter 2 8. Emitter 1 10,92 (.430) 8,88 (.350) 9,84 (.388) 5,08 (.200).1,27 (.050) 4 3 13,45 (.533) 2 1 2x Ø1,02 (.040) 3,18 (.125) 3,3 (.130) 2.0 3,45 (.136) 7,62 (.300) WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com MICRO SWITCH Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 www.honeywell.com/sensing 006457-1-EN IL50 GLO 1298 Printed in USA
Wide Gap Transmissive Optoschmitt Sensor HOA2006 Series FEATURES Direct TTL interface Buffer logic Visible ambient light and dust protective filter 12 mm (0.47 in.) slot width Snap-in housing The HOA2006 consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator, schmitt trigger, and an NPN output transistor with a 10 K ohm (nominal) pull-up resistor. The buffer logic provides a high output when the optical path is clear, and a low output when the path is blocked. Both emitter and detector have 1,52 mm (0.060 in.) x 1,52 mm (0.060 in.) vertical apertures. The sensor housing contains IR (Infrared) transmissive optical windows. This arrangement provides excellent protection against visible ambient light while eliminating aperture openings which could be clogged by airborne contaminants. Housing material is polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. MICRO SWITCH Sensing and Control
Wide Gap Transmissive Optoschmitt Sensor HOA2006 Series ABSOLUTE MAXIMUM RATINGS (25 C free-air temperature unless otherwise noted) Operating Temperature Range -40 C to 70 C Storage Temperature Range -40 C to 85 C Soldering Temperature (5 sec) 240 C IR EMITTER Power Dissipation 100 mw (1) Reverse Voltage Continuous Forward Current DETECTOR 3 V 50 ma Supply Voltage 12 V (2) Output Sink Current 18 ma Duration of Output Short to V CC or 1.0 sec. Ground Notes: 1. Derate linearly at 0.78 mw/ C above 25 C. 2. Derate linearly from 25 C to 5.5 V at 70 C. CAUTION STRESS DAMAGE Functional operation of the device at or above Absolute Maximum Ratings for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage. ELECTRICAL CHARACTERISTICS (25 C unless otherwise noted) Parameter Symbol Min Typ Max Unit Test Condition IR EMITTER Forward Voltage V F 1.7 V I F Reverse Leakage Current I R 10 µa V R =3 V DETECTOR Operating Supply Voltage V CC 4.5 12 V Low Level Supply Current I CCL 4.0 5.0 12 15 ma V CC =5 V V CC =12 V High Level Supply Current I CCH 2.0 10 ma V CC =5 V 3.0 12 V CC =12 V Low Level Output Voltage V OL 0.4 V I OL =12.8 ma, I F =0 ma High Level Output Voltage V OH 2.4 V I OH =0, I F Hysteresis (1) HYST 10 % Propagation Delay Low-High, High-Low t PLH, t PHL 5 µs V CC =5 V, I F Rise Time t r 60 ns R L =390 Ω, C L =50 pf Fall Time t f 15 ns R L =390 Ω, C L =50 pf COUPLED CHARACTERISTICS IRED Trigger Current I FT 20 ma V CC =5 V Notes: *Add a bypass capacitor, 0.1 µf typical, between V CC and GND near the device in order to stabilize the power supply line. 1. Hysteresis is defined as the difference between the operating and release threshold intensities, expressed as a percentage of the operate threshold intensity. 2 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945
Wide Gap Transmissive Optoschmitt Sensor HOA2006 Series SCHEMATIC RECOMMENDED PCB MOUNTING HOLE DIMENSIONS mm (in.) (2X) 2,54 (.100) (2X) 1,27 (.05) (5X) 0,1 (.04) dia. (2X) 3,2 ± 0.1 (.127) dia. 2 (.079) 4,8 (2x) (.189) (2X) 19,4 (.764) 29 (1.142) OUTLINE DIMENSIONS mm (in.) (for reference only) 35 (1.378) 11,5 (.453) 12 (.472) 5,5 (.216) 6,9 (.271) 3,8 (.150) OPTICAL C L 13 (.512) 10 (.394) OPTICAL C L 0,7 (.027) 4,4 (.173) 3,3 (.13) 5X 3 (.118) 3,6 (.142) 2,8 (.110) 29 ±.1 (1.142) 3 (.118) 12 (.472) 1,4 (.055) 1,27 (.050) 2,54 (.100) 4 5 3 1 2 3,8 ±.1(.150) LEADS: 1. ANODE 2. CATHODE 3. VO 4. GND 5. VCC 2 ±.1(.079) 19,4 (.764) 2x 7,8 ±.1 (.307) For application help: call 1-800-537-6945 Honeywell MICRO SWITCH Sensing and Control 3
Wide Gap Transmissive Optoschmitt Sensor HOA2006 Series ORDER GUIDE Catalog Listing HOA2006-001 Description Wide Gap Transmissive Optoschmitt Sensor WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com MICRO SWITCH Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 006456-1-EN IL50 GLO 1298 Printed in USA www.honeywell.com/sensing
