Free your inner control freak.

Transcription

1 Free your inner control freak. Precise tools for controlling growing environments Autopilot by Hydrofarm is dedicated to delivering high quality environmental controls to indoor gardeners. Autopilot's mission is simple to design and manufacture environmental control instrumentation that is user friendly and durable, incorporates an optimal level of performance, and delivers the lowest cost of ownership possible. Autopilot's focus on excellence through design has resulted in products that are useful throughout the horticulture industry, delivering on the company's promise of quality, performance and value in digital and analog environmental control instrumentation. Explore our family of products and learn how we use technology to interface harmoniously with nature. Hydrofarm.com for more great products Create the optimum low maintenance system Don t sweat the small stuff set up the ultimate system and get it all under control with Autopilot! LIGHTING Controls the light cycle through any 120V ballast with precision. CONTROLLERS NIGHT CYCLES Control the humidity with a humidifier and never worry about nights again. LIGHTING ACCESSORIES Additional output for even more control great with light movers! Autopilot gives digital precision control and a failsafe battery back-up. RECYCLING FUNCTIONS Periodic control with precision for all pumps and CO 2 systems. hydrofarm.com 239

2 GREENHOUSE MASTER CONTROLLER The Autopilot Greenhouse Master Controller (GMC) is designed to precisely control temperature, humidity and CO 2 in the growing area. The GMC s enclosure features four separate power outlets used to connect external devices such as fans, CO 2 injectors, air conditioners, and dehumidifiers. Each external device easily connects to the unit creating a simple and user friendly platform. The GMC s fan-powered remote combination probe features a highly accurate dual beam CO 2 sensor. The remote sensor can be placed up to 15 feet from the controller and has been designed to resist EMI / EFI from electronic ballasts. Each unit has been pre-programmed with factory recommended settings for quick plug and play operation. Autopilot controllers offer grow room guidance. APCECOTH Greenhouse Master Controller $ APCEIC Internet Cable and Software for Greenhouse Master Controller DIGITAL CO2 CONTROLLER FUZZY LOGIC Autopilot's simple to use highly accurate digital CO 2 controller has arrived. Autopilot's digital CO 2 controller measures the carbon dioxide level in the grow room and automatically turns on and off the CO 2 device to accurately keep the carbon dioxide PPM at the desired level. The Autopilot digital CO 2 controller can be selected to operate in Fuzzy Logic mode or standard logic mode (for use with generators). Fuzzy Logic mode will calculate the overshoot and undershoot of CO 2 injection within the room. When used in Fuzzy Logic mode, the built-in microprocessor will apply the calculations to the injection schedule which eliminates the guess work and maintains CO 2 levels efficiently. Standard logic CO 2 controllers will not make these calculations and will continue to inject more and more CO 2 into the room until the controller reaches its set-point. Standard CO 2 injection methods do not allow enough time for the carbon dioxide to mix with the air. Standard logic CO 2 controllers may be fine when using a CO 2 generator which costs very little to operate, but can be costly and inefficient when using bottled CO 2 tanks. The Autopilot Digital CO 2 controller has a 15' remote CO 2 sensor with built in photocell. Controlling CO 2 has never been easier or more affordable. Autopilot's digital CO 2 controller eliminates guesswork while it controls your carbon dioxide level with accuracy and efficiency. Autopilot offers guidance for your growing environment. 15' remote combination probe, CO 2 and light Accurate dual beam CO 2 sensor Adjustable CO 2 Dead-Band Fuzzy Logic mode adjustable (on/off) Built in data logger stores high and low readings for CO 2 PPM APCECOD Digital CO 2 Controller Fuzzy Logic $ ANALOG CO2 CONTROLLER The APCECO offers indoor gardeners an economical and simple method of monitoring and controlling CO 2 within the grow area. It utilizes a highly visible and intuitive LED indicator display to let you know generalized CO 2 levels. The LED indicator will blink to show the PPM level in increments of 100. The 15' remote sensor allows versatile placement within the grow area. APCECO Analog CO 2 Controller $ hydrofarm.com

