General instructions for cleaning and care. Hard xylolite surfacing. cleaning system with treatment object date end of construction address customer

Size: px

Start display at page:

Download "General instructions for cleaning and care. Hard xylolite surfacing. cleaning system with treatment object date end of construction address customer"

Felicia Byrd
5 years ago
Views:

1 no. cleaning system with treatment object date end of construction work process: select one work stage from each number 4 4 dry vacuum cleaning vacuum cleaning without maintenance care product (if coating follows) wet scrubbing and wet vacuuming room classification representative Dust roller nozzle Twinvac / Neverclog filter without ring Duovac / Filter bag with ring Silento / Speedmatic Twister Turbo Sweep Ecofloor % Micro-Mop Top/ Socar / Drewell V Reshine - 5% Microsol mop/ V Antiwax forte - 5% Ecofloor % Microsol fibre pad/ Duomatic / Laser V Reshine - 5% Pad red/ Mambo / Samba V Antiwax forte - 5% V Pad blue/ Sprinter / imatic Reshine - 5% Microsol fibre pad/ Monomatic LS / Antiwax forte - 5% Pad red/ Watertank V Pad blue/ Duovac / cleaning with maintenance care (first protective treatment with same product as in maintenance cleaning) Redur % Flat mop/ Socar / Drewell F Brill - 5% Micro-Mop Top/ Redur % Microsol fibre pad/ Duomatic / Laser F Brill - 5% Pad red/ Mambo / Samba care - 5% Sprinter / imatic heavily soiled large areas: Brill should be used with flat mop only APA /

2 no. maintenance cleaning object date dry vacuum cleaning vacuum chewing gum removal cleaning without maintenance spray mopping cleaning with maintenance Karpfrost 00% Karpotek Speedmatic Twister Turbo Sweep Ecofloor % Micro-Mop Top/ Wetbox system V Reshine - % Mop Microbrush/ Socar / Drewell Biosan % Mop Variwet Variwet / B. Varifix Ecofloor % Mop Microbrush/ Variwet / B. Varifix Reshine - % Mop Variwet Libero % Quick Mop/ Ecofloor % Microsol fibre pad/ Duomatic / Laser Reshine - % B Pad red/ Mambo / Samba Libero % V Pad blue/ Sprinter / imatic Redur % Micro-Mop Top/ Wetbox system F Brill - % Mop Microbrush/ Socar / Drewell Mop Variwet Variwet / B. Varifix Redur % Microsol fibre pad/ Duomatic / Laser F Brill - % B Pad red/ Mambo / Samba care - % V Pad blue/ Sprinter / imatic if needed large areas: Brill should be used with flat mop only APA /

3 no. interim cleaning object date dry vacuum cleaning vacuum chewing gum removal cleaning without maintenance in Karpfrost 00% Karpotek Speedmatic Twister Turbo Sweep Reshine - 5% Micro-Mop Top/ Wetbox system G Antiwax forte - 5% Mop Microbrush/ Socar / Drewell if needed large areas: 4 in Reshine - 5% Microsol fibre pad/ Duomatic / Laser G Antiwax forte - 5% B Pad red/ Mambo / Samba V Pad blue/ Sprinter / imatic Biosan % Micro-Mop Top/ Socar / Drewell Mop Microbrush/ Wetcar / Drewell Mop Variwet Variwet / B. Varifix if needed, bad smell could be removed with important: For initial cleaning after interim cleaning, see "initial cleaning". APA /

no. basic cleaning object date dry vacuum cleaning chewing gum removal cleaning without maintenance 4 rinsing #NV 5 wet scrubbing and wet vacuuming in Karpfrost 00% Karpotek B Relino 0-50% Microsol

