First Use Safety Recommendation

Size: px

Start display at page:

Download "First Use Safety Recommendation"

Margery Charles
6 years ago
Views:

1 Centrifugal Juicer First Use Safety Recommendation Please read through this booklet for safe and efficient use of the appliance. We urge you to read the "Hint's" section and also follow all detailed instructions even if you are familiar with using this appliance. Keep this guide handy for future reference. English Page 02 Arabic Page 11 PRJE600

2 English IMPORTANT SAFEGUARDS While using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should be followed, including the following: Read all instructions carefully, even if you are familiar with the appliance. To protect against the risk of electric shock, DO NOT IMMERSE the appliance, cord set or plug in water or other liquids. To clean, wipe the exterior with a damp cloth. Close supervision is necessary when any appliance is used near children. Never leave an appliance unattended when in use. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Switch off and remove the plug from the power outlet when not in use before assembling or disassembling parts, cleaning or carrying out any maintenance of assembling or disassembling parts, cleaning out any maintenance of the appliance. Never pull the cord while unplugging out from power outlet. Do not operate any appliance with a damaged in any manner. Return the complete appliance to your nearest authorized service facility for examination, electrical repair, mechanical repair or adjustments to avoid any hazard. The use of attachments or accessories not recommended or sold by this appliance manufacturer may result in fire, electric shock or personal injury. Do not let the cord hang over the edge of a table, counter, or touch hot surfaces. Avoid touching hot surfaces, use handles and knobs. Do not operate or place any part of this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven). Do not abuse the cord. Never carry the appliance by the cord or yank it to disconnect it from the outlet; instead, grasp the plug and pull to disconnect. When using an extension cord with your appliance, make sure the extension cord is correctly wired, and rated for its use. This product is intended for household use only. Do not attempt to repair the appliance yourself; instead, take it to your Black & Decker-owned or Authorized Service Centre for repair. SAVE THESE INSTRUCTIONS -2-

3 English 11 Parts Identification 1 Motor housing 2 Latch left 3 Latch right 4 Sieve housing 5 Pulp container 6 Spout 7 Cover 8 Inlet chute 9 Pusher 10 Pusher (round) 11 Inlet chute adaptor 12 Sieve 13 Plug & cord set 14 Sieve adaptor 15 Switch Note: The Juicer will not operate unless all the parts (pulp container (5), sieve housing (12), latches (2,3) and cover (7)) are correctly fitted. Note: The sieve will continue to rotate after the appliance has been turned off. Note: Do not approach any parts that move in use. Allow the motor to come to a complete stop before removing any part of the appliance. FEATURES 600W 2 speed operation Removable pulp container Full apple inlet Stainless steel sieve -3-

