User Manual (US edition) TL 1301 Waffle Iron

Transcription

1 User Manual (US edition) TL 1301 Waffle Iron Version 2.1 MAJ 2014

2 Indholdsfortegnelse Indholdsfortegnelse Introduction Generally Manufacturer Machine plate Overwiew and application The purpose og the waffle iron and intended use Technical specifikations and consumption Operator workplace location and layout Operation Baking of a waffle Operation of timer Adjustment of temperature Maintenance and repair Cleaning and order Removing of heat shield Repair Disassembling the pans Assembly of pans Specifikation af spare parts El-diagram Destruction Annex Labels, symbols and pictograms EC declaration of conformity

3 1. Introduction Original manual This manual is FKI Fast Food Teknik A/S translation to the original instructions for TL 1301 Waffle Iron, hereinafter called the waffle iron. Purpose The purpose of this manual is to ensure proper installation, use, handling and maintenance of hamburger machine. Accessibility The instructions must be kept in a known place for staff where it is easily accessible to operators and maintenance personnel. Knowledge It is the employer's (owner of the waffle iron) obligation to ensure that all who serve, maintain or repair the waffle iron, read the instructions, at least those parts of it that are relevant to their work. Additionally, all who serve, maintain or repair the Hamburger machine, must themselves seek information in the instructions. 2. Generally 2.1. Manufacturer The Hamburger machine is manufactured by Company name: Adress: FKI Fast Food Teknik A/S Byghøjvej 5, Verninge 5690 Tommerup Name of the waffle iron: The full name of the waffle iron is TL Machine plate Machine plate is placed in the back on the left side. 3

4 3. Overwiew and application 3.1. The purpose og the waffle iron and intended use Waffle Iron TL 1301 is intended for baking waffles with liquid batter Technical specifikations and consumption Overall dimension Height x width x depth: 230 x 255 x 405 mm Weight: 10 kg Elektricity Connection Power: 115 V AC Connection frequenzy: 50/60 Hz Current absorbed: 12.5 A Power absorbed: 1500 W Noise Airborne noise coming from the waffle iron: Measured sound pressure level db(a): < Operator workplace location and layout The waffle iron is intended for placement on a table in proper working height, and is operated from the front. The waffle iron shall be connected to a 115 V power switch with the plug. The Waffle iron connection must be grounded. 4

5 4. Operation The waffle iron are switched on the red switch on the front, then heating to about 205 C is initiated. This takes approximately minutes, after which the appliance is ready for use. The top must be closed during heating Baking of a waffle 1. Open the waffle iron and pour a portion of waffle baking mix (use special spoon) on the lower pan. 2. Close the waffle iron and start the timer. The timer is fixed at 2 ½ minutes. 3. When the alarm sounds, open the waffle iron and the baked waffle removed with plastic or wood tool. (Never use metal tools or objects on the Teflon coated pans). 4. Wipe pans for residues of sugar and fat, before the next portion of baking mix is introduced. 5. Next waffle repeat steps Operation of timer Waffle iron is equipped with a fixed timer of 2½ minutes. The timer is provided with a pushbutton ON / OFF. By pressing the button, a LED light, indicates that the countdown is going on. At the expiry of the time an alarm sounds. The alarm is stopped by pressing the ON / OFF. The timer is started at the same time again by pressing ON / OFF. 5

6 4.3. Adjustment of temperature The waffle iron is provided with an analog thermostat, positioned at the rear of the left side, which is adjustable between C. The temperature is adjusted by turning the thermostat to suit 2½ minutes timer. The temperature is raised by rotating clockwise and lowered by rotating counterclockwise. 6

7 5. Maintenance and repair 5.1. Cleaning and order During use, it is important to wipe the pans every time a waffle has been baked. Wiping can be done with cloth or tissue paper. This must be done to avoid burning of sugar residues in the teflon surface. The waffle irons waste tablet is emptied as needed for waste and residues, otherwise these will burn themselves onto the surface. Daily cleaning is carried out when the appliance has cooled. The waste tablet is emptied of bread debris and washed with a damp cloth or in the dishwasher. The waffle iron is cleaned by wiping with a damp cloth exterior. The pans are washed with warm water, possibly with a mild cleaning detergent, by using a brush.. Never use sharp tools on the pans 5.2. Removing of heat shield The heat shield of the waffle iron can be removed for cleaning. Lift up the heat shield from the snap locks. The shield can be washed in the dishwasher Repair Repair of the waffle iron should only be carried out by authorized personnel. Always check that the power cable is removed from the power switch, before opening the cabinet.the front switch does not turn off the power inside the appliance. 7

8 5.4. Disassembling the pans The teflon coated pans can be disassembled for cleaning or replacement by use of the tool on the back of the appliance. 1. The 4 screws are loosened and pulled out. The pans is lifted from the cabinet and carefully turned over. 2. The 2 wing nuts are removed. 3. The tightening plate are removed and the heat elements and heat sensor can be removed. 8

9 4. The can hereafter be cleaned in a dishwasher or replaced. 9

10 5.5. Assembly of pans 1. Heat element and sensor (only lower pan) is fitted on the back side of the pan. 2. The tightening plate is fitted on the two tapped pins. 3. The wing nuts is tightned to hold the heat element and sensor. 4. The pan is assemblied in the cabinet. 5. The 4 screws is assemblied using the tool. 10

11 5.6. Specifikation af spare parts 1 7 Pos. Varenummer Antal Overlay for timer Heat element 750 W Benævnelse Thermostat C med capillary tube Timer PCB for waffle iron Trafo V Knob Switch 1-pole red 11

12 5.7. El-diagram Pos. Varenr Antal Benævnelse Power cable 3 x 1,0 mm² Connector Switch 1-pole red Thermostat med capilary tube Connector 2-pole porcelain Heat element 115V 750W Trafo V Timer PCB for waffle iron 12

13 5.8. Destruction The waffle iron is marked with the above recycling symbol. (EC Directive 2002/96/EC) and must be disposed of in accordance with your country order. This means that when the product becomes obsolete, you should dispose of it after the local municipality's rules, for example in unsorted waste stream. 6. Annex 6.1. Labels, symbols and pictograms The waffle iron is marked with the following symbols and pictograms: Recycling symbol in accordance to EC (see part 6) Hot surface use gloves. 13

14 7.1. EC declaration of conformity Fabrikant: EF-overensstemmelseserklæring 2006/42/EF bilag II A Navn Adresse Postnr. og by FKI Fast Food Teknik Byghøjvej 5, Verninge 5690 Tommerup Erklærer hermed at maskine type: - Vaffeljern TL 1301 Er fremstillet i overensstemmelse med følgende EF direktiver: /42/EF Maskindirektivet - under anvendelse af følgende harmoniserede standarder: - EN Elektrisk Materiel på Maskiner - og følgende nationale standarder og tekniske specifikationer: - - Søren Poulsen Direktør Verninge Underskriver Stilling Sted Dato 14

15 15

16 Byghøjvej 5, Verninge DK-5690 Tommerup Danmark Tlf