General Description The is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous conduction mode (DCM) flyback power supplies. The provides accurate constant voltage, constant current (CV/CC) regulation while removing the opto-coupler and secondary control circuitry. It also eliminates the need of loop compensation circuitry while maintaining stability. The achieves excellent regulation and high average efficiency, yet meets the requirement for no-load consumption less than 100mW. The is available in SOT-23-5 package. Features Primary Side Control for Rectangular Constant Current and Constant Voltage Output Secondary CV/CC Control Circuitry Eliminating Opto-Coupler No Need for Control Loop Compensation Circuitry Flyback Topology in DCM Operation Random Frequency Modulation to Reduce System EMI Maximum Switching Frequency: 60kHz Built-in Soft Start Open Feedback Protection Over Voltage Protection Short Circuit Protection Small SOT-23-5 package to achieve compact size and less component Applications Adapters/Chargers for Cell/Cordless Phones, PDAs, MP3 and Other Portable Apparatus Standby and Auxiliary Power Supplies LED Driver SOT-23-5 Figure 1. Package Type of 1
Pin Configuration K Package (SOT-23-5) OUT 1 5 FB GND 2 VCC 3 4 CS Figure 2. Pin Configuration of (Top View) Pin Description Pin Number Pin Name Function 1 OUT This pin drives the base of external power NPN switch 2 GND Ground 3 VCC Supply voltage 4 CS The primary current sense 5 FB The voltage feedback from the auxiliary winding 2
Functional Block Diagram VCC 3 FB 5 0.1V COMP pfm Tonsec Detector Tons Regulator & Bias UVLO EA OCkP 4.0V Constant Voltage Control R Q CV_ctrl pfm Driver 1 OUT S CS 4 Peak Current Control & LEB Tons Constant Current Control R Q CC_ctrl 2 GND S Figure 3. Functional Block Diagram of 3
Ordering Information - Circuit Type Package K: SOT-23-5 G1: Green TR: Tape and Reel Package Temperature Range Part Number Marking ID Packing Type SOT-23-5 -40 to 85 o C KTR-G1 GAT Tape & Reel BCD Semiconductor's products, as designated with "G1" suffix in the part number, are RoHS compliant and Green. Absolute Maximum Ratings (Note 1) Parameter Value Unit Supply Voltage VCC -0.3 to 30 V Voltage at CS, OUT to GND -0.3 to 7 V FB input (Pin 5) -40 to 10 V Output Current at OUT Internally limited A Operating Junction Temperature 150 o C Storage Temperature -65 to 150 o C Lead Temperature (Soldering, 10s) 300 o C Thermal Resistance Junction-to-Ambient 250 o C/W ESD (Machine Model) 200 V ESD (Human Body Model) 2000 V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. 4
Electrical Characteristics (V CC =15V, T A =25 o C, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit UVLO SECTION Start-up Threshold V TH (ST) 16.5 19.5 22.5 V Minimal Operating Voltage V OPR (min) 5.8 7.5 9.5 V STANDBY CURRENT SECTION Start-up Current I ST V CC =V TH (ST) -0.5V, Before start-up 45 60 µa Operating Current I CC(OPR) Static 250 350 µa DRIVE OUTPUT SECTION OUT Maximum Current Sink I OUT 50 ma Source 24 32 40 Maximum Switching Frequency 60 khz CURRENT SENSE SECTION Current Sense Threshold V CS 410 465 530 mv Pre-Current Sense V CS(PRE) 345 395 440 mv Leading Edge Blanking 750 ns FEEDBACK INPUT SECTION Feedback Pin Input Leakage Current I FB V FB =4V 2 2.8 3.6 µa Feedback Threshold V FB 3.70 3.95 4.20 V Over Voltage Protection V FB(OVP) 6.4 8 9.6 V Dec. 2011 Rev. 1. 6 5
