1' [304.80mm] OR 2' [609.60mm] 8' OR 10' LENGTHS AVAILABLE SKU # PANEL SIZE FACE WIDTH GT-3400S 1' X 8' GROOVE WIDTH 34mm 2mm 8 GT-3400S-CS CUSTOM 34mm 2mm 8 # OF GROOVES PER FOOT OF PANEL AVAILABLE EDGE TREAENTS T&G BANDED PRODUCT NOTES: THESE ARE THE STANDARD CONFIGURATIONS. CONTACT GEOMETRIK FOR INFORMATION REGARDING CUSTOM SIZES. CUSTOM SIZES CAN BE UP TO 4'-0" WIDE X 8'-0" LONG. 1' [304.80mm] OR 2' [609.60mm] 8' OR 10' LENGTHS AVAILABLE 8' OR 10' LENGTHS AVAILABLE SKU # PANEL SIZE FACE WIDTH GT-1700S 1' X 8' GROOVE WIDTH 17mm 2mm 16 GT-1700S-CS CUSTOM 17mm 2mm 16 1' [304.80mm] OR 2' [609.60mm SKU # GT-1000S PANEL SIZE 1' X 8' FACE WIDTH GROOVE WIDTH 9mm 2mm 32 GT-1000S-CS CUSTOM 9mm 2mm 32 # OF GROOVES PER FOOT OF PANEL T&G # OF GROOVES PER FOOT OF PANEL AVAILABLE EDGE TREAENTS BANDED AVAILABLE EDGE TREAENTS T&G BANDED HOW TO READ PRODUCT "SKU" : FIRST TWO LETTERS REPRESENT "PRODUCT TYPE" "SKU" ABBREVIATIONS: GT= CS= CUSTOM SIZE 1000S= FACE WIDTH 9mm 1700S= FACE WIDTH 17mm 3400S= FACE WIDTH 34mm MIDDLE SECTION REPRESENTS "FACE GROOVING" (EXAMPLE = 9MM FACE WIDTH W/ 2MM GROOVE WIDTH) GT-1000S-CS REPRESENTS OVERALL "PANEL SIZE" (EXAMPLE = 2' W X 4' L) TYPICAL FACE DETAIL PRODUCT CONFIGURATIONS
2mm WIDE FACE GROOVING HIDDEN LINE INDICATES PERFORATION TO B/S OF PANEL 1 7/16" [36.50] TOP VIEW - PLAN PANEL TONGUE 11 1/2" [292.00] 2mm WIDE FACE GROOVING PANEL GROOVE NON-WOVEN ACOUSTIC FABRIC BACKER END VIEW PERFORATION TO B/S OF PANEL TYPICAL FACE DETAIL - GT-3400S
2mm WIDE FACE GROOVING HIDDEN LINE INDICATES PERFORATION TO B/S OF PANEL 23/32" [18.25] TOP VIEW - PLAN PANEL TONGUE 11 1/2" [292.00] 2mm WIDE FACE GROOVING PANEL GROOVE NON-WOVEN ACOUSTIC FABRIC BACKER END VIEW PERFORATION TO B/S OF PANEL TYPICAL FACE DETAIL - GT-1700S
2mm WIDE FACE GROOVING HIDDEN LINE INDICATES PERFORATION TO B/S OF PANEL 11/32" [9.12] TOP VIEW - PLAN PANEL TONGUE 11 1/2" [292.00] 2mm WIDE FACE GROOVING PANEL GROOVE NON-WOVEN ACOUSTIC FABRIC BACKER END VIEW PERFORATION TO B/S OF PANEL TYPICAL FACE DETAIL - GT-1000S
BLACK HEAVY DUTY 15/16" MAIN T-BAR @ 2'-0" O.C. (BY INSTALLER) 12 GA. WIRE PAINTED BLACK (BY INSTALLER) PANEL DIRECT ATTACHMENT OF CLIP TO T-BAR WITH SCREW (BY INSTALLER) GEOMETRIK T&G CLIP TYP. 4-5 PER PANEL CLIP INSTALL DETAIL - CEILING PLANKS JUNE-10-2011
WALL WALL PERIMETER SHADOW DETAIL APRIL 1-2011
FACTORY ATTACHED ACOUSTICAL FABRIC BACKER. ACCESS PANEL SECTION OPENING CUT BOARDS FOR ACCESS PANEL ATTACH CUT BOARDS TO SHORT PIECES OF T-BAR OR EQUAL THAT WILL BRIDGE THE UNCUT CEILING OPENING. OPTIONAL WOOD STOP MAY BE REQUIRED TO KEEP CEILING PANEL IN CORRECT POSITION. NOTE: VERIFY IN FIELD SIZE AND LOCATION OF ACCESS PANELS. ACCESS PANEL DETAIL - GT-3400S
INDEPENDENT SUSPENSION WIRE FOR LIGHT FIXTURE (BY INSTALLER) APPROVED LIGHT FIXTURE (BY INSTALLER) BRACKETING FOR LATERAL STABILITY ONLY (BY INSTALLER) * 6" MAX. BLACK HEAVY DUTY 15/16" T-BAR GRID @ 2' O.C. (CROSS TEE'S NOT SHOWN). NOTE: CUT PANELS MAY HANG UNSUPPORTED A MAXIMUM OF 6" FROM NEAREST T BAR CLIP. PANEL LIGHT DETAILS - GT-3400S
WALL ACOUSTICAL INSULATION BLANKET OPTIONAL (BY INSTALLER) WOOD FURRING FOR DIRECT ATTACHMENT (BY INSTALLER) GEOTONE WOOD ACOUSTICAL PANEL WITH FACTORY ATTACHED ACOUSTICAL MEMBRANE GEOTONE DIRECT ATTACHMENT - PLAN VIEW WOOD FURRING FOR DIRECT ATTACHMENT (BY INSTALLER) WOOD FURRING FOR DIRECT ATTACHMENT (BY INSTALLER) GEOTONE WOOD ACOUSTICAL PANEL WITH FACTORY ATTACHED ACOUSTICAL MEMBRANE GEOTONE WOOD ACOUSTICAL PANEL WITH FACTORY ATTACHED ACOUSTICAL MEMBRANE DIRECT NAIL THRU GROOVE FOR SECURING ONE SIDE OF THE PANEL TO WOOD FURRING TYP. GEOMETRIK T&G CLIP SCREWED TO BACKER SIDE VIEW SIDE VIEW DIRECT WALL ATTACHMENT DIRECT NAIL & CLIP