GDM-72. Part # Part Description Size/VIN Additional Information

Transcription

1 GDM ACCUM/CAPILLARY, SUCTION LINE, R-134A, LEFT 10' X 0.054" ID ACCUM/CAPILLARY, SUCTION LINE, R-134A, RIGHT 10' X 0.054" ID ACCUM/CAPILLARY/SUCTION LINE, R-12, LEFT 8' X 0.046" ID ACCUM/CAPILLARY/SUCTION LINE. R-12, RIGHT 8' X 0.046" ID ACCUMULATOR 9" LOCATED BETWEEN EVAPORATOR COIL AND SUCTION LINE. DRAWING ADAPTER, POWER, STANDARD KEIL PAN HEATER CONNECT TO POWER FOR HARDWIRING TO CABINET ALARM, TEMPERATURE, CHROMOTOGRAPHY, CELCIUS CELCIUS DIGITAL DISPLAY. IN PLASTIC CASE. USED TO DIGITAL DISPLAY, 115V MONITOR TEMPERATURES. THIS IS A PANEL MOUNT MODEL FOR FACTORY INSTALL ONLY. INCLUDES NIMH BATTERY BACKUP ALARM, TEMPERATURE, CHROMOTOGRAPHY, CELCIUS DIGITAL DISPLAY, 115V/208V/220V/CE ALARM, TEMPERATURE, CHROMOTOGRAPHY, CELCIUS DIGITAL DISPLAY, 208V/220V ALARM, TEMPERATURE, CHROMOTOGRAPHY, FARENHEIT DIGITAL DISPLAY, 115V/208V/220V/CE ALARM, TEMPERATURE, CHROMOTOGRAPHY, FARENHEIT DIGITAL, 115V BACK PLATE KIT, DOOR GASKET BACK PLATE, DOOR GASKET, SIDE PIECE BACK PLATE, DOOR GASKET, TOP OR BOTTOM PIECE BACKSCREEN, BLACK ALUMINUM GUARD, LEFT SIDE BACKSCREEN, BLACK ALUMINUM GUARD, RIGHT SIDE BAFFLE, EVAPORATOR FLORAL BALLAST, LIGHT, 115V, DOOR, IDL, RIGHT, T BALLAST, LIGHT, 115V, DOOR, IDL, T8 24K LAMP BALLAST, LIGHT, 115V, DOOR/SIGN, IDL, T BALLAST, LIGHT, 115V, INTERIOR/SIGN, NON-IDL BALLAST, LIGHT, 115V, INTERIOR/SIGN, T-8 LAMP BALLAST, LIGHT, 208V, IDL BALLAST, LIGHT, 208V, IDL BALLAST, LIGHT, 220V/CE, DOOR, IDL/SIGN, 15K BALLAST, LIGHT, 220V/CE, RIGHT DOOR 15K BALLAST, LIGHT, 220V/CE, RIGHT DOOR 15K, REPLACE WITH BALLAST/ELECTRICAL BOX, DOLLAR GENERAL ONLY BAR, DRAIN PAN, CONDENSATE BAR, WICKING, 25", CLEAR ALUMINUM BASE, COMPRESSOR, METAL PLATFORM BASE, GASKET, PERIMETER STAINLESS, VERTICAL CENTER MULLION BASE, LAMPHOLDER/ LAMPSHIELD, IDL DOOR BASE, LIGHT STARTER, 220V, IDL & NON-IDL BASE, MULLION, VERTICAL, BLACK PLASTIC BASKET, NOVELTY, 19 1/4"W X 17 1/8"D BASKET, NOVELTY, 19-1/4"W X 21 3/4"D BEARING, THRUST, DOOR HINGE BLADE, FAN MOTOR, CONDENSER, R-12 SYSTEM BLADE, FAN MOTOR, CONDENSER, R-134A SYSTEM BLADE, FAN MOTOR, EVAPORATOR BLOCK, COMPRESSOR MOUNTING BLOCK, DOOR HINGE, BOTTOM BLOCK, DOOR HINGE, TOP BLOCK, TERMINAL, 220V CE/VDE, IDL BOLT, COMPRESSOR MOUNTING LRBH CELSIUS DIGITAL DISPLAY. FOR FIELD INSTALL. MONITORS TEMPERATURES AND SOUNDS ALARM WHEN TEMPERATURE BEYOND RANGE SET. INCLUDES NIMH BATTERY BACKUP CELCIUS DIGITAL DISPLAY. IN PLASTIC CASE. USED TO MONITOR TEMPERATURES. THIS IS A PANEL MOUNT MODEL FOR FACTORY INSTALL ONLY. INCLUDES NIMH BATTERY BACKUP LRBH FOR FIELD INSTALL. THIS MONITORS TEMPERATURES AND SOUNDS ALARM WHEN TEMPERATURE GOES BEYOND RANGE SET. INCLUDES NIMH BATTERY BACKUP IN PLASTIC CASE. USED TO MONITOR TEMPERATURES. THIS IS A PANEL MOUNT MODEL FOR FACTORY INSTALL ONLY. INCLUDES NIMH BATTERY BACKUP 2)54-1/4" 2)25-1/2" LOCATED ON BACK OF DOOR TO HOLD THE DOOR GASKET. 4 PIECES 54-1/4" L LOCATED ON BACK OF DOOR TO HOLD THE DOOR GASKET 25 1/2" LOCATED ON BACK OF DOOR TO HOLD THE DOOR GASKET 37 1/16"W X 12 1/2"H PERFORATED METAL. COVERS COMPRESSOR AREA IN REAR OF CABINET TO PREVENT ACCESS. 37 1/16"W X 12 1/2"H X 1/2" PERFORATED METAL. COVERS COMPRESSOR AREA IN REAR OF CABINET TO PREVENT ACCESS. 29 3/4"W X 4 1/4"L TWO REQUIRED R-1P32-TP REL-3P32SC REPLACES THE REL-3P32RH-TP AND QT3X32120IS-SC R2-P32TP FOR T-8 LAMP BEFORE 24K R2S40-TP REL-2P32SC ELECTRONIC VIC-2S32 FOR T-8 LAMP VIC-132 ELXC VOSSLOH FOR 15,000 HOUR LAMPS ELXc , FOR 15,000K LAMP ELXC VOSSLOH FOR 15,000 HOUR LAMPS 7-1/2" X 5-1/2" X 12 USED AFTER SER. NO USED TO SUPPORT OPTIONAL METAL DRAIN PAN. 25" X 1 1/16" HOLDS WICKING PANS ON DRAIN PAN. 15" X 13" 51 17/32" X 2 13/16" LOCATED ON CABINET'S CENTER MULLION BETWEEN DOORS. 2 3/8" L SHAPED PLASTIC BRACKET Watt 19 1/4"W X 17 1/8"D X 5" INCLUDES 3 DIVIDERS. SETS ON SHELF 19 1/4"W X 21 3/4"D X 5" SETS ON A SHELF. 3 DIVIDERS INCLUDED. 10" - 4 BLADE - 22 S 10" - 4 BLADE -32S 7" - 3 BLADE G5/2 5/16-18 X 1-1/2" ROUNDHD CARRIAGE Page 1 TO MOUNT COMPRESSOR TO BASE. (ONE ONLY)

2 GDM BOLT, SKID 3/8-16 X 3" HEX HD. TAP HOLDS COOLER TO SKID BOX, TIMER BOX BRACE, CABINET LEG, L SHAPED 10 14/32" X 10 14/32 LOCATED IN COMPRESSOR AREA IN CORNERS UNDER TANK. IDL POWER S FEED THROUGH HOLE IN BRACE ON SOME MODELS BRACKET, BACKSCREEN GUARD, END PIECE 7-1/2"L X 2" X 1/2" ONE REQUIRED FOR EACH END OF GUARD BRACKET, BACKSCREEN, MIDDLE FOR POWER, BLACK 2-1/2" X 2-1/2" X 1" BRACKET, CENTER CABINET BACK SUPPORT 12 3/8" X 7/8" LOCATED BETWEEN RAIL FRAME AND REAR CABINET BACK BRACKET, CENTER DOOR SUPPORT 12" X 2" LOCATED BETWEEN RAIL FRAME AND BOTTOM OF DOOR MULLION. CENTER BOTTOM HINGES ARE ATTACHED TO THIS SUPPORT BRACKET BRACKET, CRATING, DOOR SUPPORT FITS UNDER DOOR. 9" BRACKET, FAN MOTOR, CONDENSER BRACKET, FAN MOTOR, EVAPORATOR SHALLOW: INCLUDES 1) BASE BRACKET, GRILL EXTRUSION TO HOLD CORNERS OF EXTRUSION TOGETHER BRACKET, HINGE, DOOR, BOTTOM RIGHT OR LEFT BRACKET, HINGE, DOOR, TOP BRACKET, MAST, BOTTOM, CHROMOTGRAPHY SCREWED INTO FLOOR OF CABINET BRACKET, MAST, TOP, CHROMOTGRAPHY 26-1/2" X 1" V SHAPED ATTACHES TO BACK WALL OF CABINET BRACKET, SHELF STANDARD, BOTTOM MOLDED PLASTIC FOR BOTTOM OF CENTER STANDARD. REPLACES METAL "L" BRACKET BRACKET, SHELF STANDARD, TOP 8 /7/16"W X 2 11/32"D HAS THIN I BEAM CUTOUT BRACKET, SHELF STANDARD, TOP 8 7/16"W X 2 11/32"D HAS WIDE I BEAM CUTOUT BRACKET, SIGN FRAME CORNER, FOR FLAT SIGN 1 9/16" X 1 9/16" L SHAPED 3-1/16" FLAT BEFORE FORMED. REQUIRES 1 PER ASSEMBLIES CORNER BRACKET, SIGN FRAME END USE METAL CORNER FOR PLASTIC EXTRUSION BRACKET, SIGN FRAME END, LANDSCAPE DESIGN BUSHING, BACKSCREEN GUARD, 115V HEYCO SR DOUBLE D # BUSHING, BALLAST BOX 1/2" BUSHING, DOOR