Frequently Asked Questions: Maytag (PD) washers, dryers & Stack Units
|
|
- Tamsyn Byrd
- 6 years ago
- Views:
Transcription
1 Frequently Asked Questions: Maytag (PD) washers, dryers & Stack Units Last Revision: November 2005
2 How to change the price of a wash cycle (PD)? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Maytag Washer is a PD model with an electronic screen How do I change the price of my wash cycles? a. Unlock the service Hatch on the top of the machine and remove as shown b. On the control panel (as shown) press the Woollens button: the display will change to show the 6 series as seen in the picture. c. The 6 is a program number. The second number shown represents the number of coins which make up the cycle price. In Australia, the value of the coin is 20 cent pieces (for Dual $1 and 20cent mechanisms) i.e.: 20cent X 16 pieces (as seen)= cycle price of $3.20 d. To increase the price of your cycle, press the permanent press button the appropriate number of times. i.e.: Your current wash is $3.20, and you want to increase to $4.00. Press permanent press button 4 times to increase the number on screen to 20 (as shown), making your price 20cent X 20 pieces = cycle price of $4.00 e. Once price is set, replace and lock the service hatch f. Most washers are factory set for only 1 standard price for every cycle type (Whites: Hot wash, Colours: Warm wash, Bright Colours: Cold Wash). If you have requested a 3 cycle price structure from the factory, you can adjust each individual cycle price. At step b. above, by pressing the Woollens button multiple times, your on screen display will show the words, Hot or Warm or Cold, depending on how many times you press woollens. Then follow the rest of the steps for each different cycle if required. *Please Note: if you make a mistake, you cannot cancel this change you just made. Follow the same steps above and change the settings to be as you prefer. The counter range is between is the max and will then revert back to 0 to begin counting again. The counter will only increase, so if you currently have it set at 20 and want to change to 18, you must keep pressing the permanent press button until the counter has reached the max and then reverted back past 0 and reaches 18 Page 2
3 How to change the price or time for dryer cycles? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: How do I change the price or the length of time for cycles on my Dryer? drying Be careful when adjusting this: if you make a change to the price it will affect the time. These 2 features are directly linked 1. Open the service hatch, and press the Permanent Press button to scroll through on screen display. The screen will show the 6 series which controls the number of coins required (cycle price) and the 7 series which changes the length of time for each dry cycle 2. 6 series: the second number in this display is the number of 20 cent coins required for a cycle. i.e.: If the screen shows this means 10 X 20cent coins = $2.00 per dry cycle 3. 7 series: the second number in this display controls the length of the cycle COMBINED together with the number of coins from the 6 series. i.e.: If the screen shows this means that 10 (from above) X 3 = 30 minute $2.00 /cycle. If you adjust your price to read 6 12 ($2.40/cycle), it will then adjust the time as well: 12 X 3, cycle now = 36 $2.40 If you adjust your price to read 6 15 ($3.00/cycle), you could adjust your time back to 2 to stay at a 30 minute cycle: 15 X 2, cycle now = 30 $3.00 Page 3
4 How to begin a wash cycle without coins? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: I want to do my own washing without paying for it: How can I start a wash cycle without using any coins? a. Unlock the service hatch on the top of the machine and remove as shown b. On the control panel (as shown) press the Delicates & Knits button for approx 3 seconds and then press Permanent Press once: the display will change to show CC as seen in below c. Now replace the service hatch and the display will change to display 0 minutes left as seen in this picture d. Now open the machine lid or front door, select your cycle and fill as normal. This method gives you a complete cycle for free Q: I want to run a quick service check to make sure my washer is functioning properly? a. Unlock the service hatch on the top of the machine and remove as shown b. On the control panel (as shown) press the Delicates & Knits button for approx 3 seconds and then press Woollens once: this will run through a quick diagnostic service check. If any errors are present they will display on screen, and please refer to your original Instructions manual Page 4
5 When the service hatch is open, what do the numbers on the display mean? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: What do the numbers on the screen mean when the service hatch is open and the display is in programming mode? There are several options available here, but your display will depend on what settings you have requested from the factory. Available options are a Cycle Count option, and a Money Count option. If neither of these options have been requested, your machine will display the default factory preset 1. If you have NOT requested either extra option to be preset, when you open your service hatch, the screen will default to the 6 series. For further information, see FAQ document Change Wash Cycle Pricing 2. If you have the Cycle Count option activated, your display will change between the 1 series and 2 series display. These two combined, show you how many cycles your washer has completed. From these two displays, take the second number from each and combine to show the cycle count. I.e.: from 1 take the 15 and from 2 take the 64 and combine. This washer has completed 1564 Wash cycles. 3. If you have the Money Counter activated, your display will change between the 3, 4, and 5 series display s. These three combined will display how much income has been generated by this machine. From these three displays, take the second number from each and combine to show the Money count. I.e.: from 3 take the 42 and from 4 take the 48 and from 5 take the 80 and combine. This washer has collected $ in revenue. Please be aware that once either of these counters have been activated, they cannot be de-activated 5. To move through any of these display options (when activated), press the Woollens button Page 5
6 What does it mean if the rinse cycle does not complete properly? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Maytag Washer will run through the wash part of the cycle but the rinse part of the cycle does not complete properly? Water temperature description for all wash cycles: Whites: Hot wash, cold rinse Colours: Warm wash, cold rinse Bright Colours: Cold wash, cold rinse a. Cold water is used for every rinse cycle, regardless of the wash cycle chosen. b. Check your cold water tap to make sure you it is turned on and is flowing to the washer. If the water supply is working properly, it is likely that the water valve has an internal problem. **Please phone us for a service appointment immediately on Page 6
