MAKING GREEN WORK. The perfect solution to every requirement: Natural, organic parts washing. bio-chem.de bio-circle.de. VOC free!

Transcription

1 MAKING GREEN WORK BIO-CIRCLE System Bio-Circle Surface Technology GmbH BIO-CIRCLE komb Fly EN Subject to technical alterations. Any liability for misprints excluded. All texts and illustrations contained herein are copyrighted. VOC free! The perfect solution to every requirement: Natural, organic parts washing bio-chem.de bio-circle.de

2 2 BIO-CIRCLE The trendsetting parts-washing system designed by bio-chem. The BIO-CIRCLE is comfortable to use and ecofriendly, and it offers the optimal solution to any cleaning requirement. It is easy to use; even heavily contaminated parts are cleaned in a fast, secure and eco-friendly way; the VOC free liquid has a very long lifetime; the BIO-CIRCLE cost-effectiveness cannot be beaten. The BIO-CIRCLE runs without solvents and helps you meet the high requirements of the currently effective solvent regulation* (Germany: 31. BImSchV [31st Federal Immission Control Regulation], Austria: VOC-Anlagen-Verordnung [VOC Plant Regulation] VAV). Replace your cold cleaner parts washer with the BIO-CIRCLE and make an active contribution towards increasing occupational safety for your staff, and towards protecting the environment. Environmental protection and quality Conscious that we bear responsibility for the environment, as long ago as 1996 we implemented a fully integrated environmental management system, which was certified by LRQA in accordance with the globally valid DIN ISO standard. As an ecologically oriented enterprise we not only attach greatest importance to optimum product performance but also to optimum environmental compatibility. The certification attests that we deal sensibly with resources, with raw materials for the production as well as with energy and water, and that we also handle waste responsibly. In our opinion, voluntary participation in this environmental management system is the right way towards continuous improvement of environmental protection, says Birgit Große, GM Germany. For documentations, certificates, application examples, and videos please refer to our web page We will be happy to provide you with the documents required also by post, fax or . * The solvent regulation governs the requirements concerning surface cleaning devices. The operators of such devices have to give proof of their observing the established VOC emission limit values because solvent fumes are hazardous to health and pollutive, and they carry a fire- and explosion hazard.

3 33 BIO-CIRCLE Mini BIO-CIRCLE Compact BIO-CIRCLE Maxi Parts washing is supposed to be simple and safe. What matters here are reliable aides. BIO-CIRCLE offers an extensive range of parts washing devices that meet even the highest requirements on ease of use, reliability, and suitability for daily use. The advantages: ergonomic, user-friendly design sturdy, robust device made from synthetic material (PE), no risk of corrosion VOC free! triple filter system: coarse filter, fine filter, magnet particularly maintenance-friendly the control box contains the entire control- and pump system, and can be exchanged easily and fast in case of malfunctions. Furthermore the electricity is splash-proof. the tank is double-walled which affects as isolation. Loss of heat is reduced. You re welcome to benefit from our long experience in the field of natural, biological parts washing. Our trained staff will be happy to assist you competently with their specialist knowledge. Telephone: +49 (0)

4 4 BIO-CIRCLE Maxi The sturdy one The BIO-CIRCLE Maxi is a high-performance, sturdy and durable parts washer. It scores with its ease of use and high payload. large effective surface, plenty of space even for cumbersome parts that can be cleaned perfectly with the long hose on the brush easy handling with push-button switch the hinged upper section with its gas spring guarantees easy servicing, maintenance and repair lid (optional feature) protects from contamination Compact The compact one The BIO-CIRCLE Compact impresses with its high-performance functions, and its compact design saves space in the plant. ideally suited for small rooms or confined spaces the draining device makes the exchange of the BIO-CIRCLE Liquid easier maintenance-friendly due to its hinged upper section the three-filter system and an additional fine mesh filter increase the effectiveness of the BIO-CIRCLE cleaning media. We have been conferred the 2007 Innovation Award Environmental Technology by the Initiative Mittelstand.

