Multi-Pex PULL-ON PEX PLUMBING SYSTEM 25 WARRA NTY YEARS May 2010 75 McCanns Pull-On PEX DL brochure.indd 1 7/5/10 3:09:24 PM
THIS BROCHURE PROVIDES SPECIFICATIOn AnD InSTALLATIOn InFORMATIOn On THE MULTI-PEX PULL-On PEX PLUMBIng SYSTEM. The MULTI-PEX Pull-On PEX Plumbing System comprises three main components; a flexible cross linked high density polyethylene pipe, solid DR brass compression fittings and special tooling. Both the pipe and fittings are manufactured by Elson. All products are manufactured to strict quality controls, are fully compliant to Australian Standards and are fully warranted. The MULTI-PEX Pull-On PEX Plumbing System uses black coloured PE-X pipe, which is suitable for use in hot and cold water services in both domestic and commercial applications. In addition the same pipe can be used for rainwater harvesting (coloured green) and water recycling (coloured purple). The MULTI-PEX Pull-On PEX Plumbing System is a cost effective alternative to other plumbing systems. The MULTI- PEX Pull-On PEX system is easy and fast to install, usually with less fittings. The flexible pipe is light, as well as being corrosion, scale and chlorine resistant. As water flows more quietly through the PE-X pipe, water hammer is greatly reduced. With the MULTI-PEX Pull-On PEX system, the jointing sleeve is slipped over the pipe after which the end of the pipe is flared. The brass fitting is inserted into the flared end of the pipe and the jointing sleeve is then pulled over the pipe using the special pull on tool. This results in a permanent leak proof joint. By using the MULTI-PEX Pull-On expanding and compression tool, joints can be made without flame, heat, solder or solvents. 75 McCanns Pull-On PEX DL brochure.indd 2 7/5/10 3:01:55 PM
Contents Technical Information... 4 Installation Guide... 10 Product List... 12 Fittings... 12 Pipe & Clips... 18 Tools... 21 3 75 McCanns Pull-On PEX DL brochure.indd 3 7/5/10 3:02:00 PM
Technical Information Technical Information The MULTI-PEX Pull-on product range is a complete PEX Plumbing System comprising of PE-X pipe and a full range of DR brass fittings. The system also comes with a set of easy to use tooling. 1. Piping PE-X piping is manufactured from high density crossed linked polyethylene material. To conform to Australian Standard AS/NZS 2492, the base material used in the manufacture of PE-X pipe, can be cross linked by using one of three methods; by the peroxide (PE-Xa), Silane (PE-Xb) or electron beam (PE-Xc) cross linking process. The piping is available in three colours. The colours help to identify the pipe application. However it is recommended that unprotected pipe not be exposed to direct sunlight on a permanent basis. 4 75 McCanns Pull-On PEX DL brochure.indd 4 7/5/10 3:02:00 PM
Black Purple Green Packaging Pipe size 16mm 20mm 25mm 32mm Suitable for potable hot & cold water plumbing in domestic and commercial applications. Suitable for recycled, non potable water Suitable for rainwater Black 5m lengths, 50 & 100m coils 5m lengths, 50 & 100m coils 5m lengths, 25 & 50m coils 5m lengths, 25 & 50m coils Technical Information Pipe size Purple Green 16mm 20mm 25mm 5m lengths 50m coils 5m lengths, 50m coils 5m lengths, 50m coils 5m lengths, 50m coils 5m lengths, 50m coils Pipe size 16mm 20mm 25mm Black in Conduit 50m coils 50m coils 50m coils 5 75 McCanns Pull-On PEX DL brochure.indd 5 7/5/10 3:02:00 PM