7 How to reset the machine when the display shows 0 minutes and will not reset? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: What does it mean when after the cycle has finished, I have opened the door, but the display shows 0 minutes and does not reset? 1. This means that the lid switch or door switch (depending on model) is stuck. On washing machines, it can get stuck if there is a build up of soap. To release the switch, simply clean away the excess soap, or spray some CRC into that spot to release the button Top Load Washer Front Load Washer Front Load Dryer Switch Placement The lid switch (or door switch) acts as a reset for the digital display. At the end of a cycle, this button is normally released when the door is opened to remove clothing, and then depressed when the door is closed. If that sequence does not happen, the digital display will not reset and will stay showing 0 minutes left Page 7
8 What does it mean if the display panel is flashing? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: What does it mean if the display panel is flashing? 1. This means that the money box is not completely secure. There is a switch inside the rear of the coin housing which must be pressed by the back of the coin box. When the money box was last emptied, it has not been put back into place properly and has not pushed in the switch. Remove the box and re-insert, making sure it is securely replaced. Upon doing this, the screen will revert back to the normal display Page 8
9 How long is the warranty on my machine? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: How long is the Warranty on my machine? Primus Washer and Dryer 12 Months Labour* 36 Months Parts* Primus Ironer 6 Months Labour* 12 Months Parts* Maytag Commercial 12 Months Labour* 60 Months Parts* Ghidini Finishing Equipment 6 Months Labour* 12 Months Parts* Reconditioned Equipment 1 Months Parts and Labour* * All warranty is subject to the following conditions: 1. All warranty claims are at the discretion of Richard Jay Laundry Equipment Pty Ltd. 2. The customer is not authorized to arrange repair work. All warranty claims must be directed to Richard Jay Laundry Equipment Pty Ltd. 3. Where repair work is required for items located outside the metropolitan area the customer is responsible for all travel and freight costs incurred to repair the items. 4. The company s liability ceases if the equipment is repaired or interfered with by any person other than those authorized by Richard Jay Laundry Equipment Pty Ltd. All warranty work is to be carried out by authorized persons only. 5. Warranty will not be covered for faults caused by the incorrect installation of machinery. All machinery must be installed in accordance with the manufacturers recommendations. 6. Warranty will only be provided for faults caused by normal wear and tear for the specified period of time from date of purchase. 7. Warranty will not be provided for any faults caused by damage (other than normal wear and tear) including vandalism, acts of malicious damage, misuse and lack of maintenance. 8. Warranty will not be honoured unless full payment for equipment has been received. 9. All warranty repair work will be carried out during normal working hours. Any work outside of normal hours will result in the associated costs being born by the customer. 10. Coin jams are not covered by warranty. 11. Pump blockages are not covered by warranty. 12. Failure to carry out preventative maintenance in accordance with manufacturer s specifications could result in warranty being void. 13. Consumable items including (but not limited to) the following are not covered by warranty: Lint screens Ironer Covers Roller ribbons Steam inlet valves Gasket and washers Drain valve seals Water heating elements Water inlet valves Rubber Parts (eg. door seals, belts etc) 14. Warranty will not be provided for any faults to machinery caused by chemical damage due to spillage, incorrect installation or misuse. 15. Reprogramming, change of price or any variations to the microprocessor is excluded from the warranty. 16. Faults caused by power, water or gas interruptions are not covered by warranty. For all your warranty, service and spare parts please contact the Richard Jay After Sales Department Phone 1300 RICHARD ( ) Fax Web service@richardjay.com.au or spareparts@richardjay.com.au Page 9
10 What does the error code mean on my front load washer? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Front Load Washer display is showing an error code when I open the service hatch what does it mean? After opening the service Hatch on the top of the machine, the control panel shows an error code. These are all listed below: d4 Washer door sensor error on control board (cycles and customer display disabled until error code is manually cleared) d5 Blocked coin 1 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) d7 Slow fill detected during previous cycle (cycle paused but can be restarted) - Check the water taps to make sure they are turned on properly d8 Last drain was slow - Check for a blockage in your drain d9 Low voltage detected for more than 8 seconds d10 Door lock sensor error (spins inhibited until corrected) d11 Motor speed error detected (cycle paused but can be restarted) d13 Blocked coin 2 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) d17 Door not locked (cycle paused but can be restarted *If you see any of these error codes, unless otherwise mentioned, press and hold Delicates & Knits button for approx 3 seconds. This will reset the machine. If the error appears again after the reset, please call our After Sales Department on 1300 RICHARD ( ) Page 10
11 What does the error code mean on my single-load dryer? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Single Load Dryer display is showing an error code when I open the service hatch what does it mean? After opening the service Hatch on the top of the machine, the control panel shows an error code. These are all listed below: d1 Dryer door sense error on control board or due to power line interference (cycles and price display disabled until error code is manually cleared) d4 Dryer motor control circuit error (cycles and customer display disabled until error code is manually cleared) d5 Blocked coin 1 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) d9 Voltage detected below 90vac for 8 seconds d12 Motor sense error on control board or due to power line interference (cycles and customer display disabled until error code is manually cleared) d13 Blocked coin 2 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) *If you see any of these error codes, unless otherwise mentioned, press and hold Delicates & Knits button for approx 3 seconds. This will reset the machine. If the error appears again after the reset, please call our After Sales Department on 1300 RICHARD ( ) Page 11
