Ductable Range of Air Conditioners
The world is witnessing growth at a breakneck speed. The upsurge in economic and social activities has led to rampant use of natural resources like water, minerals, energy, etc. This speed of progress has taken a great toll on our environment. Taking cognizance of the situation, Hitachi has taken a pledge to leave no stone unturned and do its bit in creating a sustainable society. It is for this reason every innovation and creation that comes from Hitachi revolves around the idea of creating a green and sustainable tomorrow. The foundation of which is laid by coming up with products that have minimum impact on the environment. To make sure what we create today does not affect our tomorrow. Hitachi reached its first milestone by introducing the first range of Ductable Air Conditioners with Eco-Friendly Refrigerant (R410A). It s designed to achieve higher efficiency without being harsh on nature. GREEN. EFFICIENT. SAFE. Prevention of Global Warming Conservation of Resources Preservation of Ecosystem Towards a Sustainable Society
Features Eco-Friendly Refrigerant Takumi Series comes with R410A which is an environmentally sustainable refrigerant. Technically, it is a superior refrigerant having Zero ODP (Ozone Depleting Potential) and Low GWP (Global Warming Potential). Hence, it is safe and eco-friendly. Space Creator It s a revolutionary design of Indoor Unit that gives 27% more vertical space for ceiling designs. Now the Indoor Unit can be installed with specially designed mountings directly on to the ceiling instead of installing them with hangers. It doesn t just offer more heights but also extra space to design interiors. More space for indoor interiors Lesser false ceiling height No need of hangers Traditional M/C Height in mm Takumi M/C Height in mm Reduction Ceiling to M/C 150 25 M/C Height 460 440 195 mm Clearance for Drain & FC 100 50 Total 710 515 Table showing the decrease in false ceiling height from the ceiling Illustration showing the new installation features (8.5 Tr & 11.0 Tr) Variable Speed Condenser Fan Motor The Microcontroller senses the ambient temperature with the help of Ambient Temperature Sensor and adjusts the fan speed accordingly, hence ensuring lower power consumption and efficient cooling. Thus, in case of high ambient temperature, the fan speed increases, minimizing the derating of compressor capacity without affecting the cooling capacity. And, in case of low ambient temperature, the fan speed is reduced to a lower level to suit your cooling requirement. Reduction of derating at higher ambient temperature Lower power consumption with higher capacity of the units, hence higher EER. Available in 5.5, 8.5 & 11.0 Tr Phase Starting of Multiple Units The Takumi Series comes with inbuilt solution to provide a time delay in starting up of compressors when multiple machines are switched on. The Rotary Switch guides the machine s compressors to start one after the other, thus producing low start-up load. Reduced inrush current Lower capacity DG set required Reduces wear & tear of machine & DG set Increases the safety of machine & DG set installed
RS 485 Cable Communication The RS 485 cable is used to ensure effective communication between the Indoor & Outdoor Unit. The cable effectively delivers precise voltage signals between the units so that the machine can perform its functions effectively. Effective on cabling cost Reduces risk of fire & electric shock Low maintenance cost Better communication between ODU - IDU High Ambient Design Designed for high ambient conditions, these units guarantee reliable operation even at 52 C outdoor air temperature. Apart from many other reliability tests, the units have been tested for Maximum Overload condition at 52 C in our state-of-the-art test labs. Optimum cooling capacity Low deration High COP User-Friendly LCD Remote Control Handset The new LCD panel of Remote controller displays all the operating parameters of the machine simultaneously to enable the user to control the desired settings. FEATURES Set Temp. Range from 16 C to 32 C Modes - Auto, Cool, Fan & ACT Compressor Selection Function 7 Day Weekly Timer 4 ON/OFF Timers per Day Optional Features - UV Lamp, Drain Mechanism, Ventilation. Error Code Display Sensible Microprocessor Control The Intelligent Microprocessor integrated in the controller of Takumi Series provides protection against various malfunctions that can hamper the overall health and functioning of the machine. PROTECTS THE AC FROM Low suction pressure (LP) High discharge pressure (HP) Single phasing Reverse phasing Over/under voltage Over current Product Safety Keeping Product Safety & Quality at priority, the Takumi Series comes with the stringent safety features to keep the product up to the mark. Burst proof capacitors used with FR cap High class motor insulation IP55 protection class fan motor Fire retardant material like FR insulation, FR grade blower casing are used for indoor units.
