10. Water Dispensers

Transcription

1 0. Water Dispensers 402. General features stainless steal 4. Accessories 422. Sanitation Cooler clean 423. Ozone disinfection 42. Sanitizing protocol 42. Filters guide

2 General features Types of components µm Sediment filter. x 2. /4 stem connectors. Activated carbon filter. x 2. /4 stem connectors. Osmosis system µm Sediment filter. x 2. /4 stem connectors. 2 x Activated carbon filters. x 2. /4 stem connectors. capsulated membrane 80 gallons. State-of-the-art Detox filter, which prevents microbial proliferation. Energy saving system. The dispenser detects the ambient light and switch the system to standby mode when it gets dark. Bacteriostatic system with DETOX activated carbon filter high efficiency. It incorporates a high neck faucet for filling glasses and bottles. Power according to each model Water dispenser FC-2203 F FC-2203 UF FC-2203 RO FC-2203 ROP FC-200 ROP FC-00 F FC-00 UF FC-00 ROP FC-00 RO FC-00 ROP FC-4000 ROP FC-000 ROP FC-200 ROP S FC-00 F FC-00 UF FC-00 ROP FC-00 F S FC-00 UF S FC-00 RO S FC-2004 RO S FC-2000 ROP INOX FC-00 F FC-00 UF FC-800 F FC-800 UF Compressor 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 0 W 20 W 20 W 20 W 20 W 20 W 20 W 90 W 20 W 200 W 00 W 00 W 200 W 200 W water W Antibacterial output protector plastic made. Replaceable and washable. system. and ultrafiltration system. Water production at room temperature. Production water at 4ºC - 2ºC. Equipment designed for high consumptions, nursing homes, hotels, canteens, etc. System with cup holders built-in. Top counter unit. Ideal for small offices and homes. Electronic tap easy to use. Clean and hygienic system not having possibility. to touch the nozzle as conventional dispensers. system. Forced ventilation system for outdoor, high consumption or warm countries. Multifunction information system by LED. Water tank for extra storage at room temperature made of plastic. with large. Made of stainless steel. Stainless steel cabinet special for outdoor or places with pollution. Main components Cabinet made of ABS, side panels made of iron with baked-on paint finish. Tank is made of food grade plastic material. is made of AISI-4 stainless steel with double floating valve and air suction filter. made of AISI-4 stainless steel. compressor from LG. Water is heated by means of an electrical resistance. Hydraulic connections are made of plastic and stainless steel. Adjustable cold water thermostat. Safety hot water thermostat. Production water at 80ºC - 8ºC. system with for higher production. Room temperature Product specifications water temperature: 2- ºC. water temperature: 80-8 ºC. Min. working pressure: 2 bar. Max. working pressure: bar. Refrigerant for compressor: R-34 a. Working voltage: VAC / 0-60 Hz. Reservoir Optional components Please, ask for other connectors, voltages and power frequencies. Ultrafiltration membrane. UV lamp. Remineralising filter. Security system for hot water to avoid children manipulation. Warning label included

3 FC-2203 FC-2203 F x µm Filter 2. x. ( ) x Filter 2. x. ( 2400) FC-2203 UF x µm Filter 2. x. ( ) x Filter 2. x. ( 2400) UF Membrane ( ) FC-2203 RO / FC-2203 ROP x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( 240) 6 FC-00 FC-00 F x µm Filter 2. x. ( ) x Filter 2. x. ( 2400) FC-00 UF x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) UF Membrane ( ) FC-00 ROP x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) x RO Membrane 80 GPD ( 02) x Postfilter 2. x. ( ) L 2 L.8 L Model Temperature Type of FC-2203 F FC-2203 UF FC-2203 RO FC-2203 ROP --Room temp.* --Room temp.* --Room temp.* --Room temp.* Ultrafiltration Model Temperature FC-00 F FC-00 UF FC-00 ROP --Room temp.* --Room temp.* --Room temp.* Type of Ultrafiltration L L L L 2 L 2 L 2 L 2 L L.8 L.8 L

4 FC-00 FC-00 RO / FC-00 ROP x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( 240) FC-200 ROP FC-200 ROP x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( 240) B C L 0 L 2 L Reservoir Model Type of FC-00 RO FC-00 ROP Reservoir L 3 3 Model Temperature 00 FC-200 ROP --Room temp.* Type of L 3.2 L Extra top RO water reservoir L 2 L