12 What does the error code mean on my stack washer & dryer? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Stack Washer & Dryer display is showing an error code when I turn the access panel key what does it mean? After opening the access panel on the front of the machine, the control panel shows an error code. These are all listed below: d1 d2 d4 d5 Dryer door sense error on control board or due to power line interference (dryer cycles and dryer display disabled until diagnostic code is manually cleared) Washer door sense error on control board or due to power line interference (washer cycles and display disabled until diagnostic code is manually cleared) Dryer motor circuit error (dryer cycles and dryer display disabled until diagnostic code is manually cleared) Blocked coin 1 or coin drop control circuit failure (coin recognition and entire display disabled while blockage persists) d7 d8 d9 d10 d11 d12 d13 Slow fill detected during previous cycle (washer cycle paused but can be re-started) Last drain was slow Voltage detected below 90vac for 8 seconds Washer door lock sense error or due to power line interference (washer spins inhibited until corrected) Washer motor speed error detected (washer cycle paused but can be re-started) Dryer motor sense error on control board or due to power line interference (dryer cycles and display disabled until diagnostic code is manually cleared) Blocked coin 2 or coin drop control circuit failure (coin recognition and entire display disabled while blockage persists) *If you see any of these error codes, unless otherwise mentioned, press and hold Delicates & Knits button for approx 3 seconds. This will reset the machine. If the error appears again after the reset, please call our After Sales Department on 1300 RICHARD ( ) Page 12
13 What does the error code mean on my stack dryer? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Stack Dryer display is showing an error code when I turn the access panel key what does it mean? After opening the access panel on the front of the machine, the control panel shows an error code. These are all listed below: d2 d3 d4 d5 Lower dryer thermistor circuit error on control board (cycles disabled on the lower machine until error code is manually cleared) Lower dryer temperature too high (cycles disabled on the lower machine until error code is manually cleared) Lower dryer motor control circuit error (lower dryer cycles and lower display disabled until error code is manually cleared) Blocked coin 1 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) d9 d12 d13 Voltage detected below 90vac for 8 seconds Lower dryer motor sense error on control board or due to power line interference (lower cycles and lower dryer display disabled until error code is manually cleared) Blocked coin 2 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) d14 d18 d19 d20 Upper dryer motor sense error on control board or due to power line interference (upper cycles and upper dryer display disabled until error code is manually cleared) Upper dryer thermistor circuit error on control board (cycles disabled on the upper machine until error code is manually cleared) Upper dryer temperature too high (cycles disabled on the upper machine until error code is manually cleared) Upper dryer motor control circuit error (upper dryer cycles and upper display disabled until error code is manually cleared) *If you see any of these error codes, unless otherwise mentioned, press and hold Delicates & Knits button for approx 3 seconds. This will reset the machine. If the error appears again after the reset, please call our After Sales Department on 1300 RICHARD ( ) Page 13
14 What does the error code mean on my top-load washer? This brief manual will answer the most commonly asked questions we receive for the Maytag product range. If this does not answer your question, please phone our National After Sales Department on 1300 RICHARD ( ). Q: My Top Load Washer display is showing an error code when I open the service hatch what does it mean? After opening the service Hatch on the top of the machine, the control panel shows an error code. These are all listed below: d1 Water level detection error on control board (cycles and customer display disabled until error code is manually cleared) d4 Washer lid sense error on control board (cycles and customer display disabled until error code is manually cleared) d5 Blocked coin 1 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) d7 Last drain was slow - Check for a blockage in your drain d8 Last drain occurring during final spin was slow d9 Voltage detected below 90 vac for 8 seconds d12 Motor sense error detected on control board d13 Blocked coin 2 or coin drop control circuit failure (coin recognition and price display disabled while blockage persists) *If you see any of these error codes, unless otherwise mentioned, press and hold Delicates & Knits button for approx 3 seconds. This will reset the machine. If the error appears again after the reset, please call our After Sales Department on 1300 RICHARD ( ) Page 14
Retailer Sales Information Folder
Retailer Sales Information Folder 1300 RICHARD (742 427) www.richardjay.com.au Retailer Sales Information Folder Washing Machine Comparison Coin-Operated Manual -------------- Dryer Comparison --------------
More informationHigh-Efficiency Front-Load Washer
This General Manual is intended purely as a Guideline and must be used in conjunction with the original training material for Eurostar and Access. It is not intended to give the same level of Technical
More informationMODEL T900/950 60LB CAPACITY COMPUTER CONTROL COIN WASHER
P/N 8514-183-001B MODEL T900/950 60LB CAPACITY COMPUTER CONTROL COIN WASHER DEXTER LAUNDRY, INC. OWNER'S BOOKLET INSTALLATION & OPERATION INSTRUCTIONS Please read this information and retain for reference.
More informationUSER MANUAL. Adventure Kings 50L Refrigerator
Adventure Kings 50L Refrigerator USER MANUAL Please read and understand these instructions and the safety information section before using your refrigerator. CONTENTS Safety Information 1 Notes on using
More informationOPERATING INSTRUCTIONS FOR: MODEL: TGO-80W, 150W, 240W GLASSWARE DRYING OVEN
OPERATING INSTRUCTIONS FOR: MODEL: TGO-80W, 150W, 240W GLASSWARE DRYING OVEN Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill
More informationM U L T I - H YT O U S I N G
AYTAG MULTI-HOUSING MULTI- HOUSING LAUNDRY STACK up on SOLUTIONS. Let s face it running a multiple-housing laundry facility can be a challenge. But Maytag can help make your job easier. To begin with,
More informationCOMMERCIAL WASHERS MODELS T-300/350/400/450/600/650/750/900/950/1200/1450 VENDED C-SERIES CONTROL
COMMERCIAL WASHERS MODELS T-300/350/400/450/600/650/750/900/950/1200/1450 VENDED C-SERIES CONTROL OPERATOR S MANUAL INSTALLATION & OPERATION INSTRUCTIONS Please read this information and retain for reference.
