SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie

Transcription

1 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation Head Office Poppenbouwing NZ Geldermalsen The Netherlands Location Abbreviation/ location code Head Location Poppenbouwing NZ Geldermalsen The Netherlands Mobile lab Address n/a On customer s location Address n/a 3 4 Type activity Internal reference number Location Ro or façade elements with doors, windows, hatches and solid fillings. Curtain walls & grilles. Determination burglar resistance façade elements. Static, dynamic and manual attack tests WI D3-H In accordance with NEN 5096 EN , 4 2 This annex has been approved by the Board the Dutch Accreditation Council, on its behalf, J.A.W.M. de Haas Director Operations If there is a referral to a code starting with NAW, NAP, EA IAF, this constitutes a scheme for which RvA-BR00 applies. The accepted version is mentioned on the list schemes for which accreditation can be granted by the RvA. Dutch Accreditation Council RvA Page 2

2 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location European Construction Products Regulation 305/20, System 3 Verification Constancy Performance Product area 2 Decree: 99/93/EC DOORS, WINDOWS, SHUTTERS, BLINDS, GATES AND CORRESPONDING HARDWARE (/) Industrial and commercial garage doors and gates Product standard - Part Products without fire or smoke resistance properties Windows and doors Product standard, performance requirements - Part : Windows and doors without fire or smoke resistance properties Automatically operating doors for pedestrians Product standard, performance requirements Outside doors other than revolving doors, initially designed for electric doors without fire or smoke resistance properties Window and door hardware Locks for emergency exits with a door handle or a push panel, for use in escape routes Requirements and test EN 324- EN 435- EN 636 EN 79 Dutch Accreditation Council RvA Page 2 2

3 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Window and door hardware Panic locks for emergency doors with a horizontal operating bar for use in escape routes Requirements and test EN 25 Window and door hardware single-axis hinges Requirements and test EN 935 Window and door hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test EN 2209 Window and door hardware Locks and latches - Electromechanically operated locks and striking plates - Requirements and test EN Door and window hardware Determination the corrosion resistance; salt spray test WI D3-H In accordance with EN 670 ISO 9227, Determination the mechanical characteristics, durability, corrosion resistance hinges 4 Determination the dimensions, mechanical characteristics, durability and corrosion resistance panic exit devices 5 Determination the dimensions, mechanical characteristics, durability and corrosion resistance emergency exit devices WI D3-H5-8-29/30/3 In accordance with EN 935 WI D3-H5-8-29/30/36 In accordance with EN 25 WI D3-H5-8-29/30/35 In accordance with EN 79, 4 2, 4 2, 4 2 Dutch Accreditation Council RvA Page 3 2

4 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location 6 Door and window hardware Determination the mechanical characteristics, durability and corrosion resistance locks WI D3-H5-8-29/30/32 In accordance with EN 2209, Industrial and commercial garage doors and gates Determination air permeability. 8 Determination watertightness. 9 Determination resistance to wind load. 0 Safe opening, determination safety risks. Visual inspection and functional tests Determination dynamic forces powered doors 2 Service life watertightness, thermal resistance and airtightness. Cyclic durability test, functional test and visual inspection WI D3-H In accordance with EN 2427 WI D3-H In accordance with EN 2489 WI D3-H In accordance with EN 2444 WI D3-H In accordance with EN 324- sec , EN 2605 sec 5..2, sec 5.3.2, sec and sec WI D3-H In accordance with EN 324- sec 4.3.3, EN 2445:2000 sec 4...4, sec 5, sec 7.3 WI D3-H In accordance with EN 2605:2000, sec 5.2., 4, 4 3 Windows and doors Determination air permeability. WI D3-H In accordance with EN 026, Annex I EN EN Determination watertightness.. 5 Determination resistance to wind load. WI D3-H In accordance with EN 027 EN 2208 WI D3-H In accordance with EN 22 EN 220 Dutch Accreditation Council RvA Page 4 2

