Industrial vacuum cleaners powerful, versatile and easy to manage. Industrial Vacuum Cleaners

Transcription

1 Industrial vacuum cleaners powerful, versatile and easy to manage

2 Comac's industrial vacuum cleaners. Innovative and functional, they help you to resolve any vacuuming requirements in the industrial environment The Comac industrial vacuum cleaners are a complete line of mobile devices able to suck in both small and large quantities of liquids and solids. They have been designed for particularly taxing operations as well, allowing the intake material to be quickly emptied. Easy to handle, powerful, quiet, with single or threephase power supply, these vacuum cleaners are the ideal equipment for removing dusts, solids or liquids in every situation. The vast range of accessories allows you to customise each single vacuum cleaner, adapting it to even the most difficult suction needs. The table below guides the user in choosing the most suitable unit model for his own specific requirements. It's clear that for intermittent operations, a singlephase vacuum cleaner is sufficient; for the continuous removal of heavier dirt however, or where greater power is necessary in order to reduce the work times, the use of a threephase model is recommended. In addition, it's very important to identify the precise model suitable for the type of suction required: Comac gives you a choice of models that remove dust only, or those that can handle dust and liquids simultaneously. Table for choosing the industrial vacuum cleaner that's most suitable for your needs HEAVY PARTICLES LIGHT PARTICLES CA0 ON./00 CA.5 CA.0 CA.50 CA75 S/SEA CA.40 CA./SE/SEA CA0 S/SS CA40 ON./00 CA40 ON Atex CA40/SEA CAT TSP CA.0 CA.50 CA75/SEA CA.40 CA. CA.00/SE/SEA CA00T SEA CA50T SEA SINGLEPHASE THREEPHASE SMALL PARTICLES LARGE PARTICLES KEY WORDS: Dust Liquids

3 040 CA.5 It is a singlephase vacuum cleaner suitable for using on light dusts. The capacity of the trolley container, along with the dimensions of the filter and external shaker, make this the most compact model of the family of industrial vacuum cleaners, despite using the same accessories (40 mm diameter) as the line of commercial vacuum cleaners. CA.0/.0 CA.50/.50 CA./..00 These are singlephase vacuum cleaners for dusts and liquids; thanks to their sturdiness, mobility and performance they are the ìbest Sellersî of the entire range, and can be used in applications that demand the most from a singlephase unit. It is possible to choose from trolley tanks of and 00 litres, or motors, and (upon request) mechanical and/or electronic floats are available when removing liquids, to ensure absolute safety. Upon request, filters in class M, H, antistatic and heatproof can be assembled. These are singlephase vacuum cleaners suitable for using on light dusts. They have a sturdy yet light frame that makes them easy to move. Available with one or two motors. Depending on your particular suction requirements, you can choose a model with 0or 50 litre capacity container. CA.40/.40 These are singlephase vacuum cleaners suitable for using on mediumheavy dusts. The container capacity of 40 litres is recommended when the dust particles are not large. These vacuum cleaners have a particularly sturdy frame, a suction nozzle with a diameter of mm, and a filter with a filtering surface of 9,500cm. They are especially suitable for environments where only a singlephase voltage is available. Depending on the required use, you can choose between the and motor versions. They are also recommended thanks to their front fan. Upon request, filters in class M, H, antistatic and heatproof can be assembled. CA.5 CA.0/.0 CA.50/.50 CA.40/.40 CA./. SINGLEPHASE In

4 CA. SE/SEA CA.00 SE/SEA These are singlephase vacuum cleaners for dusts and liquids; they are characterised by the possibility of greater control of the outlet air, and greater practicality during maintenance operations. In addition to models. and.00, the SE version models have an electric shaker operated by a handy button, while the SEA version models are fitted with a sophisticated filter cleaning system. The versions with automatic electric shaker (SEA) have working modes: automatic mode When the filter becomes less efficient, motor operation is automatically interrupted and a 0second filter cleaning cycle begins. When the cycle has ended, the motors will restart automatically. Or: manual mode With the motors switched on, press the shaker button to interrupt motor operation and begin a 0second filter cleaning cycle. When the cycle has ended, the motors will restart automatically. semiautomatic mode Every time all the motors are switched off, a 0second filter cleaning cycle begins automatically. Upon request, filters in class M, antistatic, heatproof, H, and a mechanical/electronic float can be assembled on these suction units. In addition, HEPA cartridge filters can be assembled upon request for the inlet air, the tank outlet air, and the motor cooling air. Essential for removing microdust. CA0 ON./00 These are singlephase suction units with turbine, essential for continuous cleaning operations involving dust, flours, chips of every type and liquids of varying densities. You can choose the or 00litre version. The vertical form allows these suction units to be used even in reduced spaces where a powerful, continuous suction is required. They are also extremely easy to move. The turbine with silencer guarantees a good acoustic level. Upon request, filters in class M, H, antistatic, heatproof, and a mechanical/electronic float can be assembled. CA.00 CA. SE/. SEA CA.00 SE/.00 SEA CA0 ON./00 dustrial vacuum cleaners

