- 1 - SHAH SHAHBAZ BAHUDDIN AHMED Objective Association with the growth oriented organization in a capacity Having effective utilization of engineering background and offering Career opportunities. Present Experience At present I am working with M/S.Schneider Electric formerly M/S.AREVA T&D Pakistan as Senior Executive Engineer in Services Department. Job Responsibilities as Senior Executive Engineer Testing & Commissioning Variable Frequency Drives, Soft Starter and Programmable Logic Controllers. Testing & Commissioning BMS System. Testing of all type protection Relays. (Trafo Differential, Line Differential, over current, Earth fault, Trip Circuit Supervision, Directional over Current, Check Synchronism, Under/Over Voltage, High Impedance Differential). Experience in testing works of HV/MV/LV GIS/AIS primary equipment such as Current Transformer, Voltage Transformers, Circuit Breakers, Disconnectors and Surge Arrester etc. Experience in testing, commissioning and calibration works of secondary and ancillary equipment such as Control Relay Panel, Disturbance Recorder, DC Battery Bank & Charger Distribution Board, Low Voltage AC Distribution Board, Neutral Earthing Resistor, Power Quality, Meters, Current & Voltage Transducer, Local control cubical (LCC) test (MCB trip, Aux.relays, Anunciator, time relay, Contactor Function test & Insulation test) etc. Experience in testing work of Power Transformer up to 750MVA 500KV / 220 KV / 120 KV / 33kV including insulation test, ratio test, polarization index test, Zero sequence test, Vector Group Check etc. 11KV & 33KV Sub Station Testing, Commissioning and Maintenance.
- 2 - Troubleshooting and rectification of Customer complaints of Low/ Medium Voltage switchgear at site. Monitoring the activities with their mile stone dates and update the progress of project. To supervise erection works, test and commission various MV/LV electrical systems including Grid stations, Power/Distribution Transformers, 11KV substations, Relay & control Panels, surge arresters, bays of substations, DC system, Ring Main Unit in MV/LV substations,pumping stations, etc. Arrangement of resources required at site for installation of electrical equipments, Transformers, Switchgears, Relay panels and DC system. To review different electrical drawings before ordering, coordinate with client, assist technically to meet client satisfaction. Technical follow-up during engineering and site execution. Involves in progress meetings (Internal, with customers, with subsuppliers) Provide testing schedules for the projects. Erection works and Testing s are made to be witnessed by client/consultant with complete documentation. Testing, commissioning and witnessing activities with client. Implement necessary modifications on site with the coordination of design engineers and get them approved from client. Handing over the project to the client and taking over of job completion certificate. Train end-users on the theory, operational use and maintenance of integrated protection and control systems. Lead or support factory acceptance testing and site testing & commissioning. Develop testing procedures. Proficient in handling of the Secondary Relay Test set OMICRON Test Universe (CMC-156, CMC-256 & CMC-356), FREJA (300 & 306), ISA etc. and Primary Test set (Programma, T&R Sverker, etc) and other electrical test equipment such as Insulation Testers, VLF, Battery Discharge Set, Earth tester, Tan Delta Set, DC Contact Resistance,TTR Test Set & Commissioning Tools. Work on development of proposals including: writing and /or reviewing technical specifications, estimating design person-hours and materials, supporting sourcing for vendor quotations, directing designers and drafts men on drawing requirements, and the development of clarifications and exceptions as well as technical responses.
