Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC17065:2012 to provide product conformity certification Bucknalls Lane Garston Watford Hertfordshire WD25 9XX Contact: Mr M Pratt Tel: +44 (0) Fax: +44 (0) prattm@bre.co.uk Website: Locations where certification activities covered by the above Accreditation are undertaken Garston Watford Hertfordshire WD25 9XX United Kingdom Assessment Manager: TB Page 1 of 34

2 CONSTRUCTION PRODUCTS DETAIL OF ACCREDITATION Building hardware BS EN 179:1998 BS EN 1125:1997 Fire doors, lift landing doors and shutters LPS 1056 Trussed rafters BS 5268:Part 3:2006 Enhanced security performance requirements for windows and doorsets SD204 Scheme LPCB Approval of Window and Doorsets and PAS 24 Performance of windows and doors. Classification for weathertightness and guidance on selection and specification BS :2009 Performance of windows and doorsclassification for operation and strength characteristics and guidance on selection and specification BS :2009 Performance of windows and doorsclassification for additional performance characteristics and guidance on selection and specification BS :2008 Timber windows and doorsets. Fully finished factoryassembled windows and doorsets of various types. Specification BS 644:2012 Pedestrian doorsets and door frames made from steel sheet. Specification BS 1245:2012 Aluminium alloy windows and doorsets. Specification BS 4873:2016 Steel-framed windows and glazed doors. Specification BS 6510:2010 Assessment Manager: TB Page 2 of 34

3 CONSTRUCTION PRODUCTS Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles BS7412:2007 Composite doorsets. Domestic external doorsets. Specification BS 8529:2010 Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification EN 1627:2011 Windows and doors. standard, performance characteristicswindows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics EN :2006 Pre-fabricated building system WIMLAS Technical Specification 001 Flooring system WIMLAS Technical Specification 002 Walling, roofing and partition systems WIMLAS Technical Specification 003 Doors and windows WIMLAS Technical Specification 004 Thermal insulation systems WIMLAS Technical Specification 005 Wall and roof cladding systems WIMLAS Technical Specification 006 Membranes WIMLAS Technical Specification 007 Drainage and plumbing systems WIMLAS Technical Specification 008 Groundwork and foundation systems WIMLAS Technical Specification 009 Assessment Manager: TB Page 3 of 34

4 CONSTRUCTION PRODUCTS Anchors, connectors, fasteners and fixings WIMLAS Technical Specification 010 Ventilation systems WIMLAS Technical Specification 011 Highways and bridgework systems: reinforced soil systems and reinforcing elements and facing units for reinforced soil WIMLAS Technical Specification 012 (which includes EN 13251) s for innovative systems, elements and components for residential buildings BPS 2020 Under lays for use in roof construction BPS 7005 Thermal insulation blanket products in walls and ceilings BPS 7006 Where appropriate the above includes: Metal Anchors for use in Concrete Part 1: Anchors in General ETAG 001 Metal Anchors for use in Concrete Part 2: Torque-Controlled Expansion Anchors ETAG 001 Metal Anchors for use in Concrete Part 3: Undercut Anchors ETAG 001 Metal Anchors for use in Concrete Part 4: Deformation-Controlled Expansion Anchors ETAG 001 Metal Anchors for use in Concrete Part 5: Bonded Anchors ETAG 001 Assessment Manager: TB Page 4 of 34

5 CONSTRUCTION PRODUCTS Metal Anchors for use in Concrete Part 6: Anchors for multiple use for Non-Structural Applications ETAG 001 Structural Sealant Glazing Systems (SSGS) Part 1: Supported and Unsupported Systems ETAG 002 Structural Sealant Glazing Systems (SSGS) Part 2: Coated Aluminium Systems ETAG 002 Structural Sealant Glazing Systems (SSGS) Part 3: Systems incorporating Profiles with Thermal Barrier ETAG 002 Internal Partition Kits for use as Non Load-Bearing Walls ETAG 003 External Thermal Insulation Composite Systems with Rendering ETAG 004 Liquid Applied Roof Waterproofing Kits Part 1: General ETAG 005 Liquid Applied Roof Waterproofing Kits Part 2: Specific stipulations for Kits based on Polymer Modified Bitumen Emulsions and Solutions ETAG 005 Liquid Applied Roof Waterproofing Kits Part 4: Specific stipulations for Kits based on Flexible Unsaturated Polyester ETAG 005 Liquid Applied Roof Waterproofing Kits Part 5: Specific stipulations for Kits based on Hot Applied Polymer Modified Bitumen ETAG 005 Assessment Manager: TB Page 5 of 34