Technical Information Pipe sizes and tolerances Nom. O.D Mean outside diameter (mm) Wall thickness (mm) Min Max Min Max DN 16-16mm 16.0 16.3 2.2 2.6 DN 20-20mm 20.0 20.3 2.8 3.2 DN 25-25mm 25.0 25.3 3.5 4.0 DN 32-32mm 32.0 32.3 4.4 5.0 Pressure ratings Pipes for water applications are classified in terms of the nominal pressure rating (PN) at water service temperature of 20 C. MULTI-PEX PE-X pipe has a pressure rating of PN20 and a nominal working pressure of 2,000kpa at 20 C. The following table shows the relationship of the pipe working pressure and pipe material temperature (PMT). Working pressure, KPa PMT 20 C 60 C 70 C PN 20 2000 1500 1330 Temperature ratings PE-X pipe is suitable for use at temperatures up to 100 C however; continuous long term operation should be between -50 C and +70 C. 6 75 McCanns Pull-On PEX DL brochure.indd 6 7/5/10 3:02:00 PM
2. Fittings MULTI-PEX Pull-On PEX fittings are especially designed and engineered to compliment the MULTI- PEX PE-X Pipe. All MULTI-PEX fittings are made from solid DR brass (i.e Dezincification Resistant quality in accordance with AS 2345) and require no heat, flame or solvents when jointing to PE-X pipe. Available sizes Nom. O.D DN 16-16mm DN 20-20mm DN 25-25mm DN 32-32mm Technical Information Refer to a full product listing later in this brochure. 7 75 McCanns Pull-On PEX DL brochure.indd 7 7/5/10 3:02:07 PM
Technical Information 3. MULTi-PEX PULL-On TOOLs MULTI-PEX Pull-On tools are specifi cally designed to be used with MULTI-PEX PE-X pipe to ensure a simple effective joint. The tools are made from the highest quality materials and are designed to give years of trouble free service. Important:- Tools should be adequately maintained to achieve optimum results. 4.WARRAnTY The MULTI-PEX Pull-On PEX Plumbing System carries a 25 year warranty when the system is installed by a licenced plumber in accordance with AS 3500 of the National Plumbing code parts 1, 4 and 5 and established installation practices. 5.COMPLiAnCE WiTH AUsTRALiAn standards MULTI-PEX Pull-On PEX Plumbing System is licenced by SAI Global to Australian Standards and complies with Australia and New Zealand Standards AS/NZS 2492 for pipe (Lic. No. 21136) and AS 2537 for fi ttings (Lic. No. 21276). 8 75 McCanns Pull-On PEX DL brochure.indd 8 7/5/10 3:02:08 PM
Technical Information 25 WARRA NTY YEARS 9 75 McCanns Pull-On PEX DL brochure.indd 9 7/5/10 3:02:08 PM
Installation guide Installation Guide 1 Cut the pipe to be joined cleanly and squarely using MULTI-PEX PE-X Pipe Cutters. 2 Slip the jointing sleeve over the end of the pipe with the beveled end of the sleeve facing outwards and the grooved end of the sleeve at the furthest point from the end of pipe. 3 Expand the pipe using the MULTI-PEX Expanding Tool making sure the jointing sleeve is well away from the area of pipe to be expanded. Expand the pipe twice to make a good expansion of the pipe end. 4 Insert the fi tting into the expanded end of the pipe until the fi tting reaches the pipe stop. 10 75 McCanns Pull-On PEX DL brochure.indd 10 7/5/10 3:02:16 PM