Part Load Operation* When the room temperature is close to the set temperature, the microprocessor shuts off the compressors automatically in a phased manner. Saves energy Provides redundancy Reduces wear & tear of compressor Prevents over cooling *Feature available in 16.5 Tr Phased Starting of Compressors* The microprocessor embedded in controller provides a delay of 15 seconds between the start-up of compressors of the same machine. 350 300 Controls inrush current Reduces load on mains Ensures safety of machine 250 200 150 100 74 200 # 50 Illustration of 16.5 Tr machine *Feature available in16.5 Tr # Considering 2 x 8.5 Tr compressors Run Time Tracking & Equalization of Compressors* The inbuilt feature displays and controls the run time of each compressor. The compressors are sequenced automatically so that the run hours of all compressors are equal. This ensures that no single compressor is subjected to extra wear and tear, thus ensuring longer life. Ensures equal running life of compressors by uniform usage Budget & monitor power consumption Trouble-free operation due to less wear & tear PAC Accessories for Takumi Ductable Air Conditioners UV Lamp with Ventilation *Feature available in 16.5 Tr The UV lamp accessories consist of a UV lamp which emits 265 Nm of effective wavelength which is germicidal in nature. With the continuous operation, bacteria can be killed in hours time. Reduced health risks Good indoor air quality Germicidal UV lamp Prevents sick building syndrome Available in 5.5, 8.5 & 11.0 Tr
ON/OFF Drain Pump Assembly The Drain Pump accessory gets fitted in the Indoor Unit and helps in removing the condensate water quickly and avoids spilling it over the false ceiling. Immaculate interiors Odourless conditioned space Clean & healthy environment Improves working height Available in 5.5, 8.5 & 11.0 Tr Central Station A unique enhancement that controls and monitors multiple ducted (up to 16 max) units with a single central controller. It can be placed anywhere in the air conditioned space. Emergency shutdown Reduced inrush current Compatible with up to 16 units Individual handset enable/disable Individual & simultaneous ON/OFF in sequential manner Self diagnosis Technical Specification -Ductable Split Air Conditioners with Eco-Friendly Refrigerant Tonnage Tr 5.5 8.5 11.0 16.5 Rated Cooling Capacity BTU / HR 66000 102000 132000 198000 Compressor Type Scroll Scroll Scroll Scroll No. of Compressor Nos 1 1 1 3 Refrigerant Type R 410A Rated Power Supply (Volts / Hz / Phase) ODU 400 V/50 Hz/3 Ph IDU 230 V/ 50 Hz /1 Ph Indoor Units Number of IDUs Nos. 1 No. of Fan Nos. 2 3 Air Flow CFM 2200 3400 4400 6600 IDU Dimension (mm) W 1190 1550 1550 2040 H 385 440 440 550 D 675 675 675 1085 Net Weight Kg 65 81 81 185 Outdoor Unit Number of ODUs Nos. 1 No. of Fans Nos. 1 2 Refrigerant Piping (Liquid line) mm 1/2" 5/8" 5/8" 1/2" (Suction line ) mm 7/8" 9/8" 9/8" 7/8" ODU Dimension (in mm) W X H X D 1150 X 795 X 500 1200 X 940 X 550 1200 X 940 X 550 1800 X 910 X 650 Net Weight Kg 118 145 153 310 Note: 1) The rated cooling capacities are based on the following conditions: Indoor Air Inlet Temperature - 27 C (DB) & 19 C (WB) Outdoor Air Inlet Temperature - 35 C (DB) 2) Due to continuous research and development, the product specifications and features may change without prior notice. 3) Product features and specification may vary from model to model. This is an e-waste product and should not be mixed with general household waste at the end of its life. For more details, kindly visit our website or contact Hitachi Dial-a-Care. HITACHI Dial-a-Care AC & R 3532 4848 * 079-30414747 customercare@hitachi-hli.com *Prefix local city/state capital STD code or 079. Hitachi Home & Life Solutions (India) Limited. Head Office: Hitachi Complex, Karan Nagar, Kadi, Distt.- Mehsana - 382727, Gujarat, India. Tel: (02764) 277571. Email: b2bsales@hitachi-hli.com; Website: www.hitachi-hli.com North Region: New Delhi: 011-26991361/ 62/ 63/ 66; Gurgaon: 0124-4262630, 3215533; Ghaziabad: 0120-2823138/ 39; Chandigarh: 0172-2693985/ 2693165; Jaipur: 0141-5115700/ 01; Lucknow: 0522-3249561,4048260; West Region: Mumbai: 022-2527734/ 25271364/ 2527237; Navi Mumbai: 022-27689283/ 87; Pune: 020-32943755; Ahmedabad: 079-26402024, 26401128; Surat: 0261-3110063, 9374240082; Indore: 0731-4050707; East Region: Kolkata: 033-22653383/ 9248, 22265647/ 7434; Bhubaneswar: 0674-2550147, 2552242; South Region: Chennai: 044-2493 5534/ 24953904; Bangalore: 080-26851193; Hyderabad: 040-42024572; 27951027/ 28; Kochi: 0484-2544367, 2544368.