5 FC-4000 ROP FC-4000 ROP x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( 240) FC-000 ROP FC-000 ROP x µm Filter 2. x. ( ) 2 x Filter 2. x. ( 2400) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( 240) 0 A 30 A 30 B C B C483.6 L 6 L 4. L 8 L 4 L 8 L Reservoir Reservoir Model FC-4000 ROP Temperature --Room temp.* Type of 9 2 Model Temperature Type of FC-000 ROP --Room temp.* Extra top RO water reservoir.6 L 4. L 6 L L L Extra top RO water reservoir 4 L

6 FC-2004 RO S FC-2004 RO S x µm Filter 2. x. ( ) x Filter 2. x. ( 2430) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( ) FC-200 ROP S FC-200 ROP S x µm Filter 2. x. ( ) x Filter 2. x. ( 2430) x RO Membrane 80 GPD ( 02) x Detox bateriostatic filter 2. x. ( ) 480 A 00 A 320 B 40 C 0 B C4 2 L 3. Model Temperature Type of FC-2004 RO S --Room temp.*,6 Model Temperature Type of 90 FC-200 ROP S --Room temp.* L 23 Counter top Counter top 40 4

7 FC-00-S FC-00 F S x µm Filter 2. x. ( ) x Filter 2. x. ( 2430) FC-00 UF S x µm Filter 2. x. ( ) x Filter 2. x. ( 2430) x UF Membrane ( 24) FC-00 RO S x µm / Filter 2. x. ( ) x RO Membrane 80GPD ( 02) x Postfilter 2. x. ( ) FC-00 FC-00 F x µm Filter 2. x. ( ) x Filter 2. x. ( 2400) FC-00 UF x µm Filter 2. x. ( ) x Filter 2. x. ( 2400) x UF Membrane ( ) FC-00 ROP x µm Filter 2. x. ( ) x Filter 2. x. ( 2400) x RO Membrane 80GPD ( 02) x Detox bateriostatic filter 2. x. ( 240) L.8 L Model FC-00 F S FC-00 UF S FC-00 RO S Temperature --Room temp.* --Room temp.* --Room temp.* Type of Ultrafiltration Model Temperature Type of FC-00 F FC-00 UF FC-00 ROP --Room temp.* --Room temp.* --Room temp.* Ultrafiltration L.8 L.4 L Counter top Counter top Counter top L.8 L.8 L

8 stainless steal FC-800 FC-800 F x µm CS Filter 2. x 0. ( 29803) x CS Filter 2. x 0. ( 29902) FC-800 UF x µm CS Filter 2. x 0. ( 29803) x CS Filter 2. x 0. ( 29902) x UF Membrane ( ) FC-00 FC-00 F x µm CS Filter 2. x 0. ( 29803) x CS Filter 2. x 0. ( 29902) FC-00 UF x µm CS Filter 2. x 0. ( 29803) x CS Filter 2. x 0. ( 29902) x UF Membrane ( ) Model FC-800 F FC-800 UF Temperature Type of Ultrafiltration Outpout flow Model FC-00 F FC-00 UF Temperature Type of Ultrafiltration 8 8 Outpout flow W W

9 Accessories FC-2000 ROP FC-2000 ROP x µm CS Filter 2. x 0. ( 29803) 2 x CS Filter 2. x 0. ( 29902) x RO membrane GPD ( 29200) x Silver 2 x 0 ( 2990) Accessories and spare parts 20 A 4 B C Aluminium cup dispenser Standard cup dispenser 2.2 L 6 L Model FC-2000 ROP stainless steal Temperature Type of Reservoir Cup dispenser with magnetic bracket of Presurized RO water cold water Room temperature tank tank 2.2 L 6 L (2 tank 8 L each one) Transparent plastic cup 200 cc Combinated filter ( µ + ) µm filtration 46 4

10 Accessories Accessories and spare parts Accessories and spare parts RO membrane 80 GPD activated carbon counter top system activated carbon Detox filter counter top system Detox filter Postfilter UF membrane counter top system. 2. µ filtration only for counter top system Postfilter counter top UF Membrane counter top 48 49