6 CONSTRUCTION PRODUCTS Liquid Applied Roof Waterproofing Kits Part 6: Specific stipulations for Kits based on Polyurethane ETAG 005 Liquid Applied Roof Waterproofing Kits Part 7: Specific stipulations for Kits based on Bitumen Emulsions and Solutions ETAG 005 Liquid Applied Roof Waterproofing Kits Part 8: Specific stipulations for Kits based on Water Dispersible Polymers ETAG 005 Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes ETAG 006 Timber Frame Building Kits ETAG 007 Prefabricated Stair Kits in General (Excluding severe climatic conditions) ETAG 008 Non Load-Bearing Permanent Shuttering Kits/Systems based on Hollow Blocks or Panels of Insulating Materials and sometimes Concrete ETAG 009 Self Supporting Translucent Roof Kits ETAG 010 Light Composite Wood-Based Beams and Columns ETAG 011 Log Building Kits ETAG 012 Post-Tensioning Kits for Pre-stressing of Structures ETAG 013 Plastic Anchors for fixing of External Thermal Insulation Composite Systems with Rendering ETAG 014 Assessment Manager: TB Page 6 of 34

7 CONSTRUCTION PRODUCTS Plastic Anchors for fixing of External Thermal Insulation Composite Systems with Rendering ETAG 014 Three-Dimensional Nailing Plates ETAG 015 Self-Supporting Composite Lightweight Panels Part 1: General ETAG 016 Self-Supporting Composite Lightweight Panels Part 2: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Roofs ETAG 016 Self-Supporting Composite Lightweight Panels Part 3: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in External Walls and Claddings ETAG 016 Self-Supporting Composite Lightweight Panels Part 4: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Internal Walls and Ceilings ETAG 016 Fire protective products Part 1: General ETAG 018 Fire Protective s Part 2: Reactive Coatings for Fire Protection of Steel Elements ETAG 018 Fire protective products Part 3: Renderings, rendering kits intended for fire resisting applications ETAG 018 Fire Protective s Part 4: Fire Protective Board, Slab and Mat s and Kits ETAG 018 Assessment Manager: TB Page 7 of 34

8 CONSTRUCTION PRODUCTS Plastic Anchors for multiple use in Concrete and Masonry for Non-Structural Applications Part 2: For use in normal weight Concrete ETAG 020 Plastic Anchors for multiple use in Concrete and Masonry for Non-Structural Applications Part 3: For use in Solid Masonry Materials ETAG 020 Plastic Anchors for multiple use in Concrete and Masonry for Non-Structural Applications Part 4: For use in Hollow or Perforated Masonry ETAG 020 Plastic Anchors for multiple use in Concrete and Masonry for Non-Structural Applications Part 5: For use in Autoclaved Aerated Concrete ETAG 020 Plastic Anchors for Fixing of External Thermal Insulation Composite Systems with Rendering ISO Cold Storage Premises Kits Part 1: Cold Storage Room Kits ETAG 021 Cold Storage Premises Kits Part 2: Cold Storage Building Envelope and Building Kits ETAG 021 Prefabricated Building Units ETAG 023 Concrete Frame Building Kits ETAG 024 Metal Frame Building Kits ETAG 025 Fire stopping and fire sealing products Part 2: Penetration seals ETAG 026 Assessment Manager: TB Page 8 of 34

9 CONSTRUCTION PRODUCTS Fire stopping and fire sealing products Part 3: Linear joints and gap seals ETAG 026 Fire stopping and fire sealing products Part 1: General ETAG 026 FIRE DETECTION COMPONENTS AND SYSTEMS Control Panels Design, installation, commissioning, and servicing of fire detection and alarm systems LPS 1014 Components using radio link LPS 1257 EN Control and indicating equipment EN 54-2 ISO :2003 Voice alarm control and indicating equipment Sound system control and indicating equipment EN ISO :2007 Alarm transmission and fault warning routing equipment EN ISO :2005 Power supplies EN 54-4 ISO :2003 Compatibility of fire detection of alarm systems LPS 1054 EN Manual call points BS 5839:Part 2 ISO :2011 EN Assessment Manager: TB Page 9 of 34