HINGE, BRASS 3/8" ID X 1/2" OD BUSHING, POWER, IDL INSERTS INTO GRILL BUSHING, POWER, IDL, ON GRILL 3/8" HEYCO BUSHING, STRAIN RELIEF, IDL DOOR LIGHT POWER 1/2" BUSHING, STRAIN RELIEF, MAIN POWER & IDL DOOR 5/8" LIGHT POWER BUSHING, STRAIN RELIEF, POWER, 220V CE & 1724 PROTECTS POWER FROM BEING PULLED OUT. ELECTRICAL ENCLOSURE FOR ALL REMOTE UNITS ALL VOLTAGES BUSHING, STRAIN RELIEF, POWER, MAIN STRAIN RELIEF FOR MAIN POWER CABINET BACK, LOWER PLEASE SPECIFY COLOR CABINET BACK, TOP PLEASE SPECIFY COLOR CABINET END, BLACK, LEFT INCLUDES: CABINET END, TWO WAY TAPE, PLASTIC STRIP FOR FRONT OF CABINET, BRACKETS FOR TOP AND BOTTOM OF ENDS, RIVNUTS CABINET END, BLACK, RIGHT INCLUDES: CABINET END, TWO WAY TAPE, PLASTIC STRIP FOR FRONT OF CABINET, BRACKETS FOR TOP AND BOTTOM OF ENDS, RIVNUTS CABINET END, REFRUBISHING KIT, PEPSI INT'L ENDS & BRACKETS, TAPE CABINET END, REFURBISHING KIT 2 ENDS & BRACKETS - SPECIFY GRAPHICS CABINET END, REFURBISHING KIT, TROPICANNA 2 ENDS & BRACKETS CABINET END, ROSEWOOD, LEFT CABINET END, ROSEWOOD, RIGHT CABINET END, STAINLESS, LEFT CABINET END, STAINLESS, RIGHT CABINET END, WALNUT, LEFT CABINET END, WALNUT, RIGHT CABINET END, WHITE, LEFT INCLUDES: CABINET END, TWO WAY TAPE, PLASTIC STRIP FOR FRONT OF CABINET, BRACKETS FOR TOP AND BOTTOM OF ENDS, RIVNUTS CABINET END, WHITE, RIGHT INCLUDES: CABINET END, TWO WAY TAPE, PLASTIC STRIP FOR FRONT OF CABINET, BRACKETS FOR TOP AND BOTTOM OF ENDS, RIVNUTS CABINET SPACER, SPECIFY COLOR 76 15/16"L X 3/4"W GIVES FINISHED LOOK WHEN CONNECTING TWO CABINETS. TWO REQUIRED PER CABINET - ONE ON RIGHT FRONT EDGE AND ONE ON RIGHT REAR EDGE OF CABINET CAP GLIDE, 20 OZ, COKE RED LEVER SET OF 4 LEVELS. EACH LEVEL HAS 8 GLIDES, 2 CROSS BRACES AND 4 CLIPS. Coolers have to be eqipped rear I beam which cannot be added in field as there is no floor support Page 2

3 GDM for I-beam..not recommended for field retrofit CAP GLIDE, 20 OZ, GENERIC WHITE LEVER SET OF 4 LEVELS. EACH LEVEL HAS 8 GLIDES, 2 CROSS BRACES AND 4 CLIPS. Coolers have to be eqipped rear I beam which cannot be added in field as there is no floor support for I-beam..not recommended for field retrofit CAP GLIDE, 20 OZ, PEPSI BLUE LEVER SET OF 4 LEVELS. EACH LEVEL HAS 8 GLIDES, 2 CROSS BRACES AND 4 CLIPS. Coolers have to be eqipped rear I beam which cannot be added in field as there is no floor support for I-beam..not recommended for field retrofit CAPACITOR, ELECTRICAL FILTER, 220/240V 50 HZ R-134A CE PREVENTS ELECTRICAL NOSE FROM EFFECTING NEARBY ELECTRICAL EQUIPMENT CAPACITOR, START, 115V 60HZ R-12 & R-134A 1/2 HP P85PS125D59 FOR COMPRESSOR AKA9441AXA (AK163AT) & AKA4476YXA (AK169AT) AJA2430JXA (AJ530CT) CAPACITOR, START, 115V 60HZ R-12 1/2HP 85PS165C96 FOR COMPRESSORS AKA9434AXA (AK159AT) & AKA4460YXA (AK168AT) & AZ440CR (AZA0395YXA) ; TP119AR-021-A2 TPA94216YXA CAPACITOR, START, 208/230V & 220/240 R-12 & R-134A CAPILLARY TUBE, R CAPILLARY TUBE, R-134A, REQUIRES CASTOR, SET/6, 2-1/2" 1/2" STEM CASTOR, SET/6, 2-1/2", 1/2" STEM CASTOR, SET/6, 2-1/2", W/27" FRAMES CASTOR, SET/6, 3", 27" FRAME CASTOR, SET/6, 4", 1/2" STEM CASTOR, SET/6, 4", W/27" FRAME CHANNEL, LIGHT FILLER, LEFT HINGED, IDL DOOR CHANNEL, LIGHT FILLER, RIGHT HINGED, IDL DOOR CHROMOTOGRAPHY, ACCESS PORT, PLASTIC CHROMOTOGRAPHY, DUPLEX OUTLET CASE & ELECTRICAL ENCLOSURE FOR REMOTE S CHROMOTOGRAPHY, DUPLEX OUTLET, 115V CHROMOTOGRAPHY, DUPLEX OUTLET, 208V/220V BLANK INSERT CHROMOTOGRAPHY, DUPLEX OUTLET, 208V/220V ENGLAND CHROMOTOGRAPHY, DUPLEX OUTLET, 208V/220V EUROPEAN CHROMOTOGRAPHY, DUPLEX OUTLET, 208V/220V FRENCH CHROMOTOGRAPHY, DUPLEX OUTLET, 208V/220V ITALY CHROMOTOGRAPHY, DUPLEX OUTLET, 208V/220V OLD BRITISH CHROMOTOGRAPHY, MAST CLAMP, COMPRESSOR CLIP, DIVIDER, NOVELTY BASKET CLIP, EVAPORATOR DRAIN PAN CLIP, POWER, DOOR, IDL CLIP, RETAINER, TRUETRAC III & CLIP, SHELF/TRUETRAC CLIP, SHROUD, CONDENSER COIL CLIP, TEMPERATURE CONTROL SLEEVE CLIP/BUTTON, HANGING THERMOMETER COIL, CONDENSER COIL, EVAPORATOR, LEFT SIDE COIL, EVAPORATOR, RIGHT SIDE COIL, FOR SOLENOID VALVE, 208V/50/ 60 HZ 85PS250D10 FOR COMPRESSORS AKA9441AXD (AK163ET), AKA4476YXD (AK169ET), AKA9441AXC (AK163JT),AKA4476YXC 8' X 0.046" ID 10' X 0.054" ID 2-1/2"DIA X 1-3/4"W (1/2"-13 X 1" STEM) INCLUDES: WRENCH AND 6) SHIMS. WITH SILVER HOUSING. RAISES CABINET APPROXIMATELY 3-1/2". 2-1/2"DIA X 1-3/4"W (1/2"-13 X 1" STEM) INCLUDES: 2 LOCKING AND 4 NON-LOCKING CASTORS; WRENCH AND 6) SHIMS. WITH BLACK HOUSING. STANDARD OPTION. RAISES CABINET APPROXIMATELY 3-1/2" 2-1/2"DIA INCLUDES: 3 FRAMES WITH 2 CASTORS WELDED TO EACH, 12 SCREWS. RAISES CABINET APPROXIMATELY 3-3/8". 3"DIA (27" FRAME) INCLUDES: THREE FRAMES WITH TWO CASTORS WELDED TO EACH, 16 SCREW. RAISES CABINET APPROXIMATELY 3-3/4". 4"DIA (1/2"-13 X 1" STEM) INCLUDES: WRENCH AND 6) SHIMS. RAISES CABINET APPROXIMATELY 5-1/4". 4"DIA (27"L FRAME) INCLUDES: TWO FRAMES WITH TWO CASTORS WELDED TO EACH, & 8 SCREWS. RAISES CABINET APPROXIMATELY 5". 51 3/4" BLACK PLASTIC W/FOAM ONLY 51-3/4" X 2-11/16" BLACK PLASTIC W/FOAM ONLY INCLUDES. PORT AND COVER. 650 METAL CASE FOR DUPLEX OUTLET DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. REQUIRES V POWER. DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. DUPLEX OUTLET GOUND FAULT, DOES NOT INLUDE CASE. 3-5/8" X 9-3/4" HOLDS BASE TO CABINET FRAME 1 5/16"W X 13/16"L 3/4" X 2" HOLDS DRAIN PAN IN PLACE. REQUIRES POP RIVET 1 7/8" 2 REQUIRED PER TRUETRAC CHROME PLATED 11" X 9 7/8" X 4" 22 1/2" X 8 3/4" X 3 1/4" 22 1/2" X 8 3/4" X 3 1/4" MKC /50-60 CE Page 3 TIMMERMAN WHITE BUTTON THAT SECURES THERMOMETER TO WALL OF CABINET. USED WITH VALVE

