Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK UK Test Laboratory School Street Willenhall WV13 3PW Contact: Mr I Bridge Tel: +44 (0) Fax: +44 (0) ian.bridge@assaabloy.com Website: Testing performed at the above address only DETAIL OF ACCREDITATION - cylinders for locks Key strength BS EN 1303:2015 Durability tests - standard test cycles BS EN 1303:2015 Corrosion resistance BS EN 1303:2015 Operation at extreme temperatures BS EN 1303:2015 Operation of the security mechanism Torque resistance of plug and/or cylinder BS EN 1303:2015 BS EN 1303:2015 Resistance to drilling BS EN 1303:2015 Resistance to attack by chisel BS EN 1303:2015 Resistance to attack by twisting BS EN 1303:2015 LOCKS and LATCHES for doors in buildings Resistance to attack by plug/cylinder extraction Torque resistance of plug/cylinder relevant to attack resistance Freedom of operation of follower and spring bolt action in rim and mortice locks and latches Freedom of operation of cap follower and spring bolt action in cylinder rim night latches BS EN 1303:2015 BS EN 1303:2015 Assessment Manager: PC2 Page 1 of 10

2 LOCKS and LATCHES (cont d) for doors in buildings - locks and latches - mechanically operated locks, latches and locking plates Freedom of operation of knob or handle and spring bolt action in cylinder rim night latches Strength of bolt spring Strength of follower, spring bolt and stopping medium in rim and mortice locks and latches Strength of knob, cams, spring bolt and stopping medium in rim night latches Strength of connecting bar in rim cylinders Dead bolt against end pressure Operation of security mechanism Strength of keys Spring bolt through follower Spring bolt through striking plate or staple Locking snib action on cylinder rim night latches Strength of lock or latch case, forend and bolt Strength of staple Strength of striking plate Return force of latch bolt Resistance to side load on latch bolt Torque to operate deadbolt Strength of normal latch action and stops Assessment Manager: PC2 Page 2 of 10

3 (cont d) - locks and latches - mechanically operated locks, latches and locking plates Torque resistance of rim lock with lockable handle/knob Durability of latch action without force applied Durability of latch action with force applied Durability of deadbolt mechanism Durability of locking snib mechanism Closing force Corrosion resistance Operation at extremes of temperature Torque resistance of knob or lever handle on bored lock and latch sets Torque resistance of knob or lever handle on rim night latch Resistance to side load on deadbolt Resistance to drilling and side load on deadbolt Deadbolt projection Resistance to end load Resistance to end load with drilling Resistance to pulling of hook/claw bolt Resistance to disengaging of hook/claw bolt Resistance to forcing of locating device in sliding door locks Assessment Manager: PC2 Page 3 of 10

4 (cont d) - locks and latches - mechanically operated locks, latches and locking plates Resistance to pulling off of knob on bored lock and latch set Resistance to end load on box protected locking plate Resistance to side load on locking plate Resistance to pulling on locking plate Resistance to lifting force on locking plate Protection against removal from door Strength of key Manual locking Manual locking with intermediate locking positions Automatically locking deadbolt Automatically locking latch bolt Torque to withdraw the latch bolt with key Torque to withdraw latch bolt with handle Strength of bolt actions Minimum follower restoring torque Non-interpassing of keys with just one interval differ THIEF RESISTANT LOCK ASSEMBLIES - key egress - keyless egress Durability of deadbolt mechanism Assessment Manager: PC2 Page 4 of 10

5 THIEF RESISTANT LOCK ASSEMBLIES (cont d) - key egress - keyless egress Durability of latch action with force applied Resistance to end load Resistance to end load with drilling Strength of key Manual locking Manual locking with intermediate locking positions Automatically locking deadbolt Automatically locking latch bolt Torque to withdraw the latch bolt with key Torque to withdraw latch bolt with handle Strength of bolt actions Minimum follower restoring torque Assessment Manager: PC2 Page 5 of 10

6 THIEF RESISTANT LOCK ASSEMBLIES (cont d) - key egress - keyless egress Key strength Durability tests Corrosion resistance and temperature Corrosion resistance (Test of operation at extremes of temperatures) Operation of the security mechanism Torque resistance of plug and/or cylinder Resistance to drilling Resistance to attack by chisel Resistance to attack by twisting Resistance to attack by plug/cylinder extraction Security hardware and cylinder test - Part 1 - Part 2 PAS 24:2007 (withdrawn) Assessment Manager: PC2 Page 6 of 10