5 6 Slide the jointing sleeve towards the fi tting. Position the jointing sleeve and the fi tting squarely within the jaws of the MULTI-PEX Compression Tool. Draw the sleeve towards the fi tting by closing the jaws of the Compression Tool until the sleeve reaches the shoulder of the fi tting. Installation guide 7 Inspect the joint to ensure the sleeves are drawn all the way to the fi tting shoulder and the beveled end of the sleeves is towards the fi tting. 8 Pressure test the line as per Plumbing Regulations. 4 11 75 McCanns Pull-On PEX DL brochure.indd 11 7/5/10 3:02:20 PM
Fittings Product Listing NO.1 STRAIGHT COUPLING 23000 No.1 Straight Coupling 16mm 23002 No.1 Straight Coupling 20mm 23004 No.1 Straight Coupling 25mm 23006 No.1 Straight Coupling 32mm NO.1R REDUCING COUPLING 23020 No.1R Reducing Coupling 20 x 16mm 23022 No.1R Reducing Coupling 25 x 16mm 23024 No.1R Reducing Coupling 25 x 20mm 23026 No.1R Reducing Coupling 32 x 25mm NO.2 STRAIGHT FEMALE CONNECTOR 23060 No.2 Straight Connector 16mm x 15mm FI 23062 No.2 Straight Connector 20mm x 15mm FI 23064 No.2 Straight Connector 20mm x 20mm FI 12 75 McCanns Pull-On PEX DL brochure.indd 12 7/5/10 3:02:20 PM
NO.3 STRAIGHT MALE CONNECTOR 23040 No.3 Straight Connector 16mm x 15mm MI 23058 No.3 Straight Connector 16mm x 20mm MI 23042 No.3 Straight Connector 20mm x 15mm MI 23044 No.3 Straight Connector 20mm x 20mm MI 23048 No.3 Straight Connector 20mm x 25mm MI 23052 No.3 Straight Connector 25mm x 15mm MI 23046 No.3 Straight Connector 25mm x 20mm MI 23050 No.3 Straight Connector 25mm x 25mm MI 23054 No.3 Straight Connector 32mm x 20mm MI 23056 No.3 Straight Connector 32mm x 25mm MI Fittings NO.12 ELBOW 23080 No.12 Elbow 16mm 23082 No.12 Elbow 20mm 23084 No.12 Elbow 25mm 23086 No.12 Elbow 32mm NO.13 MALE ELBOW 23400 No.13 Elbow 16mm x 15mm MI 23402 No.13 Elbow 20mm x 15mm MI 23404 No.13 Elbow 20mm x 20mm MI 23406 No.13 Elbow 25mm x 20mm MI 13 75 McCanns Pull-On PEX DL brochure.indd 13 7/5/10 3:02:21 PM
Fittings NO.14 FEMALE ELBOW 23420 No.14 Elbow 16mm x 15mm FI 23422 No.14 Elbow 20mm x 15mm FI 23424 No.14 Elbow 20mm x 20mm FI NO.15 LUGGED FEMALE ELBOW 23120 No.15BP Elbow 16mm x 15mm FI 23122 No.15BP Elbow 20mm x 20mm FI NO.19 LUGGED MALE ELBOW 23140 No.19BP Elbow 16mm x 15mm MI 65mm Long 23142 No.19BP Elbow 16mm x 15mm MI 90mm Long 23144 No.19BP Elbow 16mm x 15mm MI 200mm Long 23146 No.19BP Elbow 16mm x 15mm MI 150mm Long 23148 No.19BP Elbow 20mm x 15mm MI 95mm Long 23152 No.19BP Elbow 20mm x 15mm MI 200mm Long 23154 No.19BP Elbow 20mm x 20mm MI 95mm Long 23156 No.19BP Elbow 20mm x 20mm MI 150mm Long 14 75 McCanns Pull-On PEX DL brochure.indd 14 7/5/10 3:02:22 PM
