A n I S O 9 0 0 : 2 0 0 0 O r g a n i z a t i o n Refrigeration Technologies Suction Line Accumulators With or without heat exchanger R4a R404A R07A R407C R22 R40A R08b R77 CO 2 Approved by European standards ENVIRONMENT FRIENDLY LESS ELECTRICITY CONSUMPTION WORLD CLASS TECHNOLOGY www.amoking.com www.seabird.in email:info@amoking.com
THE SEA BIRD GROUP The SEABIRD Group is today diversified into different industries, also at the forefront of Asian Compressors production. Since 98 SEABIRD has enjoyed continuous growth, and has invested heavily in highly advanced computerised production machinery, to ensure that quality and reliability of our products remain the foundation of our success. SEABIRD has production facilities in different parts of India and four service centres abroad, from where we service customers around the globe. SEABIRD is now market leader in the segment of high quality Compressors, Condensing Units, Pressure Vessels, Chillers and Cold Rooms which has always been the core business of the company's activities. SEABIRD is also ventured into Plastic industry, Automobile industry, Automation industry and software industry. Continuing investments for research and development into new products, together with the design of ultramodern plant, options and design. This is a success that has been consolidated over the years by the work of a flexible, dynamic and enthusiastic organization, in which the company culture is very much oriented towards quality, customer care and efficiency. A n I S O 4 0 0 : 2 0 0 4 O r g a n i z a t i o n A n I S O 9 0 0 : 2 0 0 0 O r g a n i z a t i o n Approved by European standards 2 Prestigious National Award Winner
SUCTION ACCUMULATORS APPLICATIONS Suction line accumulators are installed on refrigeration systems to prevent refrigerant liquid return to suction line to idled compressors. These systems include the following: systems with high temperature differences ( discontinuous operation), remote systems with long lines, systems with low evaporator load, reversing cycle systems: heat pump and defrost applications. Recommended for low superheat applications such as liquid chillers, low temperatures display cases, truck units, and so on Liquid+Gas Gas CHARACTERISTICS Complete separation of the vapour phase and the refrigerant fluid's liquid phase. Complete vaporization of the refrigerant liquid when the liquid leaves the Accumulators. Cooling of the vapour returning to compressor, thus reducing motor warm up. Pressure equalization at the Accumulators inlet and outlet, even in off cycle periods. Minimum pressure drop. Reduced noise on the low pressure side of the system. Positive oil return. Maximum efficiency of the relief device (expansion valve) because it is supplied with subcooled liquid. Enhanced evaporator performance. RECOMMENDATIONS For optimum operation, the velocity at which the refrigerant liquid passes through the tube baffles of the accumulator should be between 8 and 2 m/s. If the velocity of the gas in the piping is insufficient, oil return to the compressor is not assured. The selected liquid holding capacity should not be less than 0% of the total charge of refrigerant liquid in the installation. 0 The pressure drop in the accumulators should not go beyond 0. C. The suction line accumulators must be installed in a vertical position, as close to the compressor as possible and at the same level as compressor. Mounting always has to be done vertically, as close as possible to the compressor and at the same height. In order to avoid any frost on suction accumulators, Seabird strongly recommends to systematically insulate Suction Accumulators.
