model1117l with1920 ADA Compliant Dual Wall-Mount Fountain and Bottle Filler FEATURES & BENEFITS MODEL CHOICES OPTIONS SPECIFICATIONS

Size: px

Start display at page:

Download "model1117l with1920 ADA Compliant Dual Wall-Mount Fountain and Bottle Filler FEATURES & BENEFITS MODEL CHOICES OPTIONS SPECIFICATIONS"

Steven Lambert
5 years ago
Views:

model1117l with1920 ADA Compliant Dual WallMount Fountain and Bottle Filler FEATURES & BENEFITS CONSTRUCTION Onepiece stamped basin with lowprofi le design made of 14gauge Type 304 stainless steal

BARRIERFREE CONFIGURABLE Supplied with a low profi le bowl, individual adjustable panels, and multiple mounting positions, this fountain can be confi gured for adult and child ADA considerations.

Haws drinking fountains. PUSH BUTTON VALVE The pushbutton activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access.

Shielded, angled stream opening provides a steady, sanitary source of drinking water at.45 gpm. INTEGRATED TRAP Brass 11/4 NPT trap is internally mounted for easy installation and access.

1 cm), inline lead removal element that reduces lead from incoming water supply. Mounting Plate: Model 6700.4L, inwall mounting plate for model 1920 over low side of dual drinking fountains.

1 model1117l with1920 ADA Compliant Dual WallMount Fountain and Bottle Filler FEATURES & BENEFITS CONSTRUCTION Onepiece stamped basin with lowprofi le design made of 14gauge Type 304 stainless steal with integral 1/4 (.6 cm) mounting plate, and vandalresistant bottom plate. Satin fi nish resists stains and corrosion. BARRIERFREE CONFIGURABLE Supplied with a low profi le bowl, individual adjustable panels, and multiple mounting positions, this fountain can be confi gured for adult and child ADA considerations. BOTTLE FILLER Vandalresistant, 14gauge Type 304 stainless steel bottle fi ller housing with push button operation using the same all stainless steel valve with front access serviceability used in Haws drinking fountains. PUSH BUTTON VALVE The pushbutton activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). BUBBLER HEAD Polished chromeplated brass bubbler head with integral basin shank for added strength. Shielded, angled stream opening provides a steady, sanitary source of drinking water at.45 gpm. INTEGRATED TRAP Brass 11/4 NPT trap is internally mounted for easy installation and access. QUALITY CONTROL Both fountains and bottle fi ller are pressure tested to ensure no leaks and proper functionality. OPTIONS Water Filter: Model 6426, 10 x 2 (25.4 x 5.1 cm), inline lead removal element that reduces lead from incoming water supply. Mounting Plate: Model L, inwall mounting plate for model 1920 over low side of dual drinking fountains. Mounting Plate: Model 6700R, onwall mounting plate for 1920 series bottle fi llers, single or dual fountain retrofi t installations. Remote Drinking Fountain Water Chiller: Model HCR8, 8 gph (30.3 L) remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water. Custom Logo Panel: Standard Model 6475 comes with Hydration By Haws logo. Customize the panel with your choice of logo, slogan, or graphic. For customization, call MODEL CHOICES 1117L / 6717 / 1920 / BP32 Model 1117L, adjustable height dual fountain with steel inwall mounting plate, stainless steel bottle fi ller and stainless steel back panel. 1117LN / / 1920 / BP32 Model 1117LN, nonadjustable height dual fountain with steel inwall mounting plate, stainless steel bottle fi ller and stainless steel back panel. 1117L / 6717 / 1920 / BP32R Model 1117L, adjustable height dual fountain with steel inwall mounting plate, stainless steel bottle fi ller and reversemount stainless steel back panel. When ordering, ask for model 1117L and note it to be reversed. 1117LN / / 1920 / BP32 Model 1117LN, nonadjustable height dual fountain with steel inwall mounting plate, stainless steel bottle fi ller and reversemount stainless steel back panel. When ordering, ask for model 1117LN and note it to be reversed. SPECIFICATIONS Model 1117L with 1920 Bottle Filler: ADA compliant HiLow, wallmounted drinking fountain and bottle fi ller with push button operation. Fountain shall include dual 14gauge Type 304 stainless steel satinfi nish basins with integral 1/4 stainless steel mounting plates, polished chromeplated brass vandalresistant bubbler heads, polished chromeplated brass vandalresistant waste strainers, adjustable mounting allowing either basin high or low (nonadjustable on 1117N), stainless steel satinfi nish back panel, and 11/4 NPT integral traps. Installed with 6717 ( on 1117LN), inwall 36 x 15 x 3/16 thick steel mounting plate for vandal resistance. Fountain and bottle fi ller use push button operated stainless steel valves with frontaccessible cartridge and fl ow adjustment that provide 100% leadfree waterways, and vandalresistant bottom plates. CSA certifi ed and ADA accessible, ANSI/ NSF 61, Section 9, lead free Kleppe Lane :: Sparks, NV :: p :: f :: e. info@hawsco.com ::