- 3 - Overseas Projects: Testing and Commissioning of M.V Panels & Protection Relays. At Sahil & Shah (ADCO) Project Abu-Dhabi. Testing and Commissioning of M.V Panels & Protection Relays & give Training for 11 KV Switchgear & Micom Relays at Duqum Project, AL Ansab /AL Muna Project, AL Askara Project. Sultanate of Oman. Oct 2007 to Mar 2008 M/S. BEHZAD IRINATECH W.L.L. (Bahrain) As CHIFE ENGINEER TESTING & COMMISSIONING. Testing and Commissioning of Numerical Protection Relays, Transducers and Digital Meters. Testing of Siemens, ABB and AREVA Numerical Protection Relay. Installation, Testing & Commissioning of EMERSON Network Power Rectifier Panel. Testing of Auxiliary relays like 7PA27, 7PA30, MVAX12, LOR relay, ABB DTT (Direct Transfer Trip) Relays etc. Testing of Bushing CT's for 230kV and 69kV Transformers. Scheme Check & Functional testing of 69 KV, 132 KV, 220 KV control and protection panels. Proficient in handling of the Secondary Relay Test set OMICRON Test Universe (CMC-156, CMC-256 & CMC-356), FREJA (300 & 306), ISA etc. and Primary Test set (Programma, T&R Sverker, etc) and other electrical test equipment such as Insulation Testers, VLF, Battery Discharge Set, Earth tester, Tan Delta Set, DC Contact Resistance,TTR Test Set. Commissioning Tools. Aug 2005 to Oct 2007 M/S. AREVA T&D Pakistan (Private) Limited. Formerly (ALSTOM). As SENIOR TESTING & COMMISSIONING ENGINEER. Testing & Commissioning Variable Frequency Drives, Soft Starter and Programmable Logic Controllers. Testing of all type protection Relays. Final inspection & testing of control & relay panels. Testing & Commissioning of 11KV, LV Switchgear. Handling customer inspection & witness test of LV, MV switchgear at factory.
- 4 - July2003 to July 2005 M/S. TAMCO MIDDLE EAST LTD. (DUBAI). As QUALITY CONTROL (TESTING &COMMISSIONING) ENGINEER. Testing With OMICRON Test Universe CMC- 256 Relay Test Set. Final inspection & testing of LV/MV switchgear in compliance to the IEC Regulations, Local regulation & engineering drawings. Testing works such as DC insulation resistance test, oil test, Secondary injection test, primary injection test, DC contact resistance, CB Timing Test, CT/VT Test, Polarity Test, Trip Test, Stability Test, End to End Test, Auto-Reclose Test, Continuity Check, High and Low Impedance Test Final inspection & testing of ALSTOM control & relay panels (132,33KV) for HV application. With OMICRON Test Universe CMC 356 Relay Test Set and Commissioning Tool. Installation, Testing & Commissioning of 11KV, (ABB ArTU K) LV Switchgear. Installation, Testing & Commissioning of EMERSON Network Power Rectifier Panel. Handling customer inspection & witness test of LV, MV switchgear at factory. Testing & Commissioning Variable Frequency Drives, Soft Stater and Programmable Logic Controllers. Testing & Commissioning BMS System. Testing of all type protection Relays. (Differential, over current, Earth fault, Tripp Circuit Supervision, Directional over Current, Check Synchronizing, Under/Over Voltage, High Impedance Differential. 11KV & 33KV Sub Station Testing, Commissioning and Maintenance. Troubleshooting and rectification of Customer complaints of Low/ Medium Voltage switchgear at site. Control & Relay Panel Testing and commissioning. Incoming and In-process materials control for switchgear assemblies as per ISO 9001 quality standards.