More informationDryer Controller M720
User Manual Dryer Controller M720 Hardware version 2.00 Software version 2.00 Manual M720 Dryer controller Page 1 of 60 Document history Preliminary version: - Created in April, 2009 Hardware Version 2.00,
More informationMaytag Services Training Bulletin
Maytag Services Training Bulletin Product: New Electronic Control Date: August 1, 2005 IntelliDial Electronic Laundry Controls A new line of electronic controls, IntelliDial, hits the Sales Floor in August.
More informationDEXTER STACK DRYER PROGRAMMING PROCEDURES AND FEATURES
DEXTER STACK DRYER PROGRAMMING PROCEDURES AND FEATURES DESCRIPTION OF CONTROL The single electronic control unit controls all coin counting, timing, temperature control and displaying of information for
More informationInstallation and Setup
NFORMATION NO: 007 Self Fill Lavazza Colibri with changegiver Congratulations on choosing to drink great coffee using the unique Lavazza pod vending system. The machine is easy to use. Follow the simple
More informationTraditional Coin-Operated
Traditional Coin-Operated WASHERS DRYERS Available models - simple 3 cycle or fully programmable with multi-level pricing Optional deep water wash & rinse Extra large lid opening/heavy duty cabinet High
More informationPneumatic Heat Press. Revision: 3 Operators Manual
Pneumatic Heat Press Revision: 3 Operators Manual Wader Labelling Systems Ltd 2003 Location and Set-up. The press must be located near to a filtered air supply and a 240v singlephase mains supply. Ensure
More informationInstruction Manual. By Evakool. Please read these instructions and the Safety section carefully before using your refrigerator.
Nexberg Pty Ltd T/a Evakool 16 Enterprise St CALOUNDRA QLD 4551 Tel : 07 5492 7777 Fax : 07 5492 7733 Please read these instructions and the Safety section carefully before using your refrigerator. 1.Safety
More informationInstruction Manual. Please read these instructions and the Safety section carefully before using your refrigerator.
Nexberg Pty Ltd T/a Evakool 16 Enterprise St CALOUNDRA QLD 4551 Tel : 07 5492 7777 Fax : 07 5492 7733 Please read these instructions and the Safety section carefully before using your refrigerator. 1.Safety
More informationCONTROL PANEL. 3.1 Control Panel Description. Spin Touchpad ( ) Program Touchpads ( ) Temperature Touchpad ( ) Option Touchpad ( ) 1 On/Off Button ( )
CONTROL PANEL 3.1 Control Panel Description ENGLISH NOTE: For model this option replaced by Easy Iron program. 1 2 3 9 4 10 5 7 6 8 * Picture of control panel model: EWF12843 1 On/Off Button ( ) 2 On/Off
More informationParts Identification and Accessories Safety Information Installation Control Panel Layout Fully Automatic Washing...
INDEX Parts Identification and Accessories.................................... 2 Safety Information................................................. 3 Installation.......................................................
More information! WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power.
24 Front Load Washer Technical Information MAH2400A* Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit. Refer to Service
More informationDrying Cabinet With Timer
Malmet (Australia) Pty Ltd Head Office & Customer Service 9-11 McKay Avenue PO Box 373 LEETON NSW 2705 Phone: (02) 6953 7677 Email: inquiries@malmet-aus.com.au ABN 95 001 717 791 Operation, Maintenance
More informationUSER MANUAL. Adventure Kings WiFi Refrigerator
Adventure Kings WiFi Refrigerator USER MANUAL Please read and understand these instructions and the safety information section before using your refrigerator. CONTENTS Safety Information 1 Notes on using
More informationThe Professional s Choice
SureFlow compact range: 1000-C & 1000-M Auto-Fill Catering Water Boiler Installation And User Instructions The Professional s Choice CONTENTS CONTENTS & INTRODUCTION 2 SAFETY & ENVIRONMENTAL INFORMATION
More informationWC Series Vended Washers Troubleshooting, and Fault Codes
WC Series Vended Washers Troubleshooting, and Codes 1 Common Troubleshooting s Symptom Probable Cause Suggested Remedy 2 Machine does not start Machine will not accept and count coins Door does not lock
More informationProduct Manual. Argon (AMC 1020)
Product Manual Argon (AMC 1020) CONTACT US: Forme Medical Pty Ltd 11 Frankston Gardens Drive, Carrum Downs, Victoria 3201 AUSTRALIA Phone: 03 9708 2661 Web: www.formemedical.com.au ABN: 48 154 618 014
More informationTable of Contents. Forward Quality Policy Design Parameters Section A Unit Operation Setting the Timer...
