STAND OUT FROM THE CROWD. Bisham Abbey, 14th May 2002 INTRODUCTION. Work Smart FIA. The Fibreoptic Industry Association STAND OUT FROM THE CROWD

Similar documents
CHALLENGE OF THE NEW OPTICAL FIBRE TECHNOLOGIES

e-ready Building Next Generation IT infrastructures ϕ The Cabling Partnership AGENDA Opening Remarks Introduction to Installation Standards

AS/NZS ISO/IEC :2012

This is a preview - click here to buy the full publication

infrastructure for 10, 40 and 100Gbits/s readiness

A. General: Horizontal and backbone cabling shall be verified in accordance with ANSI/TIA/EIA-568-C and the addendum for fiber optic testing.

TELECOMMUNICATIONS CABLING INFRASTRUCTURES - Installation Practice, Inspection and Acceptance

VTI Services Technical Bulletin (TB) OTDR Measurement of Installed Optical Fibre Cabling Permanent Links and Links

Fibre (TIA) Field Test Specification

INTERNATIONAL STANDARD

Data sheet OpDAT breakout cable 12x1 OM4 - bend insensitive, class Dca s1 d1 a1

Multipurpose Cables (indoor/outdoor), Multipurpose central tube cable (maxibundle) with glass yarn armouring A-DQ(BN)H 4-24

FIA. The Fibreoptic Industry Association. TECHNICAL SUPPORT GUIDE FIA-TSD

INTERNATIONAL STANDARD

TECHNICAL REPORT IEC/TR Fibre optic communication system design guides Part 11: Multimode launch conditions. Edition 1.

Fibre Optic Connector and Component Standards Developments & Key Issues in IEC & CENELEC. Philip C Longhurst Corporate Fibre Optic R & D Manager

Sumitomo Fiber Specification SE-9** Non-Zero Dispersion Shifted (NZDF) Zero Water Peak Large Effective Area Single Mode Fiber

FIA-TSD OPTICAL FIBRE - DISPOSAL OF WASTE

Industrial Fiber Optic Cables, LSZH Corrugated Armored Cable, Fibers

Link loss measurement uncertainties: OTDR vs. light source power meter By EXFO s Systems Engineering and Research Team

Sumitomo Fiber Specification SE-6** Non-Zero Dispersion Shifted Single-Mode Fiber. PureGuide SM Optical Fiber, TIA Type IVd. Issued: November 2003

The Rise of Tier 2 Testing

Firetuf OFC-UT-CST Fire resistant Armoured Central Tube Cable, variant in red

INTERNATIONAL STANDARD

Data sheet OpDAT mini breakout cable 24x1 OM4 - bend insensitive

ASSMANN ELECTRONIC GmbH ASSMANN SYSTEM GUARANTEE. DIGITUS Professional Fiber Optic Cabling System. Appendix B - Provisions for acceptance

OPTICAL. Micromodule DW About Us. > IEC nd Ed. According to. > EN nd Ed. FTTx

Brochure. Security Designed, Installed by Experts

DNVGL-CP-0402 Edition February 2016

Acceptance Requirements. Fibre Optic Systems. Revised 12/2017. December 5th, Alexander Kölbel

Working in Partnership with our Customers.

ACCESS Master MT9085 Series. Product Introduction

MT-RJ Optical Fiber System Field Testing

Data sheet OpDAT universal cable 1x24 OM4 - bend insensitive

SECTION TESTING OF FIBER OPTIC CABLES

OLTS vs OTDR Tier-2 Expert; How far from Tier-1?

SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media and optical systems characteristics Optical fibre cables

GOF Indoor and Outdoor Cables. Documentation VWL Version 2.2 Source Code R

Field Testing and Troubleshooting of PON LAN Networks per IEC Jim Davis Regional Marketing Engineer Fluke Networks

Fibre Specification Standards

Fiber Tes)ng 101 Essen)als Every Network Analyst Needs to Know. David S(llwell BCNET Oscar Rondon BCNET Gwenn Amice - EXFO

GUCN. Central Loose Tube Cables Universal Indoor / Outdoor - Corrugated Steel Tape Armor (CST) A/I-DQ(ZN)(SR)H Full Rodent Protection v13.