3 ANALOG ENVIRONMENTAL CONTROLLER Control the temperature and humidity within your growing environment, with adjustable temperature and humidity mode for independent or synchronized control. Night device outlet operates when the lights are off, while the built-in photo cell ensures that your CO 2 device only activates when the lights are on. Coordinates supplemental CO 2 with your ventilation equipment CO 2 outlets are automatically disabled while your ventilation equipment is functioning 15' Remote probe with highly accurate sensor Can increase or decrease humidity to a specified level Resists EMI/EFI from electronic ballasts Reliable and easy to use APCETHA Analog Environmental Controller $ DIGITAL ENVIRONMENTAL CONTROLLER The Autopilot Digital Environmental Controller (DEC) precisely controls temperature and humidity within your grow area. The DEC coordinates the use of supplemental CO 2 injection within the temperature function. The DEC has four outlets and a 15' remote combination probe with highly accurate temperature, humidity and light sensors. Easy to use push button functions are identified on a large digital display. Built-in data logger records minimum and maximum temperature and humidity levels. Combines temperature, humidity and CO 2 controls together in one flexible unit with digital precision Control your temperature and humidity independently or synchronized Day/night temperature set points Remote 15' temperature and humidity sensor Digital recycling timer APCETHD Digital Environmental Controller $ APCEXT 15' Extension Probe Sensor Cable MASTER DIGITAL TIMER Combination Recycling and Lighting Timer The Autopilot Master Digital Timer (MDT) controls lighting and recycling functions in your grow area. The MDT has dual timer functions, a 24-hour time clock for lighting and a recycling timer for pumps or CO 2 injection. The MDT has four outlets. One controls a pump or other recycling device; two are for daytime devices such as lights and light movers; and one is for a night device, which would turn on at night. The MDT features a high temperature shutdown function that detects unsafe high temperatures in the grow room and turns off the HID lights in the event of a ventilation failure. The MDT also features hot start protection to ensure proper lamp cooling before attempting to re-fire. The precise cycle timer can be programmed anywhere between 1 second and 96 hours. Precise digital time clock with battery backup Adjustable high temperature shutdown and hot start prevention Recycling on/off range 1 second to 96 hours 3' remote temperature probe APCTMDT Master Digital Timer $ APCEXT 15' Extension Probe Sensor Cable hydrofarm.com 241

4 ADJUSTABLE RECYCLING TIMER Precise cycle timer with day/night detection Controls any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO 2 injection, turning on and off exhaust fans, misters and more. There is no programming required, it is easy to set and operate. The timer has adjustable ON time of 15 seconds to 5 hours and an OFF time of 15 seconds to 13 Hours. Cycle timing is adjustable for operation during the day, night or 24 hours. Controls 120V pumps, fans and more on a periodic repeat cycle ON duration spans from 15 seconds to 5 hours OFF duration spans from 15 seconds to 13 hours Functions during the day, during the night or 24 hours AUTOPILOT CO 2 MONITOR Developed to detect the presence of CO 2 in ambient air, the Autopilot desktop CO 2 monitor is smart, compact and easy to use. In addition to measuring the CO 2 concentration, APCEM also measures the ambient temperature and the relative humidity. High quality LCD display. Independent CO 2, RH and temperature readings. Calculates and displays ventilation rates. Built-in data logger can store 48 sets of CO 2, temperature and humidity over 24 hours; one log every 30 minutes Min/max mode records the maximum and minimum concentration of CO 2 since the device was last turned on High altitude setting allows you to compensate for specific location with adjustable altitude set-points APCTART Analog 24-Hour Recycling Timer $74.95 APCEM Autopilot CO 2 Monitor $ DAY/NIGHT COOLING THERMOSTAT Controls heating and cooling equipment with both day/night set-points Precise temperature sensor Temperature control differential +/- 3 F Built-in photocell 45 F 95 F control range APCET Day/Night Thermostat $ hydrofarm.com