4 GDM COMPRESSOR PULL OUT 63 3/4" COMPRESSOR, 115V 60HZ, R-12 1/2HP AKA9441AXA (AK163AT) INCLUDES: OVERLOAD, RELAY, START CAPACITOR COMPRESSOR, 115V 60HZ, R-134A 1/2HP AKA4476YXA (AK169AT) INCLUDES: OVERLOAD, RELAY, START CAPACITOR COMPRESSOR, 208/230V 60HZ, R-12 1/2HP AKA9441AXD (AK163ET) INCLUDES: OVERLOAD, RELAY, START CAPACITOR COMPRESSOR, 208/230V 60HZ, R-134A 1/2HP AKA4476YXD (AK169ET) INCLUDES: OVERLOAD, RELAY, START CAPACITOR COMPRESSOR, 220/240V 50HZ R-12 1/2HP AKA9441AXC (AK163JT) INCLUDES: OVERLOAD, RELAY, START CAPACITOR COMPRESSOR, 220/240V 50HZ, R-134A 1/2HP AKA4476YXC (AK169JT) INCLUDES: OVERLOAD, RELAY, START CAPACITOR CONDENSING UNIT, 115V 60HZ, R-12, 1/2HP AKA9441AXA (AK163AT) INCLUDES: COMPRESSOR WITH RUBBER MOUNTING BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN MOTOR, FAN BLADE, DRIER, CONDENSING COIL, SHROUD, DRIER, POWER ALL MOUNTED TO BASE CONDENSING UNIT, 115V 60HZ, R-134A, 1/2HP AKA4476YXA (AK169AT) INCLUDES: COMPRESSOR WITH RUBBER MOUNTING BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN MOTOR, FAN BLADE, DRIER, CONDENSING COIL, SHROUD, DRIER, POWER ALL MOUNTED TO BASE CONDENSING UNIT, 208/230V 60HZ, R-134A, 1/2HP AKA4476YXD (AK169ET) INCLUDES: COMPRESSOR WITH RUBBER MOUNTING BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN MOTOR, FAN BLADE, DRIER, CONDENSING COIL, SHROUD, DRIER, POWER ALL MOUNTED TO BASE CONDENSING UNIT, 220/240V 50HZ, R-12, 1/2HP AKA9441AXC (AK163JT) INCLUDES: COMPRESSOR WITH RUBBER MOUNTING BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN MOTOR, FAN BLADE, DRIER, CONDENSING COIL, SHROUD, DRIER, POWER ALL MOUNTED TO BASE CONDENSING UNIT, 220/240V 50HZ, R-134A, 1/2HP AKA4476YXC (AK169JT) INCLUDES: COMPRESSOR WITH RUBBER MOUNTING BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN MOTOR, FAN BLADE, DRIER, CONDENSING COIL, SHROUD, DRIER, POWER ALL MOUNTED TO BASE CONDENSING UNIT, 220/240V 50HZ, R-134A, 1/2HP, CE AKA4476YXC (AK169JT) INCLUDES: COMPRESSOR WITH RUBBER MOUNTING BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN MOTOR, FAN BLADE, DRIER, CONDENSING COIL, SHROUD, DRIER, POWER ALL MOUNTED TO BASE CONTROL, TEMPERATURE VWR AND LAPRACO 077B CONTROL, TEMPERATURE, 115V/208V/220V CE GE#3ART56VAA4 WILL RETROFIT THE WITHOUT RELAY OR CONTROL, TEMPERATURE, 115V/208V/220V/CE, REPLACE 077B6827 WITH CONTROL, TEMPERATURE, HIGH ALTITUDE 077B CONTROL, TEMPERATURE, RED WINE/CHOCOLATE 9503N1318 HOLDS 60 F CONTROL, TEMPERATURE, RED WINE/CHOCOLATE, B0995 DEGREE CONTROL, TEMPERATURE, WHITE WINE, DEGREE 007B1228 FAHRENHEIT CONTROL, TEMPERATURE, WINE/CHOCOLATE CE 9530N1573 HOLDS 60 DEGREE FARENHEIT CONTROL, TEMPERATURE/THERMOMETER, ELECTRONIC, XR20C FARENHEIT/CELCIUS HAS PROGRAMMABLE DIGITAL CHROMOTOGRAPHY CONTROLS ON FRONT TO CHANGE FROM FARENHEIT/CELCIUS., INCLUDES: 2) CONNECTORS, 2) SCREWS, KNOB, BUILT IN TRANSFORMER, AND PROBE , POWER, 11 FOOT, SPECIAL APPLICATION 11 FOOT 14 GAUGEP-39S INCLUDES THREE PRONG PLUG , POWER, 115V 108" 14 GAUGEP39S POWER TO WALL OUTLET , POWER, 115V 109" 12 GAUGEP-38/12GA TO WALL OUTLET 20 AMP , POWER, 208V/220V P-59 TO WALL OUTLET , POWER, 220V CE, BRITISH FROM CABNET TO WALL WITH BRITISH PLUG , POWER, 220V CE, EUROPEAN TO WALL OUTLET WITH EUROPEAN PLUG , POWER, 220V, SRI LANKA TO WALL OUTLET WITH SRI LANKA PLUG , POWER, COMPRESSOR, 115V 31" 16 GAUGE W/#10 EYELETS , POWER, COMPRESSOR, 220V CE C-14R PLUG WITH SPRING SPADE WITH HEAT SHRINK TUBING AND SPRING SPADE TERMINALS OVER WIRE CRIMPS , POWER, DOOR, "Y", IDL 27" ALL VOLTAGE. GOES FROM BALLAST BOX TO 18" DOOR POWER , POWER, DOOR, IDL, 115V, LEFT DOLLAR GENERAL 64" 600 V ONLY , POWER, DOOR, LEFT HINGED & CENTER, IDL 18" ALL VOLTAGES , POWER, DOOR, RIGHT HINGED, IDL 37" ALL VOLTAGE , POWER, MAIN CABINET, NO PLUG, REMOTE 30"L 14 AWG14/3 SJTOW 300 VOLT COMPRESSOR MODELS , POWER, MAIN, 220V CE, AUSTRALIAN FROM CABINET TO WALL OUTLET , POWER, MAIN, DANISH 220V 10' COVER, ACCESS PORT, PLASTIC, CHROMOTOGRAPHY #3723 CLEAR PLASTIC COVER, BALLAST BOX, 115V ALL COUNTRIES BOTTLER COOLERS CHANGED 8/96 Page 4

5 GDM COVER, BALLAST BOX, 220V CE, IDL COVER, BALLAST BOX, LIGHT, 220V CE, IDL COVER, EVAPORATOR COIL 57 1/16" X 18 1/16"D X 4 1/4"H WHITE ALUMINUM COVER, OVERLAND AND RELAY, 1/2 HP UNITS, 115/208/220V FOR 1/2HP COMPRESSORS COVER, SIGN WIRE, 220V CE FOR COOLER WITH INTEGRATED DOOR LIGHTING COVER, TEMPERATURE CONTROL RELAY 3" X 1-1/2" X 4-1/2" MOUNTS TO BALLAST BOX TO COVER RELAY COVER, TEMPERATURE CONTROL, 220V CE PLASTIC COVER TO KEEP PEOPLE FROM ADJUSTING TEMPERATURES COVER, TEMPERATURE CONTROL, 220V CE, WHITE 7 1/2"L X 4 1/8" HAS V SHAPED NOTCH TO SET TEMPERATURE COVER, TEMPERATURE CONTROL, BLACK 7 1/2" X 4 1/8" FOR COOLERS WITH TOGGLE OR PUSH BUTTON LIGHT SWITCH. HAS V SHAPED NOTCH TO SET TEMPERATURE COVER, TEMPERATURE CONTROL, WHITE 7-1/2" X 4 1/8" COVER, TEMPERATURE CONTROL/LIGHT SWITCH BLACK 7 1/2" X 4 1/8" USE WITH ROCKER STYLE SWITCH. HAS V-SHAPED ALUMINUM FOR GE CONTROL NOTCH TO SET TEMPERATURE COVER, TEMPERATURE CONTROL/LIGHT SWITCH CLEAR 7 1/2" X 4 1/8" USE WITH ROCKER STYLE SWITCH. HAS V-SHAPED ALUMINUM FOR GE CONTROL NOTCH TO SET TEMPERATURE COVER, TEMPERATURE CONTROL/LIGHT SWITCH WHITE FOR 7 1/2" X 4 1/8" USE WITH ROCKER STYLE SWITCH. HAS V-SHAPED GE CONTROL NOTCH TO SET TEMPERATURE COVER, TEMPERATURE CONTROL/LIGHT SWITCH, WHITE 7 1/2" X 4 1/8" USE WITH ROCKER STYLE SWITCH. HAS V-SHAPED NOTCH TO SET TEMPERATURE CRATE INCLUDES: TOP CAP, CARDBOARD WRAP, BUBBLES, 4) CORNERS AND PADS FOR DOORS CRATING DOOR SUPPORT BLOCK 9" STEP SHAPED CRAYON, BLACK FOR TOUCH UP CRAYON, BLUE "DARK" 8458H CRAYON, BLUE "RC" CRAYON, BLUE "RC" 8477H CRAYON, COKE GREY 1388G CRAYON, GREEN "SEVEN-UP DARK" 9837F CRAYON, SILVER 8459H FOR TOUCH UP CRAYON, WHITE FOR TOUCH UP DECAL, CABINET END, A & W 26 7/16"W X 76 9/16"L DECAL, CABINET END, MINUTE MAID CANADA 26 7/16"W X 76 9/16"L DECAL, CABINET END, ONE ONLY