Environmental Product Declaration

Transcription

1 Based on ISO 0 Environmental Product Declaration Product Type of equipment / Product No. A6E A6E A6E A6E A6E PPA0-0 PPA05-0 PPA0-0 GPA0-0 GPA0-0 Product Type of equipment / Product No. Designation Aviation Smoke Detector : A6E , A6E , A6E , A6E and A6E PPA0-0, PPA05-0, PPA0-0, GPA0-0 and GPA0-0 Product line Obso_AMI Process control SIEMENS SAS 67 Rue Fourny 7850 Buc / France Management System since by ISO 900 (Quality) BVQI Environmentally compatible product design Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the product and process planning phases by complying with Siemens EP Standard No. (former SN 650) "Specifications on Environmentally Compatible Product and System Design". Product use Typical energy consumption Maintenance *) see below Maximum value in nominal mode Optical chamber contamination Risk of fire Fire protection according to Fire load ABD00 (Aeronautic) Packaging 0-PAP Corrugated fiber board Main Package 87g HDPE, Bentonite Desiccant Bag 6g -LDPE Plastic Bag + Document holder -PAP paper Labels g Page /5

2 Based on ISO 0 Notes on disposal recyclable Materials Plastics Total weight of device *) see below The total weight of a device may deviate from the total of the weights of all individual components due to rounding. PEI (Polyetherimide); halogen-free Cover ABS; halogen-free Labyrinth base g ABS; halogen-free Labyrinth g Silicone 50Z; halogen-free Machined box seal Elastomère B; halogen-free Machined box seal Metals Steel stainless Accessories Al alloy; Surtec 650 Machined base Steel stainless Filter AlCu; Surtec 650 Spacer Al alloy-silicone elastomere Connectors Copper alloy; Gold over nickel Contacts Al alloy; Surtec 650 Cover Al alloy; Surtec 650 Retaining flange Al alloy; Surtec 650 Support cell Aluminium; Surtec 650 Lower half shell Aluminium; Surtec 650 Upper half shell Al alloy; Surtec 650 Machined base Al alloy; Surtec 650 Housing cover Others Polyimide/PTFE Heater element PTFE-Cu Cable / Wire g Acétate d'ethyle BLOC LUBE RED g Diluant PU ISOX vernis incolore BT ISOX durcisseur NJ EX 890 PCBAs (Printed Circuit Board assembled) FR; solder SnAgCu PCBA CU60 FR; solder SnAgCu PCBA CP6 g FR; solder SnAgCu PCBA CA60 Page /5

3 Based on ISO 0 Special components (part of the assembled PCB) *Variant parts list Total weight of device Cover Labyrinth base Labyrinth Machined box seal Machined box seal [g] A6E A6E A6E A6E A6E Accessories Machined base Filter Spacer Connectors Contacts Cover Retaining flange Support cell Lower half shell Upper half shell Machined base Housing cover Page /5

4 Based on ISO 0 Heater element Cable / Wire BLOC LUBE RED Diluant PU ISOX vernis incolore BT ISOX durcisseur NJ EX PCBA CU60 PCBA CP6 PCBA CA Fire load [MJ] Typical energy consumption [kwh/a] Special components (part of the [pcs] Packaging Main Package [g] 87 Desiccant Bag 6 Plastic Bag + Document holder Labels Page /5

5 Based on ISO 0 Disposal The device is classified as waste electronic equipment in terms of the European Directive 0/9/EU (WEEE) and must not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws. Comments EU-directive 0/65/EU (RoHS) The device does not contain substances in concentrations and applications banned under the EU RoHS Directive. Regulation (EC) No. 907/006 (REACH) To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list according to Article 59 (, 0) of the regulation (EC) No. 907/006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0. % w/w. (Status according to the creation date of this document.) The device is halogen-free with exception of: PCB (TBBA); PVC cable; Heater element Environmental benefits Serves for the early detection of fires. Low energy consumption. Legal Disclaimer: This declaration is for information purpose only. This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period. SIEMENS SAS Please contact your local Siemens branch office to get further information on environmental aspects and disposal Page 5/5