Architectural. Specifications Guide

Transcription

1 /COM CompX Security Products Architectural Specifications Guide compx.com Section cabinet locks, door / drawer locks, file frame systems, gang locks, electronic access control locks BHMA Grade 1 BHMA Grade 2 StealthLock Wireless cabinet elock Cabinet elock C8109 RegulatoR with SlamCAM File Frame System Type 250

2 BHMA Grade 1 C8179, BHMA Grade 2 C8188 C8109 C8142 C8140 Pin Tumbler Door & Drawer Locks Deadbolt + Locks. For drawers, right hand and left hand doors. Surface mounted and requires 57/64" diameter hole for cylinder. Four or five pin tumbler available in 26D, 4, & 4G finish. Master keying by request. 1st & only BHMA certified dead bolt cabinet locks A Grade 1: BHMA designation. E07041 for drawer, E07121 for door. Made to order. Grade 2: BHMA designation. E07042 for drawer, E07122 for door. STOCK LOCKS product. CompX National Doors part numbers. C8173* material thickness to 7/8" C8174* material thickness to 1 1/8" C8175* material thickness to 1 3/8" CompX National Drawer part numbers. C8178* material thickness to 7/8" C8177* material thickness to 1 1/8" C8179* material thickness to 1 3/8" C8180* material thickness to 1 5/8" Cam + Locks. For drawer, right hand or left hand. Surface mounted and requires 57/64" diameter hole for cylinder. Cam style with 90 turn. Four or five pin available in 26D, 4, & 4G finish. Master keying available. CompX National part numbers. C8183 door, material thickness to 7/8" C8188 drawer, material thickness to 1 3/8" CCL R-1 keyways. CCL-R1 keyway pin tumbler door and drawer locks, dead bolt + type, available in cylinder lengths of: 7/8", 1 1/8", 1 3/8." Spacers are available for varying material thickness. Cam style locks also available in same lengths as CompX National pin tumbler door and drawer locks. Reference CompX National part numbers pin tumbler door and drawer locks. Note: All CompX National and CCL keyway pin tumbler locks are brass, not die-cast. * Certified Grade 2 locks also available for MRI applications non-ferrous or non-magnetic versions. Made to order. The Advantage Plus feature allows users to remove the cylinder while the lock remains in place. No mounting screws need to be removed. Simply use a 5/64" Allen wrench from the back to remove the lock cylinder for re-keying. All locks with this symbol feature the Advantage Plus system. Pin Tumbler Cylinder Cam Locks, Sliding Glass/Wood Door Locks For drawer, right hand and left hand doors. 90 cam turn, for overlay application, the combined thickness of front and frame cannot exceed the cylinder length. Four or five pin available in 26D, 4, & 4G finish. Master keying available. CompX National Drawer part numbers. For flush mount C8102 material thickness to 3/4" C8106 material thickness to 1 1/8" C8108 material thickness to 1 3/8" For lipped / overlay mount C8101 for material thickness to 5/8" C8103 for material thickness to 7/8" C8109 for material thickness to 1 1/2" Plunger style bolt action for sliding wood doors and requires 7/8" diameter mounting hole. Four or five pin available in 26D, 4 finish. Master keying available. CompX National part numbers. C8142 cylinder length 1 1/8" C8143 cylinder length 1 3/8" CompX National Part number. C8140, in 26D finish only ratchet type grips inner bypassing sliding glass door, lock case blocks outer door. Finish codes. 3 Bright brass 4 Satin brass 4G Antique brass 26D Dull chrome with American components

3 /COM ANSI/BIFMA standards CompX Timberline locks comply with ANSI/ BIFMA standards X storage units X vertical files X desk products X small / home office Lock features Seven finishes 5 disc tumbler lock core Removable lock core 500 key codes; all locks master keyed; numbered on lock face and keys Designed for ¾" thick material; most mount in 16.5mm diameter hole Deadbolt locks Available in horizontal and vertical mount versions Multiple cam setbacks for inset and overlay applications Double door Type 250, lock both doors without the use of a catch Cam locks Most mount in ¾" thick material Available in horizontal and vertical mount versions 90 and 180 rotation Multiple cam setbacks for inset and overlay applications Thick panel CB-170, adjustable from ¾" to 1-3/8" thick material Gang lock systems Lock multiple drawers with one lock in pedestals, desks and lateral files Available in front and side mount systems Central locking systems for desks and credenzas Mounts within ½" drawer suspension Anti-tip Meets ANSI/BIFMA standards for strength and durability Ensures that only one drawer will open at a time Mounts within ½" drawer suspension Wardrobe locks Vertical mount for wardrobe units Horizontal Mount for overhead storage units Two point locking, locks units up to 104" tall or wide Glass door locks Available for single / double swinging doors and sliding bypass glass doors Horizontal and vertical mount Compression mount and bore through styles File Frame Engineered metal filing system in attractive black or white finish Durable design handles heavy loads Interlocking components allow for easy installation and adjustability Double Door Latch. Eliminate the elbow catch. Types 250, 281 Types 170, 184 System 100 Glass Door Lock NEW! Double Door Latch Watch the video compx.com/ddl Eliminates the need for an elbow catch, or other devices, and allows hardware to be installed out of the way. No need to reach inside cabinet to release elbow catch Doors can be closed in any order Low profile Latch mechanism reduces product footprint inside cabinet Requires use of a single lock (sold separately) Allows two or three point locking for standard or wardrobe style double door cabinets when used with a lock Easy to install and use Exceeds pull force above 150lbs Kits contain one each: latch, activator and catch CATCH ON THE NON- LOCKING DOOR ACTS AS A SLAM LATCH AND DOES NOT REQUIRE REACHING INTO THE CABINET CATCH LATCH SIGNIFICANT ENGAGEMENT BETWEEN THE CATCH AND LATCH INCREASES SECURITY ACTIVATOR