SPECIFY GRAPHICS - CHECK SELECTION LIST DECAL, CABINET END, ONE ONLY, GATORADE DECAL, CABINET END, SET/2, COW 26-7/16" X 76-9/16" HAS BLACK AND WHITE SPOTS DECAL, CABINET END, SET/2, HEALTH CENTRE, E-HC /16" X 76-9/16" DECAL, CABINET END, SET/2, WINE & CHEESE, E-WCH /16" X 76-9/16" DECAL, CABINET END, SET/2, WINE CELLAR, E-WC /16" X 76-9/16" DETECTOR, FREON LEAK VPE ULTRASONIC DISTRIBUTOR NOZZLE NO. 1, REMOTE UNIT D / DIVIDER, NOVELTY BASKET, LARGE 20 3/8"L X 5"H FOR LARGE PART NO BASKET DIVIDER, NOVELTY BASKET, SMALL 15 1/2"L X 5"H FOR SMALL PART NO BASKET DOOR, LEFT HINGED, BLACK FRAMED, 115V/208V, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, BRASS BUSHING, LAMP, LAMPHOLDERS, LAMPSHIELD, 18" POWER DOOR, LEFT HINGED, BLACK FRAMED, 220V CE, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, BRASS BUSHING, LAMP, LAMPHOLDERS, LAMPSHIELD, POWER DOOR, LEFT HINGED, BLACK FRAMED, 220V CE, IDL, 15K 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, BRASS BUSHING, LAMP, LAMPHOLDERS, LAMPSHIELD, POWER DOOR, LEFT HINGED, BLACK FRAMED, 220V, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, BRASS BUSHING, LAMP, LAMPHOLDERS, LAMPSHIELD, POWER DOOR, LEFT HINGED, BLACK FRAMED, 220V, IDL, 15K 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, BRASS BUSHING, LAMP, LAMPHOLDERS, LAMPSHIELD, POWER DOOR, LEFT HINGED, BLACK FRAMED, NON-IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, BACKPLATE, GASKET, SPRING, HANDLE DOOR, LEFT HINGED, GOLD FRAMED, NON-IDL 25 5/8"W X 54 1/4"L INCLUDES FRAME, GLASS INSERT, SPRING, BUSHING, GASKET, HANDLE DOOR, LEFT HINGED, SILVER FRAMED, 115V/208V, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, LEFT HINGED, SILVER FRAMED, 220V CE, IDL 26 5/8"W X 54 1/4"L NCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, LEFT HINGED, SILVER FRAMED, 220V CE, IDL 15K 26 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER Page 5

6 GDM DOOR, LEFT HINGED, SILVER FRAMED, 220V, IDL 26 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, LEFT HINGED, SILVER FRAMED, 220V, IDL 15K 26 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, LEFT HINGED, SILVER FRAMED, NON-IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, BACKPLATE, GASKET, SPRING, HANDLE DOOR, RIGHT HINGED, BLACK FRAMED 220V CE, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, RIGHT HINGED, BLACK FRAMED 220V CE, IDL, 15K 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, RIGHT HINGED, BLACK FRAMED 220V, IDL 15K 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, RIGHT HINGED, BLACK FRAMED, 115V/208V, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, 37" POWER DOOR, RIGHT HINGED, BLACK FRAMED, 115V/208V, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, "CENTER DOOR" SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, 18" POWER DOOR, RIGHT HINGED, BLACK FRAMED, 220V, IDL 25 5/8"W X 54 1/4"L INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE, SPRING, LAMP, LAMPHOLDER, LAMPSHIELD, POWER DOOR, RIGHT HINGED, BLACK FRAMED, NON-IDL 25 5/8"W X 54 1/4"L ALSO FOR CENTER DOOR WITH STANDARD HINGING. INCLUDES: FRAME, GLASS INSERT, BACKPLATE, GASKET, SPRING, HANDLE DOOR, RIGHT HINGED, GOLD FRAMED, NON-IDL 25 5/8"W X 54 1/4"L USED AS CENTER DOOR WITH STANDARD HINGING DOOR, RIGHT HINGED, SILVER FRAMED, 115V/208V, *IDL 25 5/8"W X 54 1/4"L ALSO CENTER DOOR WITH STANDARD HINGING DOOR, RIGHT HINGED, SILVER FRAMED, 220V CE, IDL 26 5/8"W X 54 1/4"L ALSO CENTER DOOR FOR COOLER WITH STANDARD HINGING DOOR, RIGHT HINGED, SILVER FRAMED, 220V CE, IDL 15K 26 5/8"W X 54 1/4"L ALSO CENTER DOOR FOR COOLER WITH STANDARD HINGING DOOR, RIGHT HINGED, SILVER FRAMED, 220V, IDL 26 5/8"W X 54 1/4"L ALSO CENTER DOOR FOR COOLER WITH STANDARD HINGING DOOR, RIGHT HINGED, SILVER FRAMED, 220V, IDL 15K 26 5/8"W X 54 1/4"L ALSO CENTER DOOR FOR COOLER WITH STANDARD HINGING DOOR, RIGHT HINGED, SILVER FRAMED, NON-IDL 25 5/8"W X 54 1/4"L ALSO FOR CENTER DOOR ON STANDARD HINGED COOLERS. INCLUDES: FRAME, GLASS INSERT, BACKPLATE, GASKET, SPRING, HANDLE DRIER, COMPRESSOR, R12 & 134A ELBOW, EVAPORATOR DRAIN/FLOOR DRAIN, PLASTIC, WHITE INCLUDES MALE AND FEMALE PART EXTRUSION KIT, CABINET END INCLUDES: 2 SIDE PIECES 77", 2 BOTTOM PIECES 27" AND 30) POP RIVETS. ENOUGH FOR TWO ENDS FRAME, DOOR, LEFT HINGED, BLACK, 115V/208V, IDL 26 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, 18" POWER FRAME, DOOR, LEFT HINGED, BLACK, 220V CE, IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, LEFT HINGED, BLACK, 220V CE, IDL 15K 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, LEFT HINGED, BLACK, 220V, IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, LEFT HINGED, BLACK, 220V, IDL 15K 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, LEFT HINGED, BLACK, NON-IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, BUSHING, DOUBLE SIDED TAPE FRAME, DOOR, LEFT HINGED, GOLD, NON-IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, BUSHING, DOUBLE SIDED TAPE FRAME, DOOR, LEFT HINGED, SILVER, NON-IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, BUSHING, DOUBLE SIDED TAPE FRAME, DOOR, RIGHT HINGED, BLACK, NON-IDL 25 5/8"W X 54 1/4"L MOST CENTER DOORS ALSO HINGED RIGHT. INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, BUSHING, DOUBLE SIDED TAPE FRAME, DOOR, RIGHT HINGED, BLACK, 115V/208V, IDL 26 5/8"W X 54 1/4"L ALSO FOR CENTER DOOR WITH STANDARD HINGING. Page 6