Miscellaneous Projects. - 5-1. ADWEA Contract D-01-0067. Final Inspection & Testing of Control & Relay panels. (33KV) for HV application for 07 Nos Sub Stations. With OMICRON Test Universe CMC 356 Relay Test Set. Coordinate and provide technical assistance to Design engineers for design of protection schemes for industrial and utility substation applications & develop panel and interconnect wiring as well as panel layouts and elevations. Provide technical assistance to SCADA Engineers and control design staff in order to fully develop system integration of protection, control, and monitoring systems. Develop Testing procedures. Testing of complete panel wiring & complete schemes as per approved drawings. 2. DEWA Contract CE / 042B / 2002. (i) Dubai Internet City Sub Station. (ii) Ras Al Khor Sub Station. (iii) Oud Muteena Sub Station. Final Inspection & Testing of ALSTOM control & Relay panels. (132,33KV) for HV application. Testing of Transformer protection, Transformer Differential Protection & REF Protection, Bus Coupler, and Trip circuit supervision schemes. Coordinate and provide technical assistance to Design engineers for design of protection schemes for industrial and utility substation applications & develop panel and interconnect wiring as well as panel layouts and elevations. Provide technical assistance to SCADA Engineers and control design staff in order to fully develop system integration of protection, control, and monitoring systems. Develop Testing procedures. Testing of complete panel wiring & complete scheme as per approved drawings.
- 6 - Testing of Protection Relays.(MICOM P543.MICOM P632, MVAX12,MVAX31,MICOM P122,MICOM P120,MCAG14, MCT139, MVTT14, MCAG34,MVTP31,MVAA11,MVAJ25, MVAJ105,MR21.MVAX12. With OMICRON Test Universe CMC 356 Relay Test Set and Commissioning Tool. 3. DEWA Contract CE/093/2002. (i) Festival City 132KV Sub Station thru ETA-PPD (ii) Golden sands 132 KV Sub Station. thru ETA-PPD (iii) Emirates hills 132KV Sub Station, thru ETA-PPD Final Inspection & Testing of 132KV Relay Panels, 132kV Busbar Protection Panels, and Fault Recorder panels for HV application. Coordinate and provide technical assistance to Design engineers for design of protection schemes for industrial and utility substation applications & develop panel and interconnect wiring as well as panel layouts and elevations. Provide technical assistance to SCADA Engineers and control design staff in order to fully develop system integration of protection, control, and monitoring systems. Develop Testing procedures. Testing of complete panel wiring & complete scheme as per approved drawings Testing of Protection Relays. With OMICRON Test Universe CMC 356 Relay Test Set and Commissioning Tool. 4. Bisha South Sub-station Saudi Electricity Co. 5. Baha East Sub-station Saudi Electricity Co. (i) 132/33/13.8KV SUBSTATION Final Inspection & Testing of ALSTOM control, Relay & synchronizing panels. (132/33/13.8 KV) for HV application. Testing of Transformer protection, Transformer Differential Protection & REF Protection, and synchronizing scheme Develop Testing procedures.
- 7 - Testing of complete panel wiring & complete scheme as per approved drawings Testing of Protection Relays.(MICOM P543.MICOM P632, MVAX12,MVAX31,MICOM P122,MICOM P120,MCAG14, MCT139, MVTT14, MCAG34,MVTP31,MVAA11,MVAJ25, MVAJ105,MR21.MVAX12. With OMICRON Test Universe CMC 356 Relay Test Set and Commissioning Tool. 6. Al Ain Airport Project. Testing & Commissioning of 11KV Panels. Make M/S.TAMCO. Handling customer inspection & witness test of MV switchgear at factory. 7. Four Seasons Hotel Damascus, Syria. Miscellaneous Projects. Testing & Commissioning Variable Frequency Drives, Soft Stater & MCC Panels. Testing & Commissioning of 11KV Panels. Make M/S.TAMCO. Final Inspection & Testing of control, Relay & synchronizing panels. For HV applications in these Projects. Al Aqiq Saudi Electricity Co. Abu Samara Qatar, (Kahrama) Tanuoma Saudi Electricity Co. Suffa South Saudi Electricity Co. Kuwait MBCZ Ministry of Electricity & Water, Kuwait Rakah Busbar Protection Modification, Saudi Electricity Co. Sudan Telecommunication Bldg., Sudan; Yemen Pilot Termination Boxes, Saudi Electricity Co., November2001 to July2003 M/S. ALSTOM PAKISTAN (PVT) LTD. As Technical Assistant in Testing and Inspection department.