MODEL FITTING LIQUID TONS OF REFRIGERATION (EVAPORATOR TEMPERATURE)** SIZE HOLDING (D NOM.) CAPACITY Lbs SB28 /2" 0.6 0.8.2 0.8.0. 0.9.4 0.8. SB80 /8" 2. 0.8.2.7.2.6.4 2..0.2.9 2.7 SB82 /8".0 0.8.2.7.2.6.4 2..0.2.9 2.7 SB42 /4".0.0.6 2.. 2.6 2.8 4.0.6 2.. SB84 /8". 0.8.2.7.2.6.4 2..0.2.9 2.7 SB44 /4"..0.6 2.. 2.6 2.8 4.0.6 2.. SB26 /2" 2. 0.6 0.8.2 0.8.6. 0.9.4 0.8. SB8 /8" 2. 0.8.2.7.2.6.4 2..0.2.9 2.7 SB80 a /8".0 0.8.2.7.2.6.4 2..0.2.9 2.7 SB40 a /4".0.0.6 2.. 2.6 2.8 4.0.6 2.. SB49 /4" 6.0.0.6 2.. 2.6 2.8 4.0.6 2.. SB7 7/8" 6.0.0 2.8 4.0 2.7.6 4.6.. 7. 2.8 4. 6.2 SB42 a /4" 9.0.0.6 2.. 2.6 2.8 4.0.6 2.. SB782 7/8" 9.0 2.8 4.0 2.7.6 4.6.. 7. 2.8 4. 6.2 SB78 7/8" 0.0 2.8 4.0 2.7.6 4.6.. 7. 2.8 4. 6.2 SB8 /8" 0.0..0 7.2 4.4.9 7.6. 8. 4.6 7. 0.2 SB87 /8"..0 7.2 4.4.9 7.6. 8. 4.6 7. 0.2 SB87 /8" 4.6 7. 7.2 9.6 8..2 8.8 7.4.6 6. SB78 7/8" 2.8 4.0 2.7.6 4.6.. 7. 2.8 4. 6.2 SB78 a 7/8".0 2.8 4.0 2.7.6 4.6.. 7. 2.8 4. 6.2 SB8 a /8".0..0 7.2 4.4.9 7.6. 8. 4.6 7. 0.2 SB84 /8" 4.0 4.6 7. 7.2 9.6 8..2 8.8 7.4.6.6 SB87 /8" 7.0 7..7 7.0 4.2 8.2 2.8 20.0 28..0 7.2 24. SB820 /8" 20.0 7..7 7.0 4.2 8.2 2.8 20.0 28..0 7.2 24. SB82 /8" 7..7 7.0 4.2 8.2 2.8 20.0 28..0 7.2 24. Dimensional Drawing on request. R4a R404A/R07 R22 R02 8 C 7 C C 8 C 7 C C 8 C 7 C C 8 C 7 C C C (0 F) (+20 F) (+40 F) (0 F) (+20 F) (+40 F) (0 F) (+20 F) (+40 F) (0 F) (+20 F) (40 F) 4
Type MM SBR Inlet/ Outlet Connections in ODF Inches R2 Capacity in KG of refrigerant at 0 C R22 R407C Dimensions in mm R02 R4a R404A NH A B C E Total volume in litres Possible retention Volume in litres Drawing SB 04 2 ½ 0.8 94 0 0.9 0.4 SB 4 2 ½...2.2.2 294 0. 0.4 SB 24 2 ½.7 02 8 6 0. SB 0 6 /8 0.8 99 48 0.9 0. SB 6 /8...2.2.2 299 48. 0. SB 2 6 /8.7 02 6 6 SB 6 8 /4...2.2.2 299 7. SB 26 8 /4.7 02 6 6 0.9 SB 27 22 7/8.7 02 7 6 0.20 SB 47 22 7/8 2.8 2. 2.6 2.6 2.6 02 487 6.2 0.20 SB 67 22 7/8. 4.8 2. 2 40.8 0.2 SB 49 28 /8..2..2.2.6 2 42 49 4.0 0.28 SB 69 28 /8. 4.8 2. 2 4.8 0. SB 28 /8 7.2 6.. 2 7.4 0. SB 6 /8. 4.8 2. 2 42.8 SB 8 /8 7.2 6.. 2 4 7.4 SB 0 /8 9. 8.6 8.8 4.4 2 662 9.2 SB 8 42 /8 7.2 6.. 2 4 7.4 SB 0 42 /8 9. 8.6 8.8 4.4 2 662 9.2 SB 20 42 /8 20. 8. 9.0 9.0 9.0 9. 29 722 4 90 20 0.0 SB 7 4 2 /8. 4.0 4. 4. 4. 7.0 29 82 4 90 0.60 SB 87 4 2 /8 20. 8. 9.0 9.0 9.0 9. 29 72 4 90 20 0.60 SB 67 4 2 /8 6.0.0... 6. 24 700 SB 07 4 2 /8. 47.0 47. 47. 47. 24.0 24 900 0 SB 62 67 2 /8 6.0.0... 6. 24 700 2.60 SB 02 67 2 /8. 47.0 47. 47. 47. 24.0 24 900 0 2.60 SB 62 80 /8 6.0.0... 6. 24 700 2.90 SB 02 80 /8. 47.0 47. 47. 47. 24.0 24 900 0 2.90 SB 702 80 /8 72. 6.. 24 0 70 2.90 SB 7029 88.9 /8 72. 6.. 24 0 70.20 Max. Working Pressure 20 Bar ( P.S.I.)
Dimensional Drawing 2 4 6 282, Patparganj Industrial Estate, Patparganj, Delhi 0092 (INDIA) Tel: +92248267, 22684 Fax: +9224668 USA Address: 6 BENTLEY PL. BUFFALO GROVE, IL 600 USA Ph. 24864 www.amoking.com www.seabird.in email:info@amoking.com Printed on 00% recyclable paper. Printed with environment friendly ink.