4 English Fig A - Before first use: Before using your Juicer for the first time, make sure it is disconnected from the electrical supply, then remove all packaging from the sieve & pulp container. To remove the packaging, open the righthand latch (7), then the left-hand latch (8). Lift the cover (5) from the appliance. Remove the packing from the sieve (12) and the pusher from the pulp container (3). Pull the sieve housing & sieve from the Juicer. All parts must be cleaned as recommended in the section How to take care of your Juicer. The motor housing must only be cleaned with a damp cloth, and dried thoroughly before use. Inspect the sieve for signs of damage. Note: Do not use the appliance if the rotating sieve is damaged. Fig B - How to assemble your Centrifugal Juicer Place the sieve housing (13) on the motor housing (1), then place the sieve (12) into the sieve housing, pressing it onto the sieve adaptor (14). must then be gently pushed down and rotated in an anti-clockwise direction until it locks in place. A separate pusher (9) is provided for use with the adaptor. Warning: Never use the pusher (9) without the adaptor in place as damage may occur. To process round ingredients remove the adaptor by rotating it in a clock-wise direction then lift it from the inlet (8). The pusher is used by first aligning the groove with the rib in the inlet the pushing it down gently. How to use your Juicer This appliance is designed to extract juice from fruits & vegetables. Do not use this appliance for any other purpose. For indoor domestic use only. Prepare material to be processed by washing thoroughly and peeling as required. Remove all pips and large seeds. Large items may need to be cut into pieces to fit the inlet chute (8). Smaller items may be placed directly into the chute (8) and guided into the Juicer using the relevant pusher (9). Make sure the speed switch (2) is in the 0 (OFF) position, then plug the cord-set into a power outlet Note: Make sure that the voltage shown on Place the cover (5) on top of the seive the underside of the motor housing housing. Fit the hooks of the latches over the corresponds with the local supply voltage. recesses in the cover, then push the righthand latch (7) and the left-hand latch (8) required. Press the switch to select speed l or ll as down ensuring they lock in place. Press the switch to select speed l or ll as Fit the pulp container (5) onto the Juicer, required. Low speed should be used for soft making sure the rib on the container locates fruits and high speed for harder fruits. into the slot in the appliance. Check the pulp collector is in place, and Inlet Adaptor place a suitable container under the spout (6). The inlet can be adapted to suit various Place the ingredients into the inlet chute. The ingredients. Large round items such as pusher (11) can be used to gently guide the apples can be processed with no adaptor ingredients down the inlet chute. Do not however long ingredients such as carrots overload the machine. Too much pressure work better with the adaptor (11) in place. may cause material to jam the inlet chute. The adaptor (11) is fitted by first aligning the Note: Juice may continue to flow after the groove with the rib in the inlet. The adaptor appliance has been turned off. -4-

5 English This appliance should not be operated continuously for more than 1 minutes at a time. After 1 minutes use, the appliance should be allowed to cool at least 2 minute before using it again. If a blockage occurs, NEVER USE FINGERS OR ANY OBJECT OTHER THAN THE PUSHER TO CLEAR THE INLET CHUTE. If the food cannot be dislodged, turn the speed selector to the 0 position (OFF) and UNPLUG the POWER CORD FROM OUTLET. Remove the cover as described in Before first use and clear the blockage. Replace the cover, re-connect the Juicer to the electrical supply & resume juicing. When juicing is completed, the switch should be returned to the off (0) position, and allow the motor to come to a stop. The jug should be left in place until the juice stops flowing from the spout. UNPLUG POWER CORD FROM THE OUTLET, and disassemble the juice extractor. Empty the pulp from the collector and clean all parts as soon as possible after you have finished processing. Emptying the pulp container / strainer If the pulp container (3) becomes full before all of the ingredients are used, press the switch (15) to select the ''0'' (OFF) position and unplug the juicer. Take hold of the pulp container pull it away from the motor housing and discard the pulp. The pulp can be discarded and the strainer returned to its position in the motor housing. Reconnect the unit to the power supply & recommence juicing. How to take care of your Juicer The Juicer must be cleaned thoroughly after each use. Make sure the appliance is switched OFF and unplug the unit from the power supply before cleaning. NOTE: NEVER IMMERSE the motor housing (1) IN WATER OR ANY OTHER LIQUID. To clean motor housing, wipe clean with a damp cloth. Allow to dry thoroughly before re-using or storing. The removable parts of the juice extractor assembly should be washed promptly after each use with a mild detergent in warm water. These parts are not dishwasher safe and must be hand washed. Use a brush to scrub pulp residue from the cutting teeth and strainer holes of the sieve (12). After washing, rinse and allow all parts to dry thoroughly before re-assembly and storage. Never use a metal brush to clean the sieve. Take care when handling the sieve as the blades are sharp. Warning: Do not use the appliance if the rotating sieve is damaged. -5- Protecting the environment Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose it off with other household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again. Use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. A list of authorised Black & Decker repair agents and full details of our after-sales service and contact are available on the Internet at:

