model1119 with1920 ADA Compliant Dual Wall-Mount Fountain and Bottle Filler FEATURES & BENEFITS MODEL CHOICES SPECIFICATIONS OPTIONS

Transcription

1 model with1920 ADA Compliant Dual Wall-Mount Fountain and Bottle Filler FEATUES & BENEFITS CONSTUCTION Unit is made of 18-gauge (14-gauge Stainless Steel on.14) Type 304 stainless steel with a satin fi nish that resists stains and corrosion, and has soft, rounded corners. Unit features stainless steel satin fi nish back panel, vandal-resistant bottom plate, and 1-1/4 integral trap. BAIE-FEE Barrier-free capabilities combined with its ease-of-use allows for a number of installation location possibilities. BOTTLE FILLE Vandal-resistant, 14-gauge Type 304 stainless steel bottle fi ller housing with push button operation using the same all stainless steel valve with front access serviceability used in Haws drinking fountains. PUSH BUTTON VALVE The push-button activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). BUBBLE HEAD Polished chrome-plated brass bubbler head with integral 5/8 diameter basin shank for added strength. Shielded, angled stream opening provides a lead-free, steady.45 gpm water fl ow. BACK PANEL Stainless steel back panels help to protect the wall from inadvertent splashing, and the decorative satin fi nish resists stains and corrosion. INTEGATED TAP All-cast adjustable brass 1-1/4 NPT trap is internally mounted completely concealed within the fountain s bottom plate for easy installation and access. QUALITY CONTOL Both fountains and bottle fi ller are pre-built and fully water and pressure tested to ensure proper functionality. OPTIONS Mounting Plate: Model , Hi-Lo universal mounting plate for most dual bubbler fountains. Mounting Plate: Model L, in-wall mounting plate for model 1920 over low side of dual drinking fountains. Mounting Plate: Model 6700, on-wall mounting plate for 1920 series bottle fi llers, single or dual fountain retrofi t installations. Support Frame: Model 6800, universal in-wall mounting support for use with most fountains. MODEL CHOICES / BP32 / 1920 / 6469 Model fountain with stainless steel back plate, bottle fi ller, and drip tray..14 / BP32 / 1920 / 6469 Model.14 with 14-gauge stainless steel fountains. Stainless steel back plate, bottle fi ller, and drip tray. / BP32 / 1920 / 6469 Model fountain with stainless steel reverse-mount back plate, bottle fi ller, and drip tray..14 / BP32 / 1920 / 6469 Model.14 with 14-gauge stainless steel fountains. Stainless steel reverse-mount back plate, bottle fi ller, and drip tray. SPECIFICATIONS Model with 1920: ADA compliant wall-mounted drinking fountain and bottle fi ller with push button operation. Fountains shall include dual 18-gauge (14-gauge on model ) Type 304 Stainless Steel satin fi nish basins, polished chrome-plated brass vandalresistant bubbler heads, polished chrome-plated brass vandal-resistant waste strainers, stainless steel satin fi nish back panel, high and low fountain mounting levels, and 1-1/4 NPT traps. Fountains and bottle fi ller use 100% leadfree waterways, push-button operated stainless steel valves with front accessible cartridge and fl ow adjustment, and vandal resistant bottom plates. CSA certifi ed and ADA accessible, ANSI/NSF 61, Section 9, lead free Kleppe Lane :: Sparks, NV :: p :: f :: e. info@hawsco.com ::

2 C 2012 Haws Corporation - All ights eserved HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. : ECN: 4797 HM D DAWN: DATE: CHK'D.: DAWING NO.: EV. F. VASQUEZ 04/15/ C00 17 SCALE: 1:13 DAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 3 EFE TO 5874SS/VK5874 OPEATION AND MAINTENANCE MANUAL FO PUSH BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTUCTONS. 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE, O FEDEAL CODES SHOULD BE ADHEED TO. FO INSTALLATION HEIGHTS OTHE THAN SHOWN, DIMENSIONS MAKED (*) MUST BE ADJUSTED ACCODINGLY. NOTES: 1. HOLD OUGH-IN DIMENSIONS ± 1/4" (6.4mm). FLOO LINE MOUNTING PLATE (OPTIONAL, HAWS ) WALL FACE TO FLOO 10" 254mm 8" 203mm *27-5/8" 702mm 686mm *27" MOUNTING PLATE (OPTIONAL) 12" 305mm 8" 203mm 876mm (TO SPOUT OUTLET) *34-1/2" SUPPLY STOP AND 3/8" O.D SUPPLY 29-5/8" 752mm 35-3/8" 905mm *30-3/4" 781mm 406mm C L 406mm *36-1/2" 927mm 36" 914mm 16" 16" 1029mm (TO SPOUT OUTLET) *40-1/2" 32" 813mm 6" 152mm DW G. NO C00 8" 203mm 16-1/4" 413mm 3 1-1/4" IPS TAP (SUPPLIED) 3/8" MOUNTING BOLTS 12-1/4" 324mm 16" 406mm 12" 305mm BACK PANEL 470mm 12.7mm (BACK PANEL) 18" 1/2" 2-1/8" 54mm 12" 305mm TO FLOO MOUNTING DETAIL BACK VIEW 27-7/16" 697mm 3-1/4" 83mm 3-1/4" 83mm 839mm TO FLOO SLOTS *33-1/16" WASTE Ø 9.5mm MOUNTING 5-1/8" 130mm 3/8" 1/2" IPS SUPPLY 2-3/4" 2-3/4" 70mm 70mm 2-3/4" 70mm SUPPLY WASTE WASTE THIS DOCUMENT IS TUE AND COECT AT TIME OF PUBLICATION. CONTINUED PODUCT IMPOVEMENTS