Dual Channel Transmissive Optoschmitt Sensor HOA2007 Series FEATURES Direct TTL interface Two channel operation Buffer logic PCB mount package Polarized locator pins Accurate position sensing 0,5 mm (0.020 in.) aperture windows 1,78 mm (0.070 in.) slot width Available in shipping tubes The HOA2007 Series consists of two infrared emitting diodes facing two Optoschmitt detectors encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator, schmitt trigger and an NPN phototransistor with a 10 kω (nominal) pullup resistor. Detector switching takes place whenever an opaque object passes through the slot between the emitter and the detector. The buffer logic provides a high output when the optical path is clear. The dual channels allow both the speed and the direction of the interrupter to be sensed. Emitters and detectors have a 0,5 mm (0.020 in.) vertical aperture. This feature is ideal for use in applications in which high position resolution is desired. The sensor housing is an opaque thermoplastic with aperture openings for use in applications in which maximum rejection of ambient light is important and maximum position resolution is desired. The HOA2007 series contains plastic molded components. For additional component information see SEP8506 and SDP8601. Housing material is Valox. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. Valox is a registered trademark of General Electric Company. MICRO SWITCH Sensing and Control
Dual Channel Transmissive Optoschmitt Sensor HOA2007 Series ABSOLUTE MAXIMUM RATINGS (25 C free-air temperature unless otherwise noted) Operating Temperature Range -40 C to 70 C Storage Temperature Range -40 C to 85 C Soldering Temperature (5 sec) 240 C IR EMITTER Power Dissipation 100 mw (1) Reverse Voltage Continuous Forward Current DETECTOR 3 V 50 ma Supply Voltage 12 V (2) Output Sink Current 18 ma Duration of Output Short to V CC or 1.0 sec Ground Notes: 1. Derate linearly at 0.78 mw/ C above 25 C. 2. Derate linearly from 25 C to 5.5 V at 70 C. CAUTION STRESS DAMAGE Functional operation of the device at or above Absolute Maximum Ratings for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage. ELECTRICAL CHARACTERISTICS (25 C unless otherwise noted) Parameter Symbol Min Typ Max Unit Test Condition IR EMITTER (each) Forward Voltage V F 1.6 V I F Reverse Leakage Current I R 10 µa V R =3 V DETECTOR (each) Operating Supply Voltage V CC 4.5 12 V Low Level Supply Current I CCL 4.0 5.0 12 15 ma V CC =5 V V CC =12 V High Level Supply Current I CCH 2.0 10 ma V CC =5 V 3.0 12 V CC =12 V Low Level Output Voltage V OL 0.4 V I OL =12.8 ma, I F =0 ma High Level Output Voltage V OH 2.4 V I OH =0, I F Hysteresis (1) HYST 10 % Propagation Delay Low-High, High-Low t PLH, t PHL 5 µs V CC =5 V, I F Rise Time t r 60 ns R L =390 Ω, C L =50 pf Fall Time t f 15 ns R L =390 Ω, C L =50 pf COUPLED CHARACTERISTICS IRED Trigger Current, HOA2007-001 I FT 20 ma V CC =5 V Notes: *Add a bypass capacitor, 0.1 µf typical, between V CC and GND near the device in order to stabilize the power supply line. 1. Hysteresis is defined as the difference between the operating and release threshold intensities, expressed as a percentage of the operate threshold intensity. 2 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945
Dual Channel Transmissive Optoschmitt Sensor HOA2007 Series SCHEMATIC SWITCHING WAVEFORM Figure 1 IRED Forward Bias Characteristics Figure 2 IRED Trigger Current vs Temperature For application help: call 1-800-537-6945 Honeywell MICRO SWITCH Sensing and Control 3
Dual Channel Transmissive Optoschmitt Sensor HOA2007 Series ORDER GUIDE Catalog Listing HOA2007-001 Description Dual Channel Transmissive Optoschmitt Sensor OUTLINE DIMENSIONS mm/(in.) (for reference only) 13,39 (.527) Leads 1. Anode 1 2. Cathode 1 3. Anode 2 4. Cathode 2 5. Vcc 2 6. Vo 2 7. Gnd 2 8. Vcc 1 9. Vo 1 10. Gnd 1 4X 1,27 (.050) 5,08 (.200) 10,16 (.400) 14,55 (.573) 6 9 5 7 8 10 2,54 (.100) 1,02 (.040) 10,92 (.430) 8,88 (.350) 5,08 (.200) 1,27 (.050) 9,84 (.388) 4 3 13,54 (.533) 2 1 1,27 (.050) 2x Ø1,02 (.040) 3,3 130 3,18 (.125) 2.0 3,45 (.136) 7,62 (.300) WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com MICRO SWITCH Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 006458-1-EN IL50 GLO 1298 Printed in USA www.honeywell.com/sensing