Table of Contents Forward... 3 Quality Policy... 3 Design Parameters... 4 Section A Unit Operation... 5 Setting the Timer... 6 Typical Loading System... 8 Section B Unit Maintenance... 9 Trouble Shooting
More informationUser Manual. Dryer Controller M720
User Manual Dryer Controller M720 Hardware version 1.00 Software version 1.00 Preliminary version Manual M720 Dryer controller Page 1 of 42 Document history Preliminary version: - Created in April, 2009
More informationOperating manual. Wascator FOM71 CLS
Operating manual Wascator FOM71 CLS Operating manual in original language 438 9200-91/EN 2010.05.03 Register now And be able to join the Wascator FOM 71 CLS web site where you can find: General information
More informationTRAVELMATE FRIDGE FREEZER Instruction Manual
Nexberg Pty Ltd T/a Evakool 16 Enterprise St CALOUNDRA QLD 4551 Tel : 07 5492 7777 Fax : 07 5492 7733 Please read these instructions and the Safety section carefully before using your refrigerator. 1.Safety
More informationOperating, Installation and Service Manual W3400H, CLC 41 Clarus Control
Operating, Installation and Service Manual W3400H, CLC 41 Clarus Control 438 9202-01 05.26 Washer extractor, drum volume 400 litres 3 Contents Machine operation... 7 General description... 7 Automatic
More information! WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
27 Domestic Dryer Technical Information MDE6700A*, MDG6700A* Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit. Refer
More informationVC10LPH with HEPA Filter & Disposable Dust Bag
Instruction Manual HOUSEMAID 10 Litre Plastic Dry Vacuum Cleaner Models: VC10LP with Cloth Filter only VC10LPH with HEPA Filter & Disposable Dust Bag Please read this Instruction Manual carefully and follow
More informationGROUP OF COMPANIES. MERLIN STEALTH Electric Fence Energizer. Users Manual
GROUP OF COMPANIES MERLIN STEALTH Electric Fence Energizer Users Manual Revision 1.2 20 July 2011 : USERS MANUAL March 2007 Table of Contents FOREWORD.... 3 GUARANTEE.... 4 INTRODUCTION.. 5 OPERATION WITHOUT
More informationPRODUCTS. Operating Manual
PRODUCTS Operating Manual 4.1 Loading the film 4.2 Setting the machine parameters 4.3 Adjusting the operator settings 4.3.1 Adjusting heat seal and blower settings 4.3.2 Adjusting number of cushions 4.4
More informationTRAVELMATE. Instruction Manual
Nexberg Pty Ltd T/a Evakool 16 Enterprise St CALOUNDRA QLD 4551 Tel : 07 5492 7777 Fax : 07 5492 7733 Please read these instructions and the Safety Instructions carefully before using your refrigerator.
More informationService manual. Type: TD25. Contents
Service manual Type: TD25 Contents Introduction...3 Type overview...4 Programme...5 Indication of programme sequence...5 Options and settings...6 Variant settings...8 Test programme...9 Troubleshooting...11
More informationINSTALLATION AND MAINTENANCE GUIDE TRENDY 1000 T ELECTRONIC LAVATORY FAUCET
INSTALLATION AND MAINTENANCE GUIDE TRENDY 1000 T ELECTRONIC LAVATORY FAUCET 1 INDEX 1 TECHNICAL DATA 2 TEMPERATURE ALTERNATIVES 3 PACK CONTENTS 4 PRE-INSTALLATION INFO 5-6 FAUCET INSTALLATION 7 ADJUSTING
More informationMDC. Programming. Tumble Dryers Refer to Page 4 for Model Numbers
MDC Tumble Dryers Refer to Page 4 for Model Numbers Programming DRY570R DRY570R Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part
More informationIon Endeavor Pump Controller Digital Level Control with Pump Alternation and High Water Alarm
Ion Endeavor Controller Digital Level Control with Alternation Page 1 of 8 General Overview The Ion Endeavor is a pump controller that senses a water level of up to 72", has a configurable water level/pump
More informationKELCO F29 PROGRAMMABLE FLOW SWITCH
KELCO F29 PROGRAMMABLE FLOW SWITCH PROGRAMMING INSTRUCTIONS Version 010916 KELCO Engineering Pty Ltd Sydney Australia www.kelco.com.au VERY IMPORTANT This Kelco controller has been fully tested and calibrated.
More informationETLW7. Product: 7kg Top Load Washing Machine. User Manual
User Model Manual: Code/s: ETLW7 Product: 7kg Top Load Washing Machine Document: 1 User Manual Dear Customer, Congratulations on purchasing your washing machine. The Esatto brand is proudly distributed
More informationSECTION 9 - DRYER CONTROLS OVERVIEW... 9-1 DRYER CONTROLS OVERVIEW... 9-1 BASIC CONTROL BOARD PHILOSOPHY FOR BOTH DRYERS... 9-1 BASIC MACHINE OPERATION... 9-2 LED DRYER CONTROL SELECTIONS... 9-3 DRYER
More informationINSTALLATION / OPERATING INSTRUCTIONS
Model 6000 Advanced Microprocessor Room Control INSTALLATION / OPERATING INSTRUCTIONS 1 2 3 4 5 6 7 MODEL 6000 ADVANCED MICROPROCESSOR ROOM CONTROL STATUS STAGE 1 STAGE 2 STAGE 3 STAGE 4 STAGE 5 8 9 10
More informationOWNER S MANUAL IMPORTANT - INSTALLER MUST COMPLETE FOR WARRANTY PURPOSES. Made in Western Australia by:
OWNER S MANUAL QA AUTO CONTROLLER QM MANUAL CONTROLLER IMPORTANT - INSTALLER MUST COMPLETE FOR WARRANTY PURPOSES Model: Installation Date: Dealer: Serial Number: Installed by: Invoice No: Made in Western
More informationDryer Troubleshooting Guide
Dryer Troubleshooting Guide NORMAL SOUNDS YOU MAY HEAR The following sounds may be heard while your dryer is operating. They are normal. Humming: It is normal for the dryer to hum due to the high velocity
More informationINSTALLATION AND OPERATION INSTRUCTIONS
MODEL: RCT-MLT III INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE This remote control system
More informationNookBox Installation Guide Keypad. Installation Guide. NookBox Keypad (P / E )
1 Installation Guide NookBox Keypad (P119010 / E6309744) 2 NookBox Keypad (P119010 / E6309744) 3 Parts Identification 1. Active LED 2. Status LED 3. Fault Display LED 4. Arm Key 5. Home Key 6. Key Check
More informationTECHNICAL INFORMATION Touchtronic Clothes Dryers
TECHNICAL INFORMATION Touchtronic Clothes Dryers Includes: T1302, T1303, T1322, T1329ci T1403 & T1405 2004 Miele This page intentionally left blank. Table of Contents GENERAL INFORMATION A. Warning and
More informationThe Professional s Choice
CPF Series Models: CPF2100, CPF210, CPF310, CPF4100-3, CPF4100-6 & CPF6100 Auto-Fill Catering Water Boiler With Integrated Multi-Filter Installation And User Instructions The Professional s Choice INSTANTA
More informationTable of Contents. Introduction Page 2. Important Contact Numbers. Page 3. Job Description.. Page 4. Operating a Top load (home use) washer.