3 - - THIS DOCUMENT IS TUE AND COECT AT TIME OF PUBLICATION. CONTINUED PODUCT IMPOVEMENTS L MOUNTING PLATE (BEHIND FINISH WALL) - O ETOFIT PLATE (ON TOP OF FINISH WALL) 1920 BP32 (IF FOUNTAIN HIGH/LOW SIDES AE EVESED USE BP32) 6469 INSTALLATION ABOVE HAWS,.14 * IF YOU FOUNTAIN IS THIS STYLE USE THESE DIMENSIONS 3/8" PUSH IN TEE (CONNECT TO FOUNTAIN SUPPLY) 1. SEE SEPAATE INSTALLATION DAWINGS FO MOUNTING PLATES, BACKPANELS & DIP TAY 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE O FEDEAL CODES SHOULD BE ADHEED TO FO INSTALLATION LOCATIONS, WASTE & SUPPLY EQUIEMENTS OTHE THAN SHOWN. C ECN: GC.20 DAWN: DATE: CHK'D.: MODEL AND.14 GC 05/31/17 WITH MODEL 1920 BOTTLE FILLE 0A.1 SCALE: N/A DAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 1 of 1

4 THIS DOCUMENT IS TUE AND COECT AT TIME OF PUBLICATION. CONTINUED PODUCT IMPOVEMENTS 1920 MOUNTING HOLE LOCATIONS NOTES: 1. C SEE SEPEATE INSTALLATION DAWINGS FO MOUNTING PLATES AND BACKPANELS 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE O FEDEAL CODES SHOULD BE ADHEED TO FO INSTALLATION LOCATIONS, WASTE & SUPPLY EQUIEMENTS OTHE THAN SHOWN ECN: 5172 MJ DAWN: DATE: CHK'D.: MODEL 1920/1920HPS/1920W DS 05/25/16 FV 2 FV 02/27/17 SCALE: N/A DAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF D

5 THIS DOCUMENT IS TUE AND COECT AT TIME OF PUBLICATION. CONTINUED PODUCT IMPOVEMENTS BOTTLE FILLE DIP TAY INSTALLATION ECN: 5150 MJ DAWN: DATE: CHK'D.: DAWING, 6469 BOTTLE FILLE DIP TAY MJ 01/10/17 DS 1 FV 01/16/17 SCALE: 1:4 DAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 C D

6 THIS DOCUMENT IS TUE AND COECT AT TIME OF PUBLICATION. CONTINUED PODUCT IMPOVEMENTS STEP 1 ATTACH SUPPLIED BACKET TO WALL USING APPOPIATE FASTENES. BACKET IS INSTALLED OVE THE HIGH-SIDE OF THE DINKING FOUNTAIN MODEL 1920 ADHESIVE SIDE MODEL BP32 / BP32HPS MODEL 1920 STEP 2 PLACE THE BACKPLATE AGAINST THE WALL AND SLIDE SIDEWAYS SO THE TABS CATCH UNDE THE BACKET 8 SPACES (2 PE MOUNTING BOLT IF THE MOUNTING PLATE IS INSTALLED BEHIND THE FINISHED WALL. USE 1 SPACE PE BOLT FO ETOFITS WHEE THE MOUNTING PLATE IS INSTALLED IN FONT OF THE FINISHED WALL) MODEL BP32L C STEP 3 INSTALL THE BOTTLE FILLE PE THE INSTUCTIONS SUPPLIED WITH THE UNIT NOTES: 1. WHEN INSTALLING THIS UNIT, LOCAL, STATE O FEDEAL CODES SHOULD BE ADHEED TO. INSTALLATION OVE DOUBLE FOUNTAIN SHOWN FOM EA 5081 ECN: 5172 MJ DAWN: DATE: CHK'D.: DAWING, BACK PANEL SPACE INST, BF MJ 02/02/17 FV 2 FV 02/27/17 SCALE: 1:1 DAWING TYPE: INSTALLATION SIZE: A SHEET 2 OF D