7 GDM INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, 37" POWER FRAME, DOOR, RIGHT HINGED, BLACK, 220V CE, IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, RIGHT HINGED, BLACK, 220V CE, IDL 15K 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, RIGHT HINGED, BLACK, 220V, IDL 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, RIGHT HINGED, BLACK, 220V, IDL 15K 25 5/8"W X 54 1/4"L INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, LAMPSHIELD, LAMP, LAMPHOLDERS, POWER FRAME, DOOR, RIGHT HINGED, GOLD, NON-IDL 25 5/8"W X 54 1/4"L MOST CENTER DOORS ALSO HINGED RIGHT. INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, BUSHING, DOUBLE SIDED TAPE FRAME, DOOR, RIGHT HINGED, SILVER, NON-IDL 25 5/8"W X 54 1/4"L MOST CENTER DOORS ALSO HINGED RIGHT. INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING, BUSHING, DOUBLE SIDED TAPE FRAME, SIGN, ASSEMBLY, GOLD 78"W X 8 3/4"H INCLUDES: TOP, BOTTOM AND SIDE PIECES FRAME, SIGN, ASSEMBLY, BLACK 78"W X 8 3/4"H INCLUDES: TOP, BOTTOM AND SIDE PIECES FRAME, SIGN, ASSEMBLY, LANDSCAPE DESIGN 78"W X 9 1/4"H INCLUDES: TOP, BOTTOM AND SIDE PIECES FRAME, SIGN, ASSEMBLY, STAINLESS 78"W X 8 3/4"H INCLUDES: TOP, BOTTOM AND SIDE PIECES FRAME, SIGN, END PIECE, BLACK 8 3/4" DUAL MITER FRAME, SIGN, END PIECE, LANDSCAPE DESIGN FRAME, SIGN, END PIECE, LANDSCAPE DESIGN, USE INCLUDES: 1) END CAP FRAME, SIGN, END PIECE, STAINLESS 8 3/4" WITH 45 DEGREE CUT AT TOP AND BOTTOM OF END PEICE GASKET, DOOR, MAGNETIC 24 5/8"W X 54 1/8"L GRILL EXTRUSION 1/2" PLASTIC X 78" USED ON WALNUT OR PAINTED GRILLS GRILL EXTRUSION 1/2" PLASTIC X 47" UESD ON WALNUT OR PAINTED GRILLS GRILL EXTRUSION 1/2" PLASTIC X 54" USED ON WALNUT OR PAINTED GRILLS GRILL EXTRUSION, BOTTOM PIECE 1/2" PLASTIC X 77" PLASTIC TRIM ON ALL GRILLS EXCEPT STAINLESS GRILL EXTRUSION, LEFT PIECE 1/2" PLASTIC X 11-3/4"L PLASTIC TRIM ON ALL GRILLS EXCEPT STAINLESS GRILL EXTRUSION, RIGHT PIECE 1/2" PLASTIC X 11-3/4"L PLASTIC TRIM FOR ALL GRILLS EXCEPT STAINLESS GRILL EXTRUSION, TOP PIECE 1/2" PLASTIC X 76-9/16"L PLASTIC TRIM ON ALL GRILLS EXCEPT STAINLESS GRILL LOUVER, BLACK, ONE ONLY 74 9/16"L GRILL LOUVER, STAINLESS, ONE ONLY 74 9/16"L GRILL LOUVER, WALNUT, ONE ONLY 74 9/16"L GRILL LOUVER, WHITE, ONE ONLY 74 9/16"L GRILL, ALBERTSON GREY 78"W X 11-3/4"H GRILL, BLACK 78"W X 11 3/4"H GRILL, COPPER 78"W X 11 3/4"H X 2 3/4" GRILL, GDM-72, BLACK, DOLLAR GENERAL, EASY TO REMOVE 78"W X 11 3/4"H GRILL, ROSEWOOD GRILL, STAINLESS 78"W X 11 3/4"H X 2 3/4" GRILL, WALNUT 78"W X 11 3/4"H X 2 3/4" GRILL, WHITE 78"W X 11 3/4"H GROUND FAULT, GFCI, CHROMOTOGRAPHY, 220V & CE 74458X GUARD, FAN MOTOR, EVAPORATOR, WHITE 9 1/4" DIAMETER INCLUDES 1) COVER AND 4) SCREW HANDLE, DOOR, 10 OZ. CONTOUR COKE BOTTLE 9 3/4"L INCLUDES: 2) SPACERS & 2) SCREWS HANDLE, DOOR, BLACK 12" WITH 3/4" SPACERS INCLUDES: 2)11/16" SPACERS , 2) 2-11/16" SCREWS HANDLE, DOOR, NANTUCKET NECTAR INCLUDES: 2) 3/4" SPACERS, 2) 2-5/8" SCREWS HANDLE, DOOR, SEVEN-UP BOTTLE 8 3/4"L W/ 3/4" SPACERS INCLUDES: 2)3/4" SPACERS & 2) SCREWS HANDLE, DOOR, SEVEN-UP BOTTLE EUROPEAN 8 3/4"L W/ 3/4" SPACERS INCLUDES: 2)3/4" SPACERS & 2)SCREWS HANDLE, DOOR, STAINLESS 15" WITH 3/4" SPACERS INCLUDES: 2)3/4" SPACERS AND 2) /16" SCREWS HANDLE, DOOR, SUNDROP INCLUDES: SPACERS, SCREWS HEATER, CONDENSATE PAN, 115V 17" X 4-1/2" 200W USE WITH METAL DRAIN PAN HEATER, CONDENSATE PAN, 208V/220V REQUIRES POWER ADAPTOR 220W USE WITH METAL DRAIN PAN HEATER, DOOR FRAME, 208V 152" 3.5W/FT HEATER, DRAIN PAN, ONE-PIECE, 115V 12 1/2" X 4 3/4" X 2 3/4"D ONE PIECE HEATER AND PAN WITH CIRCUIT BREAKER IN POWER. REQUIRES A POWER ADAPTOR AND A METAL DRAIN PAN FOR HEATER TO SET IN. Page 7

8 GDM HEATER, DRAIN PAN, ONE-PIECE, 208/220V 12 1/2" X 4 3/4" X 2 3/4"D ONE PIECE HEATER AND PAN WITH CIRCUIT BREAKER IN POWER. REQUIRES POWER ADAPTOR. ORDER METAL DRAIN PAN FOR HEATER TO SET IN HOLDER, LINE FUSE, 220V CE CHROMOTOGRAPHY MODELS HOSE, EVAPORATOR DRAIN 7 FT, 1/2"ID, 5/8"OD CUT FROM ROLL INSERT, GLASS, DOOR, IDL MODEL 20 7/8"W X 51 5/8"L X 15/16" T INCLUDESTWO-WAY TAPE FOR INSTALLATION INSERT, GLASS, DOOR, NON-IDL MODEL 23"W X 51 5/8"L X 15/16" T INCLUDESTWO-WAY TAPE FOR INSTALLATION INSULATION, DRAIN PAN, EVAPORATOR 11 1/2" X 58 1/2" INSULATION, MULLION 51" X 3" X 3/8" KIT, BACKSCREEN GUARD MOUNTING INCLUDES 4) BRACKETS, 1) BRACKET, 6) SCREWS KIT, CONDENSATE PAN WICKING INCLUDES 5 PADS & 25" BAR, DOES NOT INCLUDE PAN KIT,, POWER, DOOR, LEFT HINGED & CENTER, IDL 18" ALL VOLTAGES. INCLUDES 1) " POWER, 1) STRAIN RELIEF BUSHING, 1) CABLE CLAMP 1/4" KIT,, POWER, DOOR, RIGHT HINGED, IDL 37" ALL VOLTAGES: INCLUDES 1) " POWER, 1) STRAIN RELIEF BUSHING, 1) CABLE CLAMP 1/4" KIT, DOOR HINGE, BOTTOM, RIGHT OR LEFT INCLUDES: HINGE BRACKET, BRASS BUSHING, BEARING, WASHER, SCREWS KIT, DOOR HINGE, TOP INCLUDES: HINGE BRACKET, BRASS BUSHING, SHAFT, STOP PIN, WASHER, SCREWS KIT, GRILL MOUNTING INCLUDES: 2)9-1/2" END BRACKETS & 3) CENTER BRACKETS KIT, LIGHTING, 24K #2 RETROFIT INCLUDES: 2) LAMPSHIELD KIT, LIGHTING, 24K RETROFIT INCLUDES: 4) F032/865/EX/ECO LAMPS AND 2) LAMPSHIELD KIT, LIGHTING, 24K RETROFIT INCLUDES: 2) REL-2P32PSC BALLAST, 4) F032/865.EX/ECO 48" LAMP, 2) /16" X 1-1/4" OD LAMPSHIELD KIT, LIGHTING, 24K RETROFIT INCLUDES: 2) REL-2P32PSC BALLAST, 1) REL-1P32-SC BALLAST, 5) F032/865.EX/ECO 48" LAMP, 3) W/4.5" LEAD LAMPHOLDER, 3) W/ 53" LEAD LAMPHOLDER KIT, MIRRORED BACK INCLUDES THREE PANELS, EXTRUSION STRIPS AND TWO WAY TAPE KIT, START COMPONENT 115V 60HZ R-134A, 1/2HP, FOR COMPRESSOR AKA4476YXA (AK169AT) INCLUDES: AKA4476YXA (AK169AT) START CAPACITOR, OVERLOAD, RELAY KNOB, TEMPERATURE CONTROL, DANFOSS KNOB, TEMPERATURE CONTROL, RANCO/CUTLER HAMMER LAMP, DOOR/SIGN, 115V/208V, IDL, T-8 48"F032/765 32W CAN BE REPLACED WITH 24K LAMP LAMP, DOOR/SIGN, 115V/208V, IDL, T-8 24K 48"F032/865/EX/ECO THIS LAMP WILL RETROFIT T LAMP. INTERIOR LAMP WOULD REQUIRE LAMPSHIELD TO RETROFIT. IT DOES NOT RETROFIT THE LAMPS LAMP, DOOR/SIGN, 220V/CE, IDL 15K 48"L36W/ LAMP, DOOR/SIGN, 220V/CE, IDL, OBSOLETE REPLACE WITH 48"L36W20 LAMP, L36W20 48", OBSOLETE LAMP, INTERIOR/SIGN, 