6 English BLACK & DECKER HOME APPLIANCE 2 YEAR WARRANTY Black & Decker provides a2yearwarranty for this product from the date of purchase against defects due to defective materials or workmanship. Motor/element burn-outs due to voltage fluctuations are not covered under warranty. If the product should become defective within the warranty period, Black & Decker will repair or (at Black & Decker's discretion) replace it free of charge. The warranty provisions do not cover failure due to accident, misuse, abuse, negligence or non observation of local regulations on the part of the user. Equally, the warranty provisions do not apply where the appliance has been serviced by a person not authorized by Black & Decker or serviced with non-approved parts and this has contributed to the fault of the product. Superseded models without a replacement equivalent will either be repaired or (at Black & Decker's discretion) replaced with another product of similar retail value. UPON PURCHASE Fill in the Warranty Registration Card with the original Authorized Dealer's stamp (indicating date of purchase) and attach your purchase receipt to it. Retain in case of claims in the future. MAKING A CLAIM Take your defective product together with the Warranty Registration Card & purchase receipt to your local service Centre. You can either do this in person or send it freight prepaid. If mailing or shipping your appliance, ensure that it is packed carefully in a sturdy carton with enough packing material to prevent damage. Include a note describing the problem to the service Centre and be sure to give your return address. DESIGNED FOR DOMESTIC PURPOSES ONLY. -6-