Typical Performance Characteristics 21 100 20 80 Start-up Voltage (V) 19 18 17 Start-up Current (µa) 60 40 16 20 15-40 -20 0 20 40 60 80 100 120 Ambient Temperature ( o C) 0-40 -20 0 20 40 60 80 100 120 Ambient Temperature ( o C) Figure 4. Start-up Voltage vs. Ambient Temperature Figure 5. Start-up Current vs. Ambient Temperature 400 350 Operating Current (µa) 300 250 200 150 100-40 -20 0 20 40 60 80 100 120 Ambient Temperature ( o C) Figure 6. Operating Current vs. Ambient Temperature 6
Typical Application T1 D2 + C1 R1 R5 C3 + + D1 C4 C2 Np Ns VO+ R2 D3 VO- R3 VCC OUT Q1 R6 Nfb CS FB R4 GND R7 Rs Figure 7. 5V/500mA Output for Battery Charger of Mobile Phone 7
Mechanical Dimensions SOT-23-5 Unit: mm(inch) 2.820(0.111) 3.020(0.119) 0.100(0.004) 0.200(0.008) 2.650(0.104) 2.950(0.116) 1.500(0.059) 1.700(0.067) 0.300(0.012) 0.600(0.024) 0.200(0.008) 0.700(0.028) REF 0.950(0.037) TYP 1.800(0.071) 2.000(0.079) 0.300(0.012) 0.400(0.016) 0 8 1.450(0.057) MAX 0.000(0.000) 0.150(0.006) 0.900(0.035) 1.300(0.051) 8
http://www.bcdsemi.com IMPORTANT NOTICE reserves the right to make changes without further notice to any products or specifications herein. does not assume any responsibility for use of any its products for any particular purpose, nor does assume any liability arising out of the application or use of any its products or circuits. does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD - Headquarters Semiconductor Manufacturing Limited - Wafer BCD FabSemiconductor Manufacturing Limited BCD - Wafer Semiconductor Fab Manufacturing Limited Shanghai - IC Design SIM-BCD Group Semiconductor Manufacturing Co., Ltd. No. Shanghai 1600, Zi SIM-BCD Xing Road, Semiconductor Shanghai ZiZhu Manufacturing Science-based Limited Industrial Park, 200241, China 800 Yi Advanced Shan Road, Analog Shanghai Circuits 200233, (Shanghai) China Corporation Tel: 800, +86-21-24162266, Yi Shan Road, Shanghai Fax: +86-21-24162277 200233, China Tel: +86-21-6485 8F, Zone B, 900, 1491, Yi Fax: Shan +86-21-5450 Road, Shanghai 0008200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE REGIONAL Shenzhen OfficeSALES OFFICE Shanghai Shenzhen SIM-BCD Office Semiconductor Manufacturing Co., Ltd., Shenzhen Office Unit Shanghai A Room SIM-BCD 1203, Skyworth Semiconductor Bldg., Gaoxin Manufacturing Ave.1.S., Nanshan Co., Ltd. District, Shenzhen Shenzhen, Office China Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Taiwan Office BCD Taiwan Semiconductor Office (Taiwan) Company Limited 4F, 298-1, BCD Rui Semiconductor Guang Road, (Taiwan) Nei-Hu District, Company Taipei, Limited Taiwan 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, USA Office USA BCD Office Semiconductor Corp. BCD 30920 Semiconductor Huntwood Ave. Corporation Hayward, 30920 CA 94544, Huntwood USA Ave. Hayward, Tel: Room +86-755-8826 E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel: +886-2-2656 Taiwan 2808 CA Tel : 94544, +1-510-324-2988 U.S.A Fax: Tel: +86-755-8826 7951 7865 Fax: +86-755-8826 7865 Fax: +886-2-2656 Tel: +886-2-2656 28062808 Fax: +886-2-2656 2806 Tel Fax: : +1-510-324-2988 +1-510-324-2788 Fax: +1-510-324-2788