115V/208/220V, NON-IDL, T-12 48"F40/D865 40W THIS BULB HAS BLUE HUE LAMPHOLDER, 115V/208V/220V, DOOR, IDL "BOTTOM" 542 W/ 4-1/2" LEAD542 TELESCOPIC LAMPHOLDER, 115V/208V/220V, DOOR, IDL "TOP" W/ 52-3/4" LEAD (ONE) LAMPHOLDER, 115V/208V/220V, INTERIOR/SIGN SPRINGLOADED (ONE) LAMPHOLDER, 115V/208V/220V, INTERIOR/SIGN STATIONARY (ONE) LAMPHOLDER, 115V/208V/220V/CE, IDL DOOR FOR BOTTOM OR TOP OF DOOR LAMPHOLDER, 220V CE, SIGN, IDL STATIONARY LAMPHOLDER, 220V CE, SIGN, IDL 255/C-13 SPRINGLOADED LAMPSHIELD END CAP, T12 LAMP, NON-IDL 1-3/4"OD SET/ LAMPSHIELD, DOOR, 115V/208V/220V & CE, IDL 48 3/8" LAMPSHIELD, T12 LAMP, NON-IDL 46-1/4"L X 1 5/8"OD INCLUDES: LAMPSHIELD AND TWO END CAPS LAMPSHIELD, T8 LAMP, 220V, NON-IDL 46 3/8" X 1 1/4"OD INCLUDES END CAPS LEG, ONE ONLY, 1/2" DIA. STEM, SEISMEC 6" STAINLESS BOTH TOP AND BOTTOM PIECE. EXPOSED STEM. USED TO BOLT COOLER TO FLOOR. ADJUST 6" TO 8". 3-1/2" DIAMETER BASE PLATE WITH 2) 7/16"HOLES FOR BOLTS PLACED 2-1/2" CENTER TO CENTER LEG, ONE ONLY, 1/2" STEM 6" (1/2" FLUSH MOUNT) FOR FRAMED STYLE LEG ASSEMBLY. ADJUSTS FROM 6" TO 7-1/2". MADE OF ZINC DIE CAST LEG, SET/6, 1/2" DIA STEM, SEISMEC 6" LEG HAS TWO HOLES IN FOOT TO USE SCREWS TO SECURE TO FLOOR. LEGS ADJUST FROM 6" TO 8-1/2". 3-1/2" DIAMETER BASE PLATE WITH 2) 7/16"HOLES FOR BOLTS PLACED 2-1/2" CENTER TO CENTER TO SECURE Page 8

9 GDM LEG TO FLOOR LEG, SET/6, 1/2" DIA. STEM 6" (1/2" EXPOSED STEM) LEGS ADJUSTS FROM 6" TO 7-1/2". LEGS MADE OF ZINC DIE CAST LEG, SET/6, FRAME STYLE 6" (27" FRAME) OPTIONAL ON ANY SERIAL NUMBER INCLUDES: 3)FRAMES, 12 SCREWS. LEGS ADJUSTS FROM 6" TO 7-1/2" LID, ELECTRICAL ENCLOSURE FOR REMOTE UNITS LIGHT ASSEMBLY, 115V/208V, INTERIOR, NON-IDL INCLUDES TRACK, WIRING, LAMPHOLDERS LIGHT ASSEMBLY, 115V/208V/220V NON-CE, SIGN INCLUDES TRACK, WIRING, LAMPHOLDERS LIGHT ASSEMBLY, 115V/208V/220V, LEFT HINGED, IDL DOOR INCLUDES TRACK/LAMPHOLDERS/BASES//WIRING LIGHT ASSEMBLY, 115V/208V/220V, RIGHT HINGED, IDL DOOR INCLUDES TRACK/LAMPHOLDERS/BASES//WIRING LIGHT ASSEMBLY, 220V CE, LEFT HINGED, IDL DOOR INCLUDES TRACK/LAMPHOLDERS/BASES//WIRING LIGHT ASSEMBLY, 220V CE, RIGHT HINGED, IDL DOOR INCLUDES TRACK/LAMPHOLDERS/BASES//WIRING LIGHT STARTER, 220V CE, IDL & NON-IDL ST LINE FUSE, 220V CE, CHROMOTOGRAPHY MODELS SHUTS OFF POWER TO ENTIRE CABINET WHEN OVERLOADED LINE FUSE, 220V CE, CHROMOTOGRAPHY MODELS SHUTS OFF POWER TO ENTIRE CABINET WHEN OVERLOADED MOTOR, CONDENSER FAN, 115V 60HZ SP-B9HS16 9 WATT. TURNS CLOCKWISE MOTOR, CONDENSER FAN, 208V/220V 50/60HZ ESP-L16EM2 16 WATT. TURNS CLOCKWISE MOTOR, EVAPORATOR FAN, 115V 60 HZ SPB9BA16 9 WATT. TURNS CLOCKWISE MOTOR, EVAPORATOR FAN, 208V/220V 50/60HZ SP-B9BA26 9 WATT. TURNS CLOCKWISE MULLION ASSEMBLY, IDL NAMEPLATE, TRUE NUT, SHELF STANDARD 8-32 HEX NUT, 18-8 STAINLESS STE FOR SCREW ON CENTER STANDARD NUT, SKID 3/8" X OUTLET/RECEPTACLE, COMPRESSOR POWER, # AMP-125V LOCATED NEXT TO THE BALLAST BOX FOR 115V/208V/220V NON CE COMPRESSOR. LOCATED ON BACK OF CABINET AS CONVENIENCE OUTLET ON SOME MODELS OUTLET/RECEPTACLE, COMPRESSOR POWER, FOR COMPRESSOR POWER. 220/240V 50HZ & CE OVERLOAD, 115V 60HZ R-12 1/2HP P FOR COMPRESSOR AKA9434AXA (AK159AT) OVERLOAD, 115V 60HZ R-12 1/2HP 8300MRAG76 FOR COMPRESSOR AKA9441AXA (AK163AT) OVERLOAD, 115V 60HZ R-134A 1/2HP 8300MRTJ79 FOR COMPRESSOR AKA4476YXA (AK169AT) OVERLOAD, 208/230V 60HZ R-12 & R-134A 1/2HP 8300MRAG56 FOR COMPRESSORS AKA9441AXD (AK163ET), AKA4476YXD (AK169ET) OVERLOAD, 220/240V 50HZ R-12 & R-134A 1/2HP 8300MRAG59 FOR COMPRESSORS AKA9441AXC (AK163JT) & AKA4476YXC (AK169JT) PAD, WICKING (SET OF 5) SET OF 5) PADS PAINT/INK, 12 OZ, SPRAY CAN, EVAPORATOR COIL & USED TO RECOAT AN EVAPORATOR COIL OR SUCTION SUCTION LINES LINE PAINT/INK, 16 OZ, SPRAY CAN SPECIFY COLOR PAINT/INK, GALLON, WAL MART BLUE PAINT/INK, PINT STATE COLOR AND ORDER THINNER PAINT/INK, QUART STATE COLOR AND ORDER THINNER PAINT/INK, SPRAY CAN, WALMART BLUE 16 OZ CAN PAN, DRAIN, CONDENSATE, BOTTOM, METAL, OPTION 24 3/4" X 11 1/2" X 2" PAN, DRAIN, CONDENSATE, BOTTOM, PLASTIC 25 1/4"L X 12 3/8"WX 1 3/4" PAN, DRAIN, CONDENSATE, BOTTOM, PLASTIC 18 3/8" X 25 3/8" X 3" PAN, DRAIN, EVAPORATOR 54"L X 9 1/8"W TOP LOCATED BELOW EVAP. COIL.. INCLUDES TWO DRAIN ELBOWS PIN, STOP, DOOR HINGE 5/8"L KEEP TENSION ON DOOR SPRING PLUG, DOOR HANDLE A03 BLACK ARROW CLIP USED TO FILL EXTRA HOLE PLUG, HEATER, DRAIN PAN, 115V 515PA FOR OR V DRAIN PAN HEATER PRICING STRIP, SHELF, ALUMINUM, BLACK 24" X 1-1/4" BLACK PLASTIC PRICING STRIP, SHELF, DOLLAR GENERAL 1-1/4 X 22-3/4" WHITE EXTRUSION PRICING STRIP, SHELF, DOLLAR GENERAL (PACKAGE OF 7) (3"L X 1"H) CLIP ONTO FRONT OF SHELF PRICING STRIP, SHELF, WIRE, ECKERD DRUG 1"W X 19 7/16"L WHITE PLASTIC PRICING STRIP, SHELF, WIRE, WHITE 48" X 1 1/4" EACH STRIP IS ENOUGH FOR TWO SHELVES ON MOST MODELS PRICING STRIP, TRUETRAC 4, 1 LITER 3/4"H PRICING STRIP, TRUETRAC 4, 12 OZ 3/4"H X PRICING STRIP, TRUETRAC 4, 16/20 OZ 3/4"H X PRICING STRIP, TRUETRAC II & III, 12 OZ 2"H X 16 3/8"L PRICING STRIP, TRUETRAC II & III, 16/20 OZ 2"H X 15 1/2"L PRICING STRIP, TRUETRAC II & III, 20 OZ, *IDL 2"H X 12 3/8"L PRICING STRIP, TRUETRAC II, 16 OZ, ECKERD 1"W X 19 7/16"L PROBE, TEMPERATURE CONTROL, CHROMOTOGRAPHY 18NBPTC FOR RC-31 TEMPERATURE CONTROL Page 9