Table of Contents * Use the Official Coinwash.com Employee Handbook as your company s guide to creating the first communication with your new employees to reduce the repetitive questions that new hires
More informationUser Guide Digital Bill Counter AB4000
User Guide Digital Bill Counter AB4000 Warning Before turning the power on, please make sure there are no objects obstructing the operation of the rollers and wheels. Operate the machine only under normal
More informationMemcom Emergency Telephone
Memcom Emergency Telephone Installation Guide Ref No. 450 900 (GB) Version 2 + + Simple wiring for quick installation + + Integrated LCD display shows you what you have programmed + + All code based programming
More informationTable of Contents. Forward Quality Policy Design Parameters Section A Unit Operation Section B Unit Maintenance...
Table of Contents Forward... 3 Quality Policy... 3 Design Parameters... 4 Section A Unit Operation... 5 Section B Unit Maintenance... 6 Trouble Shooting Guide... 6 Wiring Diagram... 7 Section C Unit Installation...
More informationThe Professional s Choice
DB2000 Push Button Dispense Boiler Installation And User Instructions The Professional s Choice CONTENTS CONTENTS & INTRODUCTION 2 SAFETY INFORMATION 2 ENVIRONMENTAL INFORMATION & DELIVERY CHECKLIST 3
More informationVADA - Rain2Main Automatic Rainwater Controller
PRODUCT OVERVIEW / APPLICATION The Vada Rain2Main is designed to select between stored rainwater (when available) and mains supply water, and send this water to your toilet cistern, washing machine, garden
More informationSAT-3 Room Temperature Controller
SAT-3 Room Temperature Controller USER S OPERATING INSTRUCTIONS Contents Introduction 5 Features Summary 5 Operation 7 On/Off 7 Room Temperature Adjustment 7 Operating Mode Selection 8 Fan Speed Selection
More information! WARNING To avoid risk of electrical shock, personal injury or death; disconnect power before servicing, unless testing requires power.
Top Load Washer Technical Information FAV6800A*, FAV7500A* Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit. Refer
More informationPERSONAL CUEING DEVICE MODEL NO. BDAAU100 INSTRUCTION MANUAL.
PERSONAL CUEING DEVICE MODEL NO. BDAAU100 INSTRUCTION MANUAL www.agilitas.com.au CONTENTS Device Information 3 Safety Information 3 Features 5 Set up 6 Operation 7 Sensitivity Adjustment 8 Charging 10
More informationOwner s Guide and. Gas Continuous Flow Water Heater 27L Gas Water Heater 874 & 872 Series, 627 Models
Owner s Guide and Installation Instructions Gas Continuous Flow Water Heater 27L Gas Water Heater 874 & 872 Series, 627 Models This water heater must be installed and serviced by an authorised person.
More informationGTW680BMMDG. Item SKU Dimensions W x H x D KEY FEATURES, ADVANTAGES & BENEFITS
GTW680BMMDG Washer 155-68021 26 7/8 x 43.5 x 26 5/8 Circuclean This waterfall combines with a recirculation pump to move water and detergent through clothes Loads receive thorough coverage Precise Fill
More informationCommissioning, Programme chart and Settings PT 7137 WP Vario
Commissioning, Programme chart and Settings PT 7137 WP Vario en-gb To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used
More informationAQUARIUS 45 MARINE SERVICE MANUAL
AQUARIUS 45 MARINE SERVICE MANUAL CONTENTS: PAGE 1. INTRODUCTION 3 2. SAFETY INSTRUCTIONS 4 3. BASIC INSTRUCTIONS 5 3.1. Installation Details 5 3.2. Operating the Boiler for the First Time 6 3.3. Troubleshooting
More informationOperation, Maintenance and Installation Manual
Malmet (Australia) Pty Ltd Head Office & Customer Service 9-11 McKay Avenue PO Box 373 LEETON NSW 2705 Phone: +61 2 6953 7677 Email: info@malmet.com.au ABN 95 001 717 791 Drying Cabinet Operation, Maintenance
More informationMira Vision Wireless Controller
Mira Vision Wireless Controller These instructions must be left with the user User Guide 1 128684-A2-A CONTENTS Introduction...3 Safety Information...3 Control Layout...4 Display Symbols...5 Using the
More informationMACHINE OPERATION. Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for Use.
