INUI-LEDSDL10 Specification
Mode No.: INUI- LED-SDL-10-xx-xx Input Votage (input AC or DC) Wattage SMD LED chip (Watt) xxx Light mode: LED Down Light Company Brand INUI Features: 1. Product Name:LED Down Light 10-watt 2. Adopt the Epistar 3528 Muti-Chip LED Lighting Source, encapsuation by ourseves, Long ifespan, Energy saving, Environment friendy, High efficiency, No strobe, No ghosting, No UV, IR. 3. INUI series LED Down Light integrate SMD LED ighting source into the rear Chip pate 4. The Lighting source of the LED Down Light is using super bright Epistar 3528 LED chip, It s singe LED chip wi give up to 85m/W 5. Using high efficiency therma conductivity siicon, it s assured the heat sink of the ight, the temperature of the junction wi not exceed 65 C, which is effective for controing the ight degradation, the ifespan for the LED ight is over 50000 hours. 6. The range for the input votage is wide. Which make the LED Down Light a universa product and perfecty suited to repace oder 50-watt Haogen down ights. Unique protection circuit and exact constant current system assure the abiities such as anti-interference and stabiity of the ight. 7. Our LED Drivers are approved CE CB EMC GS TUV UL and have fu certification. Appication: LED Pane Light is avaiabe for Office Lighting, corridors, Schoos, Shops, Toiets, Domestic environment s.
Parameters: Input Votage:AC85-265V 47-63Hz UL driver LED QTY:1*20pcs Epistar 3528 SMD Tota Power:10 ±1W Diver Efficiency:>85% Power Factor(PF):>0.90 LED Efficiency:>83 m/w Initia LED Lumen: >860 m Lamp Lumen: >840 m LED COB Work Votage: 30-34V Reated coour temperature(cct):coo White: 6000K,Pure White:4000KK,Warm White:3000K Coour Rendering Index (CRI): CW/PW/WW: Ra 80 Uniformity of uminance: 0.7 Distribution of the ight:led+ Optica Refector The curve of ight distribution:ova Working Temperature:-40 ºC ~ 50 ºC Working Humidity:-10 ~ 90%RH Storage Temperature:-25 ºC ~65 ºC Materia for ight :Auminium Case Coour Avaiabe: Brushed Siver, White Lifespan for LED ighting source:> 50,000 hours 5 years warranty IP Rating: IP54 Net weight: 0.25Kgs Gross Weight: 0.3Kgs
Ø=90mm (cut out size 78mm) Ht 33mm
1. When opening the package, pease check the product over, accessory, abe, and certificate of quaity. Pease assure that the ight is damage free. 2. The wires of LED Down Light are Three-core, the standard size of the wire is 3x1.00mm² and the outer diameter isφ8~10mm, brown wire is ive ine, bue wire is neutra ine, yeow& green is earth ine. 3. LED Down Light wi work when the votage up to rated votage, so pease be sure the votage is within the required range, or it wi damage the ight, which can t be repaired. 4. The way of connect wire: Attention 1. In order to make sure the ight can work safety and stabiity, the earth wire must be connected to earth uness the driver is a doube insuated type with no earth connection. 2. When connecting the wires pease turn off the power, and check whether the wires are connected correcty. Never connect the wires in opposite way. Guarantee for the quaity and saes service: INUI series LED Down Light is a new stye green energy saving ed ighting; we offer a 5-year warranty as an optiona extra using a Meanwe driver. Any question, pease fee free to contact our saes service department, we wi ask our professiona engineers to hep you sove your question. INUI wi not offer any guarantee in the foowing situation: u The damage due to incorrect instaation and operation or using the ight not in the reguated working ambient. u The damage due to abusing or misusing, or without adequate protection during instaation. u The damage due to customers opening the amp without pre-authorisation. u The Damage due to persona or nature disaster and other things that can t be predicted. u The repacement of non-issued parts such as LED Chips or drivers u Any modification to the Down ight without first consuting INUI for confirmation that such modification wi compromise the 3 & 5-year warranty.