5 HIGH POWER HID CONTROLLERS Control multiple lights from one time-clock or controller device. Power is wired directly into the outlet timer box, and all of the outlets are controlled by one 120v trigger cable. You can plug the trigger cable into a standard 24-hour timer or environmental controller. All controllers feature premium quality industrial grade relay and durable powder coated steel chassis, plus a 3-year no hassle warranty. 4-OUTLET CONTROLLERS Control up to four lights from one time-clock or controller device. 120/240 volt power is wired directly into the four outlet timer box, and all of the outlets are controlled by one 120 volt trigger cable. All are rated for 30 amps at 120/240 volts. APCL4DX has four 120/240 volt style outlets which allows for running your ballasts at 120/240 volts without having to change out your ballast power cords. APCL4120 has four 120 volt receptacles (Nema 5-15). APCL4240 has four 240 volt receptacles (Nema 6-15). 8-OUTLET CONTROLLERS Control up to eight lights from one time-clock or controller device. 240 volt power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one 120 volt trigger cable. Both are rated for 60 amps at 120/240 volts. APCL8DX has eight 120/240 volt X style receptacles. APCL8240 has eight 240 volt receptacles (Nema 6-15). APCL4120 High Power HID Controller, 4000W $ (120V only) 40A APCL4DX High Power HID Controller, 4000W (120/240V) 40 A X APCL4240 High Power HID Controller, 4000W (240V only) 40 A APCL8DX High Power HID Controller, 8000W $ (120/240V) 50 A APCL8240 High Power HID Controller, 8000W (240V only) 50 A ENVIRONMENTAL & CO2 CONTROLLERS TIMERS THERMOSTATS MONITORS GENERATORS AND MORE hydrofarm.com 243

6 LINK 4 HYDROPONIC CONTROLLER Link4 iponic Controllers are the latest in greenhouse environmental automation. Control and integrate a variety of equipment in your grow room with one easy-to-use system. Great for controlling heating, cooling, humidity, lighting needs and more. Precision controls allow you to improve crop quality, reduce equipment usage and lower energy costs. The iponic 600 gives complete monitoring and control from outside the grow room via optional PC software, smart phone applications and internet connectivity. Better control = Better yields LC power outlets integrated directly into controller Integrated remote combination sensor with 16' cord measures CO 2, temperature, humidity and light Easy-to-use touch screen display Factory presets for instant plug and play operation Customized programming in minutes Integrated high temperature shut off Alarms for high/low temperature, humidity, CO 2 via text message or U.L. and C.U.L. approved 3-year limited warranty 1-year warranty on sensor module Temperature : Range : -40F to 150F Accuracy : +/-0.9F (From 50F to 104F Humidity: Range : 0% to 100% Accuracy : +/-2% from 10% to 90% CO2: Range : 0 to 10,000 PPM Accuracy : +/- (30ppm +5%) Light: Range : 0 to 2000 W/m2 Accuracy : PAR (400nm 750nm) Latest Hydrofarm.com 3 on reflective materials IGS-061 CO 2 CONTROLLER WITH HIGH TEMPERATURE SHUT OFF Easy to install and set up AC adapter mandatory use on newer units CO 2 controller with display and day/night detection Controls your CO 2 tank or gas burner during day only Programming allows to increase or to decrease the CO 2 concentration (only during the lighting period) Displays both CO 2 concentration and temperature NBIGS061 CO2 Smart Controller with High-Temp shut-off $ IGS-110 RH & TEMPERATURE CONTROLLER Precise temperature and RH sensors Day and night set-points Can cool, heat, humidify, dehumidify, or cool and dehumidify Adjustable CO 2 set point from 100 to 4,900 ppm Yearly easy calibration by the user when prompted on display Precise CO 2 sensor: truly ±75 ppm High temperature shut-off function adjustable from 50 to 122 F (10 to 50 C) 120 V, 15 A, 2 HP load capacity NBIGS110 Relative Humidity/Temperature Controller $ NBIGS110S Relative Humdity/Temp Controller w/external Probe IPONIC COMMUNICATION MODULE Control your iponic controller from anywhere in the world. This optional module will enable you to connect your controller to the internet et via an RJ45 connector. Control it from your PC, MAC, smartphone or any internet browser capable device. Log into the Link4 Cloud website and control all the units you own from one place. LC99511 Link 4 Hydroponic Controller $ LC99512 Link 4 iponic Communication Module IGS-220 CO2/RH/ TEMPERATURE Seamless integration of CO 2 enrichment and intake/exhaust ventilation CO 2, relative humidity and temperature precise electronic sensors 24-hour data logging of sensor values Alarm system hook-up (with IMS-100) NBIGS220 CO 2 /RH/Temperature Smart Controller $ NBIGS221 CO 2 /RH/Temp Controller Day/Night Settings hydrofarm.com