7 - padlocks and padlock fittings Operational unlocking BS EN 12320:2012 Key strength BS EN 12320:2012 Durability BS EN 12320:2012 Corrosion resistance BS EN 12320:2012 Non-interpassing of keys BS EN 12320:2012 Resistance to attack by plug / cylinder extraction BS EN 12320:2012 Torque resistance of cylinder plug BS EN 12320:2012 Resistance to pulling of shackle and staple Resistance to twisting of shackle and staple Resistance to cutting of shackle and staple BS EN 12320:2012 BS EN 12320:2012 BS EN 12320:2012 Shackle accessibility check BS EN 12320:2012 Staple accessibility check BS EN 12320:2012 Resistance to impact at low temperature BS EN 12320:2012 Drill resistance BS EN 12320:2012 Sawing resistance BS EN 12320:2012 Manual attack BS EN 12320:2012 Tensile test for padlocks Documented In-House Method No LTM single-axis hinges Measurements BS EN 1935:2002 Load-deformation BS EN 1935:2002 Overload BS EN 1935:2002 Shear strength BS EN 1935:2002 Assessment Manager: PC2 Page 7 of 10

8 (cont d) - single-axis hinges Endurance BS EN 1935:2002 Corrosion resistance BS EN 1935: lever handles and knob furniture Shear strength with hinge pin removed Check of spindle and fastening elements BS EN 1935:2002 Annex C.4 BS EN 1906:2012 Rotational torque strength BS EN 1906:2012 Axial strength of lock furniture or latch furniture and fixing BS EN 1906:2012 Free play and safety BS EN 1906:2012 Free angular movement or misalignment BS EN 1906:2012 Torque of return mechanism BS EN 1906:2012 Durability of mechanism BS EN 1906:2012 Corrosion resistance BS EN 1906: emergency exit devices operated by a push pad Temperature test Corrosion test BS EN 179:2008 BS EN 179:2008 Release BS EN 179:2008 Re-engaging BS EN 179:2008 Durability (excluding devices with additional deadbolt) Abuse resistance - operating element Abuse resistance - vertical rods BS EN 179:2008 BS EN 179:2008 BS EN 179:2008 Security BS EN 179: panic exit devices operated by a horizontal bar Temperature test Corrosion test Assessment Manager: PC2 Page 8 of 10

9 (cont d) - panic exit devices operated by a horizontal bar Release Re-engaging Durability (excluding devices with additional deadbolt) Abuse resistance - bar Abuse resistance - vertical rods Security EXTERNAL DOORSETS - single and double leaf - single swing - hinged - inward and outward opening - with or without integral side panels and fanlights PRIVATE LETTER BOXES and LETTER PLATES DOORSETS - single and double leaf - single and double swing - hinged - pivot - stable - with or without integral side panels and fanlights Manipulation test - manual test - mechanical test Manual cutting test Mechanical loading test Manual check test Soft body impact test Hard body impact test Security hardware and cylinder test - Part 1 - Part 2 Letter plate fixings Letter plate flap Manipulation test - manual test - mechanical test Manual cutting test Mechanical loading test Manual check test Soft body impact test Hard body impact test Security hardware and cylinder test - Part 1 - Part 2 PAS 24:2012 BS EN 13724:2002 (withdrawn) Clause PAS 24:2012 BS EN 13724:2002 (withdrawn) Clause PAS 24:2016 Assessment Manager: PC2 Page 9 of 10

10 WINDOWS and DOORS Weathertightness BS : A1:2016 Air permeability BS : A1:2016 BS EN 1026:2000 Watertightness BS : A1:2016 BS EN 1027:2000 Resistance to wind load BS : A1:2016 BS EN 12211:2000 WINDOWS: SINGULAR and MULTILIGHT - top hung (open out), - side hung (open in and open out), - bottom hung (open in), butt hinged - top and side hung (open out), projected - top hung fully reversible - tilt and turn and turn and tilt - vertical sliding - fixed and dummy vents - double opening (French windows) WINDOWS: SINGULAR and MULTILIGHT - top hung, side hung, bottom hung, butt hinged - top and side hung projected - top hung and side hung fully reversible - tilt and turn and turn and tilt - vertical and horizontal sliding - fixed and fixed casements (dummy vents) - parallel opening - double opening (French windows) - vertical and horizontal pivot Manipulation test - manual test - mechanical test Mechanical loading test Manual check test Manipulation test - manual test - mechanical test Mechanical loading test Manual check test PAS 24:2012 PAS 24:2016 END Assessment Manager: PC2 Page 10 of 10