V Reshine 3-5% Scrubbing brush washbeton/ Mambo / Samba

Transcription

1 no.5 cleaning system without treatment object date end of construction work process: select one work stage from each number vacuum room classification representative Dust roller nozzle Twinvac / Neverclog filter without ring Duovac / Filter bag with ring Silento / Carpet set - Twister Speedmatic Twister Ecofloor % Micro-Mop Top/ Socar / Drewell V Reshine - 5% Flat mop/ V Antiwax forte - 5% Ecofloor % Microsol fibre pad/ Duomatic / Laser V Reshine - 5% Scrubbing brush washbeton/ Mambo / Samba V Antiwax forte - 5% Reshine - 5% Microsol fibre pad/ Monomatic I / wet scrubbing and Antiwax forte - 5% Scrubbing brush washbeton/ Watertank wet vacuuming V Rewit 000-5% Scrubbing brush PP/ Duovac / cleaning with maintenance care (first protective treatment with same product as in maintenance cleaning) Redur % Flat mop/ Socar / Drewell Micro-Mop Top/ Redur % Microsol fibre pad/ Duomatic / Laser Scrubbing brush washbeton/ Mambo / Samba heavily soiled APA 5 /

2 no.5 maintenance cleaning object date V Dust roller nozzle Monovac / vacuum Kerwit / cleaning with maintenance Ecofloor % Micro-Mop Top/ Wetbox system Reshine - % Mop Microbrush/ Socar / Drewell Alcosal - % Mop Variwet Variwet / B. Varifix Ecofloor % Microsol fibre pad/ Duomatic / Laser Reshine - % Scrubbing brush washbeton/ Mambo / Samba Libero % Redur % Flat mop/ Wetbox system Micro-Mop Top/ Socar / Drewell Mop Microbrush/ Variwet / B. Varifix Redur % Microsol fibre pad/ Duomatic / Laser Scrubbing brush washbeton/ Mambo / Samba APA 5 /

3 no.5 interim cleaning object date V Dust roller nozzle Monovac / vacuum in in Speedmatic Twister Reshine - 5% Micro-Mop Top/ Wetbox system Polex - 4% Mop Microbrush/ Socar / Drewell G Antiwax forte - 5% Flat mop/ Reshine - 5% Microsol fibre pad/ Duomatic / Laser Polex - 4% Scrubbing brush washbeton/ Mambo / Samba G Antiwax forte - 5% important: For initial cleaning after interim cleaning, see "initial cleaning". APA 5 /

4 no.5 basic cleaning object date Dust roller nozzle Monovac / damp vacuuming pure water Microsol fibre pad for edges Calorvac 4 rinsing #NV wet scrubbing and wet vacuuming in Antiwax forte 0-50% Microsol fibre pad/ Monomatic I / Antiwax 0-0% Scrubbing brush washbeton/ Watertank Scrubbing brush PP/ Duovac / Antiwax forte 0-50% Microsol fibre pad/ Duomatic / Laser Antiwax 0-0% Scrubbing brush washbeton/ Mambo / Samba pure water Microsol fibre pad/ Monomatic I / Scrubbing brush washbeton/ Duovac / Scrubbing brush PP/ Duomatic / Laser important: For initial cleaning after basic cleaning, see "initial cleaning". APA 5 4/

5 no.5 Information about the flooring Wetrok AG cannot accept any liability for damages due to improper use. For security information, see the safety data sheet at Wear protection: gloves, safety goggles, work clothes Follow the information and remarks on the label, product data sheet and material safety data sheet. The product data sheet describes the product and gives information about its application, storage. See The recommended colours of pad and brushes consist to the actual wwetrok product range Follow the special cleaning and care instructions of the floor manufacturer The cleaning and care instructions are recommendations and suggestions and apply to floorings in object quality. Do not coat structured floor coverings. Synthetic resin coverings are sensitive to organic solvents such as cetone. Do not use solvent-based wax. Danger of slipping! Do not use maintenance and protection products in wet areas. Danger of slipping! Synthetic resin coverings consist of epoxy, polyurethane, polyester or acrylic resins, fillers and oxides. Fillers, such as ground quartz, silica sand and corundum, increase the filling power of the coating compound and provide greater abrasion resistance. Industrial coverings treated with synthetic resins are non-porous, pressure-resistant, mechanically loaded floor coverings with a mat or a gloss surface. Industrial coverings treated with synthetic resins are cast or ground without joints or with expansion joints. Remove loose dirt before every cleaning, damp mop smooth floors and vacuum structured floors. Cleaning agents and surface treatments may alter the appearance and properties of a floor's surface. Test on an inconspicuous spot to find which product is suitable for your requirements. Test beforehand on an inconspicuous spot to see if the cleaning agent or surface treatment damages the floor. Dirt-trapping zones, incl. dirt-trapping mats (Wetrok Gardamat) in the entrance, at least 7m long, greatly reduce the amount of dirt tracked into the building. If you have any questions, please don't hesitate to contact us. For training courses, contact the Wetrok Academy, tel. +4 (0) or academy@wetrok.ch. Wetrok AG Steinackerstrasse 6, CH-80 Kloten,Tel +4 (0) , info@wetrok.ch, APA 5 5/