7 IGS-100 CO2 SMART CONTROLLER An auxiliary output can be configured to defeat ventilation during a CO 2 enrichment or venting process An additional delay may be set to maintain auxiliary output defeating for an additional 5, 10, 15, or 20 minutes Each output can be set to operate during the day only, the night only, or day and night NBIGS100 CO 2 Auxiliary Smart Controller $ IGS120-ON & IGS120-OFF SWITCHER 15A 120v switches OFF when sense cord is powered Used to inhibit CO 2 dehumidifiers and/ or other equipment while venting is in progress 15A 120V switches ON when sense cord is powered Used to turn equipment on from other power circuit NBIGSILS120OFF 120V - 15A OFF Switcher $89.96 NBIGSILS120ON 120V - 15A ON Switcher IGS-011 CYCLE & IGS-011L CONTROLLER Cycle timer with photocell Day & night operation or day only ON cycles from 1/2 minute to 30 minutes OFF cycles from 1 minute to 12 hours NBIGS011 Precise Cycle Controller without Display $ IGS-021 TEMPERATURE CONTROLLER Temperature controller without display Can be set to heat or cool with day & night set-points NBIGS021 Day/Night Controller without Display $ IGS4 LIGHT LOAD RELAY Safely switch high amperage equipment with low cost timer Incorporated 0 to 20 minutes ON delay Prevent hot bulb start-ups or sequence turn ons to reduce electrical system loading FLIP FLOP BOX CONTROLLERS These controllers allow you to expand your growing area without having to increase power requirements or purchase additional ballasts. All you need is an additional Reflector and lamp for each ballast in your system. Heavy duty aluminum chassis won't rust. Made in the USA. Use 2 or 4 bulbs on one ballast (not simultaneously) Maximize available power by using all 24 hours of the day Run lights in several different staggered configurations Saves energy by using fewer ballasts No need to run additional power circuits Works with magnetic core and digital ballasts Plug and play with most popular lighting systems Piggyback Trigger cable allows daisy chaining additional controllers 5-year hassle-free warranty DS83 NBILS4121, NBILS4121S NBILS4241 NBILS Lights/Load Switcher w/built-in Delay, $ V in, 120V out NBILS4121S 4 Lights/Load Switcher w/built-in Delay, V in, 120V out NBILS Lights/Load Switcher w/built-in Delay, 240V in, 240V out DS84 DS81 Flip Flop Box, 2 In 4 Out $ DS82 Flip Flop Box, 4 In 8 Out DS83 Flip Flop Box, 6 In 12 Out DS84 Flip Flop Box, 8 In 16 Out DS85 Flip Flop Box, 10 In 20 Out DS86 Flip FLop Box, 20 In 40 Out hydrofarm.com 245