NO.24 TEE 23160 No.24 Tee 16mm 23162 No.24 Tee 20mm 23164 No.24 Tee 25mm 23166 No.24 Tee 32mm Fittings NO.25 REDUCED CENTRE TEE 23180 No.25 Tee Reduced Centre 20 x 20 x 16mm 23182 No.25 Tee Reduced Centre 25 x 25 x 20mm 23188 No.25 Tee Reduced Centre 25 x 25 x 16mm 23190 No.25 Tee Reduced Centre 32 x 32 x 25mm NO.26 REDUCED END TEE 23186 No.26 Tee Reduced End 20 x 16 x 20mm 23192 No.26 Tee Reduced End 25 x 16 x 25mm 23194 No.26 Tee Reduced End 25 x 20 x 25mm NO.27 REDUCED CENTRE & END TEE 23184 No.27 Tee Reduced Centre+End 20 x 16 x 16mm 23196 No.27 Tee Reduced Centre+End 25 x 16 x 16mm 23380 No.27 Tee Unequal Red Centre+End 25 x 20 x 16mm 23382 No.27 Tee Unequal Red Centre+End 25 x 16 x 20mm 23384 No.27 Tee Reduced Centre+End 25 x 20 x 20mm 23386 No.27 Tee Reduced Centre+End 32 x 25 x 25mm 15 75 McCanns Pull-On PEX DL brochure.indd 15 7/5/10 3:02:23 PM
Fittings NO.61 STOPPER 23260 No.61 Stopper 16mm 23262 No.61 Stopper 20mm NO.62 STRAIGHT TAP CONNECTOR 23240 No.62 Straight Tap Connector CONE 16mm x 15mm FI NUT 23242 No.62 Straight Tap Connector CONE 20mm x 20mm FI NUT 23360 No.62 Straight Tap Connector FLAT 16mm x 15mm FI NUT 23362 No.62 Straight Tap Connector FLAT 20mm x 20mm FI NUT NO.63 BENT TAP CONNECTOR FLARED COMPRESSION UNION 23340 No.63 Bent Tap Connector 16mm x 15mm FI NUT 23342 No.63 Bent Tap Connector 20mm x 20mm FI NUT BATH/LAUNDRY ASSEMBLY 23220 Flared Copper Compression Union 16mm x 15mm FL 23221 Flared Copper Compression Union 20mm x 15mm FL 23222 Flared Copper Compression Union 20mm x 20mm FL 16 23280 Bath/Laundry Assembly Right Angled 200mm (FLOOR ENTRY) 23282 Bath/Laundry Assembly Right Angled 300mm (FLOOR ENTRY) 23286 Bath/Laundry Assembly Straight 300mm (SIDE ENTRY) 75 McCanns Pull-On PEX DL brochure.indd 16 7/5/10 3:02:24 PM
SHOWER ASSEMBLY 23300 Shower Assembly Right Angled 150mm (FLOOR ENTRY) 23302 Shower Assembly Right Angled 200mm (FLOOR ENTRY) 23304 Shower Assembly Right Angled BARBS UP 150mm (TOP ENTRY) 23306 Shower Assembly Right Angled BARBS UP 200mm (TOP ENTRY) 23320 Shower Assembly Straight 150mm (SIDE ENTRY) Fittings CONNECTING BARB 23440 Connecting Barb 16mm 23442 Connecting Barb 20mm 23444 Connecting Barb 25mm 23446 Connecting Barb 32mm CONNECTING BARB FEMALE 23450 Connecting Barb Female 16mm 23452 Connecting Barb Female 20mm 23454 Connecting Barb Female 25mm COMPRESSION SLEEVE 23460 Compression Sleeve 16mm 23462 Compression Sleeve 20mm 23464 Compression Sleeve 25mm 23466 Compression Sleeve 32mm 17 75 McCanns Pull-On PEX DL brochure.indd 17 7/5/10 3:02:24 PM
Piping HOT & COLD WATER PIPE (BLACK) STRAIGHT LENGTH 22700 Hot & Cold Water Pipe (Black) 5m Length 16mm 22702 Hot & Cold Water Pipe (Black) 5m Length 20mm 22704 Hot & Cold Water Pipe (Black) 5m Length 25mm 22706 Hot & Cold Water Pipe (Black) 5m Length 32mm HOT & COLD WATER PIPE (BLACK) COIL 22707 Hot & Cold Water Pipe (Black) 25m Coil 16mm 22708 Hot & Cold Water Pipe (Black) 25m Coil 20mm 22709 Hot & Cold Water Pipe (Black) 25m Coil 25mm 22716 Hot & Cold Water Pipe (Black) 25m Coil 32mm 22717 Hot & Cold Water Pipe (Black) 50m Coil 16mm 22718 Hot & Cold Water Pipe (Black) 50m Coil 20mm 22714 Hot & Cold Water Pipe (Black) 50m Coil 25mm 22715 Hot & Cold Water Pipe (Black) 50m Coil 32mm 22710 Hot & Cold Water Pipe (Black) 100m Coil 16mm 22712 Hot & Cold Water Pipe (Black) 100m Coil 20mm HOT & COLD WATER PIPE (BLACK) IN CONDUIT COIL* 22720 Hot & Cold Water Pipe (Black) in Conduit 50m Coil 16mm 22722 Hot & Cold Water Pipe (Black) in Conduit 50m Coil 20mm 18 *Expected availability April/May 2010 75 McCanns Pull-On PEX DL brochure.indd 18 7/5/10 3:02:24 PM
