Refrigerating Desiccant High polymer membrane dryer VRA2000 Series Port size: Rc1/4, Rc3/8, G1/4, G3/4, 1/4NPT, 3/8NPT JIS symbol Air filter Auto. drain (Module unit) (Separate) Compact Precise (Related products) Clean Electro pneumatic Air booster Speed control valve Silencer Check valve Joint / tube filter Suction plate Magnetic spring buffer Mechanical Electronic Contact / close contact conf. SW Air sensor Pressure SW for coolant flow sensor flow controller for air for water (Gamma) Specifications Model no. VRA2000-8 VRA2000-10 Set pressure range kpa Ambient temperature range -100 to -1 5 to 50 Balance leak flow Maximum flow rate /min (ANR) /min (ANR) 1 Note 3 200 Note 1 Port size IN/OUT 1/4 3/8 Gauge 1/8 Weight kg 0.29 Note 1: Maximum flow rate applies where the secondary side is completely closed, and the primary pressure is adjusted to -101.3kPa while the secondary pressure to -100kPa, then secondary side is fully opened. Note 2: Available only for port size Rc. Note 3: Flow rate when primary pressure is set to -95 kpa or less and secondary pressure to -45 kpa while closed. Characteristics curve Secondary pressure (kpa) 0-20 -40-60 -80-100 How to order VRA2000 0 50 100 150 200 250 Air flow rate ( /min. (ANR)) Note 1: The primary side vacuum pump is measured with using discharge rate 500 /min. Secondary pressure (kpa) 8 A -48-49 -50-51 -52 Port size GB B Option (Attachment) Symbol Descriptions A Port size 8 Rc1/4 10 Rc3/8 8G G 1/4 10G G 3/8 8N 1/4NPT 10N 3/8NPT B Option Blank G P B B3 B4 R2 Set point None Pressure gauge Note 2 Pressure switch Note 2 C type bracket L type bracket B type bracket Digital pressure sensor Note 2-100 -95-90 -85-80 -75-70 Primary pressure (kpa) Ending Applications pump pad VRA vacuum (Page 1030) VFA vacuum filter (Page 1026)
Internal structure and parts list 1 2 VRA2000 Series Internal structure and parts list Refrigerating Desiccant High polymer membrane dryer Air filter 3 Auto. drain VAC (Pump side) 4 5 6 8 SET 7 (Pad side) 9 Parts list No. Parts name 1 Cross headed truss machine screw 2 Knob assembly 3 Adjusting screw assembly 4 Adjusting spring 5 Guard assembly 6 Diaphragm assembly 7 Valve assembly Material Steel PBT Copper alloy, steel, nitrile rubber Stainless steel Aluminum alloy, PBT Aluminum alloy, steel, nitrile rubber Aluminum alloy, copper alloy, hydrogen nitrile rubber (Module unit) (Separate) Compact Precise (Related products) Clean Electro pneumatic Air booster 10 8 9 10 Body assembly Bottom spring Bottom plug assembly Aluminum alloy, stainless steel, nitrile rubber Stainless steel PBT, nitrile rubber Speed control valve Silencer Check valve Repair parts list Part name Diaphragm assembly Valve assembly Model no. VRA2000-D VRA2000-V Joint / tube filter Suction plate Magnetic spring buffer Mechanical Electronic Contact / close contact conf. SW Air sensor Pressure SW for coolant flow sensor flow controller for air for water (Gamma) Ending component
VRA2000 Series Refrigerating Desiccant High polymer membrane dryer Air filter Auto. drain Dimensions VRA2000-8/VRA2000-10 B type bracket (B4) B240 54 58 40 4-6 36 17.3 (Module unit) (Separate) Compact *50 74 86 48 Precise (Related products) Clean Electro pneumatic Air booster Speed control valve C type bracket (B) B220 54 38 69 Silencer 18 45 Check valve Joint / tube 39 7 17.3 filter 64 55 63 44 Suction plate 90 Magnetic spring buffer Mechanical Electronic Contact / close contact conf. SW Air sensor Pressure SW for coolant flow sensor flow controller VAC (Pump side) B SET (Pad side) A L type bracket (B3) B230 54 38 18 18 7 26 69 45 2.3 38 for air Hole dimension for panel mount: 38.5 for water (Gamma) Model no. VRA2000-8 VRA2000-10 A Rc1/4 Rc3/8 B Rc1/8 Rc1/8 Pressure switch (P) PPE-V01-6 15 30 15 8 Ending Pressure gauge (G) VG41D-6-P01 40.5 25 31 *13 R1/8 16 2 conductor 0.15mm 2 Lead wire 3m *12 R1/8 42 With limit mark -100 to 0kPa Main circuit Load Brown line (+) Load current + 5 to 50mA Blue line ( - ) - Power voltage 10 to 30 VDC
Dimensions Digital pressure sensor PPX-R01N-6M VRA2000 Series Dimensions/cautions Refrigerating Desiccant High polymer membrane dryer 30 30 25.5 7.5 9.5 20 PPX 1.5 42.5 R1/8 NPT1/8 20 1 Connector 12 M5 female thread M3 female thread depth 4 Air filter Auto. drain (Module unit) (Separate) Compact Precise (Related products) Clean Electro pneumatic Air booster Speed control valve Silencer Note: Refer to page 1104 for details of digital pressure gauge PPX Series. Safety precautions WARNING 1 Use the product within specifications. 2 The product is a for vacuum. Do not use in a pressurized state. 3 Install the product avoiding direct sun lay. 4 Do not use this product in an atmosphere containing corrosive gas, chemicals, or sea water, or where these could come in contact with it, and do not use as a vacuum circuit for these substances. CAUTION 1 Install this product vertically with the knob facing upward or downward. 2 Before connecting to devices, flush piping with air to remove foreign matter. 5 Avoid installation where vibration or impact is applied. 6 Tighten pipes with the appropriate torque. 7 Limit bending moment arising from the weight of pipelines to 50 N m or less when installing. Port thread Rc1/4 Rc3/8 Tightening torque N m 6 to 8 13 to 15 3 Check that pipe thread swarf or sealant does not enter when piping or screwing in joints. 4 Check IN and OUT orientations of piping before connecting. 5 Note that this product is adjusted with constant air leakage, so vacuum pressure may not rise if the vacuum pump capacity is too small. Check valve Joint / tube filter Suction plate Magnetic spring buffer Mechanical Electronic Contact / close contact conf. SW Air sensor Pressure SW for coolant flow sensor flow controller for air for water (Gamma) Ending component