MACHINE OPERATION Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for Use. Sort laundry according to care symbols Do not tumble
More informationProdigy Plus - D Series Cuber Technical Review
Prodigy Plus - D Series Cuber Technical Review Water Distributor Control Panel Air Filter ice Thickness Sensor Lower Light and Switch Panel Water Pump Water Level Sensor & Guard Curtain Switch and Magnet
More informationOPERATING INSTRUCTIONS FOR:
OPERATING INSTRUCTIONS FOR: MODEL: BL-30 & BL-130 REFRIGERATED BATH Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill Park DC
More informationPhase 8.3 and 8.4 Rev 2.2 and Rev 2.3 Microprocessor User s Manual
Phase 8.3 and 8.4 Rev 2.2 and Rev 2.3 Microprocessor User s Manual American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail:
More informationWITH OMRON E5CC CONTROL
LABORATORY OVENS, FAN FORCED & GRAVITY CONVECTION. MODELS: TO-152G & TOH-152G TO-152F, TOH-152F & TO-235F TO-330F & TO-500F WITH OMRON E5CC CONTROL Thermoline Scientific Equipment Pty. Ltd. T/A Thermoline
More informationMACHINE OPERATION. Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for Use.
MACHINE OPERATION Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for Use. Sort laundry according to care symbols Do not tumble
More informationUser Manual. Tumble Dryer ZDC8202P
EN User Manual Tumble Dryer ZDC80P Contents Safety information Safety instructions 3 Product Description 4 Control Panel 5 Programme table 5 Options 6 Settings 7 Before First Use 8 Daily Use 8 Hints and
More informationRead installation manual prior to installation of this appliance! Read user manual before putting this unit in operation!
6720808877-00.1V Gas continuous flow water heaters OptiFlow Professional GWH12 1 CTD E23/31 F3 OL Operating Manual 6 720 813 938 (2016/06) AU Read installation manual prior to installation of this appliance!
More informationSERVICE MANUAL WASHING WM-WD. Front loader. Platform. EWM1000 EWM1000plus EWM2000evo EWM3000new ENV06 11xx21xx 25xx/35xx
SERVICE MANUAL WASHING WM-WD ELECTROLUX ITALIA S.p.A. Spares Operations Italy Publication no. Corso Lino Zanussi, 30 I - 33080 PORCIA /PN (ITALY) 599 72 40-80 Fax +39 0434 394096 Edition: 12-2009 EN Front
More informationMachine operation. Additional information (including troubleshooting and service) can be found in the individual sections of the Instructions For Use.
Machine operation Additional information (including troubleshooting and service) can be found in the individual sections of the Instructions For Use. Sort laundry according to care symbols Do not tumble
More informationOPERATING INSTRUCTIONS. Drying cabinet DC 7774 DC Read the instructions before using the machine.
OPERATING INSTRUCTIONS Drying cabinet DC 7774 DC 7784 Read the instructions before using the machine. Dear ASKO customer, Congratulations on making an excellent choice, and welcome to the ASKO family,
More informationMODEL NO RUSSELL HOBBS APOLLO 1.8L DIGITAL FILTER COFFEE MAKER
INSTRUCTIONS AND WARRANTY MODEL NO. 18593 RUSSELL HOBBS APOLLO 1.8L DIGITAL FILTER COFFEE MAKER Congratulations on purchasing our Russell Hobbs Apollo 1.8L Digital Filter Coffee Maker. Each unit is manufactured
More information2000 WATT CYCLONIC BAGLESS VACUUM CLEANER
Instruction Manual 2000 WATT CYCLONIC BAGLESS VACUUM CLEANER Model Rated Voltage (V) Rated Frequency (Hz) Rated Power (W) V0409 220-240 V 50 Hz 2000 Watts Model: V0409 Please read this Instruction Manual
More informationCustom Control Systems Inc. Ellis Dryer Control Configuration and Operation Manual
Ellis Dryer Control Configuration and Operation Manual Revised 1/19/2004 Table of Contents 1 Introduction... 7 1.1 Hardware Specifications... 7 1.2 Software Features... 7 1.3 Warranty... 8 1.3.1 Terms...
More informationInstuction Booklet. 4 Slice Toaster - TA9400 / Slice Toaster - TA9200 / 9205
4 Slice Toaster - TA9400 / 9405 Slice Toaster - TA900 / 905 Instuction Booklet Please read these instructions carefully and retain for future reference TA9400_TA9405_17EM.indd 1 5/10/17 10:35 Contents
More informationInstuction Booklet. 4 Slice Toaster - TA9400 / Slice Toaster - TA9200 / 9205
4 Slice Toaster - TA9400 / 9405 2 Slice Toaster - TA9200 / 9205 Instuction Booklet Please read these instructions carefully and retain for future reference Contents Sunbeam s Safety Precautions 2 Features
More informationCOMMERCIAL WASHER MODEL T-600 VENDED C-SERIES CONTROL 50 Hz
COMMERCIAL WASHER MODEL T-600 VENDED C-SERIES CONTROL 50 Hz OPERATOR S MANUAL INSTALLATION & OPERATION INSTRUCTIONS Please read this information and retain for reference. WARNING - THIS WASHER IS EQUIPPED
More informationWFR 2460 Service Tips -- Test Program
WFR 2460 Service Tips -- Test Program The last 8 fault codes are stored & displayed! HINT: # of errors reads 0 for faults which didn t occur. Look at # of errors, not error #, to see if faults occurred.