10 FIRE DETECTION COMPONENTS AND SYSTEMS Control Panels Line units - input/output devices - short-circuit isolators CEA GEI-052, EN EN Audible fire alarm devices - - sounders - beacons - loudspeakers EN 54-3 EN EN Fire detection and fire alarm systems Part 17: Shortcircuit isolators ISO :2009 Fire detection and fire alarm systems Part 18: Input/Output devices ISO :2017 Extinguishing systems, electrical automatic control and delay devices EN Detectors (commercial) Heat detectors EN 54-5 BS 5445:Part 5 ISO :2012 Heat detectors (high temperature) BS 5445:Part 8 Linear heat detector pren Duct detector LPS 1280 EN Smoke detectors EN 54-7 ISO :2011 BS 5445: Part 7 Assessment Manager: TB Page 10 of 34

11 Aspirating smoke detectors - point detectors EN CEA 4022 FIRE DETECTION COMPONENTS AND SYSTEMS Detectors (commercial) Optical beam smoke detector BS 5839:Part 5 EN ISO :2014 Flame detectors EN ISO :2012 Multisensor fire detectors CEA 4021 ISO :2014 EN Carbon monoxide fire detector - with heat enhancement detector - with heat and optical detection LPS 1265, ISO :2004 LPS 1274 LPS 1279 EN EN EN Detectors (domestic) Domestic smoke detectors BS 5446:Part 1:2000 EN Domestic carbon monoxide detectors BS 7860 EN Heat detectors BS :2003 Smoke alarms for the deaf and hard of hearing BS :2015 Assessment Manager: TB Page 11 of 34

12 Cables Armoured fire-resistant cable V BS 7846:2009 FIRE DETECTION COMPONENTS AND SYSTEMS Cables Thermoset insulated cables BS 7629:Parts 1 and 2 Mineral insulated cables rating not exceeding 750 v BS EN Fire detection and fire alarm systems for buildings - cables BS , Clauses 26.2d and 26.2e Cables required to maintain circuit integrity under fire conditions BS 6387 Unprotected small cables for use in emergency circuits EN BS BS Fire resistance requirements for electric cables IEC331 IEC Parts 21, 23, 25 and 31 Cables for smoke and heat control systems and other active fire safety systems BS BS 8491 Selection and installation of fire-resistant power and control cable systems BS 8519:2010 (Clause 11 only) Fire resistant vertically mounted bunched wires or cables IEC EN EN Assessment Manager: TB Page 12 of 34

13 Cables with enhanced performance burning under defined conditions BS EN EN IEC FIRE DETECTION COMPONENTS AND SYSTEMS Cables Cables with enhanced performance under combustion conditions BS EN IEC EN and 3 IEC FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS Fire hose reels European s Fixed fire protection systems LPS 1048 Pumps LPS 1131 Pipe couplings, flexible hoses, plastic pipes LPS 1219, 1260, 1261 Fire hose couplings and ancillary equipment BS 336:1989 Fire fighting hoses - semi-rigid hoses for fixed systems BS 694 Non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes BS 6391 Sprinkler heads LPS 1039 and EN Valves LPS 1040 Assessment Manager: TB Page 13 of 34

14 FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS Tanks LPS 1254 Components for sprinkler and water spray systems - Wet alarm valve assemblies BS EN (A2) Components for sprinkler and water spray systems - Dry alarm valve assemblies BS EN (A2) Components for sprinkler and water spray systems - Water motor alarms BS EN (A1) Components for sprinkler and water spray systems - Water flow detectors BS EN :2002 Fixed gaseous fire extinguishing systems LPS 1230 Gaseous fire extinguishing systems - physical properties and system design - Part 1 BS ISO :2006 and BS EN SD 022 Installation, repair and servicing of portable fire extinguishers BS :2009 SP 101 Above ground suction tanks for sprinkler systems LPS 1276 Fire Hydrant systems - Landing Valves for wet risers SD141 - BS :1987 Fire hydrant systems - Inlet breechings for dry riser inlets SD BS Fire blankets BS EN 1869:1997 Portable fire extinguishers EN 3 BS 7937:2000 BS 6165:2012 Assessment Manager: TB Page 14 of 34