SECTION COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING

M310 Data Center OTDR

outdoor and indoor campus backbone, building backbone (riser) FDDI, Gigabit Ethernet and ATM Easy to install direct burial halogen-free

Fiber Optic Distribution Cables (6-144 Fibers)

This document is a preview generated by EVS

Reflectance, The Hidden Danger That Increases Bit Error Rates in Your Fiber Networks Denver, May 22nd, 2010

GCRG. Multi Loose Tube Cables Universal Indoor / Outdoor A/I-DQ(ZN)BH Improved Rodent Protection v7.0. Ordering Information.

FIBRE OPTIC INSTALLATION QUALITY PLAN PRO-FORMA

GOF Indoor and Outdoor Cables. Documentation VWL Version 1.1 Source Code M

OPTICAL FIBER SOLUTIONS

Kingfisher KI-3800 Light Source. Inexpensive handheld source for testing and commissioning optical fibre networks. Compact and rugged,

INTERNATIONAL STANDARD

4120 Fire Alarm Network Reference

Special Provision No. 683S28 December 2017

FiberExpress Solutions

Fire Control Panels. Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting. Features. Operation.

Optical Return Loss Measurement by Gregory Lietaert, Product Manager

Telephone and Data Structured Wiring

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

M310 Enterprise OTDR. Designed for Enterprise Network Testing, Troubleshooting and Documentation. or (800) , (603)

Noyes OFL 250B Specs Provided by

VIEW500 USER-FRIENDLY STANDARD OTDR

Acterna MTS 5000 e Series OTDR and Loss Test modules

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Product Specification Qualification Test Report

FTTX Solutions Mini Rapid Fiber Distribution Terminal (RDT)

Field Test Procedure for Optical Fibre Link Measurements

GAMMA OTDR application consists of main window and menu. Using menu user can operate in different modes of application.

Cat 6 Shielded Patch cords

MINI2. Inno Mini 2 Specs Provided by MOST ACCURATE COMPACT OTDR

Remote fiber testing to improve SLA s

EXECUTING HIGHLY ACCURATE FIBER MEASUREMENTS IN A FRACTION OF THE TIME

INTERNATIONAL STANDARD

GBRD. Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection. Ordering Information. Applications. Features & Benefits

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

OptiFiber Pro OTDR Built for the enterprise

HELKAMA. Optical Fibre Cables

/Oct/2014 Rev B

Draft ES V1.1.1 ( )

Universal Connectivity Platform A Modular Approach to Infrastructure Design

This is to certify that the optical output of the: SENSORNET LR-DTS Temperature Sensing System: (Variants Mark 1, Mark 2a and Mark 2b)

MINI2 MOST ACCURATE COMPACT OTDR

LCS 2 THE CATEGORY 6A GUARANTEE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

M310 Enterprise OTDR. Designed for Enterprise Network Testing, Troubleshooting and Documentation. or (800) , (603)

Ensuring Cabling Performance in the Customer-Owned Outside Plant

SECTION TESTING OF FIBER OPTIC CABLES

Duct Cable GYTS-144B1.3

Ensuring Cabling Performance in the Customer-Owned Outside Plant. Keith Foord Product Manager Greenlee Communications

INTERNATIONAL STANDARD

OWL. Laser OWL Series. Operations Guide. Singlemode Light Sources. Optical Wavelength Laboratories. Date: October 1, 2015

ETSI TS V1.2.1 ( )

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. July 2017

Confused by standards Standards for social alarms

TESTING HIGH SPEED FIBER LINKS

VIEW500 FASTEST STANDARD OTDR

FLX380-30x FlexTester OTDR

AE2200 FTTx Multi-Function Meter

Transcription:

INTRODUCTION Work Smart FIA STAND OUT FROM THE CROWD 14th May 2002, Bisham Abbey Mike Gilmore 2002 Fibreoptic Industry Association