More informationPHASE DMC USER S MANUAL
PHASE 7.4.2 DMC USER S MANUAL American Dryer Corporation 88 Currant Road, Fall River MA 02720-4781 USA Telephone: +1 (269) 923-3000 / Fax: +1 (508) 678-9447 e-mail: mdl-service@whirlpool.com / www.adclaundry.com
More informationWhirlpool Duet Need A Manual Dryer Control Lock Stuck
Whirlpool Duet Need A Manual Dryer Control Lock Stuck The troubleshooting guide indicated a faulty main control board so we ordered one. Whirlpool duet dryer wouldn't turn on James C. Tallahassee, FL I
More informationIon Genesis II Pump Controller Digital Level Control with Pump Alternation and High Water Alarm
Page 1 of 8 General Overview Thank you for purchasing an Ion Genesis controller. Take the time to read the instructions carefully before using this appliance. We strongly recommend that you keep this instruction
More informationLABORATORY ILLUMINATED FLOTATION BATH
LABORATORY ILLUMINATED FLOTATION BATH MODELS INCLUDE: TFB-1 Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 6862 Wetherill Park DC NSW 1851
More informationSpas with 2 or 3 Pumps
Topside Control Instructions for Spas with 2 or 3 Pumps 15bp501tp60102 1 Programming Menu Sequence 2 Powering on Your Spa After filling the spa through the filter assembly to the correct level remove the
More informationNV800ANZ. Series INSTRUCTIONS AUST: NZ:
NV800ANZ Series INSTRUCTIONS AUST: 1800 890 840 NZ: 0800 002 999 THANK YOU for purchasing the Shark Powered Lift-Away DuoClean TIP: You can find the model number on the rating label located on the back
More informationINSTRUCTION MANUAL. Washing machine BT608LA
INSTRUCTION MANUAL Washing machine BT608LA This appliance has been designed exclusively for domestic use for washing linen. Very important : Read this user guide before installing and using this appliance.
More informationAdam Equipment. NCSA 20plus. (P.N Revision B - September 2012)
Adam Equipment NCSA 20plus (P.N. 7.00.6.6.0240 - Revision B - September 2012) Adam Equipment Company 2012 1.0 CONTENTS 1.0 CONTENTS...1 2.0 INTRODUCTION...2 2.1 FEATURES...2 2.2 TECHNICAL SPECIFICATIONS...2
More informationMACHINE OPERATION. Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for use.
MACHINE OPERATION Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for use. Sort laundry according to care symbols Do not tumble
More informationM113S Users Manual. MERLIN STEALTH M113S Electric Fence Energizer GROUP OF COMPANIES. PDF created with pdffactory trial version
GROUP OF COMPANIES MERLIN STEALTH M113S Electric Fence Energizer M113S Users Manual Revision 1.0 Date: 29 January 2007 Table of Contents FOREWORD.... 3 GUARANTEE.... 4 INTRODUCTION.. 5 OPERATION WITHOUT
More informationOWNER S MANUAL. Evaporative Cooler. (English) (EXH, EZH) ILL239-D ILL1140-A FAN SPEED REMOTE CONTROL ECONOMY
OWNER S MANUAL Evaporative Cooler REMOTE CONTROL AUTO COOL FAN SPEED PM ECONOMY ILL239-D ILL1140-A (English) (EXH, EZH) Introduction...4 Remote Thermostat Control...5 Wall Mounted Thermostat Control...11
More informationFast Track Troubleshooting
Fast Track Troubleshooting Model: WF210ANW/XAA Please Note: There are Serial # changes on this model, verify you are ordering the correct parts for the Serial # you are servicing by reviewing Bulletins.
More information1 and 2 Fan Vision Series Portable Dryers
1 and 2 Fan Vision Series Portable Dryers Operator s Manual PNEG-1456 Date: 09-29-09 PNEG-1456 2 PNEG-1456 1 and 2 Fan Vision Series Portable Dryers Table of Contents Contents Chapter 1 Safety... 5 Safety
More informationOWNER S GUIDE HV300NZ
OWNER S GUIDE HV300NZ Thank you for purchasing the Shark Rocket Vacuum Cleaner. This Owner s Guide is designed to help you get a complete understanding of your new vacuum cleaner. Please read it carefully
More informationMODEL A5-2 SOLVENT & WATER RECOVERY SYSTEMS (EXPLOSION PROOF UNITS)
MODEL A5-2 SOLVENT & WATER RECOVERY SYSTEMS (EXPLOSION PROOF UNITS) FOR PROPER AND SAFE USE OF THIS CHEMCHAMP EQUIPMENT, PLEASE FOLLOW THIS DOCUMENT AND LOCAL AUTHORITY. KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
More information202 West 2 nd St Whirlpool Laundry Manual WASHER SAFETY. Your safety and the safety of others are very important.
WASHER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This
More informationBWD12.1 Fully integrated washer dryer
BWD12.1 Fully integrated washer dryer USER MANUAL FOR YOUR BAUMATIC BWD12.1 Fully integrated washer dryer You will be mine NOTE: This User Instruction Manual contains important information, including safety
More informationion Genesis Pump Controller
High Water Alarm Document No.: IONG_OM Page 1 of 7 Table of Contents Safety Precautions.......................... 1 General Overview.......................... 1 Installation.................................2
More informationREPAIR PART DIAGRAMS PRODUCT: WASHER MODEL: AW 120
REPAIR PART DIAGRAMS PRODUCT: WASHER MODE: AW 0 The information included in this Ariston Spare Parts ist may change without notice please see our web site www.usservicenet.com for updates, corrections
More informationInstruction Manual. Please read this manual and the Safety Instructions carefully before using your refrigerator.
Nexberg Pty Ltd T/a Evakool 16 Enterprise St CALOUNDRA QLD 4551 Tel : 07 5492 7777 Fax : 07 5492 7733 Please read this manual and the Safety Instructions carefully before using your refrigerator. 1. Safety
More information