15 FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS. Components for halon and carbon dioxide fire extinguishing systems. Requirements and containers. Components for halon and carbon dioxide fire extinguishing systems. Requirements and testing procedures for container valves. LPS 1023 LPS 1024 Components for halon and carbon dioxide fire extinguishing systems. Requirements and testing procedures for nozzles. LPS 1027 Components for halon and carbon dioxide fire extinguishing systems. Requirements and testing procedures for valve actuating mechanisms. LPS 1025 Requirements and test methods for electrical automatic control and delay devices BS EN :2003 Non-electrical automatic control and delay devices BS EN :2003 Manual triggering and stop devices BS EN :2003 High pressure container valve assemblies and their actuators BS EN :2004 High and low pressure selector valves and their actuators for CO2 systems BS EN :2006 Non electrical disable devices for CO2 systems BS EN :2006 Nozzles for CO2 systems BS EN :2001 Flexible connectors CO2 systems BS EN :2006 Assessment Manager: TB Page 15 of 34

16 FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS Special fire detectors BS EN :2003 Pressure gauges and pressure switches BS EN Mechanical weighing devices BS EN :2003 Pneumatic alarm devices BS EN :2003 Check valves and non-return valves BS EN :2001 Odorizing devices for CO2 low pressure systems BSEN :2003 Pressure gauges pren :2012 Compatibility of components BS EN :2003 Electronic Security s Scheme document for the certification of electronic security products SD218 Alarm systems Intrusion and hold-up systems Part 2-2 Intrusion detectors Passive infrared detectors EN :2008 Alarm systems Intrusion and hold-up systems Part 2-3 Requirements for microwave detectors EN :2008 Alarm systems Intrusion and hold-up systems Part 2-4 Requirements for combined passive infrared and microwave detectors EN :2008 Alarm systems Intrusion and hold-up systems Part 2-6 Opening contacts (magnetic) EN :2008 Assessment Manager: TB Page 16 of 34

17 Electronic Security s Alarm systems Intrusion and hold-up systems Part 3 Control and indicating equipment Alarm systems Intrusion and hold-up systems Part 6 Power supplies EN :2009 EN :2008+A1:2014 Alarm systems Intrusion and hold-up systems Part 4: Warning devices EN :2009 Alarm systems Intrusion and hold-up systems Part 10 Supervised Premises Transceivers EN :2014 Alarm systems Alarm transmission systems and equipment Part 2: Requirements for Supervised Premises Transceiver (SPT) EN :2013 Alarm systems Alarm transmission systems and equipment Part 3: Requirements for Receiving Centre Transceiver (SPT) EN :2013 Alarm and electronic security systems Part 11-1: Electronic access control systems system and components requirements EN :2013 Requirements for LPCB approval and listing of alarm transmission equipment LPS1277_3.1:2014 Passive fire protection products Scheme document for certification of passive fire protection products SD198 and SD0228 Self supporting double skin metal faced insulating panels BS EN 14509:2006 Assessment Manager: TB Page 17 of 34

18 Passive fire protection products Pedestrian doorsets, industrial, commercial, garage doors and windows. standard, performance characteristics. Fire resistance and/or smoke control characteristics BS EN 16034:2014 Smoke and heat control systems. Smoke duct sections BS EN :2011 Smoke and heat control systems. Smoke control dampers BS EN :2011 Smoke and heat control systems. Specification for natural smoke and heat exhaust ventilators BS EN :2003 Smoke and heat control systems. Specification for powered smoke and heat exhaust ventilators BS EN :2002 Test and Evaluation Requirements for the LPCB Approval and Listing of Fire Doorsets, Lift Landing Doors and Shutters. LPS1056 Requirements, Tests and Methods of Assessment of Passive Fire Protection for Structural Steel (Board and cementitious products). LPS 1107 Requirements and Tests for LPCB Approval of Wall and Floor and Linear Gap Seals. LPS 1132 Requirements and tests for the LPCB Approval and Listing of Fire Dampers. LPS 1162 Requirements and Tests for Built-up cladding and Sandwich Panel Systems for use as the External Envelope of Buildings LPS 1181:Part 1 Assessment Manager: TB Page 18 of 34