Work Smart www.it-cabling.com www.e-readybuilding.com PO Box MT65, LEEDS, LS17 8YD, United Kingdom Tel: +44 (0) 113 232 3721 Fax: +44 (0) 113 232 3724 Mike Gilmore, Senior Partner Secretary: ISO/IEC JTC1 SC25 WG3: Generic Cabling Member: ISO/IEC JTC1 SC25 Project Team: SOHO Convenor (1994-2002): CENELEC TC215 WG1: IT Cabling Chairman: BSI TCT7/-/1: IT Cabling Chairman: BSI TCT7/-/3: IT Cabling Support Group Technical and Standards Director, Fibreoptic Industry Association mike.gilmore@btinternet.com 2002 Limited

The End is Nigh To be published as EN 50173-1 EN 50173 Ed.2 (2002) Information technology - Generic cabling systems ISO/IEC 11801 Ed.2 (2002) Information technology - Generic cabling for customer premises ANSI/TIA/EIA 568 B Series Commercial building telecommunications cabling standard SE Completed 6MP begins July, 2001 3MV begins Q2, 2002 publication Q4, 2002 2nd CD Completed FCD Completed FDIS Q2, 2002 publication Q4, 2002 B.1 General Requirements published B.2 Balanced Cabling published Addendum 1 Category 6 Draft 11 B.3 Optical Fibre Cabling published 2002 Limited

Market Conditions - A Bleak Future Balanced Unscreened Screened Category 5 (1995) Category 5 (2000) Category 5e Category 6 Category 7 Optical Fibre MMF SMF OM1 OM2 OM3 OS1 Established standards Commoditisation Category 6e? Category 8? No high-margin rabbits Technology Squeeze Margin Reduction Balanced Unscreened Screened Category 5 (1995) Wireless y 5 (2000) Category 5e Category 6 Category 5 (1995) Category 7 Category 5 (2000) Optical Fibre MMF SMF OM1 OM2 OM3 OS1 2002 Limited

Copper - A Nightmare Scenario? installation tolerance unmanaged channel performance Connectivity management Cat. 5 Cat. 5e Cat.6 Cat.7 Cat. 5 Cat. 5e Cat.6 Cat.7 Cat. 5 Cat. 5e Cat.6 Cat.7 plus the undermining the reference implementation approach 2002 Limited

1GbE Performance Margin - What Margin? Attenuation coefficient (dbkm -1 ) 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 Wavelength (nm ) 850nm 1300nm 1310nm 62.5/125 50/125 62.5/125 50/125 SMF OFL Modal Bandwidth (MHz.km) 200 500 500 500 Assumed OF attenuation (dbkm -1 ) 3.75 3.50 1.5 1.5 0.5 1000BASE -SX -LX 830nm 1270nm 1270nm Maximum channel length (m) 275 550 550 550 5000 Max. OF cable attenuation (db) 1.1 2.06 0.85 0.85 2.57 Connecting hardware allowance (db) 1.5 1.5 1.5 1.5 2.0 Maximum Channel Insertion Loss (db) 2.60 3.56 2.35 2.35 4.57 2002 Limited

10GbE Performance Margin - What Margin? Attenuation coefficient (dbkm -1 ) 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 Wavelength (nm ) 850nm 1300nm 1310nm 62.5/125 50/125 MMF SMF OFL Modal Bandwidth (MHz.km) 200 500 500 Assumed OF attenuation (dbkm -1 ) 3.50 3.50 1.5 0.4 1550nm 10GBASE -SR/SW -LX4 -LR/LW -LX4 -ER/EW 830nm 1269-1269- 1270nm 1356 nm 1356 nm 1550nm Maximum channel length (m) 33 82 300 10000 10000 40000 Max. OF cable attenuation (db) 0.12 0.30 0.46 4.20 4.20 Connecting hardware allowance (db) 1.5 1.5 1.5 2 2 Maximum Channel Insertion Loss (db) 1.62 1.80 2.46 6.20 6.20 10.9 0.5 2002 Limited