5 55 Mini The flexible one The BIO-CIRCLE Mini makes you mobile and flexible, and you can work comfortably in changing locations. tried and tested reliable parts washing system in a flexible design integrated trolley with two stationary and two steering castors manoeuvrable and easy to push, can be utilized quickly in changing locations maximum filling capacity: 80 L BIO-CIRCLE Mini BIO-CIRCLE Compact BIO-CIRCLE Maxi Work surface (W x D) 610 x 500 mm 740 x 540 mm 880 x 580 mm Payload 90 kg 100 kg 220 kg Working height 1010/820 mm 1040/900 mm 960/820 mm Operating temperature C, Factory-set C, Factory-set C, Factory-set at approx. 41 C at approx. 41 C at approx. 41 C Heating approx. 700 W approx. 700 W approx. 700 W Pump 40 W 40 W 40 W Optimum filling quantity 80 litres 90 litres 100 litres Material LDPE LDPE LDPE Empty weight approx. 40 kg approx. 45 kg approx. 60 kg Power supply 230 V, 50 Hz 230 V, 50 Hz 230 V, 50 Hz Order number G70026 G50026 G60026

6 6 BIO-CIRCLE Turbo 2 in 1 automatic and manual cleaning The BIO-CIRCLE Turbo stainless steel the effective combination of fully automated and manual cleaning. A maintenance-friendly high-pressure spray system in combination with the bioremedial cleaning medium BIO-CIRCLE L Turbo provides for thorough cleaning and degreasing of work pieces. With its powered rotating rack and the high spray pressure of 4 bars BIO-CIRCLE L Turbo has an optimal effect on the items to be cleaned. For fast and precise manual cleaning the brush or the nozzle can be used instead of automatic cleaning. sturdy V2A stainless steel design with a payload of 350 kg, heatable, factory-set at 50 C robust stainless steel basket with mechanical rotation, momentary switch for rotating the basket in idle state for easy loading/unloading and manual cleaning a circuit breaker prevents the pump motor from running while the lid is open safe handling guaranteed We have been conferred the 2008 Industrial Award Environmental Technology by the Initiative Mittelstand. ergonomic hand spray gun with quick release fastener for cleaning brush and variable cleaning nozzle (generates a precision jet removes contaminations from inaccessible spots, or an area jet cleans smooth surfaces) fast drying possible by means of a pneumatic spray gun tank with slightly tilted bottom for faster emptying, tank cover with filter elements beneath the basket, with dry running protection a time switch controls the duration of the automatic cleaning and provides optimal ease of use BIO-CIRCLE Turbo: 2 in 1 automatic and manual cleaning

7 77 BC Turbo 800 BC Turbo 1000 BC Turbo 1200 Overall width (mm) x Depth (mm) 1060 x x x 1575 Height, lid closed (mm) Height, lid open (mm) Internal diameter basket (mm) Height basket (mm) Hight max. pag (mm) Payload (kg) Empty weight (kg) Electric outlet (kw) 5,5 8,5 12 Power supply (V/Hz) 400 / / / 50 Spray pressure (bar) 2,5 / 4,8 4 / 12 4 / 12 Heater output (kw) 4,5 6 9 Tank capacity (L) Air supply (bar) max. 6 max. 6 max. 6 Tested in accordance with CE CE CE Order number G40027 G42027 G43027 Stainless steel top piece for BIO-CIRCLE The convincing features of the stainless steel top piece for the BIO-CIRCLE are its large work surface and high payload (up to 500 kg). It is ideally suited for the cleaning of big and heavy parts. particularly large work surface (1500 x 950 mm) that can be used by two operators at the same time conical drain with a 600 μm sieve filter easy loading possible by means of a crane PE grids (optional) for protection maximum load without base frame 250 kg, maximum load with base frame (square tube frame) 500 kg