8 PLANT PRO W/CO 2 SYSTEM Precision electronic control for all environmental variables. Outlets for lighting, irrigation, ventilation and CO 2. High accuracy sensors for temperature, humidity, CO 2 and flood. Optional photocell (light) sensor available. Sensors have flexible 10' cables (25' total with optional extensions). This allows the Plant Pro to be located for easy monitoring and adjustment, even outside the grow room if desired. The Plant Pro's unique simplified operation allows for easy, quick setup using only two control knobs and a large digital display. One knob to select a setting, a display to show the setting, and a second knob to change the setting. Measurements from sensors can also be displayed. Easy to use digital clock provides exact timing. Separate day and night time temperature control of fan. Vented or sealed room operation of CO 2 and fan, with adjustable fan delay. Control sealed lamp fans. Over temperature emergency shutdown option. Precision timekeeping from power line or internal signal for use with generator or noisy power line. SOLHGC3A Plant Pro w/co 2 System $ LP-120S AND LP-240S TIMERS Easy to use with a single select knob that clicks to any of 16 time settings including an accelerated 18-hour day cycle running ON 6 hours / OFF 12 hours and many others. The Lamp Pro sequences two outlets on, 20 seconds later the next two, and 20 seconds later the final two. This helps prevent electrical problems. Turn off has a 5-second delay. The LP-120S (120v 15A) uses standard 120v type outlets and power cord plug. The LP-240S (240v 30A) has 240v outlets and an 8' power cord with unterminated wires. It can control up to six 1000W lamps. SOLLP120S Lamp Pro Timer (120V 15A, sequential) $ SOLLP240S Lamp Pro Timer (240V 30A, sequential) PWX POWER EXPANDERS Turn on more high powered loads from a timer or environmental controller. By utilizing other outlets (on separate circuit breakers), more lamps can be added and still be controlled by your timer. Includes ready-to-go outlets (120v or 240v depending on model), a 10' trigger cord, and a power cord that plugs into the outlet on the separate circuit breaker. Multiple Power Expanders can be used to control a large number of devices. SOLPWX240S Power Expander (240v 30A, sequential) $ HEAVY DUTY GROUNDED TIMER TM minute on/off Great for lighting, pumps, etc. 15 amp DUAL OUTLET GROUNDED TIMER TM01015D 15 minute on/off 24-hour cycle Controls 2 outlets imultaneously 15 amps 7 DAY DIGITAL TIMER TM minute on/off Up to 8 on/offs per day Excellent for hydro systems 15 amps 7 DAY DUAL OUTLET DIGITAL TIMER TM01715D 1 minute on/off Up to 8 on/offs per day Different days and cycles Controls 2 outlets simultaneously 15 amps 240V HEAVY DUTY TIMER TM amps/2 H.P. and accepts the most common 240v cord (NEMA 6 15P) 2 on/offs per day for 240v lights, fans or other appliances Convenient clamshell packaging HYDROFARM SURGE PROTECTOR Power indicator Surge protector 6 ft. power cord Circuit breaker switch for safety GREAT VALUE! TM Amp, 24 Hr, Grounded $13.95 Timer TM01015D Dual Outlet Grounded Timer TM Day Digital Timer TM01715D 7 Day Dual Outlet Digital Timer TM Amp, 3750W, 240V Timer TMSP8 Hydrofarm Surge Protector hydrofarm.com

