Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp Part #: HALS-48-4L-LED Made in Texas The Larson Electronics HAL-48-4L-LED Hazardous Area LED Light Fixture is ETL listed Class 1 Division 2 Groups A, B, C and D, UL 1598A listed, has a T4A temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HAL-48-4L-LED light fixture is a 4 foot long, 4 lamp, ETL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent style LED light and a good choice for use in hazardous areas requiring maximum illumination. This fixture is T4A temperature rated, comes standard with four 28 watt LED bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL -48-4L-LED provides operators in hazardous locations with a powerful, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T5-bulbs. The 28 watt LED lamps produce more illumination than standard T5 bulbs, but draw only 1/3rd of the current. The current generation of Larson Electronics LED T-series style bulbs produce 15% more light than our HALS-48-4L-LED fixture outfitted with two T5 bulbs. This fixture is multivoltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our HAL-48-4L-LED LED light fixture is both ETL approved. This unit comes with the following color options: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K and 2700K. Page: 1
Standard Surface Mount Brackets: Each surface mounting bracket is attached on each end of the light and allows the operator to adjust the angle of the entire fixture. Pendant and cable mounting options are also available for operators who wish to mount these fixtures away from the ceiling surface. Each is illustrated above beginning left to right; Cable, Adjustable Surface Mount and Pendant. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants. Made in USA Quality 1. Each unit dialectically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices. 3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy. 4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion. 6. 1/2 inch, threaded access hole for wiring conduit. 7. Units can be wired end to end in series. Specifications / Additional Information HAL-48-4L-LED Hazardous Area UL Listing: United States - Canada Dimensions: W-15" L-49 3/4 " H-6 1/8 " Weight: 33 lbs. Total Watts: 112 watts (28 Watts per Lamp) Voltage: Universal 120/277VAC 50/60Hz Total Lumens: 14,000 (3,500 per Lamp) ETL Listed Class 1 Division 2, Groups A, B, C, D Class 2 Division 2, Groups F,G UL 595 Outdoor Marine Type (Saltwater) UL 1598A Marine Type California Title 24 Compliant Made in the USA Lamp Life Expectancy: 50,000 Hours Luminous Efficacy: 125 Lumens per Watt Operating Temp Range: T4A Rated -30 C to 85 C Beam Angle: N/A Special Orders- Requirements Contact us for special requirements Color Temp: 5600K,5000K,4500K,4000K,3500K,3000K,2700K Toll Free: 1-800-369-6671 Mounting: Bracket Standard - Pendant/Cable Mount Optional Fax: 1-903-498-3364 Wiring Hub: 1/2 inch threaded E-mail: sales@larsonelectronics.com Scroll Down to Purchase- This product does not qualify for free shipping. Part #: HALS-48-4L-LED (48686) Page: 2
Options: HALS-48-4L-LED- VOLTAGE - MOUNT Example: HALS-48-4L-LED-1227-SFC VOLTAGE 120-277V AC -1227 11-25V AC/DC -1224 MOUNT Surface -SFC Pendant -PND Cable -CAB Page: 3
Page: 4
Page: 5
Page: 6
Page: 7
Links (Click on the below items to view): - SpecSheet French - SpecSheet Arabic - Manual - SpectrumChart Page: 8