11 Accessories Accessories and spare parts Accessories and spare parts Board for FC water dispenser Board for FC-20 Board for FC-0 Board for FC-200 Board for FC-000 Board for FC-00 ROP Board for FC Square tap push-button, white, cold water Square tap push-button, black, hot water (FC-2203) Electric level for FC water dispensers Electric level control for FC-000 water dispenser Electric level control for FC-20 water dispenser Electric level control for FC-0 Electric level control for FC-200 Electric over flow level control for FC Square tap push-button, black, cold water (FC-2203) Electrovalve /4 NC 220 VAC for FC water dispensers Electrovalve /4 NC 24 VDC for FC water dispensers 3 ways electrovalve for FC ways electrovalve for FC-00 3 ways electrovalve for FC-00 Square tap push-botton, white, hot water Square tap push-button, black, room temp. water (FC-2203) Tap push-button for FC-000 water dispenser

12 Sanitation Cooler clean Ozone disinfection Water dispensers. Cooler clean sanitization Ozone injector Cooler Clean spray. Product for the hygienisation of water dispensers. Product supplied in a spray of 00 ml Ozone injector for water dispensers: automatic system for the daily disinfection water dispensers with open tank. Timer: 24 h. Automatic defrosting of the tank every days. Installation accessories includded Cooler Clean. Product for the hygienisation of water dispensers. It includes a dosing device in the container of litre Detection strips for Cooler Clean residues 00 strips 900 Hydroalcoholic gel (leave-in use)

13 Sanitizing protocol Ozone disinfection system When the ozonator module is dosing ozone into the tank, the front LED (4) will light up. In this case, clients must be clearly informed that water cannot be consumed until the LED turns off, which will indicate that ozonation has finished. Should water be needed while the ozonator is working, let it stand for minute before drinking. The connector for the electric control of the dispensing system (9), provides power supply (240 V 0 Hz) if the ozonation cycle is not working (front LED off) and cuts it off when the service cycle is working (front LED on), thus preventing water from being served while the service cycle is working. Installation diagram of the ozone system Components of the ozone system N. Module O3 programmable ozone generator. 2 Air. 3 Ozonated air diffuser. 4 Front LED (Service). Connection for tube with air driven by the. 6 Connection for tube with ozonated air towards the tank. Power supply for air. 8 Service LED connection. 9 Female connection for the electric control of the dispensing system (water dispenser). 0 Electric connection wire (240 VAC 0 Hz). Fuse. NeatWork programme for COLUMBIA cold water dispensers The specific NeatWork programme for cold water dispensers is intended to inform our clients about the available methods and products for the hygienisation and cleaning of our water dispensers at the point of use. Necessary materials "Out of order" sign. Tools. Spare parts and consumables according to each model. Cloths / paper towel. Vessel for emptying water. Cooler Clean. Spray Cooler Clean rinse. Litre with dosing device Strips to detect chemical residues Ref Vinyl gloves. Cotton buds. Previous warnings a. The hygienisation must be carried out by skilled technical personnel, taking into account the appropriate hygienic conditions. b. The systems need a periodic maintenance in order to guarantee the quality of produced water. c. Work in a properly lit area with the appropriate hygienic conditions. d. Before starting, make sure that you have all necessary tools, spare parts and components to carry out the maintenance. e. Do not directly touch with bare hands the components that are going to be in contact with water. Work using vinyl gloves and/ or clean your hands with hygienising soap as often as necessary. f. All tools used to hygienise the system must only be used for this purpose and they must be disinfected before starting this procedure (use Cooler Clean spray and paper towel). g. The spare parts for consumables are supplied in bags, which have been specially designed to guarantee its hygiene during transport. Take special precautions while handling the consumables after taking them out of the bags. Procedure. Since systems are usually installed in public places, put a sign in a visible place of the water dispenser, indicating that it is out of order. OUT OF ORDER 2. Unplug the water dispenser from the power supply and close the water inlet valve towards the system. 3. Empty the cold and hot s by using the front dispensers (and not through the drip cocks). 4. Remove the upper housing, clean the upper side of the tank using the Cooler Clean spray and paper towel.. Remove the lid of the tank and clean the inner side of the lid using the Cooler Clean spray and paper towel. Put the lid on a clean surface and do not clean it on the surface or inner components of the system. 6. Pour inside the tank a dose of Cooler Clean 00 every 2 liters of stored water, according to the water dispenser model ( of the cold + of the hot ). dose / 2 L. Make sure to fill up the tank with tap water. To make so, disconnect the /4 inlet tube in the system and place it at the tank inlet. 8. Put back the tank lid and wait minutes, in order to allow the hygienising product to go through the system. Meanwhile, change filters, make a purge, etc. 9. If the reverse osmosis membrane must be replaced, take out the membrane (only in systems where the membrane is not inside a capsule), and pour 20 drops of Cooler Clean inside the empty membrane housing. Fill up the membrane housing with water and let the product rest inside for minutes. The replaced membrane must be thrown away

