> Light weight glass reinforced polyester (GRP) Ex d enclosure > Weather resistant high performance red paint finish as standard > Break glass version supplied with test key > Push button version supplied with reset key and protection flap > Optional extras include stainless steel lift flap, duty and tag labels www.stahl.de Yodalex range Manual call points designed for use in hazardous or harsh environments ATEX / IECEx / GOST Zone 0 0 For use in x x x x 9E00 Explosion Protection Global (IECEx) Gas explosion protection Ex d IIC T (Ta -ºC to +0ºC) Gb ust explosion protection Ex tb IIIC T8ºC b IP A Europe (ATEX) Ex d IIC T (Ta -ºC to +0ºC) Gb Gas explosion protection E II G Ex d IIC T (Ta -ºC to +0ºC) Gb ust explosion protection E II Ex tb IIIC T8ºC b IP A Certificates and approvals IECEx IECEx BAS 08.0089 Europe (ATEX) Baseefa08ATEX09X Certificates IECEx, ATEX, Brazil (METRO), Russia (GOST-R) WebCode MCPA Control evices /
Versions Break Glass (BG) E00 Push Button (PB) 00E00 Selection Table Version Version Enclosure colour Order number Art. no. Weight kg Break Glass (BG) red normal (R) MCP/BG/SP/Ex/A+B+C+/EU/R 0.000 Manual Call Points, ATEX certification, Push Button (PB) red normal (R) MCP/PB/SP/Ex/A+B+C+/EU/R 0.000 Break Glass (BG) red normal (R) MCP/BG/SP/EX/A+B+C+//R 00.000 Manual Call Points, IECEx certification, Push Button (PB) red normal (R) MCP/PB/SP/Ex/A+B+C+//R 0.000 Break Glass (BG) red normal (R) MCP/BG/SP/EX/A+B+C+/RU/R 0.000 Manual Call Points, GOST R certification, Push Button (PB) red normal (R) MCP/PB/SP/Ex/A+B+C+/RU/R 00.000 Note Accessories, variations and different unit colours are available, to order these please use the table below position of cable entries A B A B Contacts LE Resistors Enclosure colours C 9E00 Break glass call point Push button call point cable entries, supplied with (x) stopping plugs and (x) dust cap standard: change-over contact optional: change-over contacts optional: LE-status indication (up to V C) various resistance values on request additional colours on request C 9E00 / Control evices
Type Code Variations MCP / _ / _ / _ / _ / _ / _ / _ / _ / _ / _ Version break glass BG push button PB Contacts change over SP Explosion protection change over P standard standard x M0 with x stopping plugs and x dust cap glands to be ordered separately Certification ATEX EU IECEx GOST R Colour red R blue green yellow Ex A+B+C+ RU B G Y Accessories lift flap (break glass only) LF end of line resistor inline resistor EOL IL end of line and Inline resistor ILEOL Labels (please specify wording) LE signal duty label tag label LE T Control evices /
Technical ata Electrical data Rated operational voltage Switching capacity Contact element Schematic... 0 V C,... 0 V AC C... 0 V A resitive or A inductive 0... 0 V A resitive or inductive AC... 0 V A resistive or inductive standard: change-over contact optional: change-over contacts Normally open with series monitoring Internal switch connections armed 9 End of line device 8E00 89E00 The call point is supplied in two versions: supplied with or without a monitoring resistor. The version with the monitoring resistor should be connected as shown above. Check panel instructions to ensure the correct value resistor is fitted. If not required, remove and connect as shown in 'A' or 'B' Ratings: Vac: 0 V max. / V min. Imax: A resistive. Vdc: 0 V max. / V min. Contact resistance: 0 millioms max. Conductor size:. sq.mm max. per terminal. Normally open Normally closed End of 9 line device Monitoring device A B 8E00 80E00 When supplied without the monitoring resistor the call point should be connected as shown in 'A' or 'B' above. Legend 9 = Optional end of line resistor Ambient conditions Ambient temperature -... + 0 C Max. relative humidity 9 % at 0 C Mechanical data Enclosure material glass fibre reinforced polyester (GRP) Colour red egree of protection IP cable entries, supplied with (x) stopping plugs and (x) dust cap Connection Terminals way terminal block., mm Earth connection provided as standard Assembly / Installation Assembly via holes through the back box / Control evices
Accessories and Spare Parts esignation Illustration escription Group Order number Art. no. WebCode Cable gland Compound Barrier IIB + H and IIC 8/-0-PXSSK-M0 8888 8J Cable Glands Ex d and Ex e for all Types of Unarmoured Cables Note 0E00 Compound Barrier Cable Glands Ex d and Ex e for all Types IIB + H and IIC 8/-0-PXK-M0 88 8I E00 of Armoured Cables Approvals of cable entries have to be observed. imensional rawings (All imensions in mm / inches) - Subject to Alterations mm /.9, mm /. ", mm /. ", mm /. " mm /.9 ", mm /. " 98 mm /.9 " Break glass call point 0E00 Push button call point We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding. 0E00 Control evices /