8 8 BIO-CIRCLE Liquid NEW: Four high-performance BIO-CIRCLE Liquids guarantee optimum results in parts washing. + Dermatologically tested! The new BIO-CIRCLE Liquid range the right solution for any application! The BIO-CIRCLE Liquids are specialists in clean solutions. They stand out for their fast and thorough cleaning performance. The natural micro-organisms they contain degrade the oil ingressed and guarantee long durability and a long serviceable life with a constantly high cleaning performance. The aqueous BIO-CIRCLE Liquids do not contain any solvents, thus avoiding VOC emissions, and meet the requirements of the solvent directive. They do not require placarding/labelling under the Ordinance on Hazardous Substances and EU Directive, and are therefore easy and safe to use, store, and transport. We will be happy to advise you on which BIO-CIRCLE Liquid is the right one for you. We give competent advice and valuable tips on technically correct parts washing. VOC free! natural The BIO-CIRCLE benefits from the powers of nature in order to provide for user-friendly, ecofriendly, and economical parts washing. They clean without any solvents or cold cleaners, thus protecting the employee and the environment from highly volatile vapours. The ph-adjusted cleaning medium BIO-CIRCLE L dissolves processing oils, cutting coolants, anti-corrosion products, light greases and similar contaminations as well as particle contaminations from the parts. The easy-to-clean filter system separates coarse and fine contaminations, and the natural micro-organisms biodegrade the greases and oils, thus maintaining the cleaning performance. simple The BIO-CIRCLE Liquids are ready for use, which eliminates the risk of incorrect dilution and variations in quality, and the necessity of regular bath analyses. The aqueous BIO-CIRCLE Liquids do not pit the surfaces; all materials from plastics to steel can be cleaned. profitable BIO-CIRCLE Liquid features a bath lifetime that is up to four times as long as with cold cleaners. Even with a higher contamination input a constantly good cleaning result is achieved. BIO-CIRCLE Liquid means no hazard to humans and the environment, paired with high efficiency and cost effectiveness. * The used micro-organism are non-pathogen bacteria of group 1 acc. to Directive 2000/54/EC. (Group 1 means that it is unlikely to cause human disease).

9 99 BIO-CIRCLE Liquid Optimized formula! BIO-CIRCLE Liquid Ultra Optimized formula! optimally adjusted to everyday soiling compatible with oil separators tested in accordance with ÖNORM B5105 fresh scent also neutralizes unpleasant smells caused by ingress of soiling special corrosion inhibitors guarantee temporary protection after cleaning NSF certified improved skin protection through panthenol skin-friendliness has been dermatologically tested surfactants on the basis of renewable resource removes even heavy oils and greases improved cleaning performance especially for tenacious soiling also suited for removing bitumen and corrosion-preventive waxes fresh scent also neutralizes unpleasant smells caused by ingress of soiling special corrosion inhibitors guarantee temporary protection after cleaning A L jerrycan A L drum A L IBC A L jerrycan A L drum A L IBC BIO-CIRCLE Liquid Turbo BIO-CIRCLE Liquid Alu low foaming for mechanical cleaning in the BIO-CIRCLE Turbo for temperatures of up to 50 C with corrosion protection A L jerrycan A L drum A L IBC for the cleaning of sensitive materials, such as aluminium virtually residue-free without scent can be added as required NSF certification pending surfactants on the basis of renewable resources A L jerrycan A L drum A L IBC CLEANING CONSISTENCY

10 10 BIO-CIRCLE BIO-CIRCLE accessories BIO-CIRCLE general Brushes (flooded with cleaning agent solution) G28526 Washing brush, angled Supports cleaning in angular and hard-to-reach corners. G20726 Washing brush Supports cleaning G27326 Washing brush with soft bristles (nylon 0.3 mm) With this washing brush sensitive parts can be cleaned without harming the material. Tube cleaning nozzles (Application in all BIO-CIRCLE units) For uniform wetting, rinsing, and cleaning of interior tube surfaces. G21226 approx. 600 mm with hose attachment G21326 approx. 600 mm with quick-action coupling G21426 approx. 800 mm with brush head and hose attachment G21526 approx. 800 mm with brush head and quick-action coupling Hose Pumps BC pump for 230 V G29126 Liquid hose for BIO-CIRCLE, sold by the metre, 8 mm interior The feed line to the washing brush can be extended for big parts. Filters Inserts for filter casings (nylon filter, washable; Wound cartridge filter, non-washable) G22026 Nylon filter support core Holds the replaceable nylon filter G28326 Nylon filter 100 μm, blue G28726 Nylon filter 150 μm, brown G28426 Nylon filter 200 μm, green G21926 Nylon filter 350 μm, grey G22726 Wound cartridge filter 100 μm Trading unit: 6 pieces G22826 Wound cartridge filter 200 μm Trading unit: 6 pieces Foot switch For comfortable and easy handling. The washing process is initiated by means of a foot switch. G26126 Foot switch (electro-pneumatic) G29826 Pump with increased flow rate. Recommended with extended liquid hose. 170 W G27926 Pump for acidic media With this pump and an acidic cleaner (e.g. bio-chem Power Cleaner) in the BIO-CIRCLE you can derust and/or descale parts, or remove other mineral contaminations from the parts. 45 W Filter accessories For Mini, Compact and Maxi. G54126 Opening key for filter casings Filter bags The filter bags are fastened under the basin discharge by means of a bracket. G54626 Filter bag nylon 50 µm washable G54726 Filter bag nylon 100 µm washable G54426 Filter bag polypropylene needle felting 5 µm G54526 Filter bag polypropylene needle felting 25 µm G54826 Add-on bracket for filter bags on Compact and Maxi, with 3 screws Floating spheres (polypropylene) To reduce evaporation losses They are afloat on the cleaner surface. G g in a 10 L pail