14 Filters guide 0. Rinse the membrane housing with tap water in order to throw away all the by-products of the hygienisation. Then insert the membrane in the correct sense, applying previously food-grade glycerine on the o-rings and lip seals, in order to avoid pinching them.. Pay special attention to the hygienisation of faucets. Spray them inside and outside with Cooler Clean spray and rub the inside with a cotton bud. Let tap water flow through the faucets, until making sure there are no chemical residues from hygienisation left. Empty all the water contained in the tanks and close the purge valve. 4. Connect the /4 inlet tube to the inlet connector of the water dispenser.. Put back all the lids of the water dispenser that have previously been removed to carry out the maintenance, and plug the system to the power supply. 6. Empty the tank twice using the hot water tap before the water dispenser is put back to service, and remove the corresponding warning sign. FC-2203 F / FC-00 F / FC-00 F In-line FC µm In-line gac FC Activated carbon Keep the system unplugged from the power supply and with the inlet valve closed. After the hygienising product has been inside for minutes, empty the tanks using the purge valve (at the rear or at the front, depending on each model). 3. Rinse the tanks using tap water and empty them through the rear purge cap. To make so, disconnect the /4 inlet tube from the system and connect it to the tank inlet. (Before connecting it, hygienise the inlet's end with Cooler Clean spray and paper towel). Open the inlet valve and let tap water move the by-products of the hygienisation through the purge valve. FC-2203 UF / FC-00 UF / FC-00 UF In-line FC µm In-line gac FC Activated carbon Ultrafiltration membrane Faucet Tap water Purge outlet Empty all the water stored in the tanks, at least twice, and check there are no chemical residues in rejected water. To make so, use the strips to detect these residues ( 380). FC-00 UF S / FC-00 F S Counter-top In-line fc µm Counter-top In-line Activated carbon FC Ultrafiltration membrane (Only UF) Hygienising residues control Repeat the rinsing process until there are no more chemical residues from hygienisation in rejected water. FC-00 ROP / FC-00 ROP In-line FC µm In-line FC Activated carbon Membrane GPD In-line FC Activated postcarbon

15 Filters guide FC-00 RO S Counter-top In-line fc filtration/ Membrane GPD Counter-top In-line FC Activated postcarbon 2.. INOX FC-2000 ROP µm Activated carbon Membrane 82 GPD 2990 Activated carbon with silver FC-2203 ROP / FC-200 ROP / FC-00 ROP/ FC-4000 ROP / FC-000 ROP In-line fc µm In-line FC Activated carbon Membrane GPD 240 In-line DETOX FC 2.. INOX FC-00 F / FC-800 F µm Activated carbon FC-200 ROP S / FC-2004 RO S Counter-top In-line FC µm Counter-top In-line FC Activated carbon Membrane GPD Counter-top In-line DETOX FC 2.. INOX FC-00 UF / FC-800 UF µm Activated carbon Ultrafiltration membrane

16 Filters guide General hydraulic diagrams General hydraulic diagrams Dispenser equipped with osmosis and reservoir tank FC-00, FC-4000, FC-000 Electrovalve 80 GPD membrane Level valve Level switch Dispenser equipped with ultrafiltration system FC-00, FC-00, FC-2203 µ Detox water tap water tank water tap water tank µ UF membrane water tap water tap Dispenser equipped with osmosis and pressure reservoir tank FC-2000 Electrovalve Pressure tank In-line silver Dispenser equipped with filter system FC-00, FC-800 µ CS CS GPD membrane water tap Room temp. water tap Dispenser equipped with osmosis without reservoir tank FC-2203, FC-200, FC-200, FC-00, FC-00, FC-2004 Electrovalve 80 GPD membrane Level Level valve switch Dispenser equipped with ultrafiltration system FC-00, FC-800 µ Detox water tap µ CS CS UF membrane water tap Dispenser equipped with filter system FC-00, FC-00, FC-2203 µ water tap water tap µ CS CS water tap 4 43