Application-specific Cordage n 2 Launch device or cord with ~ 20 µm fset n 1 (r) 1000BASE -SX -LX 62.5/125 50/125 62.5/125 50/125 SMF 830nm 1270nm 1270nm Internal to eqmt Cord required NA SMF Offset MMF MMF Mode conditioning cord 2002 Limited

WAN Opportunities? Trans-national, international and trans-oceanic Metropolitan Area The WAN Access Network The WAN Backbone Network G.652 - Characteristics a single-mode optical fibre cable G.653 - Characteristics a dispersion-shifted single-mode optical fibre cable G.654 - Characteristics a cut-f shifted single-mode optical fibre cable G.655 - Characteristics a non-zero dispersion shifted single-mode optical fibre cable 2002 Limited

The Project Model Incorrect specification Over-commitment Consultant No/partial specification User Main contract installer OF Installer Consultant Failure to comply No User Guide Failure reported 2002 Limited

Work Smart Control costs Minimise re-work Eliminate disputes Avoid conflict GET BETTER BUSINESS AT BETTER MARGINS Reduce stress Die happy!!!! 2002 Limited

The Installation Standards BS EN 50174-1 (2001) Information technology - Cabling installation- Part 1: Specification and Quality Assurance BS EN 50174-2 (2001) Information technology - Cabling installation- Part 2: Installation planning and practices inside buildings BS 6701 Code Practice for the installation apparatus intended for connection to certain telecommunications systems BS 7718 Code Practice for the installation fibre optic cabling IEC 60825-1 A.1 (2001) Safety Laser Products Part 1: Equipment classification, requirements and users guide IEC 60825-2 Safety Laser Products Part 2: Safety optical fibre communication systems 2002 Limited

FIA Technical Support The FIA Technical Support Documents providing interpretation delivering guidance fast-track standardisation TSD 2000-1-1 2000-1-3 TSD 2000-3-3 TSD 2000-4-2-1 2000-4-2-2 TSD 2000-5-1 2000-5-2 2000-5-3 DESIGN OPTICAL FIBRE CABLING: LAN APPLICATION SUPPORT GUIDE OPTICAL FIBRE CABLING: DARK FIBRE SUPPORT GUIDE OPERATION POLARITY MAINTENANCE INSTALLATION TESTING OF INSTALLED CABLING: ATTENUATION USING LSPM EQUIPMENT TESTING OF INSTALLED CABLING: ATTENUATION USING OTDR EQUIPMENT SAFETY OPTICAL POWER: SAFETY LEVELS OPTICAL FIBRE: HANDLING OF PROCESSING CHEMICALS OPTICAL FIBRE: DISPOSAL OF WASTE MODELLING TOOLS CABLING STRUCTURES COST MODEL 2002 Limited

Smart Spade Work BE PRO-ACTIVE, NOT REACTIVE read the standards obtain expert advice produce statements compliance develop a specification checklist produce accurate method statements for all aspects the installation process define the in-feed requirement dictate the alternative produce the foundations for the generic User Guide MANAGE YOUR RESOURCE identify the true leaders identify an fice-based project coordinator train each person appropriately in your procedures INVEST IN SOFTWARE web-browser production pdf creation CD production test result readers 2002 Limited

Integration Fibreoptics Anonymous e-mail link Installation Browser User logo User details Consultant details Main Contract Installer details Quality Assurance Specifications User Checklist In-house Quality Plan Method Statements Installation Documentation Test Methods Test Result Administration Component specifications As-built Documentation Connectivity spreadsheets Schematics User Guide Channel Manager Test Results OTDR LSPM OTDR Reader LSPM Reader 2002 Limited

FIA Initiatives WorkSmart Programme INSTALLERS CONSULTANTS USERS Quality Assurance Specifications User Checklist In-house Quality Plan Method Statements Installation Documentation Test Methods Test Result Administration Component specifications As-built Documentation Connectivity spreadsheets Schematics User Guide Channel Manager Test Results OTDR LSPM OTDR Reader LSPM Reader FIA 2002 Limited