11 11 BIO-CIRCLE Mini BIO-CIRCLE Compact Lid Protects from pollution and reduces evaporation of the cleaning liquid. G for Mini Lid Protects from pollution and reduces evaporation of the cleaning liquid. G55B028 for Compact Inox protection grid Made from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts. G70326 for Mini Inox protection grid Made from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts. G53226 for Compact BIO-CIRCLE Maxi Lid Protects from pollution and reduces evaporation of the cleaning liquid. G for Maxi Inox protection grid Made from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts. G60226 for Maxi Trolley BIO-CIRCLE Turbo The sturdy trolley makes the device mobile and hence versatile. G53126 for Compact galvanized (W 766 x D 522 x H 140 mm) Gloves G42207 Gloves size 11 Trolley The sturdy trolley makes the device mobile and hence versatile. G60326 for Maxi galvanized (W 1000 x D 1000 x H 200 mm) Advice: The corrosion protection provided does not meet the requirements of your application? The bio-chem corrosion protection for aqueous systems is the solution. It can be added to the BIO-CIRCLE parts washers at any time. Contains 100 % active ingredients Very economical a low application concentration is sufficient Nitrite-free Corrosion protection for aqueous systems A ml plastic bottle Packaging unit: 12 x 1000 ml (1 cardboard box) A L jerrycan A L jerrycan A L drum

12 12 BIO-CIRCLE White Biotechnology squares human economic management with the natural cycles of materials. There are plenty of products the application of which helps improve our quality of life. The BIO-CIRCLE is a representative example of the success story of White Biotechnology. Our BIO-CIRCLE systems distinguish themselves for the following: Comparison between a conventional parts cleaner with cold cleaner and BIO-CIRCLE What happens in case of increased pollution input? What contaminations can be removed? Organic, unpolar (greases, oils) Inorganic, polar (salts) Inorganic, unpolar (chippings, dust) What materials can be cleaned? Stainless steel Steel Aluminium Non-ferrous metals Occupational safety and health Parts cleaner with cold cleaner Saturation of the rinsing solution Deterioration of cleaning performance Modest Modest BIO-CIRCLE BIO-CIRCLE L Results remain the same over the entire period Good excellent cleaning performance thanks to an optimum combination of mechanics, temperature, chemistry and nature Impairments to health (Source: Gefahrstoffe Kaltreiniger, M043, 02/2007, BG Chemie)) Parts cleaner with cold cleaner BIO-CIRCLE BIO-CIRCLE L no solvents, no cold cleaners no fire hazard aqueous cleaning medium no hazardous substance, no hazardous material, hence no special regulations regarding storage, handling, and transportation cleaned parts are protected from corrosion long service life because of biological oil degradation Nerve damage Skin damage Liver damage Kidney damage Blood cell damage Mutagenic and fecundity-endangering effects Carcinogenic effects Toluene, xylene, trichloroethylene, n-hexane, petroleum ethers (hexanal isomers, pentane, heptane, octane) Yes Methylene chloride, trichloroethylene, toluene, xylene, methanol, ethanol Trichloroethylene, petroleum, fuel mixtures, hexane, heptane, toluene, xylene, alcohols Toluene, benzene Organic solvents Benzene BIO-CIRCLE on the road We put the BIO-CIRCLE parts cleaner into motion and it comes directly to your door. Get an idea on site and assure yourself of the functionality, and its excellent cleaning performance paired with best possible user- and environmental protection. Examine the high-quality workmanship and optimized ease of use, and compare your demands on a parts cleaner with integrated brush to the BIO-CIRCLE system. Experience the BIO-CIRCLE at first hand during an application test on your premises. Rent-a-BIO-CIRCLE? You can also rent BIO-CIRCLE. For more detailed information on renting conditions please call the number below. Are you interested? We ll be happy to make an appointment with you. Telephone: +49 (0) service@bio-circle.de Bio-Circle Surface Technology GmbH Bio-Circle Surface Technology GmbH Berensweg 200 D Gütersloh Telefon: +49 (0) Telefax: +49 (0) service@bio-circle.de