5 400 CA0 S/SS Threephase industrial vacuum cleaners that are powerful yet easy to move, for applications requiring frequent movements in reduced spaces. They are fitted with a threephase coaxial turbine in diecast aluminium. Reliable, and designed for continuous heavyduty use, they are recommended for car washes and the ceramic, chemical, mechanical and textile sectors. They are ideal for removing dust, flours, chips and liquids of varying densities. The SS version is fitted with a filter as standard, and is referred to as a vacuum cleaner for dusts, while the S version can work on both dusts and liquids. Upon request, class M and heatproof filters can be assembled on both models. CA40 ON Atex This is a certified vacuum cleaner for use in areas where the maximum operating safety is required. It has been designed to work on dust with a potentially low explosion risk (Potentially explosive areas classified as Zone ). They can therefore be used for cleaning ovens, in the chemical/pharmaceutical sector, in mills, etc. CA40 ON./00 These are threephase vacuum cleaners with a sturdy frame; thanks to the good depression values and air flow rates, they can be used for a multitude of applications. By adding the filter of 9,500cm, the cyclonic cone and the tangential nozzle, they can work on dusts and/or liquids with a high power level guaranteed by the positioning of the turbine in direct contact with the filtering system. They are highly reliable and have been designed for continuous heaveduty use: they are recommended for the agroindustrial, ceramic, chemical, mechanical and textile sectors. Their vertical form allows them to be easily moved, even in reduced spaces. You can choose the or 00litre version with trolley tanks. CA0 S/CA0 SS CA40 ON./00 CA40 ON Atex THREEPHASE Industrial v

6 CA40/75/75 S/SEA These are very powerful threephase vacuum cleaners with the turbine installed in a rear compartment. Their considerable size does not facilitate movements so they are best suited to environments where they can be used in a fixed position. They have been designed with a particularly sturdy frame that makes them remarkably solid. The material sucked in by the cyclonic effect tends to deposit on the floor of the container, while the finer dust particles contained in the mixture settle on the filtering surface that captures them. Despite having the same power characteristics, CA75 and CA75 S are targeted at different types of use; in particular, model CA75 favours the air flow so accessories with a large diameter can be used on it, while model CA75 S has a notable depression so it is ideal for especially heavyduty residues. The SEA versions have the same performance levels and the same characteristics as the normal models, but they are fitted with an especially attentive filter cleaning system. The versions with automatic electric shaker (SEA) have working modes: automatic mode After every 0 minutes of uninterrupted operation, the device stops automatically and a 0second cleaning cycle begins. When the cycle has ended, the device will restart automatically. Or: manual mode With the turbine operating, press the shaker button to interrupt turbine operation and begin a 0second filter cleaning cycle. When the cycle has ended, the turbine will restart automatically. CA T TSP This is a vacuum cleaner designed for use on large quantities of very fine dust (e.g. cement) that tends to clog the filters in a short time. The presence of a cartridge filter and a pneumatic shaker guarantees excellent working autonomy. CA00 T/50 T SEA These are vacuum cleaners used for applications requiring top performance levels on large quantities of material and residue. The considerable dimensions mean that these units should be used in a fixed position, or at least with very limited movements. 7 filtering cartridges guarantee an overall suction surface of 85,000cm, while the vibrating shaker system ensures the filter is fully cleaned. The tangential nozzle, with its large diameter (0mm), creates the ideal conditions for working with the separate dust collector (separator). In this way, it is possible to take in large quantities of dirt while notably increasing the work productivity and halving the work time Vacuum gauge Vacuum gauge CA40/75/75S CA40/75/75S SEA vacuum cleaners CA T TSP CA00T/50T/SEA