10 GDM RACK, BUN TRAY, NOT AVAILABLE ON THIS MODEL RAIL ASSEMBLY RECEPTACLE, POWER, DOOR, IDL FOR 37" CONNECTS DOOR TO BALLAST. INCLUDES 1) MOLEX, PINS, WIRES RECEPTACLE, POWER, DOOR, IDL, FOR SPLIT "Y" INCLUDES 1) MOLEX, PINS, WIRES 4)7-1/2" RED; 4 7-1/2" BLUE WITH CONNECTORS RELAY, 115V 60HZ R-12 & R-134A 1/2 HP P AKA9434AXA (AK159AT) & AKA4460YXA (AK168AT) AKA9441AXA (AK163AT) AKA4476YXA (AK169AT) RELAY, 208/230V 60HZ R-134A 1/2HP 8200EMBJ90 FOR COMPRESSOR AKA4476YXD (AK169ET) RELAY, 208V/230V 60HZ R-12 1/2HP P82934 FOR COMPRESSOR AKA9441AXD (AK163ET) RELAY, 220/240V 50HZ R-12 1/2HP 8200EMBJ91 FOR COMPRESSOR AKA9441AXC (AK163JT) & AJB2444ZXD RELAY, 220/240V 50HZ R-134A 1/2HP 8200EMBJ89 OR FOR COMPRESSOR 1/2HP AKA4476YXC (AK169JT) RELAY, TEMPERATURE CONTROL G7L-1A-TUB FOR DANFOSS CONTROL RIVET, POP, EVAPORATOR DRAIN PAN 1/8"OD X DOME HD,ALUM.AD42ABS RIVNUT TOOL, CASTOR OR LEG, 1/2" STEM 1/2" X 13C RIVNUT TOOL, KIT, SHELF STANDARD 8/32 HAND HELD INCLUDES: 1) #2 DRILL BIT, 12) RIVNUTS, 1) TOOL RIVNUT TOOL, SHELF STANDARD 8/32 12" LONG RIVNUT, CASTOR OR LEG, 1/2" STEM 1/2-131/2-13 RNS STEEL RIVNUT, DOOR HANDLE, SWING RIVNUT, SHELF STANDARD RNA832-75, 8-32 ALUM SCREEN, CONDENSER FAN MOTOR 10" X 18" SCREW, BACKSCREEN GUARD 8-18 X 3/4" PHILLIPS HEAD SELF BLACK TAPPING SCREW, CASTOR OR LEG, FRAMED STYLE; RAIL ASSEMBLY 1/4-20 X 3/4" IND HEX HD TO CABINET SCREW, COMPRESSOR BASE 1/4-14 X 1 1/2" HEX WASHER HEAD COMPRESSOR BASE TO RAIL SCREW, DOOR HANDLE X 2-5/8" PHIL PAN HD SCREW, DOOR HANDLE, BLACK X 2-17/32" PHIL PAN SCREW, EVAP HSNG., SHELF I BEAM BRACKET X 1/2" INDENTED HEX PIERCING FOR DOOR GUIDE CLIP, BALLAST BOX COVER AND EVAPORATOR HOUSING COVER SCREW, EVAPORATOR FAN MOTOR GUARD 8-18 X 1/2" HEX SERRATED HEAD 8-18 X 1/2" HEX SERRATED HEAD SCREW, FAN MOTOR BRACKET, CONDENSER 1/4-20 X 3/8" PHILLIPS ROUND HEAD SCREW, GRILL MOUNTING 6-18 X 1" PHILLIPS TRUSS HEAD SMS 410SS6-18 X 1" PHILLIPS TRUSS HEAD SM SCREW, GRILL MOUNTING, IDL LAMPHOLDER BASE TO 6-18 X 1/2" PHIL TRS HD FILLER CHANNEL SCREW, GRILL TRIM, GASKET BACK PLATE 8-18 X 3/4" PHIL FLAT HD SCREW, HINGE BRACKET, DOOR 1/4-20 X 1 1/4" IND HEX HEAD THREAD CUT SCREW, LEVELING, ONE ONLY, 1/2" DIA. STEM 1/2"-13 X 1-1/2" RAISES CABINET FROM 5/16" MININUM TO 1-5/16" MAXIMUM FROM FLOOR SCREW, LEVELING, ONE ONLY, 3/8" DIA. STEM 3/8"-16 X 1-1/2" SCREW, LEVELING, SET/6, 1/2" DIA. STEM 1/2"-16 X 1 1/2" H RAISES HEIGHT FROM 5/16" MININUM TO 1-5/16" MAXIMUM SCREW, LEVELING, SET/6, 3/8" DIA. STEM 3/8"-16 X 1 1/2" H SCREW, SHELF STANDARD/THERMOMETER 8-32 X 9/16" STAINLESS STEEL SCREW, SHROUD, CONDENSER COIL, SIGN FRAME TO 8-18 X 1/2" PHILLIPS THIN WAFER HEAD SHROUD TO COIL CABINET; IDL CHANNELS; DRAIN TUBE SUPPORT SCREW, SIGN FRAME END PIECE, BLACK, FLAT SIGN OR 6-18 X 1" BLACK PHILLIPS FLT HEAD LANDSCAPE SCREW, TEMPERATURE CONTROL PLATE 8-32 X 3/8" SLOTTED ROUND HEAD SCREW,SIGN FRAME END PIECE, SILVER 6-18 X 1" PHILLIPS FLAT HEAD SHAFT, DOOR HINGE SHELF STANDARD, BLACK 52" SHELF STANDARD, CABINET SIDE, SILVER 48" SHELF STANDARD, CABINET SIDE, WHITE 52" INCLUDES: 2) SCREWS, 1) STANDARD SHELF STANDARD, CABINET SIDE, WHITE 48" SHELF STANDARD, FRONT OR REAR CENTER, BLACK 52" WITH TOP & (BOTTOM MOLDED PLASTIC) BRACKETS SHELF STANDARD, FRONT OR REAR CENTER, SILVER 48" WITH METAL L BRACKETS SHELF STANDARD, FRONT OR REAR CENTER, WHITE 52" WITH TOP & (BOTTOM MOLDED PLASTIC) BRACKETS SHELF, BLACK WIRE, IDL 24 9/16"W X 22 1/8"D INCLUDES 4) SHELF CLIP SHELF, GDM-49/72, BLACK WIRE, NON-IDL 24 1/4"W X 23 1/2"D INCLUDES 4) SHELF CLIP SHELF, GOLD ALUMINUM 24 1/4"W X 21"D INCLUDES 4) SHELF CLIP SHELF, SILVER ALUMINUM 24 1/4"W X 21"D INCLUDES 4) SHELF CLIP SHELF, WHITE WIRE, DOLLAR GENERAL 24 1/8"W X 22 3/8"D INCLUDES 5" STANDOFF & 4) SHELF CLIP SHELF, WHITE WIRE, HALF, CHROMOTOGRAPHY 24 1/2"W X 11 5/16"D OPTION. INCLUDES 4) SHELF CLIP SHELF, WHITE WIRE, IDL 24 1/4"W X 22 1/8"D INCLUDES 4) SHELF CLIP Page 10

11 GDM SHELF, WHITE WIRE, IDL, NARROW GAP 24 1/4"W X 22 1/8"D INCLUDES 4) SHELF CLIP SHELF, WHITE WIRE, NARROW GAP, NON-IDL 24 1/4""W X 23 1/2"D INCLUDES 4) CLIPS SHELF, WHITE WIRE, NON-IDL 24 1/4"W X 23 1/2"D INCLUDES 4) SHELF CLIP SHIM, CASTOR FOR LEVELING STEMMED CASTOR SHIM, DOOR GLASS THIN - NO CHARGE ITEM SHIM, GLASS INSERT, DOOR.125 X.875 X 2 1/2" THICK - NO CHARGE PART SHIM, HINGE DOOR NO CHARGE PART SHROUD, CONDENSER COIL L SHAPED SHROUD, CONDENSER FAN MOTOR & BLADE GOES OVER TOP CONDENSER SCREEN TO PROTECT HANDS FROM GOING INTO FAN AREA. HALF CIRCLE SHAPED SIGN, BIO COLD SCIENTIFIC SIGN, CHILLED & REFRESHING, (S-CR-01) SIGN, COLD BEER, (S-CBR-01) SIGN, COLD BEER, GLASS, (S-CBR-04) 76 1/2"W X 8 3/8"H SIGN, COLD BEER, MOUNTAIN, (S-CBR-02) SIGN, COLD BEVERAGE CENTER, (S-CBC-01) SIGN, COLD BEVERAGE, BOTTLE, (S-CBV-06) SIGN, COLD BEVERAGE, GLASS & STRAW, (S-CBV-01) SIGN, COLD BEVERAGE, MOUNTAIN, (S-CBV-05) SIGN, COLD BEVERAGE, NO TEXT/GLASSES, (S-CBV-04) SIGN, COLD JUICE (S-CJ-02) BLACK SIGN, COLD JUICE, (S-CJ-01) SIGN, COLD WATER, (S-CW-01) SIGN, COLD WINE, (S-CWI-01) SIGN, CONVENIENCE FOODS, (S-CF-01) SIGN, DELI FOODS (S-DF-03) BLACK SIGN, DELI FOODS, (S-DF-01) SIGN, DESSERTS (S-D-01) SIGN, FRESH FLOWERS, CARNATION, (S-FF-02) SIGN, FRESH FLOWERS, LONG STEM, (S-FF-03) SIGN, GRAB & GO 2004 (S-GGO-01) BLACK SIGN, MICRO BREW-IMPORT, MUG, (SMBI-02) SIGN, MILK & DAIRY 2004 (S-MD-02) BLACK SIGN, MILK & JUICE, (S-MJ-01) SIGN, MILK-EGGS-DAIRY PRODUCTS, (S-MED-01) SIGN, PLAIN WHITE, (S-PW-01) SIGN, PLAIN WHITE, LANDSCAPE, (S-PW-01) 77 3/4"W X 9 9/16"H SIGN, SANDWICHES 2004 (S-S-01) BLACK SIGN, SELF SERVICE, (S-SS-01) SIGN, SOFT DRINKS 2004 (S-SD-01) BLACK SIGN, TONIGHT LASAGNA / WINE (S-LCW-01) SIGN, TRUE STRIPE, (S-TS-01) SIGN, WINE & CHEESE, (S-WCH-01) SKID 81"L X 36" W SLEEVE, TEMPERATURE CONTROL 3/16" X.025 X 12 13/16"L ATTACHES TO COIL SLEEVE, TEMPERATURE CONTROL, LONG, LEFT SIDE 3/16" X.025 X 9"L ATTACHES TO COIL FOR CONTROL TO FEED THROUGH SLEEVE, TEMPERATURE CONTROL, LONG, RIGHT SIDE 3/16" X.025 X 21-1/2"L ATTACHES TO COIL FOR CONTROL TO FEED THROUGH SLIDE, TRUETRAC 4, IDL 2-1/8"W X 21 3/8"L SLIDE, TRUETRAC II & III - LONG 2-1/8"W X 22-1/2"L SLIDE, TRUETRAC II & III, SHORT 2-1/8"W X 19-3/4"L SPACER, DOOR HANDLE, BLACK, SET/2 3/4" SET OF 2) SPACERS