RECYCLED WATER PIPE (PURPLE) STRAIGHT LENGTH 22737 Recycled Water Pipe (Purple) 5m Length 16mm 23738 Recycled Water Pipe (Purple) 5m Length 20mm 23739 Recycled Water Pipe (Purple) 5m Length 25mm Piping RECYCLED WATER PIPE (PURPLE) COIL 22730 Recycled Water Pipe (Purple) 50m Coil 16mm 22732 Recycled Water Pipe (Purple) 50m Coil 20mm 22734 Recycled Water Pipe (Purple) 50m Coil 25mm RAIN WATER PIPE (GREEN) STRAIGHT LENGTH 22747 Rain Water Pipe (Green) 5m Length 16mm 22748 Rain Water Pipe (Green) 5m Length 20mm RAIN WATER PIPE (GREEN) COIL 22740 Rain Water Pipe (Green) 50m Coil 16mm 22742 Rain Water Pipe (Green) 50m Coil 20mm CLIP MASONRY NAIL 23810 Open Clip 16mm Masonry Nail 23812 Open Clip 20mm Masonry Nail 23814 Open Clip 25mm Masonry Nail 19 75 McCanns Pull-On PEX DL brochure.indd 19 7/5/10 3:02:26 PM
Piping CLIP TIMBER NAIL 23816 Open Clip 16mm Timber Nail 23817 Open Clip 20mm Timber Nail 23818 Open Clip 25mm Timber Nail CLIP METAL SCREW 23820 Open Clip 16mm Metal Screw 23822 Open Clip 20mm Metal Screw 23824 Open Clip 25mm Metal Screw PROFILE BEND BRACKET 23830 Profi le Bend Bracket 90 Degree x 5D 16mm 23832 Profi le Bend Bracket 90 Degree x 5D 20mm 23834 Profi le Bend Bracket 90 Degree x 5D 25mm 20 75 McCanns Pull-On PEX DL brochure.indd 20 7/5/10 3:02:26 PM
MANUAL COMPRESSION TOOL KIT 16-20mm 23900 Manual Compression Tool Kit Complete 16-20mm Tools MANUAL COMPRESSION TOOL KIT 16-32mm 23901 Manual Compression Tool Kit Complete 16-32mm MANUAL COMPRESSION TOOL 23902 Manual Compression Tool Only COMPRESSION JAW 23904 Compression Jaw 16-20mm 23906 Compression Jaw 25-32mm MANUAL EXPANDER TOOL 23910 Manual Expander Tool 21 75 McCanns Pull-On PEX DL brochure.indd 21 7/5/10 3:02:28 PM
Tools EXPANDER HEAD 23920 Expander Head 16-20mm 23922 Expander Head 25mm 23924 Expander Head 32mm PIPE CUTTER 23930 Pipe Cutter for 16-25mm Pipe PIPE CUTTER 23932 Pipe Cutter for 16-40mm Pipe BRASS BRUSH 23940 Brass Brush MANUAL COMPRESSION TOOL BOX 23950 Manual Compression Tool Box 22 75 McCanns Pull-On PEX DL brochure.indd 22 7/5/10 3:02:29 PM
Notes 23 75 McCanns Pull-On PEX DL brochure.indd 23 7/5/10 3:02:29 PM
ABN 48 005 465 850 ACN 005 465 850 P.O. Box 793 GEELONG 3220 Tel: (03) 5223 2233 Fax: (03) 5221 8850 Web: www.mccannsplumbing.com.au Email: sales@mccannsplumbing.com.au GEELONG... 498 Latrobe Terrace...Ph: 5223 2233 TORQUAY... 37 Baines Crescent... Ph: 5261 7082 NORTH GEELONG... 361 Thompson Road... Ph: 5272 1744 BACCHUS MARSH... 242-244 Main Street... Ph: 5367 2277 ESSENDON... 358 Pascoe Vale Road... Ph: 9374 2000 SUNSHINE... 226 McIntyre Road... Ph: 9364 6333 YARRAVILLE... 330 Williamstown Road... Ph: 9314 6622 REGENT... 795-799 High Street... Ph: 9470 3366 The MULTI-PEX PEX Plumbing system distributed through McCanns Plumbing Supplies is manufactured by Elson. Disclaimer: All care has been taken to ensure the information provided in this brochure is accurate and reliable but it must be treated as being of a general nature only. Neither McCanns Plumbing Supplies nor Elson Australasia provide any guarantee nor accept any responsibility for information contained in this brochure. 22475 www.newleafdesign.com.au 75 McCanns Pull-On PEX DL brochure.indd 24 7/5/10 3:02:30 PM