7 The plus factors that characterise the Comac industrial vacuum cleaners All the models are fitted with: A manual, electric or pneumatic shaker The shaker is important to facilitate the cleaning of the filtering apparatus without opening the vacuum cleaner. Apart from the models fitted with a manual shaker, there are also those with an electric one (SE version) and others with an automatic electric shaker (SEA version). With this function, by setting the shaker cleaning in automatic mode the vacuum cleaner carries out the operation autonomously, so there is no need to continuously check the operation. Cyclone cone This is fundamental for reducing the work time, allowing you to pass from the suction of liquids to that of solids, or both types simultaneously (e.g. when removing machining residues where liquid refrigerants are also present). Tangential inlet nozzle This improves suction quality and the lifespan of the filter, extending its working life and safeguarding it from both damage and obstruction. Releasable trolley tank Its ergonomics and easytouse form facilitate the moving and emptying of the recovery tank. Widesurface filter The use of widesurface filters, combined with the effectiveness of the shaker system, reduces work interruptions; this means the operator's productivity level is increased. For certain vacuum cleaner models, the filters can also be supplied in M, antistatic, heatproof and HEPA versions upon request. Mechanical float Available upon request, as an optional; easy to install. Characterised by its ease of use when removing liquids, and also ensures the maximum reliability and safety for the operator, interrupting suction at the highest permitted level and therefore safeguarding the suction motor. The Comac vacuum cleaners are produced as standard with painted tanks (apart from models CA.5, CA.0, CA.0, CA.50, CA.50, CA0 S, CA0 SS, CA40 ON Atex), but a stainless steel version is available upon request. shaker Cyclone cone Tangential inlet nozzle Standard accessories available upon request Releasable trolley tank Widesurface filter STANDARD KIT Ø40 EXTRA KIT Ø40 STANDARD KIT Ø50 EXTRA KIT Ø50 Mechanical float ANTISTATIC KIT Ø40 ANTISTATIC KIT Ø50 STANDARD KIT FOR OVENS Ø40 EXTRA KIT FOR OVENS Ø40 The vacuum cleaners are supplied as standard with a reduction of Ø 50 apart from model CA 0S apart from models CA.5, CA 0S, CA T TSP apart from models CA.5, CA 0S, CA 0SS, CA40 ON/Atex apart from models CA 0S, CA 0SS only releasable

8 SINGLEPHASE VACUUM CLEANERS THREEPHASE VACUUM CLEANERS KITS TO BE USED UPON REQUEST Standard Ø40 mm Extra Ø40 mm Standard Ø50 mm Extra Ø50 mm Antistatic Ø40 mm Antistatic Ø50 mm Standard kit for ovens Ø40 mm Extra kit for ovens Ø40 mm KEY WORDS: Kits upon request Can be used with side branch 0/50/50 With heatproof filters TECHNICAL CHARACTERISTICS DC motors (qty) Turbines (qty) Stages (qty) Power Suction vacuum KW kpa Air flow m /h Drum capacity l Filtering surface m Ø suction mouth mm IP protection rating CA.5, 5 5 0,7 50 SINGLEPHASE VACUUM CLEANERS THREEPHASE VACUUM CLEANERS CA.0, 5 0, CA.0 CA.5, , CA.0 CA.0 CA.50 CA.50 CA.40 CA.40 CA. CA. CA.00 CA. SE CA.00 SE CA. SEA CA.00 SEA CA.50 CA0 ON. CA0 ON.00 CA0 S CA0 SS CA40 ON. CA40 ON.00 CA40 ON Atex CA40 CA75 CA75 S CA40 SEA CA75 SEA CA75S SEA CAT TSP CA00 T SEA CA50 T SEA, 5 50, CA.50, , CA.40, 89 40,95 CA ,95 CA., 89,95 CA. 58,95 CA.00 Dust Liquids Tank material 58 00,95 CA. SE, 89,95 Cyclonic system CA.00 SE 58 00,95 CA. SEA, 89,95 Shaker Electric CA.00 SEA Electric Automatic Electric/ Automatic Pneumatic Mechanical vibrating 58 00,95 CA0 ON., 0 00,95 Standard filters Antistatic Cartridge Cartridges CA0 ON.00, ,95 CA0 S,9 80 0,4 Filters on request Class M, Class M, Class M, Class M, Antistatic CA0 SS,9 50 0,7 CA40 ON.,9,95 Machine weight kg CA40 ON.00,9 00,95 CA40 ON Atex,9 00,95 CA40/75/75S Machine dimensions mm L x H x W 50x080x50,9 5,5 5, ,95 6x0x 6x0x 6xx 6xx 80x0x590 80x0x590 90x400x6 90x400x6 6x590x6 90xx6 90x4x6 90xx6 90x4x6 90x50x6 90xx6 00x00x 00x0x 90x50x6 90xx6 90xx6 40xx6 40xx6 40xx6 40x490x6 40x490x6 40x490x6 40xx6 x90x900 x90x900 CA40/75/75S SEA,9 5,5 5, ,95 CAT TSP,9,95 CA00T SEA 8 4 8,5 0 CA50T SEA 40 8,5 0 COMAC Spa reserves the right, at anytime, to make technical and/or equipment modifications without prior notification. The images are shown as reference only and are not binding as to the actual design and/or equipment. COD /09 Copyright COMAC 009 The machines are manufactured in compliance with the Directives 006/4/EC, 006/95/EC, 004/08/EC and the harmonised standards IEC 5 part and part. The steel parts are subject to treatment which guarantees a long life and makes the parts oxidationproof. KEY WORDS Machine for industrial use E Mainspowered machine with voltage value COMAC spa Via Ca Nova Zampieri, 5 57 San Giovanni Lupatoto Verona Italy Tel Fax on line: com@comac.it Organisation certified with Q.C.B. Italia ISO 900:000