9 MECHANICAL HEAVY DUTY TIMER Heavy duty 24-hour mechanical timer features a weatherproof plastic box. Easy-toread and set 24-hour dial AM/PM. For all indoor and outdoor applications VAC, 40A, 60Hz Captive trippers can t be lost Resistive or tungsten Ground lug termination UL and CSA listed Large screw terminals for easy wiring #8 DPST model switching AWG INDOOR-OUTDOOR THERMOMETER The large display shows current temperature and humidity levels, and includes a remote probe for second zone temperature. Records high and low points for both temperature and humidity. HGIOHT Active Air In-Out Thermometer w/ $19.95 Hygrometer TMHDP104 Mechanical Heavy Duty Timer $82.95 INTERMATIC HEAVY DUTY TIMER New from Intermatic, this convenient, efficient 7-day outdoor timer offers: 40 amp rating Multi-voltage: 120, , or 277 VAC Field adjustable DIP switch SPDT and DPDT all-in-one UL type 3R outdoor enclosure is standard Power and status LED indicator lights Real time clock face easy to program and read Captive trippers can t be lost Independently adjustable trippers at 2 hour intervals (15 minute intervals for the GMTM40) On/off/auto override switch Ground lug termination Large screw terminals for easy wiring #8 AWG TMGM40 Intermatic 24-Hour Timer $ TMGM40W Intermatic 7-Day Outdoor Timer TMHDT101 Intermatic T101 Timer w/metal Case (120V) TMHDT104 Intermatic T104 Timer w/metal Case (240V) TMHDTRIP 1 Set (ON/OFF) Metal Tripper for T101 & T HYGRO-THERMOMETER This large number LCD display is visible from a distance. Very accurate and hangs or mounts on a wall surface. HGIOHTJ Active Air Hygro-Thermometer $21.95 TEMPERATURE/HUMIDITY GAUGE Large dial keeps you informed about your growing environment's temperature and humidity. Easily visible across the room. HGTHG Temperature/Humidity Gauge $23.95 hydrofarm.com 247

10 OLLERS LA CROSSE WIRELESS REMOTE TEMPERATURE & HUMIDITY MONITOR WITH EARLY WARNING ALERTS Use a smartphone, tablet or computer to monitor ambient temperature and humidity while you're away. Ideal for greenhouses, gardens, basements, offices, attics anywhere temperature and humidity are a concern. Just connect the Gateway to your existing router with the included LAN cable. The temperature and humidity sensor transmits data to the Gateway (200 ft. range), which then uploads your data to the LaCrosse website for 24/7 remote monitoring via alert or text message. iphone not included YOU CAN... Set custom early warning text and alerts to notify you to take action when temperature or humidity exceed the desired range, the connection is lost which could signify a power outage, or the sensor batteries are low Monitor and protect sensitive plants, gardens, greenhouses and indoor / outdoor temperature and humidity Monitor greenhouse temerature and humidity levels. Prevent mold or frozen pipes with humidity and temperature level alerts FEATURES Monitor (CH1) ambient air temperature and humidity Probe temperature (CH2) when optional probe is attached (dry, wet, and wetthreaded probe are sold separately) Weather resistant case Add up to 5 sensors per gateway to monitor addional areas 200 ft wireless range SPECIFICATIONS Humidity range: 3% to 99% (%RH) Temperature range: -40 F to 140 F 2 "AAA" Alkaline batteries (not included) Internet gateway, LAN cable and AC adapter included High-speed Internet and router required Wall hanging or free standing LCT1111 La Crosse Temp & Humidity Wireless Alert System $ LA CROSSE WIRELESS WEATHER STATION WITH MOON PHASE Instant weather right at your fingertips! The LaCrosse Wireless Weather Station displays indoor/outdoor temperature and humidity, plus moon phase. 8 Moon phases IN/OUT temperature with MIN/MAX records ( F/ C) IN/OUT humidity (%RH) 12/24 Hour time display Calendar (month and date) Low battery indicators Desktop or wall hang SPECIFICATIONS: 260 ft. transmission range Wireless outdoor temperature range: F to F (-39.9 C to 59.9 C) Indoor temperature range: 14.1 F to F (-9.9 C to 59.9 C) Outdoor humidity range: 1-99% Indoor humidity range: 20-95% Up to 12 month battery life Weather display: 2 "AAA" alkaline batteries Thermo-hygro transmitter: 2 "AAA" alkaline batteries LCT9066 La Crosse Wireless Weather Station w/moon Phase $34.95 BIOWAVE SUB SONIC SOUND DEVICE The Biowave Sub Sonic Sound Device creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields. The 9200 unit is specifically designed for indoor plants. Increase plant yields by an average of 20%! BW92000 Biowave Sub Sonic Sound Device $ hydrofarm.com