- 8 - Nature of works Testing of L.V, M.V, PFI Panels.VACB Breaker test, Vacuum test, Power frequency test. Testing of all type protection relays. August 2000 to November 2001 M/S. CHINA PETROLLEUM ENGINEERING CONSTRUCTION CORPORATION As Electrical Supervisor: Leading for maintance of 54 MGD Sewerage treatment plant Leading a maintence team. Responsible for generation & distribution of power. Maintenance of M.V, L.V Switch gears. Maintenance of submersible pumps. Maintenance of transformer. Developing routine maintenance schedule for L.V, M.V, and Transformers. Ring main unit, Motors, Battery Chargers, and Generators (1250kva). Building services distribution works. Testing and Commissioning: Testing and Commissioning of M.V, L.V, Power, Telephone and Lighting. Testing and Commissioning of Generator change over panels. Testing and Commissioning of motor starter panels. Testing and Commissioning of streetlight. Testing and Commissioning of grounding network system. Supervisor of cable lying of MV (XLPE), Power, Telephone, Lighting and Control Cable. Installation of ring main unit (RMU) SF6. Installation of MV, LV Switch gears. Installation of motor control panels. Installation of D.C.banks and battery charges panels. Installation of cable trays and conduct works. Installation of earthing system for transformer, motors, HT, MV and LV.
- 9 - March 1999 to May 2000 I worked with EL-HANA TRADING EST. as Electrical Supervisor. In Kingdom of Saudi Arabia. May 1997 to March 1999 M/S. AEG Pakistan (Pvt) Ltd. As an Electrical Supervisor. In These projects. KARACHI NUCLEAR POWER PLANT Nature of works Testing and Commissioning of Generator and Panel. Laying and Termination of Control and Power Cables. ENGRO CHEMICAL (PVT) LTD Nature of works Installation of M.V & L.V Switch Gears. Testing & Commissioning of M.V & L.V Switch Gears.
- 10 - ICI PTA PLANT 220 KV Sub Station Nature of works Installation of 220 kv SF6 Breakers. Installation of line disconnectors. Jointing of Transmission Line (T- Joint). Installation of Protection & Control Panel. Testing & Commissioning of SF6 Breaker, Protection relays, Control & PLC Panel. Lying of Control Cables. Apprenticeship Training FEB.1994 to JAN.1997 Got a three years as Apprenticeship Training in MV.LV Switch Gears from M/S. AEG (PVT) LTD.
- 11 - Technical Training Participated in service training covering following and theoretical topic for small and medium sized Flygt pumps. o o o o Preventive service. Mechanical face seals. Major overhaul. Flygt original spare parts. The awareness training on DIN EN ISO 9001:2000/ISO 14000 & OHSAS 18000. o Understanding of ISO 9001:2000/ISO 14000 & OHSAS 18000. o Process approach. o Quality management principales. o Required system documentation and records. Participated in PLC training at ABB STOTZ-KONTAKT Gmbh in Germany. Participated in MICOM Master Protection Relays training at AREVA T & D DUBAI in Dubai. Completing the ADCO H2S & Breathing Apparatus Course at Sahil & Shah Full Field Development Project, Abu Dhabi, UAE. Participated in Advance Protection Relays training at Schneider Electric, Lattes in France.
- 12 - Educational Qualification H.S.C. in Commerce with Second Division Engineering Qualification B-Tech. in Electrical. Three years Electrical Engineering Diploma (Apprenticeship Training) Computer Skills and Software Used MS OFFICE, AUTO CAD-2004. Electrical Utility Soft wears Like: ASPEN, MICOM SI / Studio, CAP, Omicron Test Universe. Languages English: Good conversational. Arabic: Good conversational Urdu: Mother Tung Personal Data Mobile # : +92 (0)3008953596. Home Phone : +922136058489. E-mail : shah_shah451@hotmail.com / shah_shah451@yahoo.com. Date of Birth : 7th September, 1976.