19 Passive fire protection products Requirements and Tests for Sandwich Panels and Built-up systems for use as internal constructions in buildings. LPS 1181:Part 2 Fire Test and Evaluation requirements for the LPCB Approval and Listing of temporary buildings for use on construction sites. Requirements for the LPCB Approval and Listing for Fire Performance of Temporary Protective Covering Materials for Use in the Interior of Buildings. LPS 1195 Part 1 LPS 1207 LPCB Fire resistance requirements for elements of construction used to provide compartmentation LPS 1208 Requirements for the LPCB Approval and Listing for Fire Performance of Containment Net and Sheet Materials for External Use on Construction Sites LPS 1215 Requirements for the LPCB Approval and Listing of the Fire Performance of Grease Filters used in Commercial Kitchen Extract Systems LPS 1263 Fire test and performance requirements for Innovative Methods of Building Construction LPS 1501 Test and Evaluation Requirements for the LPCB Approval and Listing of Roofing Systems Protection against Fire from Outside the Building LPS 1505 Requirements and Tests for LPCB approval of Nonload bearing External Cladding Systems applied to the masonry face of a building LPS 1581 Requirements and Tests for LPCB approval of Nonload bearing External Cladding Systems fixed to and supported by a structural steel frame LPS 1582 Assessment Manager: TB Page 19 of 34

20 Passive fire protection products LPCB/BWF Approval scheme for Fire Protected Stairs BD2569 Fire resistant ducts BS 476:Part 24 BS EN :2014 Smoke barriers Natural smoke and heat exhaust ventilators BS EN 12101:Part 1:2006 BS EN 12101:Part 2:2003 Reaction to Fire (RTF) classifications for Materials and s Non-combustible, Class 0 or BS EN Classified products Fire Protection for Structural Steel - Intumescent Thin Film Coating Systems. BS 476: Part 21 EN 13381: Part 8 Cables Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements EN 50575:2014 Test on gases evolved during combustion of materials from cables. Determination of the halogen acid gas content EN :2014 Test on gases evolved during combustion of materials from cables. Determination of acidity (by ph measurement) and conductivity EN :2014 Assessment Manager: TB Page 20 of 34

21 SUSTAINABLE PRODUCTS MCS Installer Certification: Solar Heating Solar PV Micro and Small Wind Turbines Biomass Heat Pumps Micro CHP MCS Installation s: (DECC) MIS 3001-Solar Thermal MIS 3002-Solar Photovoltaic MIS 3003-Micro & Small Wind Turbines MIS 3004-Biomass MIS 3005-Heat pump systems MIS 3007-Micro CHP MCS 001-Installer certification scheme requirements MCS Additional Requirements for MCS Installation Companies to become Green Deal Authorised Solar Collectors Micro and Small Wind Turbines Heat Pumps Micro and Small Wind Turbines Biomass Roof mounting kits MCS 004-Solar Collectors MCS 006-Micro and Small Wind Turbines MCS 007-Heat Pumps MCS 006-Micro and Small Wind Turbines MCS 008-Biomass MCS 012 Pitched Roof Installation Kits MCS Certification Heat-led Micro - Co Generation Packages Electricity led Micro-Co Generation Packages MCS Scheme Requirements: (DECC) MCS 014-CHP MCS 015-CHP MCS 010-Generic factory production control MCS 011-Testing and acceptance criteria Assessment Manager: TB Page 21 of 34

22 SUSTAINABLE PRODUCTS Environmental Profiles of Construction s BRE Scheme Document SD 028 Certification activities associated with the assessment of environmental performance for: a. Master planning; b. New construction of buildings; c. Buildings in use; d. Refurbishment of buildings; e. New construction of infrastructure; in the UK and Internationally BRE Scheme Document SD123 BREEAM Scheme Document Responsible Sourcing in accordance with BES 6001 Framework for Responsible Sourcing BRE Global Scheme Document SD186, incorporating BES6001 Framework for Responsible Sourcing END Assessment Manager: TB Page 22 of 34

23 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 Annex V-, 96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 EN 54-5:2000/A1:2002 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006 EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-11:2001 EN 54-11:2001/A1:2005 EN 54-12:2002 EN 54-12:2015 EN 54-16:2008 EN 54-17:2005 EN 54-17:2005/AC:2007 EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-21:2006 EN 54-23:2010 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012 EN 671-1:2001 EN 671-1:2001/AC:2002 EN 671-1:2012 EN 671-2: 2001 EN 671-2:2001/A1:2004 EN 671-2:2012 EN 15650:2010 Assessment Manager: TB Page 23 of 34