2 1117L

3 1117L

4 THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE L MOUNTING PLATE (BEHIND FINISH WALL) OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) 1920 BP32 (IF FOUNTAIN HIGH/LOW SIDES ARE REVERSED USE BP32R) INSTALLATION ABOVE HAWS 1117L * IF YOUR FOUNTAIN IS THIS STYLE USE THESE DIMENSIONS 3/8" PUSH IN TEE (CONNECT TO FOUNTAIN SUPPLY) 1. SEE SEPARATE INSTALLATION DRAWINGS FOR MOUNTING PLATES AND BACKPANELS 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO FOR INSTALLATION LOCATIONS, WASTE & SUPPLY REQUIREMENTS OTHER THAN SHOWN. C ECN NO. REVISED PER ECN: BY: MODEL(S) MODEL 1117L WITH MODEL 1920 BOTTLE FILLER 1455 KLEPPE LANE SPARKS, NEVADA (775) FAX (775) HAWS@HAWSCO.COM WEBSITE: PART NUMBER DRAWN: DATE: CHK'D.: REVISION GCC 06/13/17 APPROVED: DATE: 0A.1 SCALE: N/A DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 R 2017 Haws Corporation All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. 1117L20 1 of L

5 1117L

6 THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. ADA ADULT ACCESIBLE DIMENSIONS 1117L AND H117.8 H GRILL NOT SHOWN FOR CLARITY ADA CHILD ACCESIBLE DIMENSIONS 1117L AND H H GRILL NOT SHOWN FOR CLARITY C ECN NO. REVISED PER ECN: BY: MODEL(S) MODEL 1117L AND H WITH MODEL 1920 BOTTLE FILLER 1455 KLEPPE LANE SPARKS, NEVADA (775) FAX (775) HAWS@HAWSCO.COM WEBSITE: PART NUMBER DRAWN: DATE: CHK'D.: REVISION GCC 06/13/17 APPROVED: DATE: 0A.1 SCALE: N/A DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 R 2017 Haws Corporation All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. 1117L24 1 of L

7 THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE MOUNTING HOLE LOCATIONS NOTES: 1. C SEE SEPERATE INSTALLATION DRAWINGS FOR MOUNTING PLATES AND BACKPANELS 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO FOR INSTALLATION LOCATIONS, WASTE & SUPPLY REQUIREMENTS OTHER THAN SHOWN. MODEL(S) 1455 KLEPPE LANE SPARKS, NEVADA (775) FAX (775) HAWS@HAWSCO.COM WEBSITE: ECN NO. REVISED PER BY: PART NUMBER 5081 ECN: 5172 MJ DRAWN: DATE: CHK'D.: MODEL 1920/1920HPS/1920W REVISION DS 05/25/16 FV APPROVED: DATE: 2 FV 02/27/17 SCALE: N/A DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 5 R 2017 Haws Corporation All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation D 1117L

8 THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 1/2" IPS SUPPLY 3" [76mm] 3" [76mm] 11/4" IPS WASTE 21/2" [64mm] 3" [76mm] WASTE WASTE Ø7/16" [Ø11mm] SUPPLY MOUNTING HOLES 2X 27/8" [73mm] SUPPLY STOP AND 3/8" OD SUPPLY 41/4" [108mm] 2713/16" [706mm] SUPPLY 81/2" [216mm] MOUNTING DETAIL BACK VIEW 333/4" [857mm] 12 [305mm] 16" 406mm 12 [305mm] BACK PANEL 1/2" [13mm] C L 3 181/2" [470mm] 11/4" IPS TRAP (SUPPLIED) 161/4" 413mm 41/4" [108mm] 11/4" IPS WASTE 8" 203mm MOUNTING PLATE (OPTIONAL) 12" 305mm 10" 254mm 406mm 32" 813mm 36" 914mm 16" 16" 8" 203mm C L 8" 203mm 406mm MOUNTING PLATE (OPTIONAL, HAWS ) *27" 686mm TO FLOOR 383/4" [984mm] 3215/16" [837mm] 3213/16" [833mm] 27" [686mm] 237/8" [606mm] 3/8" O.D SUPPLY WALL FACE FLOOR LINE 3/8" MOUNTING BOLTS 291/4" [743mm] 295/16" [751mm] 353/16" [894mm] 351/2" [902mm] NOTES: 1. HOLD ROUGHIN DIMENSIONS ± 1/8" (3.2mm) WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL CODES SHOULD BE ADHERED TO. FOR INSTALLATION HEIGHTS OTHER THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED ACCORDINGLY. 3 REFER TO 5874SS/VRK5874 OPERATION AND MAINTENANCE MANUAL FOR PUSH BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTRUCTONS. MODEL(S) 1455 KLEPPE LANE SPARKS, NEVADA (775) FAX (775) HAWS@HAWSCO.COM WEBSITE: ECN NO. REVISED PER BY: PART NUMBER 5221 ECN: DRAWN: DATE: CHK'D.: 1117LN REVISION GCC 08/10/17 APPROVED: DATE: 1 SCALE: 1:14 DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 C R Haws Corporation All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation D PAGE 4 of 4

ADA Compliant Wall-Mount Fountain and Bottle Filler

model with1920 ADA Compliant Wall-Mount Fountain and Bottle Filler FEATURES & BENEFITS CONSTRUCTION Barrier-free design with an 18-gauge Type 304 satin fi nished stainless steel swirl bowl assembly mounted