5 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location 6 Windows and doors Determination Load-bearing capacity safety devices. Mechanical test WI D3-H In accordance with EN 435- sec 4.8, EN Determination resistance to impact load. Pendulum test WI D3-H In accordance with EN Automatically operating doors for pedestrians Determination air permeability. WI D3-H In accordance with EN 636 sec 4.0, EN Determination watertightness. 20 Determination resistance to wind load. 2 Determination resistance to impact load. Pendulum test WI D3-H In accordance with EN 636 sec 4.7, EN 027 WI D3-H In accordance with EN 636 sec 4.8, EN 22 WI D3-H In accordance with EN Determination height In accordance with EN 636 sec 4.4, 4 Product area 4 Decree: 99/9/EC EN 363; EN 435-; EN 438- HEAT INSULATION PRODUCTS (/2) (s manufactured in the factory and s that are intended for formation on location) All intended uses Dutch Accreditation Council RvA Page 5 2

6 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Products for thermal insulation buildings Factory-produced s expanded polystyrene (EPS) - Specification Determination thermal resistance Determination compression strength, tensile strength and bending strength 25 Determination service life compression strength 26 Determination water absorption on immersion MV09.0 In accordance with EN 2667 or EN 2939 EN 363 annex A, EN 823 MV09.03 In accordance with EN 826, EN 605, EN 2089, EN607 MV09.03 In accordance with EN 606, EN 209, EN 826, sec EN363 MV03.0 In accordance with EN 2087 method 2A 27 Materials for the thermal insulation buildings Products formed Determination thermal resistance 28 in-situ from sprayed hard polyurethane (PUR) and Determination compression strength MV09.03 In accordance with EN 435- sec 4.3.4, EN polyisocyanurate (PIR) foam - Part : Specification for the sprayed hard Determination water absorption on immersion 30 foam system Determination water vapour before installation transmission properties MV09.0 In accordance with EN 435- sec 4.2.2, 5.3.2, annex A & EN 2667, EN 2939C MV03.0 In accordance with EN 435- sec EN 609 method B MV03.05 In accordance with EN 435- sec 4.3.2, EN 2086 method A 3 Determination thermal resistance MV09.0 In accordance with EN 438- sec 4.2.2, EN 438- annex A & C, EN 2667, EN Determination water vapour transmission properties 33 Determination water absorption on immersion MV03.05 In accordance with EN 438- sec EN 2086, method A MV03.0 In accordance with EN 438- sec EN 609, method B Dutch Accreditation Council RvA Page 6 2

7 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Decree: 99/9/EC EN HEAT INSULATION PRODUCTS (2/2) 34 Determination water absorption on immersion MV03.0 In accordance with EN sec EN 609:996 method A Product area 9 Decree: 96/580/EC EN 3830 CURTAIN WALLS (/) 35 Curtain walls Determination resistance to impact load. Pendulum test 36 Determination air permeability. 37 Determination watertightness. 38 Determination resistance to wind load. WI D3-H In accordance with EN 2600, (pr)en 409 WI D3-H In accordance with EN 253 EN 252 WI D3-H In accordance with EN 255 EN 254 WI D3-H In accordance with EN 279 EN 36 Product area 7 Decree: 97/740/EC EN 845-; EN MASONRY AND RELATED PRODUCTS (2/3) in walls and partitions Dutch Accreditation Council RvA Page 7 2

8 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Anchors, tension rods, climbing irons, brackets, corner anchors, horizontal joint reinforcement Determination compression strength Determination tensile strength MV Determination buckling or bending strength MV2.02 In accordance with EN 846-5, EN In accordance with EN 846-5, EN MV2.02 In accordance with EN 846-5, EN 846-6, 4 2, 4 2, Determination displacement under load MV2.03 In accordance with EN 846-0, Determination load bearing capacity MV2.03 In accordance with EN Lintels Determination load bearing capacity MV2.0 In accordance with EN Determination bending strength MV2.0 In accordance with EN 846-9, 4 2, 4 2, 4 2 Product area 22 Decree: 98/436/EC ROOF COVERINGS, SKYLIGHTS, ROOF WINDOWS AND ACCESSORIES (5/6) Uses that are subject to the regulations for hazardous s Windows and doors Product standard, performance requirements - Part : Windows and doors without fire or smoke resistance properties EN 435- Dutch Accreditation Council RvA Page 8 2