SPACER, DOOR HANDLE, SILVER 3/4" SET OF SPACER, SIGN TO COMBINE TWO SIGNS IN ONE FRAME SPRING, HINGE, DOOR 52 1/2" TORSION STYLE, INCLUDES 2 BRASS BUSHINGS SURGE PROTECTOR 115V (OPTION) PFN110-MD GALLIUM BREAKERMATIC PLUG IN, MAXIMUM OF 1 HP. PROTECTS COMPRESSOR ONLY. Shut off power to compressor for 180 seconds if voltage goes below 105 or above 126V. Every 180 seconds checks power and comes on when within correct range. All other lighting/motors remain on if there is sufficient power SURGE PROTECTOR 115V (RECOMMENDED OPTION) VDS16P HARDWIRE. PROTECTS COMPRESSOR ONLY. Shut off power to compressor for 180 seconds if voltage goes below 105 or above 126V. Every 180 seconds checks power and comes on when within correct range. All other lighting/motors remain on if there is sufficient power SURGE PROTECTOR 208V/220V/CE (RECOMMENDED OPTION) VDS16-P SOLLATEK HARDWIRED. PROTECTS COMPRESSOR ONLY SWITCH, LIGHT, ROCKER STYLE, 115V/208V/220V/CE D502J12 S2 ROCKER STYLE WITH MANUAL ON/OFF SWITCH, LIGHT, TOGGLE STYLE ALL VOLTAGES - TOGGLE STYLE Page 11

12 GDM SWITCH, POWER DISCONNECT, 208V/220VCE 2GK91-D-4B-B SWITCH, POWER, 115V HLB 11SP TO SHUT OFF POWER TO SERVICE TANK BACK, CENTER, BLACK ALUMINUM 60 7/16" X 20 5/16" TANK BACK, RIGHT OR LEFT BLACK ALUMINUM 60 3/8" X 27 3/16" TANK BACK, RIGHT OR LEFT WHITE ALUMINUM 60 3/8" X 27 3/16" TAPE, CABINET END REFURBISHING 1" X 49' TWO-WAY ADHESIVE TAPE TAPE, GLASS INSERT 3/8" X 36 YARDS TAPE, LIGHT, FILLER CHANNEL, IDL 1" X 60 YARD SILVER ALUMINUM TEMPSCRIBE, CHROMOTOGRAPHY 7.6" X 7.6" X 3.25"KT HR TO 7 DAY CLOCK DICKSON. CAN READ EITHER FAHRENHEIT OR CELSIUS BY MOVING BLACK DIP SWITCH LOCATED BEHIND CHART TEMPSCRIBE, CHROMOTOGRAPHY RJFZ HR TO 30 DAY RUSSTRACK(SQUARE) - USES ROLLED-STRIP PAPER(FACTORY INSTALLED). READS ONLY IN CELSIUS THERMOMETER, COOPER HANGING, DIAL TYPE, INTERIOR WILL SET ON SHELF THERMOMETER, DIGITAL, CELCIUS, 115V EXTERIOR 20DT-U-4-CO ROUND THERMOMETER WITH BUILT-IN TRANSFORMER FTHERMOMETER, DIGITAL, CELCIUS, 115V EXTERIOR, 20DT-U-04CO FACTORY INSTALLED ON CABINET. ROUND FACTORY INSTALLED THERMOMETER WITH BUILT-IN TRANSFORMER THERMOMETER, DIGITAL, CELSIUS, 208V/220V LED 20DT-U-5-CO ROUND THERMOMETER WITH BUILT IN THERM FTHERMOMETER, DIGITAL, CELSIUS, LED, 208/220V, FACTORY 20DT-UB ROUND THERMOMETER WITH BUILT IN THERM INSTALLED THERMOMETER, DIGITAL, CELSIUS, LED, OPTION 20DT-UB-18NB ROUND THERMOMETER. REQUIRES TRANSFORMER TO REGULATES VOLTAGE THERMOMETER, DIGITAL, CELSIUS, SOLAR, LCD 4-1/2"W X 1 2/16"25-SD-18NB NO LOGO 220V UK OPTION. RECTANGULAR THERMOMETER, DIGITAL, CELSIUS/FAHRENHEIT, SOLAR 2-1/4" X 2-1/4"56SD-F CAN SWITCH CELSIUS TO FAHRENHEIT ON BACK OF THERMOMETER. SQUARE SHAPED. INCLUDES: FACE DECAL AND PROBE FTHERMOMETER, DIGITAL, CELSIUS/FAHRENHEIT, SOLAR 2-1/4" X 2-1/4"56SD-F FACTORY INSTALLED ON CABINET. CAN SWITCH CELSIUS TO FAHRENHEIT. RECTANGULAR SHAPED. INCLUDES: FACE DECAL AND PROBE FTHERMOMETER, DIGITAL, FAHRENHEIT, 115V EXTERIOR, 20DT-U-04FO FACTORY INSTALLED ON CABINET. ROUND FACTORY INSTALLED THERMOMETER WITH BUILT-IN TRANSFORMER THERMOMETER, FAHRENHEIT/CELSIUS, TUBE TYPE TIMER, REVERSE CONDENSER FAN MOTOR, 115V/208V M V 60HZ 8 HR. REPLACES / TOOL, ADJUSTMENT, DANFOSS TEMPERATURE CONTROL T7 X 50MM USED TO CALIBRATED DANFOSS CONTROL TRUETRAC 4, 1 LITER 24 1/4"W X 22 1/8"D INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 6 ROWS HOLDS 36 BOTTLES TRUETRAC 4, 1 LITER, GDM-72, SET OF /4"W X 22 1/8"D INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 6 ROWS HOLDS 36 BOTTLES TRUETRAC 4, 12 OZ, IDL 24 1/4"W X 22 1/8"D - 2 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 8 ROWS HOLDS 64 CANS TRUETRAC 4, 12 OZ, IDL, SET OF /4"W X 22 1/8"D - 2 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 8 ROWS HOLDS 64 CANS TRUETRAC 4, 20 OZ, IDL 24 1/4"W X 22 1/8"D - 2 7/8" ROW WIDTH INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 49 BOTTLES TRUETRAC 4, 20 OZ, IDL, SET OF /4"W X 22 1/8"D - 2 7/8" ROW WIDTH INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 49 BOTTLES TRUETRAC 4, 300 ML, IDL 24 1/4"W X 22 1/8"D INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS TRUETRAC 4, 500 ML, IDL 24 1/4"W X 22 1/8"D INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS TRUETRAC II, 16 OZ, IDL 24 1/4"W X 23 1/2"D - 3 1/32" ROW W INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 49 BOTTLES TRUETRAC II, 16 OZ, IDL, SET OF /4"W X 23 1/2"D - 3 1/32" ROW W INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 49 BOTTLES TRUETRAC II, 16 OZ, NON-IDL 24 1/4"W X 23 1/2"D - 3 1/32" ROW W INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 48 BOTTLES TRUETRAC II, 16 OZ, NON-IDL, SET OF /4"W X 23 1/2"D - 3 1/32" ROW W INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 48 BOTTLES TRUETRAC II, 16 OZ, NON-IDL, SET OF /4"W X 23 1/2"D - 3 1/32" ROW W INCLUDES SLIDES, PRICING STRIP, RETAINER & SHELF CLIPS. 7 ROWS HOLDS 48 BOTTLES TRUETRAC III, 1 LITER, IDL 24 1/4"W X 22 1/8"D - 3 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIPS, RETAINER & SHELF CLIPS. 5 ROWS HOLDS 25 BOTTLES TRUETRAC III, 1 LITER, IDL, SET OF /4"W X 22 1/8"D - 3 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIPS, RETAINER & SHELF CLIPS. 5 ROWS HOLDS 25 BOTTLES TRUETRAC III, 1 LITER, NON-IDL 24 1/4"W X 23 1/2"D - 3 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIPS, RETAINER & SHELF W/NOTCH CLIPS. 5 ROWS HOLDS 25 BOTTLES TRUETRAC III, 1 LITER, NON-IDL, SET OF /4"W X 23 1/2"D - 3 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIPS, RETAINER & SHELF W/NOTCH CLIPS. 5 ROWS HOLDS 25 BOTTLES TRUETRAC III, 12 OZ, IDL 24 1/4"W X 22 1/8"D - 2 7/16" ROW WIDTH INCLUDES SLIDES, PRICING STRIPS, RETAINER & SHELF CLIPS. 8 ROWS HOLDS 64 CANS. Page 12