4 no. basic cleaning object date dry vacuum cleaning chewing gum removal cleaning without maintenance 4 rinsing #NV 5 wet scrubbing and wet vacuuming in Karpfrost 00% Karpotek B Relino 0-50% Microsol fibre pad/ Monomatic I / G Rewit % B Pad blue/ Watertank Antiwax forte 0-50% V Pad green/ Duovac / B Relino 0-50% Microsol fibre pad/ Duomatic / Laser G Rewit % B Pad blue/ Mambo / Samba Antiwax forte 0-50% V Pad green/ Sprinter / imatic pure water Microsol fibre pad/ Monomatic I / Pad blue/ Duovac / Duomatic / Laser Biosan % Micro-Mop Top/ Socar / Drewell Mop Microbrush/ Wetcar / Drewell Mop Variwet Variwet / B. Varifix if needed if needed, bad smell could be removed with important: change pad often green and black pad on hard stone only Use a coin or a key to do a scratch test, to check if all the protective coating has been removed. When white abrasion occurs, carry out a full clean to remove all the protective coating For initial cleaning after basic cleaning, see "initial cleaning". APA 4/

5 no. protective treatment object date dry vacuum cleaning pore filling (only if necessary) F Porosol 00% Cover for Florfix Florfix/ If necessary, one pore filling Flat mop/ Drewell/ Multi squeegee/ layer on porous surface coating Stoner 00% Cover for Florfix Florfix/ coating Mepol HM 00% Flat mop/ Drewell/ - thin layers Mepol H 00% Buket plast l coating impregnation F Imprasol 00% Cover for Florfix Florfix/ apply first layer Flat mop/ Drewell/ with care Buket plast l important: before protective treatment: the floor must be perfectly stripped, thoroughly rinsed and completely dry! Let dry protection treatment completely between the layers and before use do not coat impregnated floors Process treatement of protection: see descriptione of method For initial cleaning with maintenance cleaner after protective treatment, see "initial cleaning". APA 5/

no. Information about the flooring Wetrok AG cannot accept any liability for damages due to improper use. For security information, see the safety data sheet at www.wetrok.ch.

The product data sheet describes the product and gives information about its application, storage. See www.wetrok.

instructions are recommendations and suggestions and apply to floorings in object quality. Magnesite is sensitive to acids and lyes. Use a special basic linoleum cleaner!

6 no. Information about the flooring Wetrok AG cannot accept any liability for damages due to improper use. For security information, see the safety data sheet at Wear protection: gloves, safety goggles, work clothes Follow the information and remarks on the label, product data sheet and material safety data sheet. The product data sheet describes the product and gives information about its application, storage. See The recommended colours of pad and brushes consist to the actual wwetrok product range Follow the special cleaning and care instructions of the floor manufacturer The cleaning and care instructions are recommendations and suggestions and apply to floorings in object quality. Magnesite is sensitive to acids and lyes. Use a special basic linoleum cleaner! Magnesite is sensitive to permanent exposure to moisture and must not be wet mopped for the first two weeks after installation. Magnesite is resistant to fats and oils. Magnesite (stone wood, wood cement) is manufactured from magnesia, quartz powder, wood flour, fillers and oxides. Magnesite is an industrial flooring for medium to heavy loads: resistant to wear and highly resistant to pressure. Magnesite coverings are cast without joints or with expansion joints, or hand finished, or laid in slabs. Distinguishing feature: acid assay: apply a little sanitary cleaner to the magnesite covering. Immediately foams up: material damage! Cleaning agents and surface treatments may alter the appearance and properties of a floor's surface. Cleaning agents and surface treatments may alter the appearance and properties of a floor's surface. Test on an inconspicuous spot to find which product is suitable for your requirements. Test beforehand on an inconspicuous spot to see if the cleaning agent or surface treatment damages the floor. Dirt-trapping zones, incl. dirt-trapping mats (Wetrok Gardamat) in the entrance, at least 7m long, greatly reduce the amount of dirt tracked into the building. If you have any questions, please don't hesitate to contact us. For training courses, contact the Wetrok Academy, tel. +4 (0) or academy@wetrok.ch. Wetrok AG Steinackerstrasse 6, CH-80 Kloten,Tel +4 (0) , info@wetrok.ch, APA 6/

General instructions for cleaning and care. Hard concrete, untreated (smooth)

General instructions for cleaning and care. Hard concrete, untreated (smooth) cleaning system with treatment object date end of construction work process: select one work stage from each number dry vacuum cleaning 4 vacuum cleaning without maintenance care product (if coating follows)