4 StealthLock Keyless, Invisible Cabinet Locking System Applications Healthcare cabinetry Lockers Office, reception and conference furniture Audio visual cabinets Retail/Display cabinets Residential closet, liquor and kitchen cabinetry Keyless, Invisible Cabinet Locking System StealthLock works via radio frequency which allows wireless locking of multiple cabinet openings. Can be used with wood, phenolic resin and glass materials. Features and Functions Transmitter Pad can activate multiple Receiver Latches Transmitter Pad operates within a 15 ft range, no wiring required Programmable user and supervisor codes Receiver Latch fits within ½" drawer suspension clearance Uses 4 AAA batteries for the Receiver Latch and CR2032 coin battery for the Transmitter Pad Low battery indicator Modes of Operation Passage User must manually lock Self-Lock Receiver Latch automatically relocks Single / Shared Use Allows user to choose their code at time of operation Visit stealthlock.com to watch videos and for more infornation

5 REGULATOR WITH MANUAL LOCKING* REGULATOR WITH SELF-LOCKING SLAMCAM* SLAMCAM Keyless locking made easy! Electronic push button cabinet locks can be installed easily on new or retrofit applications. * Self-locking and manual locking are available on both vertical and horizontal versions of RegulatoR. The RegulatoR is available in two versions: self-locking and manual locking. Self-locking features SlamCAM, a spring loaded latch, which allows the user simply to close the cabinet door or drawer no need to return the knob to the locked position. Manual locking Manual locking version requires users to rotate the knob into the unlocked and locked positions. Daily / Shared Use Mode allows for revolving user code; multiple users may use the RegulatoR without having to re-program the RegulatoR each time. Applications: cabinet doors or drawers lockers storage enclosures file cabinets computer server racks Markets: healthcare schools/ universities health clubs laboratory office furniture retail display RegulatoR is easy to use 20 codes per lock: 19 user codes and one supervisor code; code length is 4-8 digits Available in two versions selflocking featuring SlamCAM and manual locking Selflocking RegulatoR is easy to maintain Low battery indicator 75,000 cycles; extended battery life reduces replacement and labor/ maintenance costs Battery compartment is easily accessible from the outside of the cabinet Note: location of door hinges determines hand of door when facing door, i.e. if hinges are on the right, order right hand mount. Features Self-locking, featuring SlamCAM RegulatoR is easy to install Four different keypad configurations: left and right hand, vertical and top vertical (available in both self-locking and manual locking) Install on new or retrofit applications Uses ¾" mounting hole Manual locking 75,000 cycles 2 AAA batteries included Convenient external battery installation/removal Low battery indicator 19 user codes and 1 supervisor code ADA compliant Satin chrome or matte black finish Three cylinder lengths 7/16", 1-3/16", 1-3/4" Shared/daily use mode Technician code Easy to clean membrane keypad Installs on wood or metal cabinet doors and drawers Spacers provide additional latching dimensions

6 WS-PRKP-TEMP-V (200/300 SERIES) WS-PRKP-CAB (200/300 SERIES) 150-PRKP-FRG-V (150 SERIES) 150-ICKP-CAB (150 SERIES) See compxelock.com for more information Features 150 Series 200 Series 300 Series 250 user capability 1500 event audit trail (software required) LockView 5 software (optional) Stand alone; not network capable Three modes of access: keypad, HID Prox and HID iclass Battery operated Cabinet application Surface mount for refrigerator/freezer application Access control Motor-driven latching mechanism provides the convenience of automatic relocking Door security switch; notifies if door is ajar or for unauthorized entry (option) 3000 user capability 15,000 access event audit trail (software required) 500,000 temperature data points (software required) Monitors internal temperature 100 C to -100 C Temperature monitoring LockView 5Pro software (required for 300 Series networking features) Wi-Fi (802.11g) capable Ethernet capable Escalating notification system sends temperature out of range alerts via , text message, voice call, or fax Custom elock OEM applications available. For more information about OEM options, call or visit compx.com Registered to: ISO 9001:2000 Certificate: A2695, A10010 Reorder #: F CompX National PO Box 200 Mauldin, SC phone CompX Timberline 715 Center Street Grayslake, IL phone Copyright 2017 CompX Security Products CompX elock and Lockview are Registered Trademarks of CompX International