9 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Ro coverings Continuous ro lights plastics with or without upstands - Classification, requirements and test Accessories for ros Plastic ro dome lights with upstands Product specification and test EN 4963 EN Ro windows Determination watertightness. 47 Ro dome lights Determination watertightness. WI-D3-H In accordance with EN 027 EN 2208 WI-D3-H In accordance with EN Continuous ro lights Determination watertightness. WI-D3-H In accordance with EN 873, EN 4963 sec 5.3 en 6.3 Decree: 98/436/EC ROOF COVERINGS, SKYLIGHTS, ROOF WINDOWS AND ACCESSORIES (6/6) For other uses than specified for the families /6, 2/6, 3/6, 4/6 and 5/6 Windows and doors Product standard, performance requirements - Part : Windows and doors without fire or smoke resistance properties EN 435- Dutch Accreditation Council RvA Page 9 2

10 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Ro coverings Continuous ro lights plastics with or without upstands - Classification, requirements and test Accessories for ros Plastic ro dome lights with upstands Product specification and test EN 4963 EN Ro windows Determination air permeability. 50 Determination resistance to wind load. 5 Determination Load-bearing capacity safety devices. Mechanical test 52 Determination resistance to impact load. Pendulum test 53 Ro dome lights Mechanical resistance: determination change under load.. Visual assessment. 54 Determination resistance to impact load 55 Determination air permeability. WI-D3-H In accordance with EN 026, Annex I EN 435- EN 2207 WI-D3-H In accordance with EN 22 EN 220 WI D3-H In accordance with EN 435- sec 4.8, EN 4609 WI D3-H In accordance with EN 3049 WI-D3-H In accordance with EN 873 sec 5.4 and 6.4 WI D3-H In accordance with EN 873 WI-D3-H In accordance with EN 253 EN 252 Dutch Accreditation Council RvA Page 0 2

11 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location 56 Continuous ro lights Mechanical resistance: determination change under load.. Visual assessment. WI-D3-H In accordance with EN 4963 sec 5.4 and 6.4 EN EN 873 sec 5.4 and 6.4 * 57 Determination resistance to impact load 58 Determination air permeability. WI D3-H In accordance with EN 4963 sec 5.4 and 6.4, EN 873 WI-D3-H In accordance with EN 026, EN 253 Product area 25 Decree: 99/470/EC EN 2004 BUILDING ADHESIVES (/2) Adhesives for tiles Internal and external use in buildings and other civil engineering works 59 Cementitious adhesives Determination (service life ) adhesion strength (under influence aging by water/moisture; climate/heat; freeze/thaw cycle) MV7.04 In accordance with EN Dispersion adhesives Determination (service life ) shear adhesion strength (under influence aging by climate/heat; water/moisture) MV7.02 In accordance with EN 324 Dutch Accreditation Council RvA Page 2

12 Normative document: EN ISO/IEC 7025:2005 This annex is valid from: to Replaces annex dated: Type activity Internal reference number Location Product area 30 Decree: 2000/245/EC FLAT GLASS, PROFILED GLASS AND GLASS BLOCKS (4/6) For other uses that may involve safety in use risks and may be subject to relevant regulations Glass for buildings Thermally toughened alkaline earth silicate safety glass - Part 2: Conformity evaluation/product standard EN EN EN EN EN EN EN EN EN EN EN EN EN 4449 EN Flat and priled glass Hard body drop test 2 Use facilities outside the test laboratory the accredited organisation WI-D3-H In accordance with EN 356, 4 2 Dutch Accreditation Council RvA Page 2 2