Through Beam Modules HOA6299 Series FEATURES Emitter and detector in separate modules for variable spacing Internal current limiting resistor Direct TTL interface Buffer logic Fast response time Dust protective housing APPLICATIONS Edge detection Position control Parts counting Mail sorting The HOA6299 Series through beam infrared sensor modules operate as a pair. The infrared emitting diode, HOA6299-002, and the detector, HOA6299-003, are encased in black thermoplastic housings. Both the emitter and detector modules employ 24 AWG wire leads which are terminated with a Panduit CE156F24-2 connector for the HOA6299-002, and a Panduit CE156F24-3 connector for the HOA6299-003. The detector s NPN output switches whenever an opaque object blocks the beam path. The buffer logic provides a logic high when the optical path is clear, and a logic low when the optical path is blocked. The internal current limiting resistor in the emitter module eliminates the need for an external interface circuit. The HOA6299 series employs an IR transmissive housing which features smooth optical faces without external aperture openings; this feature is desirable when aperture blockage from airborne contaminants is a possibility. The HOA6299 Series through beam modules are tested to ensure operation at minimum separation of (63,5 mm) 2.5 in. This gap can easily be changed for applications with other spacing requirements. Housing material is IR transmissive polysulfone. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. MICRO SWITCH Sensing and Control
Through Beam Modules HOA6299 Series ABSOLUTE MAXIMUM RATINGS (25 C free-air temperature unless otherwise noted) Operating Voltage Emitter Detector Operating Temperature Storage Temperature 2 to 7 V 5 to 12 V 0 C to 50 C (32 F to 122 F) -20 C to 85 C (-4 F to 185 F) CAUTION STRESS DAMAGE Functional operation of the device at or above Absolute Maximum Ratings for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage. ELECTRICAL CHARACTERISTICS (25 C unless otherwise noted) Parameter Symbol Min Typ Max Unit Test Condition Operating Supply Voltage V CC 4.5 12 V T A=25 C Low Level Output Voltage V OL 0.4 V V CC=5 V, I OH=10 ma Light path blocked (Note 1) High Level Output Voltage V OH 4.5 V V CC=5 V, I OH=0 ma Light path not blocked (Note 1) Output Sink Current I OL 10 ma V CC=5 V, V OL=0.4 V Response Time t ON 5 µs V CC=5 V Note: 1. Emitter and detector modules are tested to ensure operation at minimum separation of 63,5 mm (2.5 in) when properly aligned. SCHEMATIC 2 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945
Through Beam Modules HOA6299 Series Figure 1 Emitter Module Drive Current vs Applied Voltage 80 Emitter Module Drive Current - ma 70 60 50 40 30 20 10 0 2.0 3.0 4.0 5.0 6.0 7.0 Applied Voltage - Volts Figure 2 Desired Separation Distance vs Emitter Applied Voltage 12.0 Desired Separation Distance - Inches 10.0 8.0 6.0 4.0 2.0 0.0 2.0 3.0 4.0 5.0 6.0 7.0 Emitter Applied Voltage - Volts For application help: call 1-800-537-6945 Honeywell MICRO SWITCH Sensing and Control 3
Through Beam Modules HOA6299 Series ORDER GUIDE Catalog Listing HOA6299-002 HOA6299-003 Description Through beam, IR emitting diode Through beam, IR detector module OUTLINE DIMENSIONS (mm/in) HOA6299-002 3,68 (0.145) THE EMITTING AREA FALLS WITHIN A 5,59 (0.22) DIAMETER ON THIS CENTER LINE 12,70 (0.500) 3,18 (0.125) DIA. THRU HOLE Tolerance: 3 plc decimals ± 0.25 3 (0.010) 2 plc decimals ± 0.51 3 (0.020) PANDUIT, CE156F24-2 3,81 (0.150) 12,70 (0.500) 12,70 (0.500) HOA6299-003 3,68 (0.145) 3,81 (0.150) THE SENSING AREA FALLS WITHIN A 5,59 (0.22) DIAMETER ON THIS CENTER LINE 3,81 (0.150) 3,81 (0.150) 12,70 (0.500) 12,70 (0.500) 3,18 (0.125) DIA. THRU HOLE 304,8 (12.0 +0.5) PIN 1 CATHODE ANODE PANDUIT, CE156F24-3 12,70 (0.500) 3,81 (0.150) 3,81 (0.150) 381 (15.0 +0.5) PIN 1 GND OUT VCC WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com MICRO SWITCH Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 006460-1-EN IL50 GLO 699 Printed in USA www.honeywell.com/sensing