12 Afghanistan: Ishan National Co., Opp. Ministry of Justice, Kabul. Tel.: Algeria: SARL Outillage Corporation, 04 Route De Dely Brahim Cheraga, Alger. Tel.: /508, Fax: Bahrain: Fawaz Al Zayani, P.O.Box 26563, Adliya, Manama. Tel.: /712756, Fax: Bangladesh: Ultra Corporation, 8, Kushol Centre, Uttara, Dhaka Tel.: /9756 Ext.28, Fax: Egypt: Anasia Egypt for Trading S. A. E., P.O.Box 2443, 110 Mostafa Refaat Street, Sheraton Heliopolis 11361, Cairo. Tel.: , Fax: Ethiopia: Tewfik Sherif & Co. Ltd., P.O.Box 5583, Debre Zeit Road, Addis Ababa. Tel.: /601, Fax: India: Gryphon Impex Pvt. Ltd., D-6/4, Okhla Industrial Area, Phase-I, New Delhi Tel.: , Fax: Iran: Tehran - Service Centre of Iran, No 510, South Karger Ave, Below Pasteur Sq. Tehran. Tel.: /0656/ Kish Island: Cayhan Electric Co., No. 69, Paradise Shopping Centre, Kish Island. Tel.: Jordan: Bashiti Hardware, P.O.Box 1564, TLA Ali, Amman. Tel.: / , Fax: / Kenya: Zylog Enterprises, IPS Building, Kuanda Street, P.O.Box 40877, Nairobi. Tel.: /199, Fax: Kuwait: Al Omar Technical Co., P.O.Box 4062, Safat, Kuwait. Tel.: /0039, Fax: Lebanon: Est. F.A. Kettaneh SA, P.O.Box , Dora Highway, Kettaneh Building, Beirut. Tel.: /6, Fax: Libya: El Ghoul Brothers, P.O.Box 348, Islamic Call Bldg., Office , Benghazi. Tel.: /4183, Fax: Madagascar: Group Tana Confort S. A. R. L., B. P. 1770, Antananarivo. Tel.: , Fax: Malta: John G. Cassar Ltd., 36 Victory Str, Qormi QRM 06, Malta. Tel.: , Fax: Mauritius: Happy World Marketing Ltd., Block 2, Industrial Estate, Coromandel, P.O.Box 429, Port Louis. Tel.: , Fax: /7400. Nepal: Universal Trading Centre, P.O.Box 1947, Tripureswor, Kathmandu. Tel.: /260587/785, Fax: Nigeria: Amin Bros. Eng. Co. Ltd., 30A (Plot 1291), Akin Adesola Street, Victoria Island, Lagos. Tel.: , Fax: Oman: Oman Mktg. & Service Co., P.O.Box 2734, Ruwi, Muscat. Tel.: , Fax: Pakistan: Karachi - Ammar Service & Spares, 60, Bank Arcade, Serai Road, Karachi. Tel.: , Fax: /5243. Pakistan: Lahore - Electronics Inn, 212-G Raja Centre, Main Market, Gulberg, Lahore. Tel.: Philippines: Modern House International Enterprises, 213 Rizal Ave. Extension, between 2nd and 3rd Ave. Kalookan City. Tel.: , Fax: Qatar: Al Muftah Trading & Cont., P.O.Box 875, Doha. Tel.: / , Fax: Saudi Arabia: Dammam - Ebrahim Fawaz Al Zayani, P.O.Box 76026, Al Raka, Dammam. Tel.: , Fax: Jeddah: Anasia Trading Co. Ltd. Caravan Shopping Centre, Hail Street. P. O. Box 50959, Jeddah-21477, Tel / , Fax Madina: Garziz Trdg. for Bldg. Mat.&Decor., P.O.Box 3364, Madina. Tel.: / , Fax: Riyadh: Anasia Trading Co Ltd. New Akaria Building, 60th St., 3rd Floor, Building # 4, Office # 3402, Malaz. P. O. Box , Riyadh-11425, Tel.: , Fax: Yanbu: Bin Afif, P.O.Box 530 Yanbu, Al Bahr. Tel.: /8867, Fax: Sri Lanka: Delmege Gen. Equip. Pvt. Ltd., No. 428/1AT. B., Jaya Mawatha (Darley Road), Colombo-10. Tel.: , Fax: Sudan: United Distribution Company, P.O.Box 325, Sayed Abdul Rehman Street, Khartoum. Tel.: /777296, Fax: Tanzania: General Motors Investment, P. O Box 16541, 14 Vingunguti Nyerere Road, Dar Es Salaam. Tel.: /5022, Fax: /5412/3. Tunisia: STE Tunisienne De Quincaillerie Stq., Nvelle Z.I 2013, Ben Arous, Tunis, Tunisia, Tel: , Fax: UAE: Abu Dhabi - Light House Electric., P.O.Box 120, Abu Dhabi. Tel.: , Fax: Dubai - Black & Decker (O) A.G., P.O.Box 5420, Dubai. Tel.: /233, Fax: Ideal Mach. & Equipt. R. W/shop P.O.Box 37116, Al Quoz, Dubai. Tel.: , Fax: Sharjah - McCoy Middle East LLC, P.O.Box 20228, Sharjah. Tel.: , Fax: Uganda: The Building Centre, Kitgum House, 52 Station Road, P.O.Box 7436, Kampala. Tel.: , Fax: Yemen: Aden - Middle East Trad. Co. Ltd., Mulla Dakka, Aden. Tel.: , Fax: Sana'a: Middle East Trad. Co. Ltd., P.O.Box 12363, Hayel Street, Sana'a. Tel.: , Fax: Taiz: Middle East Trad. Co. Ltd., Campa area near Al-Kair mosque, Taiz. Tel.: /232033, Fax: Zimbabwe: J.D.Distributors, P.O.Box 226, 17 Bessemer Road, Graniteside, Harare. Tel.: , Fax: Cyprus: G. Kyprianou Trading Co Ltd., 51 Prodromou AVE. Strovolos, 1681, P.O. Box Nicosia Cyprus. Tel.: /1, Fax: , gktltd@spidernet.com.cy

Chopper (FX350) / Chopper Blender (FX350B) First Use Safety Recommendation

Chopper (FX350) / Chopper Blender (FX350B) (with FX350B) First Use Safety Recommendation Please read through this booklet for safe and efficient use of the appliance even if you are familiar with using