24 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 Annex V-, 96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) EN :2003 EN :2003 EN :2003 EN :2004 EN :2006 EN :2006 EN :2000 EN :2000/A1:2005 EN :2006 EN :2003 EN :2003 EN :2003 EN :2003 EN :2001 EN :2001/AC:2002 EN :2003 EN :2002 EN :2011 EN :2011 EN :1999 +A1:2001 EN :1999+A1:01/A2:04 EN :1999+A1:01/A3:06 EN :1999/A1:2001 EN :1999/A2:2005 EN :1999/AC:2002 EN :2000/A1:2001 EN :2000/A2:2005 EN :2000/A1:2001 EN :2002 EN 14604:2005 EN 14604:2005/AC:2008 Assessment Manager: TB Page 24 of 34

25 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Annex V - FPC certification body to system 2+ 96/581/EC Geotextiles (1/2) EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13254:2000 The Construction s Regulation (EU) No 305/2011 Annex V - FPC certification body to system 2+ 96/581/EC Geotextiles (1/2) EN 13254:2000/A1:2005 EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 Annex V- 96/582/EC Metal anchors for use in concrete (mechanical fasteners ETAG ETAG ETAG ETAG Amendment ETAG ETAG ETAG ETAG Amendment Assessment Manager: TB Page 25 of 34

26 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation The Construction s Regulation (EU) No 305/2011 Conformity Assessment procedure/ Module/article Annex V- Category of products or individual products 96/582/EC Structural sealant glazing kits of types (curtain walling) : - Structural sealant glazing kits, Types II and IV (for external walls and roofs). Essential requirements: specification / Properties/s ETAG ETAG ETAG Annex V - FPC certification body to system 2+ 97/176/EC Structural timber products (1/3) EN 14250:2010 Annex V - FPC certification body to system 2+ 97/462/EC Wood-based panels (1/2) EN 13986:2004 Annex V - 97/462/EC Wood-based panels (1/2) EN 13986:2004 Annex V - 97/462/EC Wood-based panels (2/2) EN 13986:2004 Annex V - 99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) EN :2006+A1:2010 Annex V - FPC certification body to system 2+ 97/463/EC Plastic anchors for use in concrete and masonry (1/1 ETAG 014 Assessment Manager: TB Page 26 of 34

27 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Annex V - 97/556/EC External thermal insulation composite systems/kits with rendering (ETICS)(1/1) ETAG 004 Version 08/2011 Annex V - FPC certification body to system 2+ 97/556/EC External thermal insulation composite systems/kits with rendering (ETICS)(1/1) ETAG 004 Version 08/2011 The Construction s Regulation (EU) No 305/2011 Annex V - FPC certification body to system 2+ 97/638/EC Fasteners for structural timber products (1/1) ETAG 015 Annex V - FPC to system 2+ 98/143/EC Systems of mechanically fastened flexible roof waterproofing membranes (1/1) ETAG 006 Annex V - 98/213/EC Internal partition kits (1/5 ETAG 003 Annex V - FPC to system 2+ 98/279/EC Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and sometimes, concrete (1/1) ETAG 004 Version 08/2011 ETAG 009 Assessment Manager: TB Page 27 of 34

28 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Annex V - Category of products or individual products 98/279/EC Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and sometimes, concrete (1/1) Essential requirements: specification / Properties/s ETAG 004 Version 08/2011 ETAG 009 Annex V /456/EC Post-tensioning kits for the prestressing of structures (1/1) ETAG 013 The Construction s Regulation (EU) No 305/2011 Annex V - 98/599/EC Liquid applied roof waterproofing kits (3/3) ETAG 005 Annex V - 98/600/EC Self-supporting translucent roof kits (except glass-based kits) (3/3) ETAG 010 Annex V - FPC to system 2+ 99/89/EC Prefabricated stair kits (1/2) ETAG 008 Annex V - 99/89/EC Prefabricated stair kits (2/2) ETAG 008 Assessment Manager: TB Page 28 of 34

