TTB582PMP Barcode: Ref. No.: 55753

Transcription

1 Original Instructions_DFT_TTB582PMP(XKS-751PW)_V1_ TTB582PMP Barcode: Ref. No.: 55753

2 Submersible Pump TTB582PMP

3 This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the product. Cleaning and user maintenance shall not be made by children without supervision. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard. Pump safety warnings This product is to be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 ma. Prevent access of children with appropriate measures. Do not use when people are in the water. Do not operate the pump without water. Make sure that no marine animals (e.g. fish) are extracted by the product. Have in mind that pollution of the liquid could occur due to leakage of lubricants. Protect the electrical connections and cords from heat, oil, sharp edges and moisture. Protect the product from frost and running dry. Avoid circulation of aggressive fluids of abrasive materials. Do not use the power cord or the float switch cable to transport or secure the product. Fix a rope to the handle for submerging, lifting or securing Check and clean the outlet and the inlet of the pump when needed. Do not pump liquids with sand or other abrasive substances. It causes increased wear and reduces the pumps output. The product is designed for clear water with a diameter of suspended impurities not exceeded 30mm. The product should be used for pumping water temperature below 35 C, do not use the product for other liquids (hydrocarbons, oils, corrosive liquids, flammable liquids ). Never use the product in case of danger of frost. The product is not designed for continuous

4 use. Please rest it for 10 min after each 1 hour running. General safety warnings Familiarise yourself with the operation, adjustments and functions. Internalise and follow the safety and operation instructions in order to avoid possible risks and hazards. Contact a qualified person or your dealer if you have questions after reading the instruction manual. Store the instruction manual so that it is accessible for all users. Also relay it when giving the product to others. Do not attempt to modify the product in any way. Only use attachments and accessories recommended by the manufacturer. Use the product only in accordance with this instruction manual. Misuse and incorrect handling will lead to hazards for people and property. Do not use the product if damage is visible. Check the power cord, plug, attached hoses and casing before each use. Faulty products must be repaired or proper disposed of. Disconnect the product from the power supply immediately if the cord or the product supply immediately if the cord or the product is damaged or if a breakdown occurs. Have the product repaired only by a qualified specialist. Improper repairs can lead to electric shocks or other accidents. Pull the plug rather than the power cord to disconnect the product from the power supply. Do not let the power cord hang over edges, do not squeeze or bend it. Use extensions cords that correspond with the technical requirements of this product if using an extension cord in unavoidable. When operating products outdoors, use an extension cord suitable for outdoor use.

5 13500 yywxx Manufacturing date code:year of manufacturing (20yy) and week of manufacturing (Wxx) 7 8

6 750 W l/h max. 8 m max. 7 m approx. 5.9 kg Ø 25 mm (outter thread) for connector Ø 38 mm (outter thread) for adaptor

7 upper Fasten a rope (not provided) to the handle (1) and submerge the product carefully into the water reservoir (Fig.4) Lift the pump by a rope(not provided) from the water reservoir after use. WARNING: Do not lift the pump by power cord.

8

9 750 TTB582PMP 7 10 NOTE: Make sure the cable length is not less than 50mm between float switch and clip.

10 NOTE: This product can be used to suck up water with a lower height (90mm: depending on the pump) but must be manually operated the float.

11

12

13

14 Submersible Pump TTB582PMP The Low Voltage Directive 2006/95/EC(until 19/04/2016) and 2014/35/EU (from 20/04/2016) EN :2012+A11:2014 The EMC Directive 2004/108/EC (until 19/04/2016) and 2014/30/EU (from 20/04/2016) Date: 08/01/2016 Submersible Pump TTB582PMP