29 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 Annex V - 99/91/EC Thermal insulating products (2/2) EN 13162:2008 EN 13162:2012 EN 13163:2008 EN 13163:2012 EN 13164:2008 EN 13164:2012 EN 13165:2008 EN 13165:2012 EN 13166:2008 EN 13166:2012 EN 13167:2008 EN 13167:2012 EN 13168:2008 EN 13168:2012 EN 13169:2008 EN 13169:2012 Annex V - 99/91/EC Thermal insulating products (2/2) EN 13170:2008 EN 13170:2012 EN 13171:2008 EN 13171:2012 Annex V - 99/92/EC Light composite woodbased beams and columns (1/1 ETAG 011 Assessment Manager: TB Page 29 of 34

30 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 Annex V - 99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003 Annex V - 99/454/EC Fire stopping, fire sealing and fire protection products (1/2) ETAG ETAG ETAG ETAG ETAG Amendment Annex V - 99/454/EC Fire stopping, fire sealing and fire protective products (2/2) ETAG ETAG ETAG ETAG ETAG Amendment Annex V - 99/455/EC Timber frame and log prefabricated building kits (1/1) ETAG 007 ETAG 012 Annex V /447/EC Prefabricated wood-based load-bearing stressed skin panels and selfsupporting composite lightweight panels (1/6) ETAG 019 Assessment Manager: TB Page 30 of 34

31 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 Annex V /447/EC Prefabricated wood-based load-bearing stressed skin panels and selfsupporting composite lightweight panels (3/6) ETAG ETAG ETAG ETAG ETAG 019 As a Technical Assessment Body (TAB) for developing European Assessment Documents Annex IV TAB Areas 1 Precast normal /lightweight/autoclaved aerated concrete products. 2 Doors, windows, shutters, gates and related building hardware. 3 Membranes, including liquid applied and kits (for water and/or water vapour control). 4 Thermal insulation products. Composite insulating kits/systems. As a Technical Assessment Body (TAB) for developing European Assessment Documents Annex IV TAB Areas 7 Gypsum products. 8 Geotextiles, geomembranes, and related products. 9 Curtain walling/cladding/structural sealant glazing. 10 Fixed fire fighting equipment (fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression product). Assessment Manager: TB Page 31 of 34

32 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/ Structural timber products/elements and ancillaries. 14 Wood based panels and elements. 15 Cement, building limes and other hydraulic binders. 16 Reinforcing and prestressing steel for concrete (and ancillaries). Post tensioning kits. 17 Masonry and related products. Masonry units, mortars, and ancillaries. 19 Foorings. 21 Internal & external wall and ceiling finishes. Internal partition kits. Assessment Manager: TB Page 32 of 34

33 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 As a Technical Assessment Body (TAB) for developing European Assessment Documents Annex IV TAB Areas 22 Roof coverings, roof lights, roof windows, and ancillary products. 25 Construction adhesives. 26 s related to concrete, mortar and grout. 27 Space heating appliances. 28 Pipes-tanks and ancillaries not in contact with water intended for human consumption. 30 Flat glass, profiled glass and glass block products. 31 Power, control and communication cables. 32 Sealants for joints. 34 Building kits, units, and prefabricated elements. 35 Fire stopping, fire sealing and fire protective products. Fire retardant products. Assessment Manager: TB Page 33 of 34

34 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Directive: Article 14, Annex III Regulation 42 Conformity Assessment Modules B, D, H, H1 Portable fire extinguishers Components for water and gas fire suppression and extinguishing systems Scheme SD052 QP2 Series procedures Essential Health and Safety requirements Annex I of the Directive Directive 2014/90/EU: Chapter 4, Article 15 & Annex II Module B: EC Type Examination Module D: ion QA Module E: QA Module F: Verification Fire Protection Equipment MED 1./3.1, 3.2, 3.9, 3.11, 3.13, 3.14, 3.16 to 3.18, 3.22 to 3.29, 3.31 to 3.32, 3.35 to 3.38, 3.40, 3.42 to 3.43, 3.45 to 3.49, 3.56 s pursuant to Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU Pressure Equipment Directive 2014/68/EU implemented by; The Pressure Equipment (Safety) Regulations 2016 Marine Equipment Directive 2014/90/EU implemented by: The Merchant Shipping (Marine Equipment) Regulations 2016 ** END Assessment Manager: TB Page 34 of 34